(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
MISUMI Strut Posts
| Days to Ship |
|
|---|
-
Circular Posts - Both ends threaded, with flat surfaces for wrench, configurable length.
MISUMI
New: Black anodized aluminum added and available length extended. [July 2023]
Metric Female-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2017-T4 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear or Black Anodize or No Surface Treatment.And installation or removal of Wrench Flats can be selected.
[Diameter range] 5mm - 50mm
[Length range] 8mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Hexagonal Posts - One threaded end, one internal threaded end, configurable length.
MISUMI
New: Aluminum material is added and available length extended. [July 2023]
Metric Male-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2011-T8 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear or Black Anodize or No Surface Treatment.
[Diameter range] 5mm - 32mm
[Length range] 8mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Hexagonal Posts - With internal thread at both ends, configurable length.
MISUMI
New: Black anodized aluminum added and available length extended. [July 2023]
Metric Female-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear or Black Anodize or No Surface Treatment.
[Diameter range] 5mm - 32mm
[Length range] 8mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Circular Posts - One threaded end, one internal threaded end, flat surfaces for wrench.
MISUMI
New: Aluminum material is added. [July 2023]
Metric Male-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2017-T4 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear or Black Anodize or No Surface Treatment. And installation or removal of Wrench Flats can be selected.
[Diameter range] 5mm - 50mm
[Length range] 15mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Hexagonal Posts - Threaded ends, configurable dimensions.
MISUMI
New: Aluminum material is added and available length extended. [July 2023]
Metric Male-Male Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear / Black Anodize or No Surface Treatment.
[Diameter range] 5mm - 32mm
[Length range] 8mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
[Thread Length range] 5mm - 100mm
[Thread Size]2 - 24
Inch option available, please click Here.- Degreasing
- Spec Change
- Lead Time Reduction
- inCAD Components
Days to Ship: 9 Days or more -
MISUMI
Inch Male-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.
[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00
[Length range] 1.00 - 24.00. Use the alteration LKC to change the tolerance.
Metric option available, please click Here.- INCH
Days to Ship: 10 Days or more -
Hexagonal Posts - With internal and external threading, configurable dimensions.
MISUMI
New: Aluminum material is added and available length extended. [July 2023]
Metric Male-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear / Black Anodize or No Surface Treatment.
[Diameter range] 5mm - 32mm
[Length range] 8mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
[Thread Length range] 5mm - 100mm
[Thread Size]2 - 24
Inch option available, please click Here.- Degreasing
- Spec Change
- Lead Time Reduction
- inCAD Components
Days to Ship: 9 Days or more -
Circular Posts - One end with external thread and one with internal thread, configurable dimensions.
MISUMI
New: Aluminum material is added. [July 2023]
Metric Male-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2011-T8 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/ Clear or Black Anodize or No Surface Treatment.And installation or removal of Wrench Flats can be selected.
[Diameter range] 5mm - 50mm
[Length range] 15mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Degreasing
- Spec Change
- Lead Time Reduction
- inCAD Components
Days to Ship: 9 Days or more -
Hexagonal Posts - Both ends threaded, configurable length, selectable thread, (Inches).
MISUMI
Inch Female-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.Thread diameter is selectable.
[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00
[Length range] 1.00 - 24.00. Use the alteration LKC to change the tolerance.
Metric option available, please click Here.- INCH
Days to Ship: 10 Days or more -
MISUMI
Inch Thread/Tap selectable Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.Thread diameter is selectable.
[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00
[Length range] 1.00 - 24.00. Use the alteration LKC to change the tolerance.
Metric option available, please click Here.- INCH
Days to Ship: 10 Days or more -
MISUMI
Inch Thread/Tap selectable Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.Thread diameter is selectable.
[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00
[Length range] 1.00 - 24.00. Use the alteration LKC to change the tolerance.
Metric option available, please click Here.- Lead Time Reduction
- INCH
Days to Ship: 10 Days or more -
Hexagonal Posts - Small thread, with external and internal threading.
MISUMI
Metric Male-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent and 303 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/ or No Surface Treatment.Suitable for Limited Spaces or Space-Saving required Places.
[Diameter range] 4mm, 5mm, 5.5mm
[Length range]5mm - 20mm.
Inch option available, please click Here.- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Square Posts - Graduated, configurable length, hollow.
MISUMI
Due to square pipe with scale, this is suitable for preventing sensor/camera from rotating during frequent setup changes.
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Hexagonal Posts - One end with external thread, configurable length.
MISUMI
New: Aluminum material is added and available length extended. [July 2023]
One End Threaded Metric Male-Male Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2011-T8 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating / Clear or Black Anodize or No Surface Treatment. The Pilot Size is also configurable..
[Diameter range] 5mm - 32mm
[Length range] 15mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Degreasing
- Spec Change
- Lead Time Reduction
- inCAD Components
Days to Ship: 9 Days or more -
Circular Posts - Stepped, internal threading on both ends.
MISUMI
New: Aluminum material is added. [July 2023]
Metric Female-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2017-T4 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/ Clear or Black Anodize or No Surface Treatment.And Wrench Flats,Thread diameter, Pilot size can be selectable.
[Diameter range] 5mm,10mm,12mm,15mm,20mm,25mm,30mm
[Length range] 15mm - 900mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Degreasing
- Spec Change
- Lead Time Reduction
- inCAD Components
Days to Ship: 9 Days or more -
Circular Posts - With external threading on one end, key flats.
MISUMI
New: Aluminum material is added. [July 2023]
Metric Female-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2017 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/ Clear or Black Anodize or No Surface Treatment.And Wrench Flats,Thread diameter, Pilot size can be selectable.
[Diameter range] 5mm,6mm,8mm,10mm,12mm,15mm,20mm,25mm,30mm,35mm,40mm,50mm
[Length range] 15mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Degreasing
- Spec Change
- Lead Time Reduction
- inCAD Components
Days to Ship: 9 Days or more -
MISUMI
Larger Mounting Area than Hexagonal Posts Convenient for Side Mounting.
- Lead Time Reduction
- inCAD Components
Days to Ship: 9 Days or more -
Circular Posts - Hollow, with V-groove, configurable length.
MISUMI
•Type: Circular Shape
•Left End Shape: V Groove
•Right End Shape: Straight
•Style: Hollow
•Engraved Scale: Without Scale- inCAD Components
Days to Ship: 10 Days or more -
Circular Posts - With millimeter scale, solid, configurable length.
MISUMI
Convenient for Changeovers of Cameras, Sensors, etc.
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
MISUMI
Lightweighed and non-electrical conductive, because this is made of resin. Threaded inserts are added to the body to strengthen the tapped holes.
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Hexagonal Spacers - PEEK material, both ends with internal threading.
MISUMI
•Type: Hex
•Left End Shape: Taps
•Right End Shape: Taps
•Style: Solid
•Engraved Scale: Without Scale- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Hexagonal Posts - Both ends threaded, (Inches).
MISUMI
Inch Female-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.
[Diameter range] 0.38, 0.50, 0.63, 0.75
[Length range] 1.00, 1.50, 2.00, 2.50, 3.00, 3.50, 4.00, 5.00, 6.00. Use the alteration LKC to change the tolerance.
Metric option available, please click Here.- Volume Discount
- INCH
Days to Ship: 14 Days or more -
MISUMI
Inch Male-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.Thread diameter is selectable.
[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00
[Length range] 1.00 - 24.00. Use the alteration LKC to change the tolerance.
Metric option available, please click Here.- INCH
Days to Ship: 10 Days or more -
Circular Posts - One end with male thread, one end with female thread, (Inches).
MISUMI
Inch Male-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.
[Diameter range] 0.38, 0.50, 0.63, 0.75
[Length range] 1.00, 1.50, 2.00, 2.50, 3.00, 3.50, 4.00, 5.00, 6.00. Use the alteration LKC to change the tolerance.
Metric option available, please click Here.- Volume Discount
- INCH
Days to Ship: 14 Days or more -
Square Posts - Both ends threaded, configurable length.
MISUMI
Larger Mounting Area than Hexagonal Posts Convenient for Side Mounting.
- Lead Time Reduction
- inCAD Components
Days to Ship: 9 Days or more -
Circular Posts - For devices, with V-groove, configurable length.
MISUMI
•Type: Circular Shape
•Left End Shape: V Groove
•Right End Shape: Straight
•Style: Solid
•Engraved Scale: Without Scale- inCAD Components
Days to Ship: 10 Days or more -
Circular Posts - Graduated without numbers, hollow, configurable length.
MISUMI
Posts for stand with scale. Can be specified in 1mm increment.
- inCAD Components
Days to Ship: 10 Days or more -
Hexagonal Posts - Both ends threaded, configurable length, (Inches).
MISUMI
Inch Female-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.
[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00
[Length range] 1.00 - 24.00. Use the alteration LKC to change the tolerance.
Metric option available, please click Here.- INCH
Days to Ship: 10 Days or more -
MISUMI
Inch Male-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.
[Diameter range] 0.38, 0.50, 0.63, 0.75
[Length range] 1.00, 1.50, 2.00, 2.50, 3.00, 3.50, 4.00, 5.00, 6.00. Use the alteration LKC to change the tolerance.>
Metric option available, please click Here.- Volume Discount
- INCH
Days to Ship: 14 Days or more -
Circular Posts - Both ends threaded, (Inches).
MISUMI
Inch Female-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.
[Diameter range] 0.38, 0.50, 0.63, 0.75
[Length range] 1.00, 1.50, 2.00, 2.50, 3.00, 3.50, 4.00, 5.00, 6.00. Use the alteration LKC to change the tolerance.
Metric option available, please click Here.- Volume Discount
- INCH
Days to Ship: 14 Days or more -
Circular Posts - Both ends threaded, configurable length, (Inches).
MISUMI
Inch Female-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.
[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00
[Length range] 1.00 - 24.00. Use the alteration LKC to change the tolerance.
Metric option available, please click Here.- Lead Time Reduction
- INCH
Days to Ship: 10 Days or more -
Circular Posts - Both ends threaded, configurable length, selectable thread, (Inches).
MISUMI
Inch Female-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating or No Surface Treatment.Thread diameter is selectable.
[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00
[Length range] 1.00 - 24.00. Use the alteration LKC to change the tolerance.
Metric option available, please click Here.- Lead Time Reduction
- INCH
Days to Ship: 10 Days or more -
MISUMI
Inch Male-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.
[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00
[Length range] 1.00 - 24.00. Use the alteration LKC to change the tolerance.
Metric option available, please click Here.- Lead Time Reduction
- INCH
Days to Ship: 10 Days or more -
MISUMI
Inch Male-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.Thread diameter is selectable.
[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00
[Length range] 1.00 - 24.00. Use the alteration LKC to change the tolerance.
Metric option available, please click Here.- Lead Time Reduction
- INCH
Days to Ship: 10 Days or more -
Circular Posts - For device supports, configurable length, hollow or solid, (Inches).
MISUMI
Inch circular Circular Posts (Standoffs) are available in 1045 Carbon Steel Equivalent, and 304 Stainless Steel, with the following options for Surface Treatment : Electroless Nickel Plating or No Surface Treatment.Thread diameter is selectable.
[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00
[Length range] 2.00 - 18.00.
Metric option available, please click Here.- INCH
Days to Ship: 10 Days or more -
Hexagonal Posts - Small thread, both ends threaded, selectable length.
MISUMI
Metric Female-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent and 303 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/ or No Surface Treatment.Suitable for Limited Spaces or Space-Saving required Places.
[Diameter range] 4mm, 5mm, 5.5mm
[Length range]5mm - 20mm.
Inch option available, please click Here.- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Hexagonal Posts - With pilot, both ends threaded, length configurable.
MISUMI
New: Aluminum material is added and available length extended. [July 2023]
Metric Female-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2011-T8 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating / Clear or Black Anodize or No Surface Treatment. The Pilot Size is also configurable..
[Diameter range] 8mm - 32mm
[Length range] 15mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Degreasing
- Spec Change
- Lead Time Reduction
- inCAD Components
Days to Ship: 9 Days or more -
MISUMI
New: Aluminum material is added and available length extended. [July 2023]
Metric Male-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2011-T8 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating / Clear or Black Anodize or No Surface Treatment. The Pilot Size is also configurable..
[Diameter range] 8mm - 32mm
[Length range] 15mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Degreasing
- Spec Change
- Lead Time Reduction
- inCAD Components
Days to Ship: 9 Days or more -
Hexagonal Posts - With pilot, both ends threaded, selectable values.
