(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Linear Ball Bushings - Single Type. LMU/SLMU Series.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
The most standard type in linear ball bushing products.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Flanged, single.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
Easy to assemble with bolt-on flanges. The Opposite Counterbored Hole Type is also available.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - With round flange, single. LMF Series.
THK
The outer cylinder of the standard-type linear bushing and the flange are integrated and fitting is easily achieved by bolting directly to the housing.
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - Flanged, double.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
Easy to assemble with bolt-on flanges. The Opposite Counterbored Hole Type is also available.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Bearing type, wide block, single.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Spec-designed to save the time of manufacturing a housing and installing a linear bushing, and to be tightly secured to a workpiece through four mounting holes.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Compact flanged, long. LMH-L Series.
THK
Flange is oval-shaped. More suitable than the LMK-L type for compact designs due to lower core height.
With 2 standard retainers embedded, this product is optimal for sites subject to moment loads.
To lengthen the product life, the balls of the linear bushing are embedded in two races to support the load from the flats.
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - Single. LM Series.
THK
This linear bushing has an outer diameter formed by a highest-precision cylinder, and is used in a wide range of applications.
Part of the milli series, the most widely used series in Japan.
Days to Ship: | Same day or more |
---|
Show Stock Products
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of electroless Ni-plated types are added. [3/31/23]
Since the O.A.L. are shorter than the Single Type, space saving designing in L direction is possible.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - With square flange, single. LMK Series.
THK
Type with LMF type flange having flats at 4 locations. Can be used in compact designs since the core height is lower than with the round flange type.
Days to Ship: | 8 Days or more |
---|
Show Stock Products
Linear Ball Bushings - With pilot flange, double.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
Prevents the linear bushing from protruding toward the opposite side of its mounting side and enables to retain a sufficient space on the opposite side.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - With square flange, long. LMK-L Series.
THK
Type with LMF-L type flange having flats at 4 locations. Due to a lower core height, this type is more suitable for compact designs than the round flange type.
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - Linear/Rotating, single, no seals. ST, ST-B Series.
THK
Hardened shaft, recommended for use with outer diameter tolerance (k5, m5, n5 or p5).
[Features]
· In the ST type, the balls and ball cage are embedded in the inner side the of outer cylinder, which has been precision ground to ensure a cylindrical form
· The balls are arranged in a staggered form to that the load is equally distributed
· The ball cage is a machined cage made out of lightweight and highly rigid light alloy.
· A slide ring and retainer ring are provided on two sides of the internal diameter of the outer cylinder to prevent overrun of the ball cage.
· With this structure, it is possible to achieve rotating, linear and mixed action with a low friction coefficient.
· Stroke length can be up to double the range of movement of the ball cage within the outer cylinder
· Suitable for a wide range of applications where it is necessary to obtain high accuracy at a low price, including the ink roll parts of a printing machine, the work chuck of a punching press work, press feeders, the work head of an electric discharge machine, the correction device of a take-up roll, textile machines, strain measuring equipment, optical measuring device spindle, copiers, etc.
· Enables rotation with extremely low friction coefficient (=0.0006 to 0.0012) due to point contacts between the balls and ball rolling surface, and the separation of the balls within the ball cage.
· Since the cross-sectional profile is simply the combination of the thin-walled outer cylinder and the balls, the outer diameter of this bearing is small and it is suitable for lightweight and space-saving compact designs.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Bearing type, wide block, long. SL Series.
THK
SC long type. The case unit has 2 standard type linear bushings embedded in an aluminum case.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Compact flanged, single. LMH Series.
THK
The flange and outer cylinder are integrated and the flange is oval-shaped. This gives a lower core height, making this type more suitable for compact designs than the LMK type.
To lengthen the product life, the balls of the linear bushing are embedded in two races to support the load from the flats.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Linear/Rotating, single, with seals. Series ST-UU, ST-UUB.
THK
Hardened shaft, recommended for use with outer diameter tolerance (k5, m5, n5 or p5).
[Features]
· [Extremely low friction coefficient] Enables rotation with extremely low friction coefficient (=0.0006 to 0.0012) due to point contacts between the balls and ball rolling surface, and the separation of the balls within the ball cage.
· [Compact-design] Since the cross-sectional profile is simply the combination of the thin-walled outer cylinder and the balls, the outer diameter of this bearing is small and it is suitable for lightweight and space-saving compact designs.
· [High accuracy and low price] The sliding parts can be manufactured at low cost and a high level of accuracy is obtained.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Flanged, double. LHF Series.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Full Length is 1.5 times of Single and Allowable Moment 4.3 times. Suitable for insufficient space for Double Type
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Double, long, LM-L type.
THK
With 2 standard retainers embedded, this product is optimal for sites subject to moment loads and reduces assembly time.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - With pilot flange, single.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
Prevents the linear bushing from protruding toward the opposite side of its mounting side and enables to retain a sufficient space on the opposite side.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - With central flange, double.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
A load can be placed near the center of the linear bushing to evenly distribute the load and space.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Single/Double, compact.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of electroless Ni-plated types are added. [3/31/23]
2mm smaller in O.D. (D dimension) than Standard Type.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Single. LME Series.
THK
This linear bushing has an outer diameter formed by a highest-precision cylinder, and is used in a wide range of applications. It is part of the milli size series, which is in general use in Europe.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Linear/Rotating, single or double.
MISUMI
Capable of rotary motion, finite linear motion, and the combination of both.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - With round flange, long type. LMF-L Series.
THK
The outer cylinder of the standard-type linear bushing and the flange are integrated and mounting is easily achieved by bolting directly to the housing.
With 2 standard retainers embedded, this product is optimal for sites subject to moment loads.
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - Bearing type, wide block. SC Series.
THK
Case unit has standard-type linear bushing embedded in small lightweight aluminum case. Can be mounted by simply bolting to table.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Center flange, double, long type.
MISUMI
A load can be placed near the center of the linear bushing to evenly distribute the load and space.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Flanged, simple, compact.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
This Compact Type is 4~5mm smaller in flange diameter (H Dim.) and 2mm smaller in O.D. (D Dim.) than Standard Type.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Single. LM-GA Series (With metal retainers).
THK
[Features]
· Standard type. Equivalent to LM type of widely used milli size series, but including metal retainer.
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - Flanged, miniature.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
O.D. of these bushings is designed to be 5 to 8mm smaller than those of conventional flanged linear bushings to save space.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Single. LM-MG Series (Stainless Steel).
THK
This linear bushing has an outer diameter formed by a highest-precision cylinder, and is used in a wide range of applications. Part of the milli series, the most widely used series in Japan.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Compact, single bearing type. SH series.
THK
Case unit is based on LM case unit SC-type with standard linear bushing embedded in small lightweight aluminum case. Compared to the SC type, this type is more suited for compact designs. Any mounting direction is acceptable and lifetime performance is enhanced due to 2 races of load-bearing balls on the case upper face.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Bearing type, double, compact.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
The compact type is Max. 6mm lower in height (H dimension) and Max. 3mm smaller in width (W dimension) than the Standard Type.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Bearing type, wide block, with clamping lever.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
MISUMI original. The Clamp Lever Type can position workloads easier compared to the Standard Type.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Bearing type, wide block, with MX lubrication unit.
MISUMI
Automatic Lubricateion drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Bearing Type, Wide Block, Long/Extra Long.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Spec-designed to save the time of manufacturing a housing and installing a linear bushing, and to be tightly secured to a workpiece through four mounting holes.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Center flange, double, special length.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of electroless Ni-plated types are added. [3/31/23]
Full Length is 1.5 times of Single and Allowable Moment 4.3 times. Suitable for insufficient space for Double Type
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Miniature, single. LMS Series.
IKO
Because its miniature size, it is possible to design compact machines and mechanisms. Available in carbon steel and stainless steel. This model does not have the option of dust seals.
Days to Ship: | 11 Days or more |
---|
Linear Ball Bushings - Bearing type, with single open bushing. Super Smart Series.
Thomson Linear
Open single ball bushing, designed for applications on continuously supported shafts. The bushing is a Super Smart series bushing that is self-aligning and offers twice the load capacity or eight times the life of the SUPER series bushings. It incorporates a wide aluminum housing, which facilitates the mounting of a plate from the top. Configurable dimensions in millimeters, compatible with linear shafts in millimeters.
Days to Ship: | 16 Days |
---|
Linear Ball Bushings - Flanged, double, with MX lubrication unit.
MISUMI
Automatic Lubricateion drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - Bearing type, compact.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
The compact type is Max. 6mm lower in height (H dimension) and Max. 3mm smaller in width (W dimension) than the Standard Type.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Bearing type, wide block, with Dowel pin holes.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
MISUMI original. The Dowel Hole Type requires less time for assembly and has better repeatability.
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - With flange and clamping lever.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
MISUMI original. The Clamp Lever Type can position workloads easier compared to the Standard Type.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - With central flange, double. LMC-L Series.
THK
[Features]
· Linear bushing of center flange type.
· Available in 3 types, round, rectangular and round chamfered. Each of these is also available as a long type.
Days to Ship: | 8 Days or more |
---|
Linear Ball Bushings - Wide block bearing type, single, Super Smart bushing.
Thomson Linear
Open Pillow blocks are for use with continuous supported shafting
For use with Metric class Shafting.
Ball Bushing Bearings are included and factory installed in each Pillow Block
Days to Ship: | 16 Days |
---|
Linear Ball Bushings - Standard/pilot flanged, double, long type.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Bolt-on flange offers assembly convenience. The Long, Pilot Type is designed in such a way that the linear bushing does not protrude toward the opposite side of the linear bushing mount side, and retains a sufficient space on the opposite side.
Days to Ship: | Same day or more |
---|
Show Stock Products
Linear Ball Bushings - Bearing type, high block, double.
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Spec-designed to save the time of manufacturing a housing and installing a linear bushing, and to have a width (W Dim.) narrower than Wide Block.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
TYPE |
Motion |
Style |
Outer Cylinder Material |
Outer Cylinder Surface Finish |
For Shaft Size(mm) |
For Shaft Size(inch) |
Overall Length L(mm) |
Overall Length L(inch) |
Flange Type |
Lubrication Type |
O.D. D(mm) |
O.D. D(inch) |
Type |
Length |
Ball Recirculating Type |
Precision |
Eccentricity(µm) |
Brand | MISUMI | MISUMI | THK | MISUMI | MISUMI | THK | THK | MISUMI | THK | MISUMI | THK | THK | THK | THK | THK | MISUMI | THK | MISUMI | MISUMI | MISUMI | THK | MISUMI | THK | THK | MISUMI | MISUMI | THK | MISUMI | THK | THK | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | IKO | Thomson Linear | MISUMI | MISUMI | MISUMI | MISUMI | THK | Thomson Linear | MISUMI | MISUMI |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Linear Ball Bushings - With round flange, single. LMF Series. | Linear Ball Bushings - With square flange, single. LMK Series. | Linear Ball Bushings - With square flange, long. LMK-L Series. | Linear Ball Bushings - Linear/Rotating, single, no seals. ST, ST-B Series. | Linear Ball Bushings - Bearing type, wide block, long. SL Series. | Linear Ball Bushings - Linear/Rotating, single, with seals. Series ST-UU, ST-UUB. | Linear Ball Bushings - With round flange, long type. LMF-L Series. | Linear Ball Bushings - Single. LM-GA Series (With metal retainers). | Linear Ball Bushings - Single. LM-MG Series (Stainless Steel). | Linear Ball Bushings - Compact, single bearing type. SH series. | Linear Ball Bushings - Bearing type, wide block, with clamping lever. | Linear Ball Bushings - Bearing type, wide block, with MX lubrication unit. | Linear Ball Bushings - Bearing Type, Wide Block, Long/Extra Long. | Linear Ball Bushings - Center flange, double, special length. | Linear Ball Bushings - Bearing type, with single open bushing. Super Smart Series. | Linear Ball Bushings - Flanged, double, with MX lubrication unit. | Linear Ball Bushings - Bearing type, wide block, with Dowel pin holes. | Linear Ball Bushings - With central flange, double. LMC-L Series. | Linear Ball Bushings - Wide block bearing type, single, Super Smart bushing. | Linear Ball Bushings - Standard/pilot flanged, double, long type. | |||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Days to Ship |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
8 Days or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 11 Days or more | 16 Days | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 16 Days |
Same day or more
Show Stock Products | 8 Days or more |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||
TYPE | Straight | Flange | Flange | Flange | Housings | Flange | Straight | Straight | Flange | Flange | Flange | Straight | - | Flange | Straight | Flange | Straight | Flange | Flange | Straight | Straight | Straight | Flange | - | Flange | Flange | Straight | Standard Flange | Straight | - | Housings | Housings | Housings | Housings | Flange | Straight | Housings | Flange | Housings | Housings | Flange | - | Housings | Flange | Housings |
Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear/Rotary | Linear Motion | Linear Motion | Linear/Rotary | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear/Rotary | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | - | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion |
Style | Standard | Standard | - | Standard | Standard | - | Standard / Open | Standard | - | Standard | - | - | Standard | - | - | Standard | - | Standard | Standard | Standard | - | Standard | - | Standard | Standard | Standard | - | Standard | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Open | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
Outer Cylinder Material | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel | - | Steel / Stainless Steel | Steel | - | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel | Stainless Steel | Steel | Steel / Stainless Steel | Steel | Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | - | Steel | Steel / Stainless Steel | Steel | Steel | Steel | - | Steel / Stainless Steel | Steel |
Outer Cylinder Surface Finish | None / Plated | None / Plated | - | None / Plated | Plated | - | - | None | - | None / Plated | - | - | - | - | - | None / Plated | - | None / Plated | None / Plated | None | - | None | - | - | None / Plated | None / Plated | - | None | - | - | Plated | Plated | Plated | Plated | None | None | - | None / Plated | Plated | Plated | None / Plated | None | - | None / Plated | Plated |
For Shaft Size(mm) | 3 ~ 50 | 3 ~ 50 | 6 ~ 60 | 3 ~ 50 | 5 ~ 50 | 6 ~ 30 | 3 ~ 60 | 6 ~ 20 | 6 ~ 60 | 6 ~ 50 | 6 ~ 60 | 6 ~ 100 | 6 ~ 30 | 6 ~ 30 | 8 ~ 100 | 6 ~ 30 | 3 ~ 60 | 6 ~ 50 | 3 ~ 50 | 6 ~ 16 | 5 ~ 80 | 5 ~ 20 | 6 ~ 60 | 6 ~ 50 | 6 ~ 40 | 6 ~ 16 | 6 ~ 100 | 6 ~ 30 | 3 ~ 40 | 3 ~ 20 | 4 ~ 30 | 16 ~ 30 | 10 ~ 50 | 5 ~ 50 | 6 ~ 30 | 3 ~ 5 | 16 ~ 40 | 10 ~ 50 | 4 ~ 30 | 10 ~ 50 | 16 ~ 30 | 6 ~ 25 | 16 ~ 30 | 6 ~ 40 | 6 ~ 30 |
For Shaft Size(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Overall Length L(mm) | 10 ~ 192 | 10 ~ 100 | 17 ~ 110 | 19 ~ 192 | 18 ~ 110 | 35 ~ 123 | 10 ~ 110 | 16 ~ 35 | 17 ~ 110 | 35 ~ 192 | 35 ~ 211 | 19 ~ 100 | 48 ~ 140 | 19 ~ 64 | 24 ~ 100 | 29 ~ 90 | 19 ~ 211 | 19 ~ 100 | 35 ~ 192 | 19 ~ 70 | 22 ~ 165 | - | 35 ~ 211 | 25 ~ 110 | 49 ~ 230 | 19 ~ 37 | 17 ~ 175 | 19 ~ 64 | 10 ~ 80 | 13 ~ 44 | 27 ~ 138 | 59 ~ 158 | 45 ~ 243 | 33 ~ 215 | 29 ~ 90 | 10 ~ 15 | 43 ~ 91 | 65 ~ 220 | 15 ~ 74 | 35 ~ 310 | 37 ~ 123 | 35 ~ 112 | 43 ~ 79 | 49 ~ 230 | 37 ~ 202 |
Overall Length L(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Flange Type | - | Standard Flange | - | Standard Flange | - | Standard Flange | - | - | Standard Flange | Pilot Flanged | Standard Flange | - | - | Standard Flange | - | Standard Flange | - | Pilot Flanged | Standard Flange / Center Flanged | - | - | - | - | - | Pilot Flanged | Standard Flange | - | Standard Flange | - | - | - | - | - | - | Center Flanged | - | - | Standard Flange | - | - | Standard Flange | Center Flanged | - | Pilot Flanged | - |
Lubrication Type | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | Standard | Standard | - | Standard | Standard | Standard | Standard | Standard | Standard | - | Standard | Standard | Standard | Standard | Standard | Standard / Grease coating | Standard | Standard | Standard | Standard | With Lubrication Unit MX | Standard | Standard | Standard | Standard | With Lubrication Unit MX | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
O.D. D(mm) | 7 ~ 80 | 7 ~ 80 | 12 ~ 90 | 7 ~ 80 | 10 ~ 80 | 12 ~ 45 | 7 ~ 90 | 12 ~ 32 | 12 ~ 90 | 12 ~ 80 | 12 ~ 90 | 12 ~ 130 | - | 12 ~ 45 | 15 ~ 130 | 12 ~ 45 | 7 ~ 90 | 12 ~ 80 | 12 ~ 80 | 10 ~ 26 | 12 ~ 120 | - | 12 ~ 90 | - | 15 ~ 65 | 10 ~ 26 | 12 ~ 150 | 12 ~ 45 | 7 ~ 60 | - | 8 ~ 45 | 28 ~ 45 | 19 ~ 80 | 10 ~ 80 | 12 ~ 45 | 7 ~ 10 | - | 19 ~ 80 | 8 ~ 45 | 19 ~ 80 | 28 ~ 45 | 12 ~ 40 | - | 15 ~ 65 | 12 ~ 45 |
O.D. D(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Type | Standard | with End Flange | with End Flange | with End Flange | Pillow Blocks Wide Block Type | with End Flange | Standard / Open / Clearance Adjustment Type | Standard | with End Flange | - | with End Flange | Standard | Pillow Blocks Wide Block Type | with End Flange | Standard | with End Flange | Standard | with End Flange | - | Standard | Standard | - | with End Flange | Pillow Blocks Wide Block Type | - | with End Flange | Standard / Open / Clearance Adjustment Type | - | Standard | Housing Type | Housing Type | Pillow Blocks Wide Block Type | Pillow Blocks Wide Block Type | Pillow Blocks Wide Block Type | - | - | - | with End Flange | Housing Type | Pillow Blocks Wide Block Type | with End Flange | with Center Flange | - | with End Flange | Housing Type |
Length | Standard | Standard | Standard | - | Standard / Medium | Long | Standard | Short | Standard | - | Long | - | Long | Standard | - | - | Long | Standard | - | Standard | Standard | Standard / Double | Long | Standard | - | Standard | Standard | Standard | Standard | Standard | Double | Standard / Double | Standard / Double | Double / Medium Long / Long | - | Standard | Standard | - | Standard | Standard / Double / Long | Standard / Double | Long | Standard | - | Medium / Medium Long / Long |
Ball Recirculating Type | Single / Double | Single | Single | Double | Single / Double | Double | Single | Single | Single | Double | Double | - | Double | Single | - | Double | Double | Single | Double | Single / Double | Single | - | Double | Single | Double | Single | Single | Single | Single | Single | Double | Single / Double | Single / Double | Double | Double | Single | - | Double | Single | Single / Double | Single / Double | Double | - | Double | Double |
Precision | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade / Precision Grade | High Grade | High Grade | High Grade | High Grade | - | High Grade | High Grade | - | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | - | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | - | High Grade | High Grade | High Grade | High Grade | - | - | High Grade | High Grade |
Eccentricity(µm) | 8 ~ 25 | 8 ~ 20 | 12 ~ 25 | 10 ~ 25 | - | 15 ~ 20 | 4 ~ 25 | 12 ~ 15 | 12 ~ 25 | 15 ~ 25 | 15 ~ 25 | - | - | 12 ~ 15 | - | 15 ~ 20 | 10 ~ 25 | 12 ~ 20 | 15 ~ 25 | 12 ~ 15 | 12 ~ 20 | - | 15 ~ 25 | - | 20 ~ 30 | 12 | 12 ~ 30 | 12 ~ 15 | 8 ~ 20 | - | - | - | - | - | 15 ~ 20 | 4 | - | 15 ~ 25 | - | - | 12 ~ 20 | 12 ~ 15 | - | 20 ~ 30 | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy