(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
XAL Series Carbide Square End Mill, 2-Flute/3D Flute Length Model
Move the mouse over the image to zoom
- Volume Discount
Misumi's unique lineup of fine blade length is available at attractive low prices [C-Value]
- XAL
- General Steel
- 2 Flutes
Part Number
Configured Part Number is shown.
| Part Number |
|---|
Loading...
Specifications
| Model Number | Shank Diameter d |
Flute Length ℓ |
Overall Length L |
Figure | Standards Y/N | |||
| Outer Diameter D |
Shank Diameter d |
|||||||
| Standard | Sharp Edge | |||||||
| XAL-EM2R (Standard) XAL-PEM2R (Sharp Edge) |
0.1 | — | 3 | 0.3 | 40 | 1 | No Standards | ● |
| 0.2 | — | 3 | 0.6 | 40 | 1 | No Standards | ● | |
| 0.3 | — | 3 | 0.9 | 40 | 1 | ● | ● | |
| 0.4 | — | 3 | 1.2 | 40 | 1 | No Standards | ● | |
| 0.5 | — | 3 | 1.5 | 40 | 1 | ● | ● | |
| 0.6 | — | 3 | 1.8 | 40 | 1 | ● | ● | |
| 0.7 | — | 3 | 2.1 | 40 | 1 | No Standards | ● | |
| 0.8 | — | 3 | 2.4 | 40 | 1 | ● | ● | |
| 0.9 | — | 4 | 2.7 | 45 | 1 | No Standards | ● | |
| 1 | — | 4 | 3 | 45 | 1 | ● | ● | |
| 1.1 | — | 4 | 3.3 | 45 | 1 | No Standards | ● | |
| 1.2 | — | 4 | 3.6 | 45 | 1 | No Standards | ● | |
| 1.3 | — | 4 | 3.9 | 45 | 1 | No Standards | ● | |
| 1.4 | — | 4 | 4.2 | 45 | 1 | No Standards | ● | |
| 1.5 | — | 4 | 4.5 | 45 | 1 | ● | ● | |
| 1.6 | — | 4 | 4.8 | 45 | 1 | No Standards | ● | |
| 1.7 | — | 4 | 5.1 | 45 | 1 | No Standards | ● | |
| 1.8 | — | 4 | 5.4 | 45 | 1 | No Standards | ● | |
| 1.9 | — | 4 | 5.7 | 45 | 1 | No Standards | ● | |
| 2 | — | 4 | 6 | 45 | 1 | ● | ● | |
| 2.1 | — | 4 | 6.3 | 45 | 1 | No Standards | ● | |
| 2.2 | — | 4 | 6.6 | 45 | 1 | No Standards | ● | |
| 2.3 | — | 4 | 6.9 | 45 | 1 | No Standards | ● | |
| 2.4 | — | 4 | 7.2 | 45 | 1 | No Standards | ● | |
| 2.5 | — | 4 | 7.5 | 45 | 1 | No Standards | ● | |
| 2.6 | — | 4 | 7.8 | 45 | 1 | No Standards | ● | |
| 2.7 | — | 4 | 8.1 | 45 | 1 | No Standards | ● | |
| 2.8 | — | 4 | 8.4 | 45 | 1 | No Standards | ● | |
| 2.9 | — | 4 | 8.7 | 45 | 1 | No Standards | ● | |
| 3 | 4 | 4 | 9 | 45 | 1 | No Standards | ● | |
| 3 | — | 6 | 9 | 45 | 1 | ● | ● | |
| 3.1 | — | 6 | 9.3 | 45 | 1 | No Standards | ● | |
| 3.2 | — | 6 | 9.6 | 45 | 1 | No Standards | ● | |
| 3.3 | — | 6 | 9.9 | 45 | 1 | No Standards | ● | |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
| Model Number | Shank Diameter d |
Flute Length ℓ |
Overall Length L |
Figure | Standards Y/N | |||
| Outer Diameter D |
Shank Diameter d |
|||||||
| Standard | Sharp Edge | |||||||
| XAL-EM2R (Standard) XAL-PEM2R (Sharp Edge) |
3.4 | — | 6 | 10.2 | 45 | 1 | No Standards | ● |
| 3.5 | — | 6 | 10.5 | 45 | 1 | ● | ● | |
| 3.6 | — | 6 | 10.8 | 45 | 1 | No Standards | ● | |
| 3.7 | — | 6 | 11.1 | 45 | 1 | No Standards | ● | |
| 3.8 | — | 6 | 11.4 | 45 | 1 | No Standards | ● | |
| 3.9 | — | 6 | 11.7 | 45 | 1 | No Standards | ● | |
| 4 | 4 | 4 | 12 | 50 | 2 | No Standards | ● | |
| 4 | — | 6 | 12 | 50 | 1 | ● | ● | |
| 4.1 | — | 6 | 12.3 | 50 | 1 | No Standards | ● | |
| 4.2 | — | 6 | 12.6 | 50 | 1 | No Standards | ● | |
| 4.3 | — | 6 | 12.9 | 50 | 1 | No Standards | ● | |
| 4.4 | — | 6 | 13.2 | 50 | 1 | No Standards | ● | |
| 4.5 | — | 6 | 13.5 | 50 | 1 | No Standards | ● | |
| 4.6 | — | 6 | 13.8 | 55 | 1 | No Standards | ● | |
| 4.7 | — | 6 | 14.1 | 55 | 1 | No Standards | ● | |
| 4.8 | — | 6 | 14.4 | 55 | 1 | No Standards | ● | |
| 4.9 | — | 6 | 14.7 | 55 | 1 | No Standards | ● | |
| 5 | — | 6 | 15 | 55 | 1 | ● | ● | |
| 5.1 | — | 6 | 15.3 | 55 | 1 | No Standards | ● | |
| 5.2 | — | 6 | 15.6 | 55 | 1 | No Standards | ● | |
| 5.3 | — | 6 | 15.9 | 55 | 1 | No Standards | ● | |
| 5.4 | — | 6 | 16.2 | 55 | 1 | No Standards | ● | |
| 5.5 | — | 6 | 16.5 | 55 | 1 | No Standards | ● | |
| 5.6 | — | 6 | 16.8 | 60 | 1 | No Standards | ● | |
| 5.7 | — | 6 | 17.1 | 60 | 1 | No Standards | ● | |
| 5.8 | — | 6 | 17.4 | 60 | 1 | No Standards | ● | |
| 5.9 | — | 6 | 17.7 | 60 | 1 | No Standards | ● | |
| 6 | — | 6 | 18 | 60 | 2 | ● | ● | |
| 6.5 | — | 8 | 19.5 | 60 | 1 | No Standards | ● | |
| 7 | — | 8 | 21 | 60 | 1 | ● | ● | |
| 7.5 | — | 8 | 22.5 | 70 | 1 | No Standards | ● | |
| 8 | — | 8 | 24 | 70 | 2 | ● | ● | |
| 8.5 | — | 10 | 25.5 | 70 | 1 | No Standards | ● | |
| 9 | — | 10 | 27 | 70 | 1 | No Standards | ● | |
| 9.5 | — | 10 | 28.5 | 75 | 1 | No Standards | ● | |
| 10 | — | 10 | 30 | 80 | 2 | ● | ● | |
| 11 | — | 12 | 33 | 85 | 1 | No Standards | ● | |
| 12 | — | 12 | 36 | 85 | 2 | ● | ● | |
| 14 | — | 12 | 42 | 80 | 3 | ● | No Standards | |
| 16 | — | 16 | 48 | 110 | 2 | ● | ● | |
| 18 | — | 16 | 54 | 110 | 3 | No Standards | ● | |
| 20 | — | 20 | 60 | 110 | 2 | ● | ● | |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
More Information
● Competitive pricing with significant price breaks on larger quantities.
● The XAL coating provides excellent lubrication and delivers stable wear-resistant performance.This is apparent especially when milling raw materials, giving improved shape accuracy to the machined objects.
● 2-flute end mill can be used in a wide variety of applications.
● The XAL coating is non-conductive. Cannot be used with conduction model tool setters.
Basic Information
| Number of Flutes(sheet) | 2 | Model | Square | Coating | For General Steel (AlCrN etc.) |
|---|---|---|---|---|---|
| Helix Angle (θ) | Standard Helix (30 to 40°) | Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
| ● Inventory Product □ Manufacturer Product | ● |
Specification/Dimensions
-
Outer Diameter (D)(φ)
-
Work Material
- General Steel
- Heat-Treated Steel
- Stainless Steel
- Cast Iron
- Aluminum Alloy
- Copper Alloy
- Resin
-
Flute Length (ℓ)(mm)
- 0.3
- 0.6
- 0.9
- 1.2
- 1.5
- 1.8
- 2.1
- 2.4
- 2.7
- 3
- 3.3
- 3.6
- 3.9
- 4.2
- 4.5
- 4.8
- 5.1
- 5.4
- 5.7
- 6
- 6.3
- 6.6
- 6.9
- 7.2
- 7.5
- 7.8
- 8.1
- 8.4
- 8.7
- 9
- 9.3
- 9.6
- 9.9
- 10.2
- 10.5
- 10.8
- 11.1
- 11.4
- 11.7
- 12
- 12.3
- 12.6
- 12.9
- 13.2
- 13.5
- 13.8
- 14.1
- 14.4
- 14.7
- 15
- 15.3
- 15.6
- 15.9
- 16.2
- 16.5
- 16.8
- 17.1
- 17.4
- 17.7
- 18
- 19.5
- 21
- 22.5
- 24
- 25.5
- 27
- 28.5
- 30
- 33
- 36
- 42
- 48
- 54
- 60
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Groove
- Inclined Cutting
-
Geometry
- Sharp Corner
- With Lead
-
type
- XAL-EM2R
- XAL-PEM2R
Days to Ship
-
- All
- 8 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute/Regular Model
- 2-Flute, Long Type FX-MG-EDL
- 4-Flute Short Type MG-EMS
- SSF120 CBN Super Surface End Mill
- PCD End Mill, 3-Flute Long Shank 5496
- All Purpose Unequal Lead End Mill Long 4-Flute RF100U 3627
- GCT+ 4 Flutes Anti-Vibration Core Power
- Carbide 4-Flute Variable Split Variable Lead End Mill 38°/41° E141-3.0HX
Complementary Products
-
XAL Series Carbide Multi-functional Square End Mill, 3-Flute, 45° Torsion/Short Model
MISUMI Days to Ship : 8 Days or more
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy