(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
MISUMI original. The Clamp Lever Type can position workloads easier compared to the Standard Type.
Part Number
Configured Part Number is shown.
Type | Linear Bushing | Housing | Collar / Thread | Clamp Lever (>> Click here) |
Lever | Lever Thread | Nut | Ambient Operating Temp. | |||||
Single, Right Lever | Single, Left Lever | [ M ]Material | [ S ]Surface Treatment | [ M ]Material | [ M ]Material | [ S ]Surface Treatment | [ M ]Material | [ M ]Material | |||||
Single | Double | Single | Double | (>> Click here) | |||||||||
LHSSC | LHSSWC | LHSLC | LHSLWC | LMU | Aluminum Alloy |
Clear Anodize Treatment |
304 Stainless Steel | CLFSC | Zinc Diecast |
Baked Paint Finish | 303 Stainless Steel | Stainless Steel (Stainless Steel) |
-20~80°C |
Part Number | |
LHSSC16 LHSLC16L LHSSC16G LHSLC20H |
(L Type Greased) (G Type Greased) (H Type Greased) |
Part Number | L | L1 | L2 | L3 | L4 | h | W | H | (G) | J | K | P | ℓ | M1 (Effective Length) | M2 (Effective Length) | M3 | d1xt | C | ||||||||
Type | dr | Tolerance | Single | Double | Single | Double | Single | Double | Single | Double | Single | Double | ||||||||||||||
Single | Double | |||||||||||||||||||||||||
LHSSC LHSLC LHSSWC LHSLWC |
16 | 0 -0.009 |
0 -0.010 |
62 | 99 | 32 | 52 | 18 | 65 | 24 | 31 | 31 | 24.5 | 27 | 36 | 49 | 43.7 | 38 | 30 | 12.5 | 7 | M6 (13) |
M6 (29) |
M4 | 9x7 | 1 |
(For M5 Screws) | ||||||||||||||||||||||||||
20 | 0 -0.010 |
0 -0.012 |
67 | 109 | 36 | 58 | 70 | 23 | 33 | 32 | 27 | 31 | 42 | 54 | 40.7 | 44 | 30 | 8 | M8 (15) |
M8 (34) |
11x8 | |||||
(For M6 Screws) | ||||||||||||||||||||||||||
25 | 86 | 145 | 42 | 80 | 22 | 100 | 30.5 | 41 | 40.5 | 31 | 37 | 52 | 65 | 45.7 | 53.5 | 30 | 13.5 | 9 | M10 (17) |
M10 (42) |
M5 | |||||
14x10 | ||||||||||||||||||||||||||
30 | 91 | 155 | 44 | 90 | 110 | 32 | 43 | 40 | 58 | 71 | 42.7 | 59 | 30 | M10 (17.5) |
M10 (48) |
(For M8 Screws) | ||||||||||
dr | Max. Thrust Load N | Basic Load Rating | Mass (g) | |||||
Greased | C (Dynamic) N | Co (Static) N | ||||||
Tightening Torque (N·m) | Single | Double | Single | Double | Single | Double | ||
16 | 250 | 1.5 | 775 | 1230 | 1180 | 2350 | 347 | 526 |
20 | 250 | 1.5 | 882 | 1400 | 1370 | 2740 | 438 | 686 |
25 | 250 | 3 | 980 | 1560 | 1570 | 3140 | 841 | 1387 |
30 | 500 | 3 | 1570 | 2490 | 2740 | 5490 | 1015 | 1689 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
LHSLC16 |
LHSLC20 |
LHSLC25 |
LHSLC30 |
LHSLWC16 |
LHSLWC20 |
LHSLWC25 |
LHSLWC30 |
LHSSC16 |
LHSSC20 |
LHSSC25 |
LHSSC30 |
LHSSWC16 |
LHSSWC20 |
LHSSWC25 |
LHSSWC30 |
Loading...
TYPE | Housings | Motion | Linear Motion | Style | Standard |
---|---|---|---|---|---|
Outer Cylinder Material | 52100 Bearing Steel Equivalent | Outer Cylinder Surface Finish | None | Lubrication Type | Standard |
Precision | High Grade | Ball Material | 52100 Bearing Steel Equivalent | Retainer Material | Plastic (Duracon M90 Equivalent) |
Seals | With Seal | Greased filled | Standard (Rust Prevent Oil) |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy