(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

ideanote
inCAD Library

Please read before use

What is inCAD Library?

  • Helpful application examples for mechanical engineers.

The Concept of inCAD Library

  • Online application library with a range of ideas for all manufacturing industries.
  • Save design time and learn new design applications when you are concepting new machines.

Disclaimer

  • MISUMI may not offer all parts in each application design. Available parts can only be purchased separately not as a unit shown in each application design.
  • MISUMI does not guarantee quality, accuracy, functionality, safety or reliability for the combination of the parts in each application example. Accept these points prior to use.
  • 2014 Copyright MISUMI
  • The data cannot be used for any purposes (including sales promotion) except for designing your machine.
  • All associated CAD is free. Misumi reserves the right at its sole discretion to cancel, terminate or modify this offer.
  • MISUMI may change, add or delete application examples posted without prior notice.
  • MISUMI assumes no responsibilities for any damage incurred resulting from your use of the Service or any change, addition or deletion by MISUMI of the application examples for any reason whatsoever.

inCAD Library Features

  1. Get great new design ideas for these application examples.
  2. Over 300 design application ideas
    collected from dozens of industries!

  3. Find application examples quickly! Search by function, workpiece shape, etc.

  4. Download the CAD models for each application example.
  5. Log in to download free CAD models.
    Download CAD for the entire application example!

Good IDEA! button

Click the Good IDEA! Button when you like an application example!

*Can only be clicked once per application example.

  • Upper right corner on the page of application example details

  • Pop-up dialog for CAD data downloading

Page top

Keyword Search
No. Search
SNS: 

No.000154 Load Measurement

Load can only be applied during measurement.

Couplings

Product name Couplings - Slit, Clamping
Part number CPSSC32-12-14
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Shorter length and good declination performance

Back to page top

Available sizes

■Couplings - Slit, Clamping

Material Surface Treatment Accessory
Aluminum Alloy Anodized Hex Socket Head Cap Screw
Stainless Steel

■Sizes and Dimensions

O.D. (mm) Shaft bore Dia. (mm),
Driving Side
Shaft bore Dia. (mm),
Driven Side
Overall Length (mm) Set
Screw
Standard Type Short
φ12 *4 *4, *5 18.5 14 M2
*5 *5
φ16 *5 *5, *6 23 18 M2.5
*6 *6
φ20 *5 *6, 6.35, *8 26 20
*6 *6, 6.35, 7, *8
6.35 8
*8 *8
φ25 *5 *6 31 25 M3
*6 *6, 6.35, *8, *10
6.35 8, 10
*8 *8, 9.525, *10
9.525 10
*10 *10
φ32 *8 *8, 9.525, *10, 12 41 32 M4
9.525 10, 12
*10 *10, 11, *12, 14
*12 *12, *14
φ40 8 8, 10 56 M5
10 10
12 12, 14
14 14, 16
15 15
16 16

Short type is available for sizes marked with * only.

Back to page top

Accuracy Info

■Accuracy of coupling

Type O.D. (mm) Shaft Bore Tolerance Allowable Angular Misalignment
(°)
Lateral Misalignment
(mm)
Standard φ12 +0.5 for the same Dia.

Larger for different Dia.
Shaft Dia. +0.5, see
2 0.10
φ16
φ20
φ25 0.15
φ32
φ40 0.20
Short φ12 1
φ16
φ20
φ25
φ32

The shaft Dia. tolerance represents the tolerance before slit machining.

Back to page top

Performance info.

■Load info. on coupling

Type O.D. Allowable Torque
(N·m)
Max. Rotational Speed
(r/min)
Moment of Inertia
(kg·m²)
Aluminum
normal
φ12 0.4 52000 7.8×10 -8
φ16 0.5 39000 3.4×10 -7
φ20 1 31000 9.1×10 -7
φ25 2 25000 2.6×10 -6
φ32 4 19000 9.7×10 -6
φ40 8 15000 3.3×10 -5
Stainless
Steel Normal
φ12 0.3 52000 2.2×10 -7
φ16 0.5 39000 9.0×10 -7
φ20 1 31000 2.5×10 -6
φ25 2 25000 7.1×10 6
φ32 3.5 19000 2.7×10 -5
φ40 8 15000 9.0×10 -5
Aluminum
Short
φ12 0.4 52000 6.4×10 -8
φ16 0.5 39000 2.9×10 -7
φ20 1 31000 7.5×10 -7
φ25 2 25000 2.3×10 -6
φ32 4 19000 8.1×10 -6
Stainless
Steel Short
φ12 0.3 52000 1.8×10 -7
φ16 0.5 39000 7.8×10 -7
φ20 1 31000 2.1×10 -6
φ25 2 25000 6.3×10 -6
φ32 3.5 19000 2.2×10 -5

Back to page top

Roller Followers

Product name Roller Followers - Separate
Part number NASTFZS12
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Effective as a cam follower to convert circular motion to linear reciprocating motion

Back to page top

Available sizes

■Roller Followers - Separate

Grease No Seal With Seal Material
Crowned Flat Type Crowned Flat Type
General 52100 Bearing Steel
440C Stainless Steel
Low Particle Generation

■Sizes and Dimensions

O.D.
(mm)
I.D.
(mm)
Thickness (mm)
No Seal With Seal
19 6 9.8 13.8
24 8
30 10 11.8 15.8
32 12
35 15
40 17 15.8 19.8
47 20

Back to page top

Accuracy Info

■In the order of accuracy information of roller followers

Shaft Dia. Tolerance:
0
-0.008(mm)
Roller Dia. Tolerance:
0
-0.005(mm)

Back to page top

Performance info.

■Speeds·Loads (Load info.) of roller followers

I.D.
- O.D.
Basic Dynamic Load Rating C (kN) Basic Static Load Rating Cor (kN) Max. Allowable Load (kN) Track Load Capacity (kN) Max. Rotational Speed (rpm)
No Seal With Seal
Crowned Flat
Type
Crowned Flat
Type
No Seal With Seal
φ6−φ19 4.12 4.55 0.36 1.37 3.53 1.37 3.53 20000 8000
φ8−φ24 5.68 5.89 0.78 1.86 4.02 1.86 4.51 17000 6800
φ10−φ30 9.7 9.67 1.42 2.45 5.59 2.45 6.86 15000 6000
φ12−φ32 10.4 10.9 2.11 2.74 5.98 2.74 7.35 13000 5200
φ15−φ35 12.3 14.3 4.73 3.14 8.04 10000 4000
φ17−φ40 17.4 20.9 5.81 3.72 11.8 9500 3800
φ20−φ47 19.2 24.5 4.61 13.8 8500 3400

Back to page top

Hinge Pin

Product name Precision Pivot Pins - Straight, Retaining Rings
Part number SCCG12-28
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Effective as the roller shaft of a cam follower

Back to page top

Available sizes

■Precision Pivot Pins - Straight, Retaining Rings

Material Hardness Surface Treatment Accessory
1045 Carbon Steel Black Oxide Retaining Ring 2 pc. Spring Steel
40 - 45 HRC
Electroless Nickel Plating 304 Stainless Steel
40 - 45 HRC
Plating hardness 750 HV - Hard Chrome Plating Spring Steel
plating thickness 3 μm or more
304 Stainless Steel 304 Stainless Steel
440C Stainless Steel 45 - 50 HRC
45 - 50 HRC Hard Chrome Plating
Plating hardness 750 HV - plating thickness 3 μm or more

■Sizes and Dimensions

Pin Dia. Pin Section Length
(Configure in 0.1mm increment)
φ2 5.0- 30.0
φ3 5.0- 50.0
φ4
φ5 10.0- 60.0
φ6 10.0-100.0
φ8
φ10 15.0-100.0
φ12 15.0-200.0
φ13 25.0-200.0
φ14
φ15
φ16 30.0-200.0
φ17
φ18
φ20
φ22
φ25

Back to page top

Accuracy Info

■Pivot pin Dia. Tolerance (g6) for Hinge Pin Straight Retaining Ring Type

Pin Dia. Tolerance
φ2・φ3 -0.002
-0.008
φ4-φ6 -0.004
-0.012
φ8・φ10 -0.005
-0.014
φ12-φ18 -0.006
-0.017
φ20-φ25 -0.007
-0.020

Back to page top

IDEA NOTE The load cell is moved up and down by a cam.

The cam causes the load cell to stroke 1.5mm. As the load is applied to the bearing of the cam shaft, the load is not applied to the vertical movement mechanism.

  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Download (Unit Assembly)

    CAD Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when you find interesting design tips.


    This data is utilized in order to list more useful application examples in the future.

    CAD Data Limitations

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. Unit assembly Data consists of some sub-assemblies.
      It is configured so that each sub-assembly unit can be used as it is or edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The Data including the third-part components are made by the Company.

    Page top

  • * Unit assembly Data consists of some sub-assemblies.
       It is configured so that each sub-assembly unit can be used as it is or edited.

Application Overview

Purpose

  • To measure load that is applied to the bushing when press fitted into the nylon gear.
  • The measurement rod extends to the transfer surface via a cam mechanism during load measurement.

Points for use

  • There is no protrusion on the transfer line.

Target workpiece

  • Bushing
    Size: φ100mm, weight 10N

Design Specifications

Operating Conditions or Design Requirements

  • Vertical stroke: 1.5mm
  • Outer dimensions: W314 x D115 x H226mm

Required Performance

  • Load: lift part = 7N

Selection Criteria for Main Components

  • In order to lift a load of 7N (for a maximum lift height of 1.5mm) with a cam having a radius of 30mm, a motor with a torque of 0.25Nm or higher is selected.

Design Evaluation

Verification of main components

  • The load torque is verified based on the workpiece load.
    • Calculation of load torque: radius 30mm, load 7N, T = 0.03 x 7 = 0.21N·m

Other Design Consideration

  • By installing the whole unit below the transfer surface, space can be saved.
  • A ball spline can be used as both a vertical guide and cam follower rotation stopper.
  • The load is conveyed via the rod in the loose hole to the load cell, which is placed on the spline.

Explore Similar Application Examples

Page - / -

Part List

No. Part Name Sample Picture MISUMI Part Number
For Price and Days to ship click on Part No.
Quantity
1 Couplings CPSSC32-12-14 1
2 Ball Bearing SB6004ZZNR 2
3 Roller Followers NASTFZS12 1
4 Precision Pivot Pins SCCG12-28 1
5 Parallel Keys KESS6-20 1
6 Retaining Rings-External STWS20 2
7 Set Screws Dimple MSSU5-6 1
8 Hex Socket Set Screws MSSU6-10 1
  • The part list above only contains MISUMI parts.
    Part list download (CSV) includes MISUMI and third party components used in this example.
  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Download (Unit Assembly)

    CAD Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when you find interesting design tips.


    This data is utilized in order to list more useful application examples in the future.

    CAD Data Limitations

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. Unit assembly Data consists of some sub-assemblies.
      It is configured so that each sub-assembly unit can be used as it is or edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The Data including the third-part components are made by the Company.

    Page top

Page top