(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Plain & Self-Lubricating Bearings
Since bearings usually receive a lot of frictional resistance that generates heat, lubricants such as oil or grease are used to prevent the seizing or abnormal wear that this frictional heat could otherwise cause. Lubrication-free bushings don't need lubricating oil because the bearing body has a lubricating structure made possible by lubricating oil in the bearing body, or by embedded solid lubricant or the like. Since they don't need lubricating oil, lubrication-free bushings are often used for applications such as precision machinery that makes lubricating oil refilling difficult, and equipment with poor affinity to oil. They also greatly reduce maintenance costs by eliminating the need for regular lubrication and enabling stable operation over long periods. Lubrication-free bushings come in a variety of shapes that can be used for different applications as needed. Examples include straight bushings, collar bushings, flange bushings and housing bushings.
-
Bushing 500SP1 - Straight, copper alloy, SPB series.
Oiles
Straight oil-free bushing made of copper, with solid lubricant incorporated (graphite). Excellent wear resistance in areas where it is difficult to form an oil film, such as reciprocating movements, oscillating movements and frequent starts and stops. Excellent chemical and corrosion resistance but not recommended for use with sea water.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Daidyne DDK05 Bushings - Straight, metal polymer, K5B series.
Daido Metal
This product is an environmentally friendly Lead free bearing.This compound bearing, a "perfect oil-less bearing" that does not require any lubricant at all uses polytetrafluoroethylene (PTFE) resin, has excellent low friction characteristics and also optimizes metal properties such as strength and dimensional stability.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - Straight, multilayer (PTFE).
MISUMI
Has a Thin wall and is compact.
- Volume Discount
- New Pricing
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Drymet LF Bushings - Straight, multilayer PTFE, LFB series.
Oiles
Drymet LF (LFF) straight bushing that can be used over a wide temperature range and has excellent chemical resistance. It is an oil-free bushing composed of three layers: Ethylene Tetrafluoride resin layer with filler, Sintered Copper layer and supporting metal. It can be used without lubrication and is very compact due to its thinness and light weight. It has a low coefficient of friction, stable under high load and low speed conditions, and has excellent wear resistance. When used in conjunction with lubricating oil, it can be used with a high PV value even in the medium and high speed range. It can be used over a wide range of temperatures, from low to high, and has excellent chemical resistance. Excellent dimensional stability, mechanical strength and thermal conductivity.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - With shoulder, Bronze.
MISUMI
Shouldered, less likely to pull-out.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - Straight, copper alloy, I.D. F7 tolerance.
MISUMI
The most standard type in the Copper Alloy series.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - Straight, Bronze, O.D. tolerance m6.
MISUMI
Is capable of minute sliding motion and excels in baking resistance. Alterations on Overall Length are available.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Bushing 500SP1 - With shoulder, copper alloy, SPF series.
Oiles
Oil-free bushing with shoulder made of Copper, with incorporated solid lubricant (Graphite). With high performance in heavy loads and at low speeds. Excellent wear resistance in areas where it is difficult to form an oil film, such as reciprocating movements, oscillating movements and frequent starts and stops. Excellent chemical and corrosion resistance.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - With shoulder, multilayer (PTFE).
MISUMI
Has a Thin wall and is compact.
- Volume Discount
- New Pricing
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Daibest DBB01 Bushing - Straight, metal polymer, DBB series.
Daido Metal
Impregnated with our Daido's proprietary lubricant, these bearings are composed of lipophilic fibers and special filler material uniformly dispersed within polyacetal plastic resin, a plastic material offering excellent bearing characteristics.Type with steel backing DBB01 dry bearing
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - Straight, Copper Alloy, tolerance I.D. G6, O.D. m6.
MISUMI
The recommended shaft tolerance for this bushing is g6, to obtain a very small clearance between the bushing and the shaft, achieving a more precise linear and rotational movement than with other settings. These bushings are designed with an embedded solid lubricant (Graphite). Recommended for low speed and high load applications.
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Drymet ST Bushings - Polyacetal, multilayer, 70B series.
Oiles
Drymet ST (70B) straight bushings with compact design. It can be used without lubrication, has a low coefficient of friction and excellent load resistance. It has excellent wear resistance even in areas where oil film composition is difficult, such as constant back and forth movements, oscillating movements and frequent starts and stops. Since the bearing is thin, a compact design is possible. Excellent dimensional stability, mechanical strength and thermal conductivity.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - Thrust type, copper alloy.
MISUMI
Embedded lubricant at flange allows to bear radial journal load and thrust load at the same time.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - With pilot flanged housing, copper alloy.
MISUMI
Suitable for vertical use. Reduces the time of manufacturing and assembling the housing. Since Oil Free Bushings do not project from bushing mounting position, space can be saved on opposite of mounting side.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Toughmet bushings - Straight, multilayer, TMB series.
Oiles
High temperature and high load bearing with excellent resistance to foreign matter. Composed of two layers: a copper-based sintered alloy layer with a special solid lubricant dispersed evenly and thinly, and a backing metal. Excellent load and heat resistance. Excellent performance even in reciprocating/oscillating/intermittent operation. When used in conjunction with lubricating oil, the oil retention property of the sintered copper-based alloy layer and the action of the solid lubricant provide even better performance. Because the bearing is thin, a compact design is possible.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - With shoulder, copper alloy, I.D. E7 tolerance.
MISUMI
Shouldered to prevent itself from being removed from the plate.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - Flanged, copper alloy.
MISUMI
Suitable for vertical use. Reduces the time of manufacturing and assembling the housing.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - Flanged, copper alloy, tolerances I.D. F7 and I.D. G6.
MISUMI
Assembly process can be reduced by the flange-integrated specification.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - Polyacetal, straight.
MISUMI
Spec-designed to comply with Food Sanitary Act
- Volume Discount
- New Pricing
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Drymet LF Bushings - With shoulder, multilayer PTFE, LFF series.
Oiles
Drymet LF (LFF) shoulder bushing that can be used over a wide temperature range and has excellent chemical resistance. It is an oil-free bushing composed of three layers: Ethylene Tetrafluoride resin layer with filler, Sintered Copper layer and supporting metal. It can be used without lubrication and is very compact due to its thinness and light weight. It has a low coefficient of friction, stable under high load and low speed conditions, and has excellent wear resistance. When used in conjunction with lubricating oil, it can be used with a high PV value even in the medium and high speed range. It can be used over a wide range of temperatures, from low to high, and has excellent chemical resistance. Excellent dimensional stability, mechanical strength and thermal conductivity.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Daislide Bushings - Straight, made of metal, HA series.
Daido Metal
Self-lubricating straight bushings manufactured with solid lubricant embedded in a copper alloy. No maintenance or lubrication required. Excellent wear resistance. Ideal for constant back and forth motion, intermittent motion and oscillating motion under high load and low speed conditions. Demonstrates excellent wear resistance properties in areas where oil film form is difficult. Has low coefficient of friction and can be used over a wide temperature range. Excellent corrosion resistance, impact resistance and chemical resistance. Can be used where lubrication is difficult, such as in liquids or generated gases.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
IGUS DryLin R Plain Bushings - Straight, self-aligning, plastic (Inches).
MISUMI
DryLin® bushings are ideal for linear, rotary or oscillating applications. Their design allows them to self-align in different situations. They are ideal for compensating for parallelism error in two-axis systems. Inch dimensions, compatible with inch diameter shafts.
- Volume Discount
- INCH
Days to Ship: 5 Days or more -
IGUS Iglide J Plain Bushings - Straight, plastic (Inches).
MISUMI
iglide® J straight bushings are manufactured with high-performance polymers and lubricants that provide excellent mechanical properties and make them maintenance-free. Ideal where low coefficient of friction and high wear resistance are required. Inch dimensions, compatible with inch bores and shafts.
- Volume Discount
- INCH
Days to Ship: 5 Days or more -
Bushing 80 - Polyacetal, straight, series 80B.
Oiles
The straight polyacetal bushing is one of the most versatile series to be used in different applications. They have excellent load capacity and wear resistance. Oil-free bushing, in which the lubricant is evenly dispersed in the polyacetal resin. It has a low coefficient of friction and excellent speed characteristics, and can be used without lubrication.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Simplicity® Oil-Free Bushings - Closed (Inches).
PBC Linear
PBC Linear has combined Frelon material with precision bearing technology to create Simplicity® linear plain bearings. Simplicity self lubricating plain bearings can move in linear, oscillating, rotary, or any combination of motions at speeds exceeding 4 m/s (165 in/s)
Days to Ship: 11 Days -
Oil Free Bushings - Flange type, bronze alloy, with mounting holes.
MISUMI
Assembly process can be reduced by the flange-integrated specification.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - Straight, copper alloy, I.D. E7 tolerance.
MISUMI
Is spec-designed to save the time of screwing and prevent rotation only through the press fitting operation.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
PBC Simplicity® Linear Bushings - Flanged, plastic bushing (Inches).
MISUMI
Frelon Gold® bushings incorporating a configurable flanged aluminum housing (circular, square or compact) of standard length, with mounting holes, which can reduce assembly time as they are bolt-on. Inch dimensions, compatible with inch diameter shafts.
- Volume Discount
- INCH
Days to Ship: 5 Days or more -
Oil Free Bushings - With pilot flange, Copper Alloy.
MISUMI
Spec-designed to have the flanges integrated into one in order to reduce the assembly time. Pilot: Prevents the oil free bushing from protruding toward the opposite side of its mounting side and allows for space saving. Center: Enables to mount a workpiec
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - Polyacetal, with shoulder.
MISUMI
Spec-designed to comply with Food Sanitary Act
- Volume Discount
- New Pricing
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - Straight, iglidur® J.
igus
Straight oil-free bushing suitable for high-speed applications, where the risk of stick-slip effect is reduced. Non-lubricated and maintenance-free bushing. Operating temperature from -50°C to +90°C. Low coefficient of friction in non-lubricated operation. Excellent vibration damping properties. Good chemical resistance. Ideal for shaft materials with low hardness. Low moisture absorption rate. Suitable for low and medium loads.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Daibest DBX01 Bushing - Straight, DBX series.
Daido Metal
This bearing is filled with lubricant before installation, to which a small amount of lubricant is added at predetermined intervals to allow it to withstand long-term operation. The structure of this prelubricated bearing consists of spherical powdered bronze sintered onto a steel backing and polyacetal resin impregnated into the surface.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Daidyne DDK05 Bushings - With shoulder, metal polymer, K5F series.
Daido Metal
This product is an environmentally friendly Lead free bearing. This compound bearing, a "perfect oil-less bearing" that does not require any lubricant at all uses polytetrafluoroethylene (PTFE) resin, has excellent low friction characteristics and also optimizes metal properties such as strength and dimensional stability.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
BEARPHITE bushings - Sintered, oil impregnated.
NTN
Bushings manufactured with powder metallurgical technology. It is defined as a bushing in which oil is impregnated into a sintered porous body whose main component is metal powder. Excellent bushing performance in a wide range of applications. The service life of the bearings is long due to the stable lubrication function, and their performance is excellent at both low and high temperatures. Their quality, such as accuracy, density and oil content, is maintained by unique manufacturing technology and quality control. Ideal for recreational machines, power generation equipment, molding machines, industrial robots, etc.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - Straight, multilayer (Flouroresin).
MISUMI
Narrow clearance between the bushing and g6 shaft allows for highly precise linear/rotary motion.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
PBC Simplicity® Linear Bushings - Straight, Multilayer (Inches).
MISUMI
Aluminum straight bushings, Frelon Gold®, recommended to work with bearing steels such as 52100. Inch dimensions, compatible with inch diameter shafts.
- Volume Discount
- INCH
Days to Ship: 5 Days or more -
PBC Simplicity® Linear Bushings - With pilot flange, plastic bushing (Inches).
MISUMI
Frelon Gold® bushings incorporate an aluminum housing with a pilot flange of selectable shape (circular, square or compact) which is not completely on the end of the bushings, leaving sufficient space for mounting from the opposite side of the installation. Dimensions in inches, compatible with inch diameter axles.
- Volume Discount
- INCH
Days to Ship: 5 Days or more -
IGUS Iglide J Plain Bushings - With shoulder, plastic (Inches).
MISUMI
iglide® J shoulder bushings are manufactured with high-performance polymers and lubricants that provide excellent mechanical properties and make them maintenance-free. Ideal where low coefficient of friction and high wear resistance are required. Inch dimensions, compatible with inch bores and shafts.
- Volume Discount
- INCH
Days to Ship: 5 Days or more -
IGUS DryLin R Bushings - Center flange, plastic bushing (Inches).
MISUMI
DryLin® bushings incorporate a configurable center flange housing (circular, square or compact) that allows a load to be placed near the center of the bushings to evenly distribute the load and space. Inch dimensions, compatible with inch diameter shafts. Ideal for linear, rotary or oscillating applications.
- Volume Discount
- INCH
Days to Ship: 5 Days or more -
Oil Free Bushings - PTFE, straight.
MISUMI
Spec-designed to comply with Food Sanitary Act and to be excellent in chemical resistance.
- Volume Discount
- inCAD Components
Days to Ship: Same day Show Stock Products
-
3000 Oiles Bushings - Straight, cast iron, series 30B.【1-10 Pieces Per Package】
Oiles
Cast iron bushing, straight, ideal for reducing lubrication frequency. Bushing made porous by actively utilizing the growth phenomenon of cast iron and impregnated with lubricating oil. Compared with copper alloy bushings, the lubrication frequency can be greatly reduced. Excellent wear resistance with good oil film retention. Can be used with any type of shaft, for rotary, linear or combined rotary and linear motion applications.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Bushing 80 - Polyacetal, with shoulder, Series 80F.
Oiles
Polyacetal bushing, with shoulder, with excellent load capacity and wear resistance. Oil-free bushing, in which the lubricant is uniformly dispersed in the polyacetal resin. It has a low coefficient of friction and excellent speed characteristics and can be used without lubrication.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - Flange Type, made of metal, with mounting holes.
MISUMI
Assembly process can be reduced by the flange-integrated specification.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - Miniature, flanged housing, copper alloy.
MISUMI
5 ~ 8 mm smaller in flange diameter (H dimension) compared to conventional Flanged Oil Free Bushings. Suited for use in limited space.
- Volume Discount
- METRIC
Days to Ship: 8 Days or more -
Oil-Free Bushings - Flanged housing, multilayer bushing.
MISUMI
Suitable for vertical use. Reduces the time of manufacturing and assembling the housing.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Type |
| Metallic |
| Bushing Material |
| I.D. d(mm) |
| I.D. d(inch) |
| O.D. D(mm) |
| O.D. D(inch) |
| Overall Length L(mm) |
| Overall Length L(inch) |
| Maximum Allowable PV Value Range(N/mm2•m/s) |
| Maximum Allowable PV Value(N/mm2•m/s) |
| Max. Allowable Surface Pressure P(N/mm2) |
| Max. Allowable Velocity V(m/s) |
| Housing Style |
| Housing Material |
| Length Type |
| Mounting Shaft Fits |
| Mounting Hole Fits |
| Thickness T(mm) |
| Lubrication Condition |
| Environment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | Oiles | Daido Metal | MISUMI | Oiles | MISUMI | MISUMI | MISUMI | Oiles | MISUMI | Daido Metal | MISUMI | Oiles | MISUMI | MISUMI | Oiles | MISUMI | MISUMI | MISUMI | MISUMI | Oiles | Daido Metal | MISUMI | MISUMI | Oiles | PBC Linear | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | igus | Daido Metal | Daido Metal | NTN | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Oiles | Oiles | MISUMI | MISUMI | MISUMI |
| Product Series | Daidyne DDK05 Bushings - Straight, metal polymer, K5B series. | Oil Free Bushings - Straight, copper alloy, I.D. F7 tolerance. | Daibest DBB01 Bushing - Straight, metal polymer, DBB series. | Oil Free Bushings - Straight, Copper Alloy, tolerance I.D. G6, O.D. m6. | Oil Free Bushings - With pilot flanged housing, copper alloy. | Oil Free Bushings - With shoulder, copper alloy, I.D. E7 tolerance. | Oil Free Bushings - Flanged, copper alloy, tolerances I.D. F7 and I.D. G6. | Drymet LF Bushings - With shoulder, multilayer PTFE, LFF series. | IGUS DryLin R Plain Bushings - Straight, self-aligning, plastic (Inches). | Oil Free Bushings - Flange type, bronze alloy, with mounting holes. | Oil Free Bushings - Straight, copper alloy, I.D. E7 tolerance. | PBC Simplicity® Linear Bushings - Flanged, plastic bushing (Inches). | Daidyne DDK05 Bushings - With shoulder, metal polymer, K5F series. | PBC Simplicity® Linear Bushings - Straight, Multilayer (Inches). | PBC Simplicity® Linear Bushings - With pilot flange, plastic bushing (Inches). | IGUS Iglide J Plain Bushings - With shoulder, plastic (Inches). | IGUS DryLin R Bushings - Center flange, plastic bushing (Inches). | 3000 Oiles Bushings - Straight, cast iron, series 30B.【1-10 Pieces Per Package】 | Oil Free Bushings - Flange Type, made of metal, with mounting holes. | Oil Free Bushings - Miniature, flanged housing, copper alloy. | |||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Days to Ship |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 5 Days or more | 5 Days or more |
Same day or more
Show Stock Products | 11 Days |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 5 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 5 Days or more | 5 Days or more | 5 Days or more | 5 Days or more |
Same day
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||
| Type | Straight | Straight | Straight | Straight | Shouldered | Straight | Straight | Shouldered | Shouldered | Straight | Straight | Straight | Shouldered / Flanged | Flanged | Straight | Shouldered | Flanged | Flanged | Straight | Shouldered | Straight | Straight | Straight | Straight | Straight | Flanged | Straight | Flanged | Flanged | Shouldered | Straight | Straight | Shouldered | Straight / Flanged | Straight | Straight | Flanged | Straight | Flanged | Straight | Straight | Shouldered | Flanged | Flanged | Flanged |
| Metallic | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Brass | - |
| Bushing Material | - | Sintered Bronze with PTFE | Sintered Bronze with PTFE | Sintered Bronze with PTFE | Bronze | Graphite Impregnated Brass | Bronze | - | Sintered Bronze with PTFE | Polyacetal | Graphite Impregnated Brass | - | Graphite Impregnated Brass | Graphite Impregnated Brass | Graphite Impregnated Brass / Sintered Bronze with PTFE | Graphite Impregnated Brass | Graphite Impregnated Brass | Graphite Impregnated Brass | Polyacetal | Sintered Bronze with PTFE | - | DryLin® R | Iglide J® | - | - | Bronze | Graphite Impregnated Brass | Frelon Gold® | Graphite Impregnated Brass | Polyacetal | - | Polyacetal | Sintered Bronze with PTFE | - | Fluororesin | Frelon Gold® | Frelon Gold® | Iglide J® | DryLin® R | PTFE | Cast Iron | - | Cast Iron | Graphite Impregnated Brass | Sintered Bronze with PTFE |
| I.D. d(mm) | 6 ～ 170 | 3 ～ 160 | 3 ～ 50 | 3 ～ 160 | 5 ～ 30 | 5 ～ 100 | 5 ～ 30 | 6 ～ 120 | 3 ～ 50 | 5 ～ 100 | 5 ～ 30 | 5 ～ 160 | 6 ～ 50 | 6 ～ 50 | 5 ～ 100 | 5 ～ 50 | 6 ～ 50 | 6 ～ 50 | 3 ～ 50 | 3 ～ 60 | 6 ～ 160 | - | - | 2 ～ 50 | - | 6 ～ 30 | 5 ～ 30 | - | 8 ～ 30 | 3 ～ 50 | 2 ～ 25 | 10 ～ 85 | 3 ～ 60 | 3 ～ 25 | 4 ～ 16 | - | - | - | - | 3 ～ 20 | 5 ～ 100 | 2 ～ 50 | 8 ～ 30 | 6 ～ 30 | 6 ～ 30 |
| I.D. d(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.25 in (1/4") ～ 1.50 in (1-1/2") | 0.13 in (1/8") ～ 1.50 in (1-1/2") | - | 0.19 in (3/16") ～ 4.00 in (4") | - | - | 0.25 in (1/4") ～ 1.00 in (1") | - | - | - | - | - | - | - | 0.38 in (3/8") ～ 1.00 in (1") | 0.25 in (1/4") ～ 1.00 in (1") | 0.13 in (1/8") ～ 1.50 in (1-1/2") | 0.38 in (3/8") ～ 1.00 in (1") | - | - | - | - | - | - |
| O.D. D(mm) | 10 ～ 190 | 5 ～ 165 | 5 ～ 55 | 5 ～ 165 | 9 ～ 40 | 7 ～ 120 | 9 ～ 38 | 10 ～ 140 | 5 ～ 55 | 7 ～ 105 | 7 ～ 38 | 7 ～ 165 | 10 ～ 62 | - | 7 ～ 105 | 7 ～ 60 | 23 | 10 ～ 62 | 5 ～ 55 | 4.6 ～ 65 | 10 ～ 180 | - | - | 4 ～ 55 | - | 10 ～ 38 | 7 ～ 38 | - | 12 ～ 38 | 5 ～ 55 | 3.5 ～ 28 | 13 ～ 90 | 4.6 ～ 65 | 5 ～ 30 | 7 ～ 19 | - | - | - | - | 6 ～ 26 | 8 ～ 125 | 4 ～ 55 | 15 ～ 45 | 12 ～ 45 | 12 ～ 45 |
| O.D. D(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.50 in (1/2") ～ 2.38 in (2-3/8") | 0.25 in (1/4") ～ 1.75 in (1-3/4") | - | 0.38 in (3/8") ～ 6.00 in (6") | - | - | 0.50 in (1/2") ～ 1.56 in (1-9/16") | - | - | - | - | - | - | - | 0.50 in (1/2") ～ 1.81 in (1-13/16") | 0.50 in (1/2") ～ 1.56 in (1-9/16") | 0.13 in (1/8") ～ 1.50 in (1-1/2") | 0.63 in (5/8") ～ 1.56 in (1-9/16") | - | - | - | - | - | - |
| Overall Length L(mm) | 8 ～ 150 | 3 ～ 100 | 3 ～ 60 | 3 ～ 100 | 10 ～ 50 | 8 ～ 100 | 8 ～ 60 | 10 ～ 100 | 3 ～ 40 | 4 ～ 90 | 8 ～ 40 | 4 ～ 125 | 10 ～ 60 | 22 ～ 188 | 5 ～ 95 | 10 ～ 60 | 22 ～ 188 | 15 ～ 100 | 3 ～ 50 | 3 ～ 60 | 8 ～ 150 | - | - | 2 ～ 50 | - | 15 ～ 70 | 8 ～ 50 | - | 20 ～ 70 | 3 ～ 50 | 2.5 ～ 30 | 10 ～ 80 | 3 ～ 60 | 2 ～ 25 | 5 ～ 25 | - | - | - | - | 3 ～ 30 | 5 ～ 80 | 2 ～ 50 | 20 ～ 70 | 22 ～ 68 | 19 ～ 115 |
| Overall Length L(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.75 in (3/4") ～ 3.00 in (3") | 0.25 in (1/4") ～ 1.50 in (1-1/2") | - | 0.56 in (9/16") ～ 8.00 in (8") | - | - | 0.75 in (3/4") ～ 2.25 in (2-1/4") | - | - | - | - | - | - | - | 0.38 in (3/8") ～ 1.50 in (1-1/2") | 0.75 in (3/4") ～ 2.25 in (2-1/4") | 0.25 in (1/4") ～ 1.50 in (1-1/2") | 1.78 in (1-25/32") ～ 4.50 in (4-1/2") | - | - | - | - | - | - |
| Maximum Allowable PV Value Range(N/mm2•m/s) | 1.1 to 2.0 | 2.1 to 5.0 | 2.1 to 5.0 | 2.1 to 5.0 | 1.1 to 2.0 | 1.1 to 2.0 | 1.1 to 2.0 | 1.1 to 2.0 | 2.1 to 5.0 | 2.1 to 5.0 | 1.1 to 2.0 | 2.1 to 5.0 | 1.1 to 2.0 | 1.1 to 2.0 | 1.1 to 2.0 | 1.1 to 2.0 | 1.1 to 2.0 | 1.1 to 2.0 | 2.1 to 5.0 | 2.1 to 5.0 | 1.1 to 2.0 | - | - | 2.1 to 5.0 | - | 1.1 to 2.0 | 1.1 to 2.0 | - | 1.1 to 2.0 | 2.1 to 5.0 | 0.3 to 1.0 | 2.1 to 5.0 | 1.1 to 2.0 | 1.1 to 2.0 | 0.3 to 1.0 | - | - | - | - | 0.3 to 1.0 | 1.1 to 2.0 | 2.1 to 5.0 | 0.3 to 1.0 | - | 2.1 to 5.0 |
| Maximum Allowable PV Value(N/mm2•m/s) | 1.65 | 3.6 | 3.6 | 3.6 | 1.65 | 1.65 | 1.65 | 1.65 | 3.6 | 3.25 | 1.65 | 3.25 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 1.65 | 2.45 | 3.6 | 1.65 | - | - | 2.45 | 0.72 | 1.65 | 1.65 | 20000 | 1.65 | 2.45 | 0.34 | - | 1.72 | 0.83 | 0.98 | - | 20000 | - | - | 1 | 1.25 | 2.45 | 0.5 | 1.65～3.25 | 3.6 |
| Max. Allowable Surface Pressure P(N/mm2) | 29 | 49 | 49 | 49 | 10 | 29 | 10 | 29 | 49 | 24.5 | 29 | 24.5 | 29 | 29 | 24.5 | 29 | 29 | 29 | 17.5 | 49 | 29 | - | - | 17.5 | 20.7 | 10 | 29 | 3000 | 29 | 17.5 | 35 | - | 137 | 7 | 6 | - | 3000 | - | - | 7 | 10 | 17.5 | 5 | 29 | 49 |
| Max. Allowable Velocity V(m/s) | 0.5 | 0.65 | 0.65 | 0.65 | 1.66 | 0.5 | 1.66 | 0.5 | 0.65 | 1.15 | 0.5 | 1.15 | 0.5 | 0.5 | 0.4 | 0.5 | 0.5 | 0.5 | 0.85 | 0.65 | 0.5 | 1969 | - | 0.85 | 1.5 | 1.66 | 0.5 | 300 | 0.5 | 0.85 | 1.5 | - | 1 | 1.83 | 3.33 | - | 300 | - | 1969 | 1.65 | 1 | 0.85 | 0.15 | 0.5～1.0 | 0.65 |
| Housing Style | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Round Flanged / Square Flanged / Oval Shape Flanged | - | - | - | - | - | - | - | - | Round Flanged / Square Flanged / Oval Shape Flanged | - | Round Flanged / Square Flanged / Oval Shape Flanged / Center Flanged | - | - | - | - | Round Flanged | - |
| Housing Material | - | - | - | - | - | - | - | - | - | - | - | - | - | Steel | - | - | Steel | - | - | - | - | - | - | - | - | - | - | Aluminum | - | - | - | - | - | - | - | - | Aluminum | - | Aluminum | - | - | - | - | Steel | Aluminum |
| Length Type | Single | - | - | Single | - | - | - | Single | - | - | - | Single | - | Single / Double / Long | Single | - | Single / Double / Long | - | - | Single | - | Single | Single | Single | - | - | - | Single | - | - | - | - | - | Single | - | Single | Single | Single | Double | - | Single | Single | - | Single | Single / Double |
| Mounting Shaft Fits | e7 | - | - | - | - | - | - | e7 | - | - | - | h7 | - | - | h7 | - | - | - | - | - | - | - | - | h7 | - | - | - | - | - | - | h9 | - | - | - | - | - | - | - | - | - | h7 | h7 | - | - | - |
| Mounting Hole Fits | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | G7 | H7 | H7 | - | H7 | H7 | - | - | H7 | H7 | H7 | - | - | H7 | - | - | H7 | - | - | H7 | H7 | H7 | H7 | - | - | - | - | - | - | H7 | H7 | H7 | - | - | - |
| Thickness T(mm) | - | 1 ～ 2.5 | - | - | - | - | - | - | - | 1 ～ 2.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.5 ～ 2.5 | 0.8 ～ 2.5 | 1 ～ 3 | - | - | - | - | - | - | - | - | - | - | - |
| Lubrication Condition | Unlubricated | Unlubricated | - | Unlubricated | - | - | - | Unlubricated | - | Unlubricated | - | Unlubricated | - | - | Unlubricated | - | - | - | - | Unlubricated | Unlubricated | - | - | Unlubricated | - | - | - | - | - | - | Unlubricated | Unlubricated | Unlubricated | Unlubricated | - | - | - | - | - | - | Regular Lubrication | Unlubricated | - | - | - |
| Environment | Standard / Heat Resistant / Foreign Object Resistant | Standard / In Oil | - | Standard / In Oil | - | - | - | Standard / Heat Resistant / Foreign Object Resistant | - | Vibration Resistant / In Water | - | Standard / In Oil | - | - | Standard / Heat Resistant / In Oil | - | - | - | Food | Standard / In Oil | Standard / Heat Resistant / Foreign Object Resistant | - | - | Standard | - | - | - | - | - | Food | Standard / Foreign Object Resistant / Vibration Resistant / In Oil / In Water / In Seawater | Standard / Foreign Object Resistant / Vibration Resistant / In Water | Standard / In Oil | Standard | - | - | - | - | - | Food | Standard | Standard | - | - | - |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Metallic
-
Bushing Material
-
Metric / Inch
-
I.D. d(mm)
-
I.D. d(inch)
-
O.D. D(mm)
-
O.D. D(inch)
- 0.13 in (1/8")
- 0.19 in (3/16")
- 0.25 in (1/4")
- 0.31 in (5/16")
- 0.38 in (3/8")
- 0.50 in (1/2")
- 0.63 in (5/8")
- 0.69 in (11/16")
- 0.75 in (3/4")
- 0.81 in (13/16")
- 0.88 in (7/8")
- 0.94 in (15/16")
- 1.00 in (1")
- 1.13 in (1-1/8")
- 1.25 in (1-1/4")
- 1.50 in (1-1/2")
- 1.56 in (1-9/16")
- 1.75 in (1-3/4")
- 1.81 in (1-13/16")
- 2.00 in (2")
- 2.38 in (2-3/8")
- 3.00 in (3")
- 3.75 in (3-3/4")
- 4.50 in (4-1/2")
- 6.00 in (6")
-
Overall Length L(mm)
- 2
- 02
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 3
- 03
- 3.5
- 3.8
- 4
- 04
- 4.4
- 4.5
- 4.8
- 05
- 5
- 5.5
- 5.9
- 06
- 6
- 6.5
- 7
- 7.5
- 08
- 8
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 20
- 21
- 21.5
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31.5
- 32
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 42
- 42.5
- 45
- 47
- 48
- 50
- 51
- 52
- 55
- 56
- 57
- 58
- 59
- 60
- 62
- 63
- 64
- 65
- 67
- 67.5
- 68
- 69
- 70
- 73
- 74
- 75
- 76
- 77
- 78
- 80
- 81
- 82
- 85
- 86
- 90
- 95
- 97
- 100
- 103
- 108
- 110
- 112
- 115
- 120
- 125
- 128
- 140
- 141
- 150
- 158
- 170
- 175
- 188
- 200
- 240
-
Overall Length L(inch)
- 0.25 in (1/4")
- 0.31 in (5/16")
- 0.38 in (3/8")
- 0.50 in (1/2")
- 0.56 in (9/16")
- 0.63 in (5/8")
- 0.75 in (3/4")
- 0.84 in (27/32")
- 0.88 in (7/8")
- 1.00 in (1")
- 1.03 in (1-1/32")
- 1.25 in (1-1/4")
- 1.33 in (1-5/16")
- 1.50 in (1-1/2")
- 1.63 in (1-5/8")
- 1.75 in (1-3/4")
- 1.78 in (1-25/32")
- 2.19 in (2-3/16")
- 2.25 in (2-1/4")
- 2.38 in (2-3/8")
- 2.50 in (2-1/2")
- 2.63 in (2-5/8")
- 2.81 in (2-13/16")
- 2.95 in (2-61/64")
- 2.98 in (2-63/64")
- 3.00 in (3")
- 3.09 in (3-3/32")
- 3.25 in (3-1/4")
- 4.00 in (4")
- 4.13 in (4-1/8")
- 4.50 in (4-1/2")
- 5.00 in (5")
- 6.00 in (6")
- 8.00 in (8")
-
Maximum Allowable PV Value Range(N/mm2•m/s)
-
Maximum Allowable PV Value(N/mm2•m/s)
-
Max. Allowable Surface Pressure P(N/mm2)
-
Max. Allowable Velocity V(m/s)
-
Housing Style
-
Housing Material
-
Length Type
-
Mounting Shaft Fits
-
Mounting Hole Fits
-
Thickness T(mm)
-
Lubrication Condition
-
Environment
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
- 13 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy