(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Linear Ball Bushings（Page2）
-
Linear Ball Bushings - Bearing type, high block, double.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Spec-designed to save the time of manufacturing a housing and installing a linear bushing, and to have a width (W Dim.) narrower than Wide Block.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Linear Ball Bushings - With flange and clamping lever.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
MISUMI original. The Clamp Lever Type can position workloads easier compared to the Standard Type.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Flanged, double, compact.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
This Compact Type is 4~5mm smaller in flange diameter (H Dim.) and 2mm smaller in O.D. (D Dim.) than Standard Type.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - With pilot flange, single compact, threaded mounting holes.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Allows to reduce the cost for tapping, takes effect in connecting soft materials and can be screw-tightened from above.- Volume Discount
- METRIC
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Flanged, single, with lubrication unit.
MISUMI
Standard length ball bushing, with configurable pilot flange (circular, square or compact) that facilitates its assembly thanks to the fact that it can be screwed on. With automatic lubrication thanks to the integrated lubrication unit. Significantly extends maintenance periods for the bushing, which translates into cost reduction and time savings. Available in carbon steel or stainless steel (both hardened).
- Volume Discount
- METRIC
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Single, IKO brand. LM Series.
IKO
It is the most common single bushing of the IKO brand, with configurable dimensions in millimeters. Available in carbon steel or stainless steel (both hardened), selectable with or without dust seals.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Linear Ball Bushings - With central flange, double. LMC-L Series.
THK
[Features]
· Linear bushing of center flange type.
· Available in 3 types, round, rectangular and round chamfered. Each of these is also available as a long type.- Volume Discount
Days to Ship: 8 Days or more -
Linear Ball Bushings - Wide block bearing type, single, Super Smart bushing.
Thomson Linear
Open Pillow blocks are for use with continuous supported shafting
For use with Metric class Shafting.
Ball Bushing Bearings are included and factory installed in each Pillow Block- CAD ：
- 3D
Days to Ship: 16 Days -
Linear Ball Bushings - Single. Super Series (Inches).
Thomson Linear
The Super Ball Bushing bearing is self-aligning, lightweight and adjustable with a low coefficient of friction.
The wear-resistant, engineered-polymer retainers and outer sleeves reduce inertia and noise in critical, high speed applications. Radially floating bearing plates. When installed in an adjustable housing, the Super Ball Bushing Bearing may be adjusted to a specific diametrical fit-up for accurate and repeatable movement.- CAD ：
- 3D
Days to Ship: 5 Days -
Linear Ball Bushings - Bearing type, high block, with Dowel pin holes.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
MISUMI original. The Dowel Hole Type requires less time for assembly and has better repeatability.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Linear Ball Bushings - Linear/Rotating, single or double.
MISUMI
Capable of rotary motion, finite linear motion, and the combination of both.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Linear/Rotating, flanged.
MISUMI
•TYPE: Flange
•Motion: Linear/Rotary
•Style: Standard
•Outer Cylinder Material: 52100 Bearing Steel Equivalent
•Flange Type: Standard Flange- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Felt seal - For FLM series linear ball bushings.
THK
Optimal if enhanced dust-proofing is required, or if the seal resistance is to be reduced.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Round flanged, stainless steel, single. LMF-M Series.
THK
[Features]
· The outer cylinder of the standard-type linear bushing and the flange are integrated and mounting is easily achieved by bolting directly to the housing.- Volume Discount
Days to Ship: 8 Days or more -
Linear Ball Bushings - With square flange, long type, aluminum body. LFWL Series.
Ozak Seiko
Long linear bushing that integrates two single linear bushings inside its aluminum body and adds a square flange that facilitates its assembly thanks to its bolt-on design. This bushing is ideal when it is required to lighten the weight of the structure or application mechanism. It is lubricated by means of a grease fitting included with the bushing.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 13 Days or more -
Linear Ball Bushings - Wide Block Bearing Type, Super (Inches). SPB Series.
Thomson Linear
Closed Pillow blocks are for use with end supported shafting. For use with Class L shafting. Ball Bushing Bearings included, factory installed, in each Pillow Block.
- CAD ：
- 3D
Days to Ship: 16 Days -
Linear Ball Bushings - Single. Super Smart Series (Inches).
Thomson Linear
These universally self-aligning bearings offer twice the load capacity or eight times the travel life of our Super Ball Bushing® bearing. This patented product provides smooth, quiet, low drag linear movement at 6x the load capacity or 216 x the L10 travel life of a conventional steel linear ball bushing bearing.
- CAD ：
- 3D
Days to Ship: 5 Days or more -
Linear Ball Bushings - Single/Double, with MX lubrication unit.
MISUMI
Electroless Ni-plated types are added as new. [3/31/2023]
Automatic Lubricateion drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Linear Ball Bushings - Center flanged, double, with MX lubrication unit.
MISUMI
Electroless Ni-Plated types are addes as new. [3/31/2023]
Automatic Lubricateion drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Linear Ball Bushings - Pilot flanged, single, with MX lubrication unit.
MISUMI
Electroless Ni-Plated types are addes as new. [3/31/2023]
Automatic Lubricateion drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 6 Days or more Show Stock Products
-
Linear Ball Bushings - Pilot flanged, double, with MX lubrication unit.
MISUMI
Electroless Ni-Plated types are addes as new. [3/31/2023]
Automatic Lubricateion drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Linear Ball Bushings - Bearing type, high block, with MX lubrication unit.
MISUMI
Automatic Lubricateion drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Linear Ball Bushings - With central pilot flange, double.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of electroless Ni-plated types are added. [3/31/23]
Full Length is 1.5 times of Single and Allowable Moment 4.3 times. Suitable for insufficient space for Double Type- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Center flange, double, long type.
MISUMI
A load can be placed near the center of the linear bushing to evenly distribute the load and space.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Bearing type, high block, with clamping lever.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
MISUMI original. The Clamp Lever Type can position workloads easier compared to the Standard Type.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Linear Ball Bushings - Bearing type, double, compact.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
The compact type is Max. 6mm lower in height (H dimension) and Max. 3mm smaller in width (W dimension) than the Standard Type.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Flanged, double (Inches).
MISUMI
Double flanged ball bushings with configurable shape (circular, square or compact) with selectable dimensions in inches. Available in hardened carbon steel.
- Volume Discount
- INCH
Days to Ship: 29 Days or more -
Linear Ball Bushings - Center Flanged, Double (Inches).
MISUMI
Double bushings with selectable dimensions in inches. Adds a configurable center flange shape (circular, square or compact) that allows a load to be placed near the center of the linear bushing to evenly distribute the load and space. Available in hardened carbon steel.
- Volume Discount
- INCH
Days to Ship: 26 Days or more -
Linear Ball Bushings - Single. LM-MG Series (Stainless Steel).
THK
This linear bushing has an outer diameter formed by a highest-precision cylinder, and is used in a wide range of applications. Part of the milli series, the most widely used series in Japan.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Bearing type, wide block, long. SL Series.
THK
SC long type. The case unit has 2 standard type linear bushings embedded in an aluminum case.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - With lubrication holes, simple. L-OH Series.
Ozak Seiko
Standard type ball bushing with lubrication holes that allow for easier and more constant lubricant replenishment, which will improve its performance and life time. Available in hardened carbon steel with the possibility of adding an anti-rust treatment with a greater effect than stainless steel. Ideal bushing if cost savings in maintenance are required.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 12 Days or more -
Spacers - For linear ball bushings.
MISUMI
Spacers for Linear Bushing installation.
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Linear Ball Bushings - Flanged, single, with MX lubrication unit.
MISUMI
Automatic Lubrication drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Spacer - For height adjustment of linear ball bushings.
MISUMI
Bushing Position Changeable in limited Thrust direction
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Linear Ball Bushings - Single/Double, compact.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of electroless Ni-plated types are added. [3/31/23]
2mm smaller in O.D. (D dimension) than Standard Type.- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - Double (Inches). U-LMUW Series.
MISUMI
Double ball bushing, longer than the single bushing. With selectable dimensions in inches. Available in hardened carbon steel.
- Volume Discount
- INCH
Days to Ship: 29 Days or more -
Linear Ball Bushings - With pilot flange, single (Inches).
MISUMI
Single bushings with selectable dimensions in inches. With configurable pilot flange shape (circular, square or compact) which is not completely on the end of the bushing, leaving enough space for mounting from the opposite side of the installation. Available in hardened carbon steel.
- Volume Discount
- INCH
Days to Ship: 29 Days or more -
Linear Ball Bushings - With pilot flange, double (Inches).
MISUMI
Double bushings with selectable dimensions in inches. With configurable pilot flange shape (circular, square or compact) which is not completely on the end of the bushing, leaving enough space for mounting from the opposite side of the installation. Available in hardened carbon steel.
- Volume Discount
- INCH
Days to Ship: 29 Days or more -
Stoppers - For lineal ball bushings
MISUMI
Retaining Plates for Linear Bushing installation.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Linear Ball Bushings - With square flange, stainless steel, long. LMK-ML series.
THK
Type with LMF-L type flange having flats at 4 locations. Can be used in compact designs since the core height is lower than with the round flange type.
- Volume Discount
Days to Ship: 8 Days or more -
Linear Ball Bushings - Compact, double bearing type. SH-L Series.
THK
SH long type. The case unit has 2 standard type linear bushings embedded in an aluminum case.
- Volume Discount
Days to Ship: 8 Days or more -
Linear Ball Bushings - With square flange, stainless steel, single. LMK-M series.
THK
Type with LMF type flange having flats at 4 locations. Can be used in compact designs since the core height is lower than with the round flange type.
- Volume Discount
Days to Ship: 8 Days or more -
Linear Ball Bushings - Single (economy model). LM Series.
Ozak Seiko
It is the most common single bushing, with configurable dimensions in millimeters. Available in hardened carbon steel with or without dust seals. The economical series is ideal for cost reduction.
- Volume Discount
Days to Ship: 8 Days or more -
Linear Ball Bushings - Single, Super. SPM Series.
Thomson Linear
The Super Ball Bushing bearing is self-aligning, lightweight and adjustable with a low coefficient of friction. The wear-resistant, engineered-polymer retainers and outer sleeves reduce inertia and noise in critical, high speed applications.
- CAD ：
- 3D
Days to Ship: 5 Days or more -
Linear Ball Bushings - Single, Open, Super (Inches).
Thomson Linear
The Super Ball Bushing bearing is self-aligning, lightweight and adjustable with a low coefficient of friction.
The wear-resistant, engineered-polymer retainers and outer sleeves reduce inertia and noise in critical, high speed applications. Radially floating bearing plates. When installed in an adjustable housing, the Super Ball Bushing Bearing may be adjusted to a specific diametrical fit-up for accurate and repeatable movement.- CAD ：
- 3D
Days to Ship: 16 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| TYPE |
| Motion |
| Style |
| Outer Cylinder Material |
| Outer Cylinder Surface Finish |
| For Shaft Size(mm) |
| For Shaft Size(inch) |
| Overall Length L(mm) |
| Overall Length L(inch) |
| Flange Type |
| Lubrication Type |
| O.D. D(mm) |
| O.D. D(inch) |
| Type |
| Length |
| Ball Recirculating Type |
| Precision |
| Eccentricity(µm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | IKO | THK | Thomson Linear | Thomson Linear | MISUMI | MISUMI | MISUMI | THK | THK | Ozak Seiko | Thomson Linear | Thomson Linear | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | THK | THK | Ozak Seiko | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | THK | THK | THK | Ozak Seiko | Thomson Linear | Thomson Linear |
| Product Series | Linear Ball Bushings - With pilot flange, single compact, threaded mounting holes. | Linear Ball Bushings - Flanged, single, with lubrication unit. | Linear Ball Bushings - With central flange, double. LMC-L Series. | Linear Ball Bushings - Wide block bearing type, single, Super Smart bushing. | Linear Ball Bushings - Bearing type, high block, with Dowel pin holes. | Linear Ball Bushings - Round flanged, stainless steel, single. LMF-M Series. | Linear Ball Bushings - With square flange, long type, aluminum body. LFWL Series. | Linear Ball Bushings - Wide Block Bearing Type, Super (Inches). SPB Series. | Linear Ball Bushings - Single/Double, with MX lubrication unit. | Linear Ball Bushings - Center flanged, double, with MX lubrication unit. | Linear Ball Bushings - Pilot flanged, single, with MX lubrication unit. | Linear Ball Bushings - Pilot flanged, double, with MX lubrication unit. | Linear Ball Bushings - Bearing type, high block, with MX lubrication unit. | Linear Ball Bushings - Bearing type, high block, with clamping lever. | Linear Ball Bushings - Single. LM-MG Series (Stainless Steel). | Linear Ball Bushings - Bearing type, wide block, long. SL Series. | Linear Ball Bushings - With lubrication holes, simple. L-OH Series. | Linear Ball Bushings - Flanged, single, with MX lubrication unit. | Linear Ball Bushings - With square flange, stainless steel, long. LMK-ML series. | Linear Ball Bushings - Compact, double bearing type. SH-L Series. | Linear Ball Bushings - With square flange, stainless steel, single. LMK-M series. | ||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Days to Ship | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 16 Days | 5 Days | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 13 Days or more | 16 Days | 5 Days or more | 8 Days or more | 8 Days or more |
6 Days or more
Show Stock Products | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 29 Days or more | 26 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 12 Days or more | 9 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 29 Days or more | 29 Days or more | 29 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 5 Days or more | 16 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||
| TYPE | Housings | Flange | Flange | Pilot Flange | Flange | Straight | - | Housings | Straight | Housings | Straight | Flange | - | - | Flange | Housings | Straight | Straight | Flange | Flange | Flange | Housings | Flange | Flange | Housings | Housings | Flange | Flange | Straight | - | Straight | Related Components | Flange | Related Components | Straight | Straight | Flange | Flange | Related Components | Flange | - | - | Straight | Straight | Straight |
| Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | - | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear/Rotary | Linear/Rotary | - | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | - | Linear Motion | - | Linear Motion | Linear Motion | Linear Motion | Linear Motion | - | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion |
| Style | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | Standard | Standard | Open |
| Outer Cylinder Material | Steel | Steel | Steel | Steel | Steel | Steel / Stainless Steel | Steel | - | - | Steel | Steel / Stainless Steel | Steel | - | Stainless Steel | Aluminum | - | - | Steel | Steel | Steel | Steel | Steel | Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel | Steel | Stainless Steel | Steel / Stainless Steel | Steel | Steel / Aluminum | Steel | - | Steel | Steel | Steel | Steel | - | Steel | Steel | Stainless Steel | Steel | - | - |
| Outer Cylinder Surface Finish | Plated | None / Plated | None / Plated | None | None / Plated | None | None | - | - | Plated | None | - | - | - | None / Plated | - | - | None | None | None | None | Plated | None | None / Plated | None | Plated | None | None | - | - | None / Plated | - | None / Plated | - | None | None | None | None | - | - | - | - | None | - | - |
| For Shaft Size(mm) | 6 ～ 30 | 16 ～ 30 | 6 ～ 16 | 6 ～ 30 | 10 ～ 50 | 6 ～ 100 | 6 ～ 25 | 16 ～ 30 | - | 8 ～ 30 | 5 ～ 20 | 6 ～ 20 | - | 6 ～ 30 | 16 ～ 40 | - | - | 10 ～ 50 | 10 ～ 50 | 10 ～ 50 | 10 ～ 50 | 10 ～ 30 | 6 ～ 30 | 6 ～ 40 | 16 ～ 30 | 4 ～ 30 | - | - | 3 ～ 40 | 6 ～ 30 | 6 ～ 50 | - | 10 ～ 50 | - | 6 ～ 16 | - | - | - | - | 6 ～ 30 | 3 ～ 20 | 6 ～ 30 | 6 ～ 60 | 8 ～ 50 | - |
| For Shaft Size(inch) | - | - | - | - | - | - | - | - | 0.19 in (3/16") ～ 2.00 in (2") | - | - | - | - | - | - | 0.25 in (1/4") ～ 2.00 in (2") | 0.50 in (1/2") ～ 1.50 in (1-1/2") | - | - | - | - | - | - | - | - | - | 0.25 in (1/4") ～ 1.50 in (1-1/2") | 0.25 in (1/4") ～ 1.50 in (1-1/2") | - | - | - | - | - | - | - | 0.25 in (1/4") ～ 1.50 in (1-1/2") | 0.25 in (1/4") ～ 1.50 in (1-1/2") | 0.25 in (1/4") ～ 1.50 in (1-1/2") | - | - | - | - | - | - | 0.50 in (1/2") ～ 2.00 in (2") |
| Overall Length L(mm) | 37 ～ 202 | 37 ～ 123 | 35 ～ 70 | 19 ～ 64 | 39 ～ 128 | 17 ～ 175 | 35 ～ 112 | 43 ～ 79 | - | 32 ～ 202 | - | - | - | 17 ～ 64 | 150 ～ 300 | - | - | 39 ～ 220 | 65 ～ 220 | 39 ～ 128 | 65 ～ 220 | 45 ～ 156 | 29 ～ 90 | 49 ～ 230 | 62 ～ 155 | 27 ～ 138 | - | - | 10 ～ 80 | 48 ～ 140 | 19 ～ 100 | - | 39 ～ 128 | - | 19 ～ 70 | - | - | - | - | 35 ～ 123 | 23 ～ 86 | 17 ～ 64 | 19 ～ 110 | 25 ～ 100 | - |
| Overall Length L(inch) | - | - | - | - | - | - | - | - | 0.56 in (9/16") ～ 4.00 in (4") | - | - | - | - | - | - | 1.19 in ～ 5.00 in (5") | 1.25 in (1-1/4") ～ 3.00 in (3") | - | - | - | - | - | - | - | - | - | 1.375 in (1-3/8") ～ 5.688 in (5-11/16") | 1.375 in (1-3/8") ～ 5.688 in (5-11/16") | - | - | - | - | - | - | - | 1.375 in (1-3/8") ～ 5.688 in (5-11/16") | 0.750 in (3/4") ～ 3.000 in (3") | 1.375 in (1-3/8") ～ 5.688 in (5-11/16") | - | - | - | - | - | - | 1.25 in (1-1/4") ～ 4.00 in (4") |
| Flange Type | - | Standard Flange | Standard Flange | Pilot Flanged | Standard Flange | - | Center Flanged | - | - | - | - | - | - | Standard Flange | Standard Flange | - | - | - | Pilot Flanged | Pilot Flanged | Pilot Flanged | - | Pilot Flanged | Pilot Flanged | - | - | Standard Flange | Center Flanged | - | - | - | - | Standard Flange | - | - | - | Pilot Flanged | Pilot Flanged | - | Standard Flange | - | Standard Flange | - | - | - |
| Lubrication Type | Standard | Standard | Standard | Standard / Grease coating | With Lubrication Unit MX | Standard | Standard | Standard | Standard | Standard | - | - | - | Standard | Standard | Standard | Standard | With Lubrication Unit MX | With Lubrication Unit MX | With Lubrication Unit MX | With Lubrication Unit MX | With Lubrication Unit MX | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | With Lubrication Unit MX | - | Standard | Standard | Standard | Standard | - | Standard | Standard | Standard | Standard | Standard | Standard |
| O.D. D(mm) | 12 ～ 45 | 28 ～ 45 | 10 ～ 26 | 12 ～ 45 | 19 ～ 80 | 12 ～ 150 | 12 ～ 40 | - | - | 15 ～ 45 | - | - | - | 12 ～ 45 | 42 ～ 84 | - | - | 19 ～ 80 | 19 ～ 80 | 19 ～ 80 | 19 ～ 80 | 19 ～ 45 | 12 ～ 45 | 15 ～ 65 | 28 ～ 45 | 8 ～ 45 | - | - | 7 ～ 60 | - | 12 ～ 80 | - | 19 ～ 80 | - | 10 ～ 26 | - | - | - | - | 12 ～ 45 | - | 12 ～ 45 | 12 ～ 90 | 16 ～ 75 | - |
| O.D. D(inch) | - | - | - | - | - | - | - | - | 0.375 in (3/8") ～ 3.00 in (3") | - | - | - | - | - | - | - | 0.875 in (7/8") ～ 2.375 in (2-3/8") | - | - | - | - | - | - | - | - | - | 0.5000 in (1/2") ～ 2.3750 in (2-3/8") | 0.5000 in (1/2") ～ 2.3750 in (2-3/8") | - | - | - | - | - | - | - | 0.5000 in (1/2") ～ 2.3750 in (2-3/8") | 0.5000 in (1/2") ～ 2.3750 in (2-3/8") | 0.5000 in (1/2") ～ 2.3750 in (2-3/8") | - | - | - | - | - | - | 0.875 in (7/8") ～ 3.00 in (3") |
| Type | Housing Type | with End Flange | with End Flange | - | with End Flange | - | with Center Flange | - | - | Housing Type | - | - | Related Components | with End Flange | with End Flange | - | - | Standard | - | - | - | Housing Type | - | - | - | Housing Type | - | - | Standard | Pillow Blocks Wide Block Type | Standard | Related Components | with End Flange | Related Components | Standard | - | - | - | Related Components | with End Flange | Housing Type | with End Flange | Standard | - | - |
| Length | Medium / Medium Long / Long | Standard / Double | Double | Standard | Standard | Standard | Long | Standard | Standard | Standard / Double / Long | Standard / Double | Standard / Double | - | Standard | Long | Standard | Standard | Standard | - | Standard | - | Standard / Double | - | - | Standard | Double | - | - | Standard | Long | Standard | - | Standard | - | Standard | - | - | - | - | Long | Long | Standard | Standard | Standard | Standard |
| Ball Recirculating Type | Double | Single / Double | Double | Single | Single | Single | Double | - | - | Single / Double | - | - | - | Single | Double | - | - | Single / Double | Double | Single | Double | Single / Double | Double | Double | Single / Double | Double | Double | Double | Single | Double | Single | - | Single | - | Single / Double | Double | Single | Double | - | Double | Double | Single | Single | - | - |
| Precision | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | - | - | - | High Grade | - | - | - | High Grade | High Grade | - | - | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | - | High Grade | - | High Grade | High Grade | High Grade | High Grade | - | High Grade | High Grade | High Grade | High Grade | - | - |
| Eccentricity(µm) | - | 12 ～ 20 | 15 | 12 ～ 15 | 12 ～ 20 | 12 ～ 30 | 12 ～ 15 | - | - | - | - | - | - | 12 ～ 15 | - | - | - | 12 ～ 25 | 15 ～ 25 | 12 ～ 20 | 15 ～ 25 | - | 15 ～ 20 | 20 ～ 30 | - | - | 15.24(0.6 µin) ～ 25.4(1 µin) | 15.24(0.6 µin) ～ 25.4(1 µin) | 8 ～ 20 | - | - | - | 12 ～ 20 | - | 12 ～ 15 | 12.7(0.5 µin) ～ 25.4(1 µin) | 12.7(0.5 µin) ～ 20.32(0.8 µin) | 15.24(0.6 µin) ～ 25.4(1 µin) | - | 15 ～ 20 | - | 12 ～ 15 | - | - | - |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Motion
-
Style
-
Standard -
-
-
Outer Cylinder Material
-
Outer Cylinder Surface Finish
-
Metric / Inch
-
For Shaft Size(mm)
-
For Shaft Size(inch)
-
Overall Length L(mm)
- 10
- 12
- 13
- 15
- 16
- 17
- 18
- 19
- 20
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 32
- 33
- 35
- 36
- 37
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 90
- 91
- 92
- 93
- 94
- 96
- 97
- 99
- 100
- 102
- 103
- 104
- 105
- 106
- 109
- 110
- 111
- 112
- 114
- 115
- 117
- 118
- 120
- 121
- 122
- 123
- 125
- 128
- 130
- 132
- 134
- 135
- 136
- 138
- 140
- 143
- 144
- 145
- 148
- 150
- 151
- 152
- 153
- 154
- 155
- 156
- 157
- 158
- 160
- 165
- 167
- 170
- 175
- 176
- 177
- 184
- 185
- 187
- 192
- 199
- 200
- 202
- 209
- 211
- 215
- 220
- 230
- 243
- 250
- 300
- 310
-
Overall Length L(inch)
- 0.56 in (9/16")
- 0.75 in (3/4")
- 0.750 in (3/4")
- 0.875 in (7/8")
- 1.19 in
- 1.25 in (1-1/4")
- 1.250 in (1-1/4")
- 1.31 in (1-5/16")
- 1.375 in (1-3/8")
- 1.50 in (1-1/2")
- 1.500 in (1-1/2")
- 1.594 in (1-19/32")
- 1.625 in (1-5/8")
- 1.69 in
- 1.75 in (1-3/4")
- 1.875 in (1-7/8")
- 1.94 in
- 2.06 in
- 2.25 in (2-1/4")
- 2.250 in (2-1/4")
- 2.375 in (2-3/8")
- 2.625 in (2-5/8")
- 2.81 in
- 2.813 in (2-13/16")
- 2.88 in
- 3.00 in (3")
- 3.000 in (3")
- 3.094 in (3-3/32")
- 3.20 in
- 3.38 in
- 3.50 in (3-1/2")
- 3.63 in (3-5/8")
- 3.75 in (3-3/4")
- 3.95 in
- 4.00 in (4")
- 4.281 in (4-9/32")
- 4.50 in (4-1/2")
- 4.75 in (4-3/4")
- 5.00 in (5")
- 5.000 in (5")
- 5.33 in
- 5.688 in (5-11/16")
- 6.00 in (6")
- 7.50 in (7-1/2")
- 8.00 in (8")
- 9.00 in (9")
-
Flange Type
-
Lubrication Type
- Standard
- Grease coating
- With Lubrication Unit MX
-
O.D. D(mm)
-
O.D. D(inch)
-
Type
-
Length
-
Ball Recirculating Type
-
Precision
-
Eccentricity(µm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 5 Days or Less
- 6 Days or Less
- 8 Days or Less
- 9 Days or Less
- 11 Days or Less
- 12 Days or Less
- 13 Days or Less
- 14 Days or Less
- 15 Days or Less
Related Categories to Linear Ball Bushings
-
- Ball Guides
- Ball Screws
- Ball Screw Support Units
- Oil Free Bushings, Washers
- Oil Free Plates, Guide Rails
- Linear Guides
- Linear Ball Bushings
- Cable Carriers
- Linear Shafts
- Lead Screws, Slide Screws
- Cross Roller
- Linear Rails, V Guides, Oil Free Guides Units
- Shaft Collars
- Actuators
- Shaft Supports
- Spline Shafts
-
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy