While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

MISUMI Square End Mills (Carbide)

74 items

: 30; 45; 60

Days to Ship	All Same day 5 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less 14 Days or Less 16 Days or Less

VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Effective for processing deep parts due to extra long blade length
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Spec Expansion

Price Reduction
Days to Ship: 8 Days or more
Carbide Square End Mill, 2-Flute/0.01mm Designation Model

MISUMI

Blade diameter can be selected from extensive lineup of flute lengths in 0.01 mm increments

Volume Discount

Non-Coated

General Steel

2 Flutes
Days to Ship: 9 Days or more
XAL Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model

MISUMI

The price of the low-cost classic XAL Series has been further reduced. [C-Value]

Volume Discount

XAL

General Steel

2 Flutes
Days to Ship: 8 Days or more
XAL Series Carbide Square End Mill, 2-Flute/3D Flute Length Model

MISUMI

Misumi's unique lineup of fine blade length is available at attractive low prices [C-Value]

Volume Discount

XAL

General Steel

2 Flutes
Days to Ship: 8 Days or more
XAL Series Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model

MISUMI

Popular XAL Series with the 4-blade structure that's ideal for side milling has been further reduced in price. [C-Value]

Volume Discount

XAL

General Steel

4 Flutes
Days to Ship: Same day or more

Show Stock Products
TSC Series Carbide Square End Mill, 2-Flute/2.5D Flute Length Model

MISUMI

The lineup of fine intermediate blade length between short and regular is available only in Misumi

Volume Discount

TS

General Steel

2 Flutes

SR
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 4-Flute/1.5D Flute Length (Stub) Model

MISUMI

Also exerts effectiveness in high-speed machining

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model

MISUMI

26 Sizes of Standard Blade Length

Volume Discount

TS

General Steel

4 Flutes

S (Short)
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model

MISUMI

Compatible with deeper side milling

Volume Discount

TS

General Steel

4 Flutes

L (Long)
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill for Countersink, 3-Flute/Short Model

MISUMI

A low blade flat type with the blade shape that's ideal for counter boring

Volume Discount

Price Reduction

TS

General Steel

3 Flutes

S (Short)
Days to Ship: 8 Days or more
Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model

MISUMI

The 3D blade length type that's capable of sophisticated grooving is also known for the producing the high-quality finish

Volume Discount

Non-Coated

General Steel

4 Flutes

R (Regular)
Days to Ship: 8 Days or more
Carbide Square End Mill for Aluminum Machining, 2-Flute/Extra Long Model

MISUMI

Achieves the standing-wall machining of aluminum in the first shot. Blade length is 5 times the blade diameter

Volume Discount

Non-Coated

Aluminum

2 Flutes

EXL (Extra Long)
Days to Ship: 8 Days or more
Carbide Square End Mill for Aluminum Machining, 3-Flute/3D Flute Length (Regular) Model

MISUMI

Achieves high-efficiency machining with the 3-geometry that's emphasized the rigidity.

Volume Discount

Non-Coated

Aluminum

3 Flutes

R (Regular)
Days to Ship: 8 Days or more
CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute/Regular Model

MISUMI

The CrN coating with excellent lubricity exhibits power in copper electrode processing

Volume Discount

CrN

Copper

2 Flutes

R (Regular)
Days to Ship: 8 Days or more
Carbide Square End Mill for Resin Machining, 2-Flute/Regular, Long Shank Model

MISUMI

Available in 10 sizes including the long shank type

Volume Discount

Non-Coated

Resin

2 Flutes

R (Regular)
Days to Ship: 8 Days or more
XAL Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model

MISUMI

A long blade length type that is compatible with deep engraving [C-Value]

Volume Discount

XAL

General Steel

2 Flutes
Days to Ship: 8 Days or more
New Products
Carbide Square End Mill for Aluminum Machining, 2-Flute/5D Flute Length (Extra Long) Model

MISUMI

Perform one-shot standing-wall machining at high surface accuracy. Now offering a flute length of 5 times the outer diameter at ultra-low price (C-Value)

Volume Discount

Non-Coated

Aluminum

2 Flutes
Days to Ship: 8 Days or more
XAL Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model

MISUMI

The Misumi's original fine intermediate blade length is available at a reasonable price[C-Value]

Volume Discount

XAL

General Steel

4 Flutes
Days to Ship: 8 Days or more
XAC Series Carbide Square End Mill, 2-Flute/Short Model

MISUMI

Standard TiAlN coat [C-Value] series

Volume Discount

TiAlN

General Steel

2 Flutes

S (Short)
Days to Ship: 8 Days or more
XAC Series Carbide Square End Mill, 4-Flute/Short Model

MISUMI

Standard TiAlN coat [C-Value] series

Volume Discount

TiAlN

General Steel

4 Flutes

S (Short)
Days to Ship: 8 Days or more
XAC Series Carbide Square End Mill, 4-Flute/Long Model

MISUMI

User friendly TiAlN coated series with long blade length [C-Value]

Volume Discount

TiAlN

General Steel

4 Flutes

L (Long)
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill for Shrinkage Fitting, 2-Flute/1D Flute Length (Stub) Model

MISUMI

In addition to the stock items, the outer diameter can be specified in 0.01 mm increments through additional processing

Volume Discount

TS

General Steel

2 Flutes

B (Stub)
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model

MISUMI

A short blade length (stub) series that's ideal for high-speed machining

Volume Discount

TS

General Steel

2 Flutes

B (Stub)
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model

MISUMI

In addition to the stock items, the outer diameter can be specified in 0.01 mm increments through additional processing

Volume Discount

TS

General Steel

2 Flutes

S (Short)
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model

MISUMI

2-blade regular size that can be used in a wide range of applications

Volume Discount

TS

General Steel

2 Flutes

R (Regular)
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 2-Flute/3.5D Flute Length Model

MISUMI

Lineups of fine intermediate blade length between regular and long are available only in MISUMI.

Volume Discount

TS

General Steel

2 Flutes

RL
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model

MISUMI

Compatible with Deep Engraving.

Volume Discount

TS

General Steel

2 Flutes

L (Long)
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill for Shrinkage Fitting, 4-Flute/1D Flute Length (Stub) Model

MISUMI

Shrink-Fit Chuck Supported Type

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 4-Flute/2.5D Flute Length Model

MISUMI

The fine intermediate blade length between short and regular that's unique to Misumi

Volume Discount

TS

General Steel

4 Flutes

SR
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model

MISUMI

A standard regular size with high versatility

Volume Discount

TS

General Steel

4 Flutes

R (Regular)
Days to Ship: Same day or more

Show Stock Products
TSC Series Carbide Square End Mill, 4-Flute/3.5D Flute Length Model

MISUMI

The fine intermediate blade length between regular and long that's unique to Misumi

Volume Discount

TS

General Steel

4 Flutes

RL
Days to Ship: 8 Days or more
TSC Series Carbide End Mill for Key Grooves, 2-Flute/Short Model

MISUMI

The standard key grooving end mills that are sorted by tolerance have been significantly reduced in price

Volume Discount

Price Reduction

TS

General Steel

2 Flutes

S (Short)
Days to Ship: 8 Days or more
Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model

MISUMI

Excellent in general versatility, it is a 2D blade length type that can be used in a wide range of applications

Volume Discount

Non-Coated

General Steel

2 Flutes

S (Short)
Days to Ship: 8 Days or more
Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model

MISUMI

The 3D blade length type that produces a high-quality finish compatible with a wide range of machining areas

Volume Discount

Non-Coated

General Steel

2 Flutes

R (Regular)
Days to Ship: 8 Days or more
Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model

MISUMI

The 2D blade length type with high versatility achieves high-precision processing including grooving

Volume Discount

Non-Coated

General Steel

4 Flutes

S (Short)
Days to Ship: 8 Days or more
Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model

MISUMI

Achieves both high levels of machining precision and reduction of processing time in side milling

Volume Discount

Non-Coated

General Steel

4 Flutes

L (Long)
Days to Ship: 8 Days or more
TSC Series Carbide Roughing End Mill for Stainless Steel Machining

MISUMI

Ideal for the medium-finishing of difficult-to-cut SUS, etc.

Volume Discount

TS

SUS

3 Flutes

R (Regular)
Days to Ship: 8 Days or more
TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral/Short Model

MISUMI

An end mill for titanium machining that performs medium roughing and finish machining at the same time

Volume Discount

TS

Titanium

4 Flutes

S (Short)
Days to Ship: 8 Days or more
Diamond Coated Carbide Square End Mill for Aluminum Machining, 2-Flute/Regular Model

MISUMI

Demonstrates the tremendous durability and finishing precision in aluminum machining [C-Value]

Volume Discount

DIA

Aluminum

2 Flutes

R (Regular)
Days to Ship: 8 Days or more
Diamond Coated Carbide Square End Mill for Aluminum Machining, 3-Flute/Regular Model

MISUMI

Demonstrates the tremendous durability and finishing precision in aluminum machining [C-Value]

Volume Discount

DIA

Aluminum

3 Flutes

R (Regular)
Days to Ship: 8 Days or more
DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute/2D Flute Length (Short) Model

MISUMI

Short blade length that suppresses chattering

Volume Discount

DLC

Aluminum

2 Flutes

S (Short)
Days to Ship: 8 Days or more
DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute/3D Flute Length (Regular) Model

MISUMI

The cutting performance of aluminum has been improved by the combination of sharp edge and DLC coating

Volume Discount

DLC

Aluminum

2 Flutes

R (Regular)
Days to Ship: 8 Days or more
DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute/4D Flute Length (Long) Model

MISUMI

4D blade length type that's ideal for deep engraving

Volume Discount

DLC

Aluminum

2 Flutes

L (Long)
Days to Ship: 8 Days or more
DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute/3D Flute Length (Regular) Model

MISUMI

The unique tip pocket shape improves the discharging of chips

Volume Discount

DLC

Aluminum

3 Flutes

R (Regular)
Days to Ship: 8 Days or more
DLC Coated Carbide Square End Mill for Aluminum Machining, 4-Flute/Regular Model

MISUMI

The durability is enhanced with the adoption of the 4-geometry

Volume Discount

DLC

Aluminum

4 Flutes

R (Regular)
Days to Ship: 8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	9 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	Same day or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	Same day or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more


Brand
Product Series
Days to Ship
Specifications
Flute Diameter (D)(φ)
Work Material
Flute Length (ℓ)(mm)
Number of Flutes(sheet)
Model
Coating
Link Diameter (d)(mm)
Overall Length (L)(mm)
Length Under Neck (ℓ1)(mm)
Processing Applications
Flute Shape
Helix Angle (θ)

	Spec Expansion Price Reduction									Price Reduction							New Products															Price Reduction
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)	Carbide Square End Mill, 2-Flute/0.01mm Designation Model	XAL Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model	XAL Series Carbide Square End Mill, 2-Flute/3D Flute Length Model	XAL Series Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model	TSC Series Carbide Square End Mill, 2-Flute/2.5D Flute Length Model	TSC Series Carbide Square End Mill, 4-Flute/1.5D Flute Length (Stub) Model	TSC Series Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model	TSC Series Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model	TSC Series Carbide Radius End Mill for Countersink, 3-Flute/Short Model	Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model	Carbide Square End Mill for Aluminum Machining, 2-Flute/Extra Long Model	Carbide Square End Mill for Aluminum Machining, 3-Flute/3D Flute Length (Regular) Model	CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute/Regular Model	Carbide Square End Mill for Resin Machining, 2-Flute/Regular, Long Shank Model	XAL Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model	Carbide Square End Mill for Aluminum Machining, 2-Flute/5D Flute Length (Extra Long) Model	XAL Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model	XAC Series Carbide Square End Mill, 2-Flute/Short Model	XAC Series Carbide Square End Mill, 4-Flute/Short Model	XAC Series Carbide Square End Mill, 4-Flute/Long Model	TSC Series Carbide Square End Mill for Shrinkage Fitting, 2-Flute/1D Flute Length (Stub) Model	TSC Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model	TSC Series Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model	TSC Series Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model	TSC Series Carbide Square End Mill, 2-Flute/3.5D Flute Length Model	TSC Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model	TSC Series Carbide Square End Mill for Shrinkage Fitting, 4-Flute/1D Flute Length (Stub) Model	TSC Series Carbide Square End Mill, 4-Flute/2.5D Flute Length Model	TSC Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model	TSC Series Carbide Square End Mill, 4-Flute/3.5D Flute Length Model	TSC Series Carbide End Mill for Key Grooves, 2-Flute/Short Model	Carbide Square End Mill, 2-Flute/2D Flute Length (Short) Model	Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model	Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model	Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model	TSC Series Carbide Roughing End Mill for Stainless Steel Machining	TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral/Short Model	Diamond Coated Carbide Square End Mill for Aluminum Machining, 2-Flute/Regular Model	Diamond Coated Carbide Square End Mill for Aluminum Machining, 3-Flute/Regular Model	DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute/2D Flute Length (Short) Model	DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute/3D Flute Length (Regular) Model	DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute/4D Flute Length (Long) Model	DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute/3D Flute Length (Regular) Model	DLC Coated Carbide Square End Mill for Aluminum Machining, 4-Flute/Regular Model
Days to Ship	8 Days or more	9 Days or more	8 Days or more	8 Days or more	Same day or more Show Stock Products	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	Same day or more Show Stock Products	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more
Specifications		Non-Coated General Steel 2 Flutes	XAL General Steel 2 Flutes	XAL General Steel 2 Flutes	XAL General Steel 4 Flutes	TS General Steel 2 Flutes SR	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes L (Long)	TS General Steel 3 Flutes S (Short)	Non-Coated General Steel 4 Flutes R (Regular)	Non-Coated Aluminum 2 Flutes EXL (Extra Long)	Non-Coated Aluminum 3 Flutes R (Regular)	CrN Copper 2 Flutes R (Regular)	Non-Coated Resin 2 Flutes R (Regular)	XAL General Steel 2 Flutes	Non-Coated Aluminum 2 Flutes	XAL General Steel 4 Flutes	TiAlN General Steel 2 Flutes S (Short)	TiAlN General Steel 4 Flutes S (Short)	TiAlN General Steel 4 Flutes L (Long)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes R (Regular)	TS General Steel 2 Flutes RL	TS General Steel 2 Flutes L (Long)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes SR	TS General Steel 4 Flutes R (Regular)	TS General Steel 4 Flutes RL	TS General Steel 2 Flutes S (Short)	Non-Coated General Steel 2 Flutes S (Short)	Non-Coated General Steel 2 Flutes R (Regular)	Non-Coated General Steel 4 Flutes S (Short)	Non-Coated General Steel 4 Flutes L (Long)	TS SUS 3 Flutes R (Regular)	TS Titanium 4 Flutes S (Short)	DIA Aluminum 2 Flutes R (Regular)	DIA Aluminum 3 Flutes R (Regular)	DLC Aluminum 2 Flutes S (Short)	DLC Aluminum 2 Flutes R (Regular)	DLC Aluminum 2 Flutes L (Long)	DLC Aluminum 3 Flutes R (Regular)	DLC Aluminum 4 Flutes R (Regular)
Flute Diameter (D)(φ)	1.5 ～ 25	3.15 ～ 19.99	0.1 ～ 20	0.1 ～ 20	1 ～ 20	0.5 ～ 12	2 ～ 12	1 ～ 20	1 ～ 12	3 ～ 16	2 ～ 20	3 ～ 12	0.5 ～ 20	0.5 ～ 12	1 ～ 10	0.5 ～ 12	3 ～ 12	1 ～ 20	1 ～ 20	2 ～ 20	3 ～ 12	0.5 ～ 12	0.5 ～ 20	0.1 ～ 20	0.2 ～ 20	0.5 ～ 12	1 ～ 12	2 ～ 12	1 ～ 16	1 ～ 20	1 ～ 16	2 ～ 14	0.2 ～ 12	0.2 ～ 12	1 ～ 20	1 ～ 12	6 ～ 20	6 ～ 20	1 ～ 12	1 ～ 12	1 ～ 20	0.5 ～ 20	3 ～ 12	0.5 ～ 20	0.5 ～ 12
Work Material	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[○] / Copper[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	General Steel[○] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]
Flute Length (ℓ)(mm)	6 ～ 120	3.5 ～ 48	0.2 ～ 40	0.3 ～ 60	2 ～ 40	1.25 ～ 30	3 ～ 18	2 ～ 40	4 ～ 48	8 ～ 32	5 ～ 60	15 ～ 60	1.5 ～ 60	1.5 ～ 36	3 ～ 20	2 ～ 48	15 ～ 60	3 ～ 60	2.5 ～ 38	6 ～ 38	12 ～ 30	0.5 ～ 12	0.75 ～ 30	0.2 ～ 40	0.6 ～ 60	1.75 ～ 42	4 ～ 48	2 ～ 12	2.5 ～ 40	3 ～ 60	3.5 ～ 56	3 ～ 21	0.4 ～ 24	0.6 ～ 36	2 ～ 40	4 ～ 48	15 ～ 50	14 ～ 42	3 ～ 36	3 ～ 36	2 ～ 40	1.5 ～ 60	5 ～ 48	1.5 ～ 60	1.5 ～ 28
Number of Flutes(sheet)	4	2	2	2	4	2	4	4	4	3	4	2	3	2	2	2	2	4	2	4	4	2	2	2	2	2	2	4	4	4	4	2	2	2	4	4	3	4	2	3	2	2	2	3	4
Model	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Roughing	Square	Square	Square	Square	Square	Square	Square	Square
Coating	-	Non-Coated	For General Steel (AlCrN etc.)	For General Steel (AlCrN etc.)	For General Steel (AlCrN etc.)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	Non-Coated	Non-Coated	Non-Coated	CrN	Non-Coated	For General Steel (AlCrN etc.)	Non-Coated	For General Steel (AlCrN etc.)	TiAlN	TiAlN	TiAlN	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	Non-Coated	Non-Coated	Non-Coated	Non-Coated	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	Diamond Coat	Diamond Coat	DLC	DLC	DLC	DLC	DLC
Link Diameter (d)(mm)	4 ～ 25	6 ～ 20	3 ～ 20	3 ～ 20	4 ～ 20	4 ～ 12	4 ～ 12	4 ～ 20	4 ～ 12	6 ～ 16	4 ～ 20	6 ～ 12	4 ～ 20	4 ～ 12	1 ～ 10	4 ～ 12	6 ～ 12	4 ～ 20	4 ～ 20	4 ～ 20	6 ～ 12	4 ～ 12	4 ～ 20	3 ～ 20	3 ～ 20	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 16	4 ～ 20	6 ～ 16	6 ～ 16	3 ～ 12	3 ～ 12	4 ～ 20	4 ～ 12	6 ～ 20	6 ～ 20	4 ～ 12	4 ～ 12	4 ～ 20	4 ～ 20	6 ～ 12	4 ～ 20	4 ～ 12
Overall Length (L)(mm)	60 ～ 250	40 ～ 105	40 ～ 110	40 ～ 110	40 ～ 110	45 ～ 85	40 ～ 75	40 ～ 110	45 ～ 100	50 ～ 110	45 ～ 130	60 ～ 130	40 ～ 130	50 ～ 90	65 ～ 180	45 ～ 100	60 ～ 130	45 ～ 130	40 ～ 105	40 ～ 105	50 ～ 90	40 ～ 65	40 ～ 105	35 ～ 110	40 ～ 130	45 ～ 95	45 ～ 100	40 ～ 65	45 ～ 105	45 ～ 130	45 ～ 120	45 ～ 75	35 ～ 75	40 ～ 85	40 ～ 110	45 ～ 100	60 ～ 130	60 ～ 120	40 ～ 80	40 ～ 80	40 ～ 110	40 ～ 130	60 ～ 100	40 ～ 130	40 ～ 80
Length Under Neck (ℓ1)(mm)	-	-	-	-	-	20 ～ 55	-	15 ～ 73	29 ～ 70	-	23 ～ 92	-	23 ～ 92	-	-	-	-	-	-	-	-	-	-	17 ～ 73	23 ～ 92	26 ～ 65	29 ～ 76	-	20 ～ 73	23 ～ 92	26 ～ 88	-	17 ～ 45	23 ～ 55	17 ～ 73	29 ～ 70	-	-	-	-	17 ～ 73	23 ～ 92	29 ～ 70	23 ～ 92	22 ～ 50
Processing Applications	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Flat Surface / Side Surface / Inclined Cutting
Flute Shape	-	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner	Sharp Corner / With Lead	Sharp Corner	With Lead	Sharp Corner	Sharp Corner	Sharp Corner / With Lead	-	Sharp Corner / With Lead	Sharp Corner	Sharp Corner	Sharp Corner	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	Sharp Corner / With Lead	C Surface	C Surface	Sharp Corner	With Lead	Sharp Corner	Sharp Corner	Sharp Corner	With Lead	Sharp Corner
Helix Angle (θ)	-	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Weak Helix (15 to 25°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Powerful Helix (45° to 60°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Weak Helix (15 to 25°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)

Configure

Stock

- Show Stock Products
Clear

Specification/Dimensions

Metric / Inch
- metric
Clear

Flute Diameter (D)(φ)
- 0.01～0.99
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.09
  - 0.1
  - 0.11
  - 0.12
  - 0.13
  - 0.14
  - 0.15
  - 0.16
  - 0.17
  - 0.18
  - 0.19
  - 0.2
  - 0.21
  - 0.22
  - 0.23
  - 0.24
  - 0.25
  - 0.26
  - 0.27
  - 0.28
  - 0.29
  - 0.3
  - 0.31
  - 0.32
  - 0.33
  - 0.34
  - 0.35
  - 0.36
  - 0.37
  - 0.38
  - 0.39
  - 0.4
  - 0.41
  - 0.42
  - 0.43
  - 0.44
  - 0.45
  - 0.46
  - 0.47
  - 0.48
  - 0.49
  - 0.5
  - 0.51
  - 0.52
  - 0.53
  - 0.54
  - 0.55
  - 0.56
  - 0.57
  - 0.58
  - 0.59
  - 0.6
  - 0.61
  - 0.62
  - 0.63
  - 0.64
  - 0.65
  - 0.66
  - 0.67
  - 0.68
  - 0.69
  - 0.7
  - 0.71
  - 0.72
  - 0.73
  - 0.74
  - 0.75
  - 0.76
  - 0.77
  - 0.78
  - 0.79
  - 0.8
  - 0.81
  - 0.82
  - 0.83
  - 0.84
  - 0.85
  - 0.86
  - 0.87
  - 0.88
  - 0.89
  - 0.9
  - 0.91
  - 0.92
  - 0.93
  - 0.94
  - 0.95
  - 0.96
  - 0.97
  - 0.98
  - 0.99
- 1～1.99
  - 1
  - 1.01
  - 1.02
  - 1.03
  - 1.04
  - 1.05
  - 1.06
  - 1.07
  - 1.08
  - 1.09
  - 1.1
  - 1.11
  - 1.12
  - 1.13
  - 1.14
  - 1.15
  - 1.16
  - 1.17
  - 1.18
  - 1.19
  - 1.2
  - 1.21
  - 1.22
  - 1.23
  - 1.24
  - 1.25
  - 1.26
  - 1.27
  - 1.28
  - 1.29
  - 1.3
  - 1.31
  - 1.32
  - 1.33
  - 1.34
  - 1.35
  - 1.36
  - 1.37
  - 1.38
  - 1.39
  - 1.4
  - 1.41
  - 1.42
  - 1.43
  - 1.44
  - 1.45
  - 1.46
  - 1.47
  - 1.48
  - 1.49
  - 1.5
  - 1.51
  - 1.52
  - 1.53
  - 1.54
  - 1.55
  - 1.56
  - 1.57
  - 1.58
  - 1.59
  - 1.6
  - 1.61
  - 1.62
  - 1.63
  - 1.64
  - 1.65
  - 1.66
  - 1.67
  - 1.68
  - 1.69
  - 1.7
  - 1.71
  - 1.72
  - 1.73
  - 1.74
  - 1.75
  - 1.76
  - 1.77
  - 1.78
  - 1.79
  - 1.8
  - 1.81
  - 1.82
  - 1.83
  - 1.84
  - 1.85
  - 1.86
  - 1.87
  - 1.88
  - 1.89
  - 1.9
  - 1.91
  - 1.92
  - 1.93
  - 1.94
  - 1.95
  - 1.96
  - 1.97
  - 1.98
  - 1.99
- 2～2.99
  - 2
  - 2.01
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.39
  - 2.4
  - 2.41
  - 2.42
  - 2.43
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.49
  - 2.5
  - 2.51
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.62
  - 2.63
  - 2.64
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.71
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.92
  - 2.93
  - 2.94
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.84
  - 4.85
  - 4.86
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.56
  - 5.57
  - 5.58
  - 5.59
  - 5.6
  - 5.61
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.99
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.1
  - 7.11
  - 7.12
  - 7.13
  - 7.14
  - 7.15
  - 7.16
  - 7.17
  - 7.18
  - 7.19
  - 7.2
  - 7.21
  - 7.22
  - 7.23
  - 7.24
  - 7.25
  - 7.26
  - 7.27
  - 7.28
  - 7.29
  - 7.3
  - 7.31
  - 7.32
  - 7.33
  - 7.34
  - 7.35
  - 7.36
  - 7.37
  - 7.38
  - 7.39
  - 7.4
  - 7.41
  - 7.42
  - 7.43
  - 7.44
  - 7.45
  - 7.46
  - 7.47
  - 7.48
  - 7.49
  - 7.5
  - 7.51
  - 7.52
  - 7.53
  - 7.54
  - 7.55
  - 7.56
  - 7.57
  - 7.58
  - 7.59
  - 7.6
  - 7.61
  - 7.62
  - 7.63
  - 7.64
  - 7.65
  - 7.66
  - 7.67
  - 7.68
  - 7.69
  - 7.7
  - 7.71
  - 7.72
  - 7.73
  - 7.74
  - 7.75
  - 7.76
  - 7.77
  - 7.78
  - 7.79
  - 7.8
  - 7.81
  - 7.82
  - 7.83
  - 7.84
  - 7.85
  - 7.86
  - 7.87
  - 7.88
  - 7.89
  - 7.9
  - 7.91
  - 7.92
  - 7.93
  - 7.94
  - 7.95
  - 7.96
  - 7.97
  - 7.98
  - 7.99
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.99
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.1
  - 9.11
  - 9.12
  - 9.13
  - 9.14
  - 9.15
  - 9.16
  - 9.17
  - 9.18
  - 9.19
  - 9.2
  - 9.21
  - 9.22
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.27
  - 9.28
  - 9.29
  - 9.3
  - 9.31
  - 9.32
  - 9.33
  - 9.34
  - 9.35
  - 9.36
  - 9.37
  - 9.38
  - 9.39
  - 9.4
  - 9.41
  - 9.42
  - 9.43
  - 9.44
  - 9.45
  - 9.46
  - 9.47
  - 9.48
  - 9.49
  - 9.5
  - 9.51
  - 9.52
  - 9.53
  - 9.54
  - 9.55
  - 9.56
  - 9.57
  - 9.58
  - 9.59
  - 9.6
  - 9.61
  - 9.62
  - 9.63
  - 9.64
  - 9.65
  - 9.66
  - 9.67
  - 9.68
  - 9.69
  - 9.7
  - 9.71
  - 9.72
  - 9.73
  - 9.74
  - 9.75
  - 9.76
  - 9.77
  - 9.78
  - 9.79
  - 9.8
  - 9.81
  - 9.82
  - 9.83
  - 9.84
  - 9.85
  - 9.86
  - 9.87
  - 9.88
  - 9.89
  - 9.9
  - 9.91
  - 9.92
  - 9.93
  - 9.94
  - 9.95
  - 9.96
  - 9.97
  - 9.98
  - 9.99
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.99
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.12
  - 11.13
  - 11.14
  - 11.15
  - 11.16
  - 11.17
  - 11.18
  - 11.19
  - 11.2
  - 11.21
  - 11.22
  - 11.23
  - 11.24
  - 11.25
  - 11.26
  - 11.27
  - 11.28
  - 11.29
  - 11.3
  - 11.31
  - 11.32
  - 11.33
  - 11.34
  - 11.35
  - 11.36
  - 11.37
  - 11.38
  - 11.39
  - 11.4
  - 11.41
  - 11.42
  - 11.43
  - 11.44
  - 11.45
  - 11.46
  - 11.47
  - 11.48
  - 11.49
  - 11.5
  - 11.51
  - 11.52
  - 11.53
  - 11.54
  - 11.55
  - 11.56
  - 11.57
  - 11.58
  - 11.59
  - 11.6
  - 11.61
  - 11.62
  - 11.63
  - 11.64
  - 11.65
  - 11.66
  - 11.67
  - 11.68
  - 11.69
  - 11.7
  - 11.71
  - 11.72
  - 11.73
  - 11.74
  - 11.75
  - 11.76
  - 11.77
  - 11.78
  - 11.79
  - 11.8
  - 11.81
  - 11.82
  - 11.83
  - 11.84
  - 11.85
  - 11.86
  - 11.87
  - 11.88
  - 11.89
  - 11.9
  - 11.91
  - 11.92
  - 11.93
  - 11.94
  - 11.95
  - 11.96
  - 11.97
  - 11.98
  - 11.99
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.99
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.51
  - 15.52
  - 15.53
  - 15.54
  - 15.55
  - 15.56
  - 15.57
  - 15.58
  - 15.59
  - 15.6
  - 15.61
  - 15.62
  - 15.63
  - 15.64
  - 15.65
  - 15.66
  - 15.67
  - 15.68
  - 15.69
  - 15.7
  - 15.71
  - 15.72
  - 15.73
  - 15.74
  - 15.75
  - 15.76
  - 15.77
  - 15.78
  - 15.79
  - 15.8
  - 15.81
  - 15.82
  - 15.83
  - 15.84
  - 15.85
  - 15.86
  - 15.87
  - 15.88
  - 15.89
  - 15.9
  - 15.91
  - 15.92
  - 15.93
  - 15.94
  - 15.95
  - 15.96
  - 15.97
  - 15.98
  - 15.99
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.99
  - 19
  - 19..5
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.51
  - 19.52
  - 19.53
  - 19.54
  - 19.55
  - 19.56
  - 19.57
  - 19.58
  - 19.59
  - 19.6
  - 19.61
  - 19.62
  - 19.63
  - 19.64
  - 19.65
  - 19.66
  - 19.67
  - 19.68
  - 19.69
  - 19.7
  - 19.71
  - 19.72
  - 19.73
  - 19.74
  - 19.75
  - 19.76
  - 19.77
  - 19.78
  - 19.79
  - 19.8
  - 19.81
  - 19.82
  - 19.83
  - 19.84
  - 19.85
  - 19.86
  - 19.87
  - 19.88
  - 19.89
  - 19.9
  - 19.91
  - 19.92
  - 19.93
  - 19.94
  - 19.95
  - 19.96
  - 19.97
  - 19.98
  - 19.99
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5
  - 24
  - 24.5
- 25～25.5
  - 25
  - 25.5
- 26～26.5
  - 26
  - 26.5
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
Drawing

Clear

Work Material
- General Steel
- Heat-Treated Steel
- High-Hardness Steel ~ HRC55
- High-Hardness Steel – HRC60
- High-Hardness Steel – HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Flute Length (ℓ)(mm)
- 0.01～0.9
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.045
  - 0.05
  - 0.06
  - 0.07
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.105
  - 0.12
  - 0.135
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.25
  - 0.3
  - 0.32
  - 0.4
  - 0.45
  - 0.5
  - 0.6
  - 0.7
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.25
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.8
  - 12.9
- 13～13.8
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.8
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.6
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
- 18～18.8
  - 18
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.8
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.6
  - 19.8
- 20～20.8
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.7
  - 20.8
- 21～21.9
  - 21
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.8
  - 21.9
- 22～22.8
  - 22
  - 22.2
  - 22.4
  - 22.5
  - 22.6
  - 22.8
- 23～23.8
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.8
- 24～24.9
  - 24
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.8
  - 24.9
- 25～25.8
  - 25
  - 25.2
  - 25.5
  - 25.6
  - 25.8
- 26～26.8
  - 26
  - 26.4
  - 26.5
  - 26.7
  - 26.8
- 27～27.9
  - 27
  - 27.2
  - 27.3
  - 27.5
  - 27.6
  - 27.9
- 28～28.8
  - 28
  - 28.2
  - 28.4
  - 28.5
  - 28.8
- 29～29.7
  - 29
  - 29.1
  - 29.2
  - 29.5
  - 29.6
  - 29.7
- 30～30.9
  - 30
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.8
  - 30.9
- 31～31.8
  - 31
  - 31.2
  - 31.5
  - 31.6
  - 31.8
- 32～32.8
  - 32
  - 32.1
  - 32.4
  - 32.5
  - 32.7
  - 32.8
- 33～33.9
  - 33
  - 33.2
  - 33.3
  - 33.6
  - 33.9
- 34～34.8
  - 34
  - 34.2
  - 34.4
  - 34.5
  - 34.8
- 35～35.7
  - 35
  - 35.1
  - 35.2
  - 35.4
  - 35.5
  - 35.6
  - 35.7
- 36～36.8
  - 36
  - 36.4
  - 36.5
  - 36.8
- 37～37.6
  - 37
  - 37.2
  - 37.5
  - 37.6
- 38～38.8
  - 38
  - 38.4
  - 38.5
  - 38.8
- 39～39.6
  - 39
  - 39.2
  - 39.5
  - 39.6
- 40～40.8
  - 40
  - 40.4
  - 40.5
  - 40.8
- 41～41.6
  - 41
  - 41.2
  - 41.5
  - 41.6
- 42～42.8
  - 42
  - 42.4
  - 42.5
  - 42.8
- 43～43.6
  - 43
  - 43.2
  - 43.5
  - 43.6
- 44～44.8
  - 44
  - 44.4
  - 44.5
  - 44.8
- 45～45.5
  - 45
  - 45.2
  - 45.5
- 46～46.8
  - 46
  - 46.4
  - 46.5
  - 46.8
- 47～47.6
  - 47
  - 47.2
  - 47.5
  - 47.6
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.5
  - 50
  - 50.5
- 51～51.5
  - 51
  - 51.5
- 52
- 53～53.5
  - 53
  - 53.5
- 54～54.5
  - 54
  - 54.5
- 55～55.5
  - 55
  - 55.5
- 56
- 57.5
- 58～58.5
  - 58
  - 58.5
- 59～59.5
  - 59
  - 59.5
- 60
- 63
- 64
- 65
- 67
- 70
- 75
- 80
- 83
- 85
- 90
- 95
- 100
- 103
- 106
- 110
- 112
- 120
- 130
- 150
- 200
[4-60/1mm Unit(s)]

Drawing

Clear

Number of Flutes(sheet)
1

2

3

4

5

6

8

10

12

14
Clear

Model
- Square
- Roughing
- Long Neck Square
- Highly-Helical
Clear

Coating
- For High Hardness (Silicone-Based)
- TiAlN
- For General Steel (AlCrN etc.)
- TiCN
- DLC
- CrN
- Diamond Coat
- Non-Coated
- DG
Details

Clear

Link Diameter (d)(mm)
1

1.5

2

3

3.175

4

5

6

6.35

7

8

9

10

11

12

13

14

15

16

17

18

20

25

30

32

42
Drawing

Clear

Overall Length (L)(mm)
35

36

37

38

38.1

39

40

42

43

45

48

49

50

51

52

53

54

55

57

58

60

62

63

63.5

65

66

68

70

72

73

74

75

76

80

82

83

84

85

86

87

88

89

90

92

93

95

97

100

104

105

107

108

109

110

111

113

115

118

120

121

123

125

126

128

130

135

140

145

150

155

160

165

170

175

180

190

200

210

220

225

230

240

250

260

270

280

300

310

320

350
Drawing

Clear

Length Under Neck (ℓ1)(mm)
- 0.1～0.8
  - 0.1
  - 0.2
  - 0.3
  - 0.4
  - 0.5
  - 0.6
  - 0.75
  - 0.8
- 1～1.8
  - 1
  - 1.2
  - 1.25
  - 1.5
  - 1.6
  - 1.8
- 2～2.5
  - 2
  - 2.4
  - 2.5
- 3～3.8
  - 3
  - 3.2
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.5
- 5
- 6
- 7.5
- 8
- 9
- 10～10.5
  - 10
  - 10.5
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14
- 15
- 16～16.5
  - 16
  - 16.5
- 18
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 60
- 62
- 64
- 65
- 66
- 70
- 74
- 76
- 79
- 80
- 82
- 85
- 94
- 100
- 120
- 125
- 130
- 150
- 200
[15-92/1mm Unit(s)]

Drawing

Clear

Processing Applications
Images

Clear

Flute Shape
Images

Clear

Helix Angle (θ)
- Without Torsion
- Weak Helix (15 to 25°)
- Standard Helix (30 to 40°)
- Powerful Helix (45° to 60°)
- Uneven Lead
Drawing

Clear

Narrow search by specifying Manufacturer

- MISUMI (74)
- C-Value ()
- OSG (70)
- NS TOOL (69)
- Nachi-Fujikoshi (40)
- GUHRING (38)
- DIJET (18)
- ASAHI TOOLS (17)
- KYOCERA (16)
- OKAZAKI (15)
- 7 LEADERS (13)
- KYOWASEIKO (13)
- EIKOSHA (6)
- S&K (6)
- ATOM (5)
- GCT (2)
- Poulten&Graf (2)
- UNION TOOL (2)
- VAN HOORN (2)
- PROCHI (1)
- TAIYO TOOL (1)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Square End Mills (Carbide)

Top of the page

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)

Contact Information: Contact Us

Inquiry Format

All Categories

Categories

Applications

Brands

How can we improve?

MISUMI Square End Mills (Carbide)

Configure

Stock

Specification/Dimensions

Metric / Inch

Flute Diameter (D)(φ)

Work Material

Flute Length (ℓ)(mm)

Number of Flutes(sheet)

Model

Coating

Link Diameter (d)(mm)

Overall Length (L)(mm)

Length Under Neck (ℓ1)(mm)

Processing Applications

Flute Shape

Helix Angle (θ)

Narrow search by specifying Manufacturer

CAD

Related Categories to Square End Mills (Carbide)

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)