(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
PBC Simplicity® Linear Bushings - With shoulder, multilayer PBC (Inches).
MISUMI
Aluminum bushings with shoulder, Frelon Gold®, recommended for working with bearing steels such as 52100. Inch dimensions, compatible with inch diameter shafts.
Days to Ship: | 5 Days or more |
---|
PBC Simplicity® Linear Bushings - With pilot flange, long, plastic bushing (Inches).
MISUMI
Frelon Gold® bushings incorporate a long aluminum housing with a pilot flange of selectable shape (circular, square or compact) which is not completely on the end of the bushings, leaving sufficient space for mounting from the opposite side of the installation. Dimensions in inches, compatible with inch diameter axles.
Days to Ship: | 5 Days or more |
---|
IGUS Iglide J Plain Bushings - With shoulder, plastic (Inches).
MISUMI
iglide® J shoulder bushings are manufactured with high-performance polymers and lubricants that provide excellent mechanical properties and make them maintenance-free. Ideal where low coefficient of friction and high wear resistance are required. Inch dimensions, compatible with inch bores and shafts.
Days to Ship: | 5 Days or more |
---|
IGUS DryLin R Bushings - Flanged housing, plastic bushing (Inches).
MISUMI
DryLin® bushings incorporating a configurable flanged aluminum housing (circular, square or compact) of standard length, with mounting holes, which can reduce assembly time as they are bolt-on. Inch dimensions, compatible with inch diameter shafts. Ideal for linear, rotary or oscillating applications.
Days to Ship: | 5 Days or more |
---|
IGUS DryLin R Bushings - Center flange, plastic bushing (Inches).
MISUMI
DryLin® bushings incorporate a configurable center flange housing (circular, square or compact) that allows a load to be placed near the center of the bushings to evenly distribute the load and space. Inch dimensions, compatible with inch diameter shafts. Ideal for linear, rotary or oscillating applications.
Days to Ship: | 5 Days or more |
---|
Oil Free Bushings - With pilot flange, Copper Alloy.
MISUMI
Spec-designed to have the flanges integrated into one in order to reduce the assembly time. Pilot: Prevents the oil free bushing from protruding toward the opposite side of its mounting side and allows for space saving. Center: Enables to mount a workpiec
Days to Ship: | Same day or more |
---|
Show Stock Products
Drymet LF Bushings - Flanged, multilayer (PTFE), LFG series.
Oiles
Drymet LF bushings incorporate an aluminum housing with a square flange ideal for time-saving assembly, thanks to its bolt-on design. These bushings have excellent wear resistance and a low coefficient of friction. They can be used with or without lubricant. The housing adds an anti-corrosion surface treatment, which makes it resistant to environments exposed to humidity.
Days to Ship: | Same day or more |
---|
Show Stock Products
Thrust Bushing 500SP1 - With shoulder, copper alloy, SPFG series.
Oiles
Thrust bushing made of copper, with incorporated solid lubricant (graphite). With high performance in heavy loads and at low speeds. Excellent wear resistance in areas where it is difficult to form an oil film, such as reciprocating movements, oscillating movements and frequent starts and stops. Excellent chemical and corrosion resistance. Radial load and thrust load can be received simultaneously with only this bushing.
Days to Ship: | Same day or more |
---|
Show Stock Products
Glytron F - PTFE bushings, straight, series 77B.
Oiles
Self-lubricating Glytron F (77B) bushing with anti-wear filler/solid lubricant added. It can be used completely without lubrication and has a low coefficient of static friction at start-up, which prevents stick-slip effect during operation. Even at high speeds. Can be used in a wide range of temperatures, from low to high (-200 to 200°C). Excellent chemical resistance and is suitable for the food industry.
Days to Ship: | Same day or more |
---|
Show Stock Products
Drymet LF Bushings - With shoulder, multilayer PTFE, LFF series.
Oiles
Drymet LF (LFF) shoulder bushing that can be used over a wide temperature range and has excellent chemical resistance. It is an oil-free bushing composed of three layers: Ethylene Tetrafluoride resin layer with filler, Sintered Copper layer and supporting metal. It can be used without lubrication and is very compact due to its thinness and light weight. It has a low coefficient of friction, stable under high load and low speed conditions, and has excellent wear resistance. When used in conjunction with lubricating oil, it can be used with a high PV value even in the medium and high speed range. It can be used over a wide range of temperatures, from low to high, and has excellent chemical resistance. Excellent dimensional stability, mechanical strength and thermal conductivity.
Days to Ship: | Same day or more |
---|
Show Stock Products
Oil Free Bushings - With shoulder, iglidur® J.
igus
Oil-free shoulder bushing suitable for high-speed applications, where the risk of stick-slip effect is reduced. Non-lubricated and maintenance-free bushing. Operating temperature from -50°C to +90°C. Low coefficient of friction in non-lubricated operation. Excellent vibration damping properties. Good chemical resistance. Ideal for shaft materials with low hardness. Low moisture absorption rate. Suitable for low and medium loads.
Days to Ship: | 8 Days or more |
---|
Oil Free Bushings - With shoulder, iglidur® X.
igus
Oil-free shoulder bushing with excellent resistance to high temperatures and chemicals. Excellent wear resistance and maintenance-free. Heat resistant during continuous operation -100 to +250°C (+315°C short term). Wide range of chemical resistance. High compressive strength. Low moisture absorption. Excellent wear resistance over the entire temperature range. Ideal for surface pressures up to 150 MPa.
Days to Ship: | 8 Days or more |
---|
Simplicity® Oil-Free Bushings - Food grade, enclosed.
PBC Linear
This option is suitable for Food Grade applications.
PBC Linear has combined Frelon material with precision bearing technology to create Simplicity® linear plain bearings. Simplicity self lubricating plain bearings can move in linear, oscillating, rotary, or any combination of motions at speeds exceeding 4 m/s (165 in/s).
Days to Ship: | 21 Days |
---|
Simplicity® Oil-Free Bushings - Food Grade, open.
PBC Linear
This option is suitable for Food Grade applications.
PBC Linear has combined Frelon material with precision bearing technology to create Simplicity® linear plain bearings. Simplicity self lubricating plain bearings can move in linear, oscillating, rotary, or any combination of motions at speeds exceeding 4 m/s (165 in/s).
Days to Ship: | 21 Days |
---|
Oil Free Bushings - Flange Type, made of metal, with mounting holes.
MISUMI
Assembly process can be reduced by the flange-integrated specification.
Days to Ship: | Same day or more |
---|
Show Stock Products
Oil-Free Bushings - Bearing type, wide block, multi-layer bushing.
MISUMI
Suitable for horizontal use. Reduces the time of manufacturing and assembling the housing. Sufficient clamping strength can be obtained by 4-Mounting Hole.
Days to Ship: | 8 Days or more |
---|
Oil Free Bushings - Bearing type, compact high block, multilayer bushing.
MISUMI
Suitable for horizontal use. Reduces the time of manufacturing and assembling the housing. More compact housing compared to Housing Unit - Tall Blocks, Standard.
Days to Ship: | 8 Days or more |
---|
Oil Free Bushings - Bearing type, high block, polyacetal bushing.
MISUMI
Suitable for horizontal use. Reduces the time of manufacturing and assembling the housing.
Days to Ship: | 8 Days or more |
---|
Oil Free Bushings - With pilot flanged housing, copper alloy.
MISUMI
Suitable for vertical use. Reduces the time of manufacturing and assembling the housing. Since Oil Free Bushings do not project from bushing mounting position, space can be saved on opposite of mounting side.
Days to Ship: | Same day or more |
---|
Show Stock Products
Oil Free Bushings - With center flange housing. copper alloy.
MISUMI
Suitable for vertical use. Reduces the time of manufacturing and assembling the housing. Workpiece located near the center of the bushing provides balanced load and clearance on both sides of the flange.
Days to Ship: | 8 Days or more |
---|
Oil Free Bushings - Bearing type, high compact block, copper alloy.
MISUMI
Suitable for horizontal use. Reduces the time of manufacturing and assembling the housing. More compact housing compared to Housing Unit - Blocks, Standard.
Days to Ship: | Same day or more |
---|
Show Stock Products
Oil Free Bushings - Bearing type, compact wide block, copper alloy.
MISUMI
Suitable for horizontal use. Reduces the time of manufacturing and assembling the housing. More compact housing compared to Housing Unit - Wide Blocks, Standard.
Days to Ship: | Same day or more |
---|
Show Stock Products
Oil Free Bushings - Bearing type, high standard block, copper alloy.
MISUMI
Suitable for horizontal use. Reduces the time of manufacturing and assembling the housing. More compact in width (W Dimension) compared to Wide Blocks Type.
Days to Ship: | 8 Days or more |
---|
Oil Free Bushings - In cylindrical housing.
MISUMI
Spec-designed to reduce the time of manufacturing and installing a housing.
Days to Ship: | Same day or more |
---|
Show Stock Products
Oil Free Bushings - Bearing type, standard high block, multilayer bushing.
MISUMI
Suitable for horizontal use. Reduces the time of manufacturing and assembling the housing. More compact in width (W Dimension) compared to Wide Blocks Type.
Days to Ship: | Same day or more |
---|
Show Stock Products
Oil Free Bushings - Flanged housing, Polyacetal bushing.
MISUMI
Suitable for vertical use. Reduces the time of manufacturing and assembling the housing.
Days to Ship: | Same day or more |
---|
Show Stock Products
PBC Simplicity® Linear Bushings - Straight, Multilayer (Inches).
MISUMI
Aluminum straight bushings, Frelon Gold®, recommended to work with bearing steels such as 52100. Inch dimensions, compatible with inch diameter shafts.
Days to Ship: | 5 Days or more |
---|
PBC Simplicity® Linear Bushings - With pilot flange, plastic bushing (Inches).
MISUMI
Frelon Gold® bushings incorporate an aluminum housing with a pilot flange of selectable shape (circular, square or compact) which is not completely on the end of the bushings, leaving sufficient space for mounting from the opposite side of the installation. Dimensions in inches, compatible with inch diameter axles.
Days to Ship: | 5 Days or more |
---|
PBC Simplicity® Linear Bushings - With center flange, plastic bushing (Inches).
MISUMI
Frelon Gold® bushings incorporate a configurable center flange housing (circular, square or compact) that allows a load to be placed near the center of the bushings to evenly distribute the load and space. Inch dimensions, compatible with inch diameter axles.
Days to Ship: | 5 Days or more |
---|
IGUS DryLin R Plain Bushings - Straight, plastic (Inches).
MISUMI
DryLin® bushings are ideal for linear, rotary or oscillating applications. Their shape and material make them excellent in extremely demanding environments. Inch dimensions, compatible with inch diameter shafts.
Days to Ship: | 5 Days or more |
---|
IGUS DryLin R Plain Bushings - Straight, Split, Plastic (Inches).
MISUMI
DryLin® bushings are ideal for linear, rotary or oscillating applications. Its split bushing design is intended for extreme applications where constant maintenance is applied. The split design allows for quick and easy removal and installation without dismantling the linear assembly. Inch dimensions, compatible with inch diameter shafts.
Days to Ship: | 10 Days |
---|
IGUS DryLin R Liners - Plastics (Inches).
MISUMI
Maintenance-free DryLin® coatings offer excellent wear resistance and chemical resistance. Recommended where a low coefficient of friction is required. Ideal for linear, rotary or oscillating applications.
Days to Ship: | 5 Days or more |
---|
IGUS DryLin R Bushings - Flanged, long, plastic bushing (Inches).
MISUMI
DryLin® bushings incorporating a long aluminum housing with configurable flange (circular, square or compact) of standard length, with mounting holes, which can reduce assembly time as they are bolt-on. Inch dimensions, compatible with inch diameter shafts. Ideal for linear, rotary or oscillating applications.
Days to Ship: | 5 Days or more |
---|
IGUS DryLin R Bushings - With pilot flange housing, plastic bushing (Inches).
MISUMI
DryLin® bushings incorporate an aluminum housing with a selectable pilot flange shape (circular, square or compact) which is not completely on the end of the bushings, leaving sufficient clearance for mounting from the opposite side of the installation. Inch dimensions, compatible with inch diameter shafts. Ideal for linear, rotary or oscillating applications.
Days to Ship: | 5 Days or more |
---|
IGUS DryLin R Bushings - With pilot flange housing, long, plastic bushing (Inches).
MISUMI
DryLin® bushings incorporate a long aluminum housing with a selectable pilot flange shape (circular, square or compact) which is not completely on the end of the bushings, leaving sufficient clearance for mounting from the opposite side of the installation. Inch dimensions, compatible with inch diameter shafts. Ideal for linear, rotary or oscillating applications.
Days to Ship: | 5 Days or more |
---|
Oil Free Bushings - Center Flanged, Copper Alloy.
MISUMI
Spec-designed to have the flanges integrated into one in order to reduce the assembly time. Pilot: Prevents the oil free bushing from protruding toward the opposite side of its mounting side and allows for space saving. Center: Enables to mount a workpiec
Days to Ship: | Same day or more |
---|
Show Stock Products
Bushings 2000 Oiles - Straight, multilayer sintered, CLB series.
Oiles
Bushings with excellent wear resistance that can be used in rotary or linear operation. Steel bushing incorporating a layer of special sintered sliding material. The sintered layer is manufactured by dispersing and sintering a solid lubricant composed mainly of graphite in a special copper alloy, and then impregnating it with oil. Since the solid lubricant is dispersed, it can be used in any direction of movement and has excellent performance even in micro-movements. Can be used without lubrication. Excellent load resistance, speed characteristics and wear resistance.
Days to Ship: | 15 Days or more |
---|
3000 Oiles Bushings - Straight thin-walled, cast iron, 30B-T series.
Oiles
Thin-walled, straight, cast iron bushing, ideal for applications with limited installation space. Bushing made porous by actively utilizing the growth phenomenon of cast iron and impregnated with lubricating oil. Compared to copper alloy bushings, the frequency of lubrication can be significantly reduced. Excellent wear resistance with good oil film retention. Can be used with any type of shaft, for rotary, linear or combined rotary and linear motion applications.
Days to Ship: | Same day or more |
---|
Show Stock Products
Bushing 80 - Polyacetal, with shoulder, Series 80F.
Oiles
Polyacetal bushing, with shoulder, with excellent load capacity and wear resistance. Oil-free bushing, in which the lubricant is uniformly dispersed in the polyacetal resin. It has a low coefficient of friction and excellent speed characteristics and can be used without lubrication.
Days to Ship: | Same day or more |
---|
Show Stock Products
Glytron SE - Polyphenylene sulfide bushings, straight, GEB series.
Oiles
Glytron SE (GEB) bushings are electrically conductive and compatible with miniature bearings. They can be used completely without lubrication. Since there is no big difference between the static friction coefficient and dynamic friction coefficient, it has stable friction characteristics. Can be used in a wide range of temperatures, from low to high. Can be used with any type of rotating linear shaft. Provides conductivity at antistatic level.
Days to Ship: | Same day or more |
---|
Show Stock Products
Cermet M Bushings - Straight, sintered with solid lubricant, Series 54B.
Oiles
Small diameter sintered straight bushing, with excellent working characteristics at high speeds. Self-lubricating bushing with a solid lubricant composed mainly of Molybdenum Disulfide evenly dispersed in the sintered alloy structure. It can work without additional lubrication, but when used together with lubricating oil, even better performance is obtained. It exhibits excellent wear resistance in places where oil film composition is difficult, such as continuous back-and-forth operation, intermittent operation and oscillating motion.
Days to Ship: | Same day or more |
---|
Show Stock Products
Oil Free Bushings - With shoulder, iglidur® G.
igus
An oil-free shoulder bushing that can be used with shafts of any material, for linear or rotary applications. Operating temperature from -40°C to +130°C. Economical bushing suitable for a wide range of applications. Maintenance-free, no lubrication or greasing required. Excellent vibration damping properties. High abrasion and dust resistance. For medium and higher loads. For low to medium speeds. For rotary and oscillating movements.
Days to Ship: | 7 Days or more |
---|
Oil Free Bushings - Straight, iglidur® J.
igus
Straight oil-free bushing suitable for high-speed applications, where the risk of stick-slip effect is reduced. Non-lubricated and maintenance-free bushing. Operating temperature from -50°C to +90°C. Low coefficient of friction in non-lubricated operation. Excellent vibration damping properties. Good chemical resistance. Ideal for shaft materials with low hardness. Low moisture absorption rate. Suitable for low and medium loads.
Days to Ship: | 8 Days or more |
---|
Thermalloy Type D Bushings - Straight, made of metal, GB-C series.
Daido Metal
Straight copper bushing, oil-free, resistant to high temperatures up to 200°C). Resistant to foreign objects in the environment. Can work without additional lubrication, but when used together with lubricating oil, even better performance is obtained. Ideal for smooth movements and to avoid stick-slip effect. Good conductor of heat and electricity, so no heat build-up in the bushing.
Days to Ship: | 8 Days or more |
---|
BEAREE Bushings - Straight sleeve type, PTFE, ARE/AR series.
NTN
Smooth straight bushings made of high quality PTFE resin. With low coefficient of friction, wear resistance, anti-adhesion, heat resistance and chemical resistance. With little deformation due to compressive load.
Days to Ship: | Same day or more |
---|
Show Stock Products
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Type |
Metallic |
Bushing Material |
I.D. d(mm) |
I.D. d(inch) |
O.D. D(mm) |
O.D. D(inch) |
Overall Length L(mm) |
Overall Length L(inch) |
Maximum Allowable PV Value Range(N/mm2•m/s) |
Maximum Allowable PV Value(N/mm2•m/s) |
Max. Allowable Surface Pressure P(N/mm2) |
Max. Allowable Velocity V(m/s) |
Housing Style |
Housing Material |
Length Type |
Mounting Shaft Fits |
Mounting Hole Fits |
Thickness T(mm) |
Lubrication Condition |
Environment |
Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Oiles | Oiles | Oiles | Oiles | igus | igus | PBC Linear | PBC Linear | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Oiles | Oiles | Oiles | Oiles | Oiles | igus | igus | Daido Metal | NTN |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | PBC Simplicity® Linear Bushings - With shoulder, multilayer PBC (Inches). | PBC Simplicity® Linear Bushings - With pilot flange, long, plastic bushing (Inches). | IGUS Iglide J Plain Bushings - With shoulder, plastic (Inches). | IGUS DryLin R Bushings - Flanged housing, plastic bushing (Inches). | IGUS DryLin R Bushings - Center flange, plastic bushing (Inches). | Drymet LF Bushings - Flanged, multilayer (PTFE), LFG series. | Thrust Bushing 500SP1 - With shoulder, copper alloy, SPFG series. | Drymet LF Bushings - With shoulder, multilayer PTFE, LFF series. | Oil Free Bushings - Flange Type, made of metal, with mounting holes. | Oil-Free Bushings - Bearing type, wide block, multi-layer bushing. | Oil Free Bushings - Bearing type, compact high block, multilayer bushing. | Oil Free Bushings - Bearing type, high block, polyacetal bushing. | Oil Free Bushings - With pilot flanged housing, copper alloy. | Oil Free Bushings - With center flange housing. copper alloy. | Oil Free Bushings - Bearing type, high compact block, copper alloy. | Oil Free Bushings - Bearing type, compact wide block, copper alloy. | Oil Free Bushings - Bearing type, high standard block, copper alloy. | Oil Free Bushings - Bearing type, standard high block, multilayer bushing. | PBC Simplicity® Linear Bushings - Straight, Multilayer (Inches). | PBC Simplicity® Linear Bushings - With pilot flange, plastic bushing (Inches). | PBC Simplicity® Linear Bushings - With center flange, plastic bushing (Inches). | IGUS DryLin R Plain Bushings - Straight, Split, Plastic (Inches). | IGUS DryLin R Bushings - Flanged, long, plastic bushing (Inches). | IGUS DryLin R Bushings - With pilot flange housing, plastic bushing (Inches). | IGUS DryLin R Bushings - With pilot flange housing, long, plastic bushing (Inches). | Bushings 2000 Oiles - Straight, multilayer sintered, CLB series. | 3000 Oiles Bushings - Straight thin-walled, cast iron, 30B-T series. | Glytron SE - Polyphenylene sulfide bushings, straight, GEB series. | Cermet M Bushings - Straight, sintered with solid lubricant, Series 54B. | Thermalloy Type D Bushings - Straight, made of metal, GB-C series. | BEAREE Bushings - Straight sleeve type, PTFE, ARE/AR series. | ||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
Days to Ship | 5 Days or more | 5 Days or more | 5 Days or more | 5 Days or more | 5 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 21 Days | 21 Days |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 5 Days or more | 5 Days or more | 5 Days or more | 5 Days or more | 10 Days | 5 Days or more | 5 Days or more | 5 Days or more | 5 Days or more |
Same day or more
Show Stock Products | 15 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 7 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||
Type | Shouldered | Flanged | Straight | Flanged | Flanged | Flanged | Flanged | Shouldered | Straight | Shouldered | Shouldered | Shouldered | Straight | Open Type | Flanged | Pillow Block | Pillow Block | Pillow Block | Flanged | Flanged | Pillow Block | Pillow Block | Pillow Block | Straight | Pillow Block | Flanged | Straight | Flanged | Flanged | Straight | Straight | Straight | Flanged | Flanged | Flanged | Flanged | Straight | Straight | Shouldered | Straight | Straight | Shouldered | Straight | Straight | Straight |
Metallic | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Bushing Material | Frelon Gold® | Frelon Gold® | Iglide J® | DryLin® R | DryLin® R | Graphite Impregnated Brass | Sintered Bronze with PTFE | - | - | Sintered Bronze with PTFE | - | - | - | - | Cast Iron | Sintered Bronze with PTFE | Sintered Bronze with PTFE | Polyacetal | Graphite Impregnated Brass | Graphite Impregnated Brass | Graphite Impregnated Brass | Graphite Impregnated Brass | Graphite Impregnated Brass | Cast Iron | Sintered Bronze with PTFE | Polyacetal | Frelon Gold® | Frelon Gold® | Frelon Gold® | DryLin® R | DryLin® R | DryLin® R | DryLin® R | DryLin® R | DryLin® R | Graphite Impregnated Brass | - | Cast Iron | - | - | - | - | - | - | - |
I.D. d(mm) | - | - | - | - | - | 8 ~ 30 | 12 ~ 30 | 6 ~ 80 | 3 ~ 50 | 3 ~ 60 | 3 ~ 55 | 2 ~ 60 | 6 ~ 150 | 8 ~ 150 | 8 ~ 30 | 6 ~ 30 | 10 ~ 30 | 6 ~ 16 | 6 ~ 50 | 6 ~ 30 | 10 ~ 30 | 10 ~ 30 | 16 ~ 30 | 8 ~ 30 | 6 ~ 30 | 6 ~ 16 | - | - | - | - | - | - | - | - | - | 8 ~ 30 | 40 ~ 80 | 5 ~ 20 | 2 ~ 50 | 3 ~ 30 | 3 ~ 30 | 3 ~ 100 | 2 ~ 25 | 6 ~ 50 | 3 ~ 50 |
I.D. d(inch) | 0.38 in (3/8") ~ 1.00 in (1") | 0.25 in (1/4") ~ 1.00 in (1") | 0.13 in (1/8") ~ 1.50 in (1-1/2") | 0.38 in (3/8") ~ 1.00 in (1") | 0.38 in (3/8") ~ 1.00 in (1") | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.38 in (3/8") ~ 1.00 in (1") | 0.25 in (1/4") ~ 1.00 in (1") | 0.25 in (1/4") ~ 1.00 in (1") | 0.25 in (1/4") ~ 1.50 in (1-1/2") | 1.00 in (1") | 0.38 in (3/8") ~ 1.50 in (1-1/2") | 0.38 in (3/8") ~ 1.00 in (1") | 0.38 in (3/8") ~ 1.00 in (1") | 0.38 in (3/8") ~ 1.00 in (1") | - | - | - | - | - | - | - | - | - | - |
O.D. D(mm) | - | - | - | - | - | 12 ~ 38 | 21 ~ 45 | 10 ~ 96 | 6 ~ 60 | 4.6 ~ 65 | 4.5 ~ 60 | 4 ~ 65 | 12 ~ 210 | 15 ~ 210 | 15 ~ 45 | 8 ~ 34 | 12 ~ 34 | 8 ~ 18 | - | - | - | - | - | 12 ~ 38 | 8 ~ 34 | 8 ~ 18 | - | - | - | - | - | - | - | - | - | 12 ~ 38 | 50 ~ 96 | 7 ~ 24 | 4 ~ 55 | 6 ~ 35 | 6 ~ 40 | 4.5 ~ 105 | 3.5 ~ 28 | 10 ~ 62 | 6 ~ 60 |
O.D. D(inch) | 0.50 in (1/2") ~ 1.81 in (1-13/16") | 0.50 in (1/2") ~ 1.56 in (1-9/16") | 0.13 in (1/8") ~ 1.50 in (1-1/2") | 0.63 in (5/8") ~ 1.56 in (1-9/16") | 0.63 in (5/8") ~ 1.56 in (1-9/16") | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.50 in (1/2") ~ 1.81 in (1-13/16") | 0.50 in (1/2") ~ 1.56 in (1-9/16") | 0.50 in (1/2") ~ 1.56 in (1-9/16") | 0.50 in (1/2") ~ 2.38 in (2-3/8") | 1.56 in (1-9/16") | 0.38 in (3/8") ~ 1.50 in (1-1/2") | 0.63 in (5/8") ~ 1.56 in (1-9/16") | 0.63 in (5/8") ~ 1.56 in (1-9/16") | 0.63 in (5/8") ~ 1.56 in (1-9/16") | - | - | - | - | - | - | - | - | - | - |
Overall Length L(mm) | - | - | - | - | - | 20 ~ 70 | 30 ~ 64 | 11 ~ 90 | 3 ~ 50 | 3 ~ 60 | 3 ~ 50 | 3 ~ 40 | 17 ~ 240 | 17 ~ 240 | 20 ~ 70 | 27 ~ 74 | 39 ~ 74 | 27 ~ 47 | 22 ~ 188 | 37 ~ 128 | 37 ~ 128 | 32 ~ 128 | 42 ~ 128 | 15 ~ 100 | 27 ~ 128 | 19 ~ 37 | - | - | - | - | - | - | - | - | - | 20 ~ 70 | 40 ~ 100 | 5 ~ 30 | 2 ~ 50 | 5 ~ 30 | 3 ~ 40 | 2 ~ 50 | 2.5 ~ 30 | 6 ~ 50 | 5 ~ 50 |
Overall Length L(inch) | 0.38 in (3/8") ~ 1.00 in (1") | 1.25 in (1-1/4") ~ 4.13 in (4-1/8") | 0.25 in (1/4") ~ 1.50 in (1-1/2") | 0.88 in (7/8") ~ 2.25 in (2-1/4") | 1.78 in (1-25/32") ~ 4.50 in (4-1/2") | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.38 in (3/8") ~ 1.50 in (1-1/2") | 0.75 in (3/4") ~ 2.25 in (2-1/4") | 1.25 in (1-1/4") ~ 4.13 in (4-1/8") | 0.75 in (3/4") ~ 3.00 in (3") | 2.25 in (2-1/4") | 0.84 in (27/32") ~ 2.95 in (2-61/64") | 1.78 in (1-25/32") ~ 4.50 in (4-1/2") | 0.88 in (7/8") ~ 2.25 in (2-1/4") | 1.78 in (1-25/32") ~ 4.50 in (4-1/2") | - | - | - | - | - | - | - | - | - | - |
Maximum Allowable PV Value Range(N/mm2•m/s) | - | - | - | - | - | 1.1 to 2.0 | 2.1 to 5.0 | 1.1 to 2.0 | 0.3 to 1.0 | 2.1 to 5.0 | 0.3 to 1.0 | 1.1 to 2.0 | - | - | 0.3 to 1.0 | 2.1 to 5.0 | 2.1 to 5.0 | 2.1 to 5.0 | 1.1 to 2.0 | 1.1 to 2.0 | 1.1 to 2.0 | 1.1 to 2.0 | 1.1 to 2.0 | 0.3 to 1.0 | 2.1 to 5.0 | 2.1 to 5.0 | - | - | - | - | - | - | - | - | - | 1.1 to 2.0 | 1.1 to 2.0 | 1.1 to 2.0 | 2.1 to 5.0 | 0.3 to 1.0 | 1.1 to 2.0 | 0.3 to 1.0 | 0.3 to 1.0 | - | 0.3 to 1.0 |
Maximum Allowable PV Value(N/mm2•m/s) | 20000 | 20000 | - | - | - | 1.65 | 3.6 | 1.65 | 1 | 3.6 | 0.34 | 1.32 | 0.36 | 0.36 | 0.5 | 3.6 | 3.6 | 2.45 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 0.5 | 3.6 | 2.45 | - | 20000 | 20000 | - | - | - | - | - | - | 1.65 | 1.63 | 1.25 | 2.45 | 0.65 | 1.65 | 0.42 | 0.34 | - | 1 |
Max. Allowable Surface Pressure P(N/mm2) | 3000 | 3000 | - | - | - | 29 | 49 | 29 | 7 | 49 | 35 | 150 | 10.35 | 10.35 | 5 | 49 | 49 | 17.5 | 29 | 29 | 29 | 29 | 29 | 5 | 49 | 17.5 | - | 3000 | 3000 | - | - | - | - | - | - | 29 | 24.5 | 10 | 17.5 | 14.5 | 10 | 80 | 35 | - | - |
Max. Allowable Velocity V(m/s) | 300 | 300 | - | 1969 | 1969 | 0.5 | 0.65 | 0.5 | 1.65 | 0.65 | 1.5 | 1.5 | 0.71 | 0.71 | 0.15 | 0.65 | 0.65 | 0.85 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.15 | 0.65 | 0.85 | - | 300 | 300 | 1969 | 1969 | 1969 | 1969 | 1969 | 1969 | 0.5 | 0.5 | 1 | 0.85 | 2.5 | 0.85 | 1 | 1.5 | - | - |
Housing Style | - | Round Flanged / Square Flanged / Oval Shape Flanged | - | Round Flanged / Square Flanged / Oval Shape Flanged | Round Flanged / Square Flanged / Oval Shape Flanged / Center Flanged | - | Square Flanged | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Round Flanged / Square Flanged / Oval Shape Flanged | Round Flanged / Square Flanged / Oval Shape Flanged | - | - | - | Round Flanged / Square Flanged / Oval Shape Flanged | Round Flanged / Square Flanged / Oval Shape Flanged / Pilot Flanged | Round Flanged / Square Flanged / Oval Shape Flanged / Pilot Flanged | - | - | - | - | - | - | - | - | - | - |
Housing Material | - | Aluminum | - | Aluminum | Aluminum | - | Aluminum | - | - | - | - | - | - | - | - | Aluminum | Aluminum | Aluminum | Steel | Steel | Aluminum | Aluminum | Aluminum | Steel | Aluminum | Aluminum | - | Aluminum | Aluminum | - | - | - | Aluminum | Aluminum | Aluminum | - | - | - | - | - | - | - | - | - | - |
Length Type | Single | Double | Single | Single | Double | - | Single | Single | Single | Single | - | - | - | - | - | Single | Single | Single | Single / Double / Long | Double | Single / Double | Single / Double | Single / Double | Single / Double | Single / Double | Single | Single | Single | Double | Single | Single | Double | Double | Single | Double | - | Single | Single | Single | Single | Single | - | - | - | Single |
Mounting Shaft Fits | - | - | - | - | - | - | e7 | e7 | h6 | - | h9 | h9 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | g6 | h7 | h7 | g6 | h7 | h9 | h9 | - | h6 |
Mounting Hole Fits | - | - | - | - | - | - | H7 | H7 | H7 | H7 | H7 | H7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | H6 | H7 | H7 | H7 | H7 | H7 | H7 | - | M7 |
Thickness T(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Lubrication Condition | - | - | - | - | - | - | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Unlubricated | Regular Lubrication | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated |
Environment | - | - | - | - | - | - | Standard / In Oil / In Water | Standard / Heat Resistant / Foreign Object Resistant | Standard / Heat Resistant / In Water / In Seawater / In Chemical | Standard / In Oil | Standard / Foreign Object Resistant / Vibration Resistant / In Oil / In Water / In Seawater | Standard / Heat Resistant / Foreign Object Resistant / Vibration Resistant / In Oil / In Water / In Seawater / In Chemical | Food | Food | - | - | - | Food | - | - | - | - | - | - | - | Food | - | - | - | - | - | - | - | - | - | - | Standard / Vibration Resistant | Standard | Standard | Standard / In Water / In Seawater / In Chemical | Standard | Standard / Foreign Object Resistant / Vibration Resistant / In Oil | Standard / Foreign Object Resistant / Vibration Resistant / In Oil / In Water / In Seawater | Foreign Object Resistant / In Water | Standard / Heat Resistant / In Oil / In Water / In Seawater / In Chemical |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy