(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

ideanote
inCAD Library

Please read before use

What is inCAD Library?

  • Helpful application examples for mechanical engineers.

The Concept of inCAD Library

  • Online application library with a range of ideas for all manufacturing industries.
  • Save design time and learn new design applications when you are concepting new machines.

Disclaimer

  • MISUMI may not offer all parts in each application design. Available parts can only be purchased separately not as a unit shown in each application design.
  • MISUMI does not guarantee quality, accuracy, functionality, safety or reliability for the combination of the parts in each application example. Accept these points prior to use.
  • 2014 Copyright MISUMI
  • The data cannot be used for any purposes (including sales promotion) except for designing your machine.
  • All associated CAD is free. Misumi reserves the right at its sole discretion to cancel, terminate or modify this offer.
  • MISUMI may change, add or delete application examples posted without prior notice.
  • MISUMI assumes no responsibilities for any damage incurred resulting from your use of the Service or any change, addition or deletion by MISUMI of the application examples for any reason whatsoever.

inCAD Library Features

  1. Get great new design ideas for these application examples.
  2. Over 300 design application ideas
    collected from dozens of industries!

  3. Find application examples quickly! Search by function, workpiece shape, etc.

  4. Download the CAD models for each application example.
  5. Log in to download free CAD models.
    Download CAD for the entire application example!

Good IDEA! button

Click the Good IDEA! Button when you like an application example!

*Can only be clicked once per application example.

  • Upper right corner on the page of application example details

  • Pop-up dialog for CAD data downloading

Page top

Keyword Search
No. Search
SNS: 

No.000158 Clamp that Utilizes Cam Followers

Motion of the clamp is guided by cam followers

Roller Followers

Product name Roller Followers - Solid
Part number NARTUC5
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Selecting the needle structure type that is hard to separate, for the concern of possible excessive load applied at clamp timing.

Back to page top

Available sizes

■Roller Followers - Solid

Grease No Seal With Seal Material
Crowned Flat Type Crowned Flat Type
General 52100 Bearing Steel
- 440C Stainless Steel
Low Rebound - - -

■Sizes and Dimensions

No Seal

O.D.
(mm)
I.D.
(mm)
Thickness(mm)
16 5 11
19 6
24 8 14
30 10
32 12

With Seal

O.D.
(mm)
I.D.
(mm)
Thickness(mm)
16 5 11
19 6
24 8 14
30 10
32 12
35 15 18.0
40 17 20.0
47 20 24.0

Back to page top

Accuracy Info

■Accuracy Information of Roller Followers

Shaft Dia. Tolerance:
 0
-0.008(mm)
Roller Dia. Tolerance:
 0
-0.005(mm)

Back to page top

Performance info.

■Speeds・Loads (Load info.) of roller followers

No Seal

I.D.
- O.D.
Basic Dynamic Load Rating
C(kN)
Basic Static Load Rating
Cor(kN)
Track Load
Capacity (kN)
Max. Rotational Speed (rpm)
Crowned Flat
Type
Crowned Flat
Type
Crowned Flat
Type
φ5 -φ16 2.84 6.46 2.65 7.81 1.08 25000 10500
φ6 -φ19 3.33 7.58 3.35 10.2 1.37 20000 8700
φ8 -φ24 5.68 11.7 5.89 15.6 1.86 17000 7000
φ10-φ30 7.94 15.8 7.59 18.5 2.45 15000 5700
φ12-φ32 8.53 17.0 8.44 21.0 2.74 13000 5200

With Seal

I.D.
- O.D.
Basic Dynamic Load Rating
C(kN)
Basic Static Load Rating
Cor(kN)
Track Load
Capacity (kN)
Max. Rotational Speed (rpm)
Crowned Flat
Type
Crowned
Type
Flat
Type
Crowned
Type
Flat
Type
φ5 -φ16 2.84 6.46 2.65 7.81 1.08 10000 4200
φ6 -φ19 3.33 7.58 3.35 10.2 1.37 8000 3480
φ8 -φ24 5.68 11.7 5.89 15.6 1.86 6800 2800
φ10-φ30 7.94 15.8 7.59 18.5 2.45 6000 2280
φ12-φ32 8.53 17.0 8.44 21.0 2.74 5200 2080
φ15-φ35 13.7 25.3 16.4 36.9 3.14 4000 1720
φ17-φ40 17.4 32.0 19.3 46.6 3.72 3800 1560
φ20-φ47 22.9 41.7 30.6 67.7 7.15 3200 1360

Back to page top

Roller Follower Pins Threaded

Product name Roller Follower Pins - Threaded
Part number FSRFN5-25-F6
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

It is easy to install because one side has a head.

Back to page top

Available sizes

■Roller Follower Pins - Threaded

Material Surface Treatment
1045 Carbon Steel Black Oxide
304 Stainless Steel -

■Sizes and Dimensions

Pin Dia.
(mm)
Pin Length
(mm)
Thread Length
(mm)
5 20, 25, 30 14
6 30, 32, 34, 36
8 30, 32, 34, 36, 38 16
10 36, 38, 42 19
12 38, 42, 46 22
15 38, 42, 46, 50 25
17 28
20 38, 42, 46, 50, 54 31

Back to page top

Hinge Pin

Product name Hinge Pins - Flanged, Hex Socket Head, Threaded with Lock Nut
Part number SCLBR4-20
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

It enables one to obtain the components that normally require large amount of machining such as flange by ready-made products.

Back to page top

Available sizes

■Hinge Pins - Flanged, Hex Socket Head, Threaded with Lock Nut

Material Hardness Surface Treatment Included nut material
Standard nut U nut
1045 Carbon Steel - Black Oxide SWRCH Carbon Steel 1018 Carbon Steel
40 - 45HRC
- Electroless Nickel Plating 304 Stainless Steel 304 Stainless Steel
40 - 45HRC
Plating hardness 750HV - Hard Chrome Plating
Plating Thickness 3 μm or more
SWRM Low Carbon Steel 1018 Carbon Steel
304 Stainless Steel - - 304 Stainless Steel 304 Stainless Steel
440C Stainless Steel 45 - 50HRC
45 - 50HRC
Plating hardness 750HV -
Hard Chrome Plating
Plating Thickness 3 μm or more

■Sizes and Dimensions

Pin Dia. Pin section length
(Configurable in 0.1 mm increment)
Head O.D. Head Height Thread Length Thread Dia. X Pitch
φ4 10.0-50.0 φ7 5 6 M3×0.5
φ5 10.0-60.0 φ9 M4×0.7
φ6 10.0-100.0 φ10 9 M5×0.8
φ8 10.0-100.0 φ13 M6×1.0
φ10 φ16 12 M8×1.25
φ12 10.0-200.0 φ18 16 M10×1.5
φ13 20.0-200.0 φ24 18 M12×1.75
φ14
φ15
φ16 20.0-200.0
φ17
φ18 24
φ20 φ27 M16×2.0
φ22 20.0-200.0
φ25 φ30

Back to page top

Accuracy Info

■Pivot pin (Flanged with Hex socket with a nut: Pin O.D. tolerance (g6))

Pin Dia. Tolerance
φ4-φ6 -0.004
-0.012
φ8・φ10 -0.005
-0.014
φ12-φ18 -0.006
-0.017
φ20・φ22・φ25 -0.007
-0.020

Back to page top

IDEA NOTE Cam follower wedge

Cam follower and wedge are used to allow for easy rolling motion and to minimize dust generation.

  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Download (Unit Assembly)

    CAD Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when you find interesting design tips.


    This data is utilized in order to list more useful application examples in the future.

    CAD Data Limitations

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. Unit assembly Data consists of some sub-assemblies.
      It is configured so that each sub-assembly unit can be used as it is or edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The Data including the third-part components are made by the Company.

    Page top

  • * Unit assembly Data consists of some sub-assemblies.
       It is configured so that each sub-assembly unit can be used as it is or edited.

Application Overview

Purpose

  • Purpose
    • To allow for easy clamping of workpiece.
  • Operation
    • Lift lever arm to clamp workpiece.
    • Lower lever arm to release workpiece.

Points for use

  • This design is suitable for applications that require low dust generation.

Target workpiece

  • Shape: stepped block
  • Size: W40xD38xH44mm

Design Specifications

Operating Conditions or Design Requirements

  • Clamp angle when fixed:52°
  • Outer dimensions: W62xD226xH187mm

Selection Criteria for Main Components

  • To reduce the friction coefficient, the same material is employed in the roller follower and the plate cam and Wedge

    An object that is made thick at one end and becomes thinner toward the other end. It is designed to be driven into a clearance to put pressure on two objects so that they do not separate from each other.

    .

Design Evaluation

Verification of main components

  • The tightening force during workpiece clamping is verified.
  • Tightening force during workpiece clamping
    • Conditional value:Wedge

      An object that is made thick at one end and becomes thinner toward the other end. It is designed to be driven into a clearance to put pressure on two objects so that they do not separate from each other.

      tip θ1 = 14°, friction coefficient μ = 0.4, wedge driving force F1 = 3kgf, gravitational acceleration g = 9.8m/
    • The tightening force during clamping (face pressure on plate cam) F2 is
      F2=F1/(2×(μ×cosθ+sinθ)) therefore, F2=3×9.8/(2×(0.8×cos14°+sin14°))=23N

Other Design Consideration

  • Wedge

    An object that is made thick at one end and becomes thinner toward the other end. It is designed to be driven into a clearance to put pressure on two objects so that they do not separate from each other.

    mechanism was also designed to lock arm position when clamping workpiece
  • The mechanism in this application example operates with a clamping movement from the bottom to the top.

Explore Similar Application Examples

Page - / -

Part List

No. Part Name Sample Picture MISUMI Part Number
For Price and Days to ship click on Part No.
Quantity
1 Stop Pins SSTFH5.5-7 1
2 Hinge Pins SCLBR8-18 1
3 Roller Followers NARTUC5 1
4 Follower Pin FSRFN5-25-F6 1
5 Hinge Pins FCBDR10-18-A16-E3-F6 1
6 Spring Plungers PJHW5-3 1
7 Stop Pins SSTFH5.5-2 1
8 Hinge Pins SCLBR4-20 1
9 Hinge Pins SCLBR8-10 1
  • The part list above only contains MISUMI parts.
    Part list download (CSV) includes MISUMI and third party components used in this example.
  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Download (Unit Assembly)

    CAD Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when you find interesting design tips.


    This data is utilized in order to list more useful application examples in the future.

    CAD Data Limitations

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. Unit assembly Data consists of some sub-assemblies.
      It is configured so that each sub-assembly unit can be used as it is or edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The Data including the third-part components are made by the Company.

    Page top

Page top