MISUMI
New: Aluminum material is added and available length extended. [July 2023]
Metric Male-Male Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2011-T8 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating / Clear or Black Anodize or No Surface Treatment. The Pilot Size is also configurable..
[Diameter range] 8mm - 32mm
[Length range] 15mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Degreasing
- Spec Change
- Lead Time Reduction
- inCAD Components
Days to Ship: 9 Days or more -
Hexagonal Posts - One threaded end, configurable length.
MISUMI
New: Aluminum material is added and available length extended. [July 2023]
One End Tapped Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2011-T8 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating / Clear or Black Anodize or No Surface Treatment. The Pilot Size is also configurable..
[Diameter range] 5mm - 32mm
[Length range] 15mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Degreasing
- Spec Change
- Lead Time Reduction
- inCAD Components
Days to Ship: 9 Days or more -
Circular Posts - Threaded ends, configurable dimensions.
MISUMI
New: Aluminum material is added. [July 2023]
Metric Male-Male Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2017-T4 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/ Clear or Black Anodize or No Surface Treatment.And installation or removal of Wrench Flats can be selected.
[Diameter range] 5mm - 50mm
[Length range] 15mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Degreasing
- Spec Change
- Lead Time Reduction
- inCAD Components
Days to Ship: 9 Days or more -
Circular Posts - With pilot, one end with external thread and the other with internal thread.
MISUMI
New: Aluminum material is added. [July 2023]
Metric Male-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2017 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/ Clear or Black Anodize or No Surface Treatment.And Wrench Flats,Thread diameter, Pilot size can be selectable.
[Diameter range] 5mm,10mm,12mm,15mm,20mm,25mm,30mm
[Length range] 20mm - 900mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Degreasing
- Spec Change
- Lead Time Reduction
- inCAD Components
Days to Ship: 9 Days or more -
Circular Posts - With pilot, both ends threaded.
MISUMI
New: Aluminum material is added. [July 2023]
Metric Male-Male Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2017 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/ Clear or Black Anodize or No Surface Treatment.And Wrench Flats,Thread diameter, Pilot size can be selectable.
[Diameter range] 5mm,10mm,12mm,15mm,20mm,25mm,30mm
[Length range] 20mm - 900mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Degreasing
- Spec Change
- Lead Time Reduction
- inCAD Components
Days to Ship: 9 Days or more -
Circular Posts - With internal threading on one end, key flats.
MISUMI
New: Aluminum material is added. [July 2023]
Metric Female-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2017 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/ Clear or Black Anodize or No Surface Treatment.And Wrench Flats,Thread diameter, Pilot size can be selectable.
[Diameter range] 5mm,6mm,8mm,10mm,12mm,15mm,20mm,25mm,30mm,35mm,40mm,50mm
[Length range] 15mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.- Degreasing
- Spec Change
- Lead Time Reduction
- inCAD Components
Days to Ship: 9 Days or more -
Circular Posts - With millimeter scale, hollow, configurable length.
MISUMI
Convenient for Changeovers of Cameras, Sensors, etc.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Type |
| End Shape (Left) |
| End Shape (Right) |
| Post Size(mm) |
| Post Size(inch) |
| Wrench Flats B(mm) |
| Length L(inch) |
| Material |
| Surface Treatment |
| Style |
| Engraved Scale |
| Pilotted Ends |
| Gas Vent Hole |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Circular Posts - Both ends threaded, with flat surfaces for wrench, configurable length. | Hexagonal Posts - One threaded end, one internal threaded end, configurable length. | Hexagonal Posts - With internal thread at both ends, configurable length. | Circular Posts - One threaded end, one internal threaded end, flat surfaces for wrench. | Hexagonal Posts - With internal and external threading, configurable dimensions. | Circular Posts - One end with external thread and one with internal thread, configurable dimensions. | Hexagonal Posts - Both ends threaded, configurable length, selectable thread, (Inches). | Hexagonal Posts - Small thread, with external and internal threading. | Hexagonal Posts - One end with external thread, configurable length. | Circular Posts - With external threading on one end, key flats. | Circular Posts - Hollow, with V-groove, configurable length. | Circular Posts - With millimeter scale, solid, configurable length. | Hexagonal Spacers - PEEK material, both ends with internal threading. | Circular Posts - One end with male thread, one end with female thread, (Inches). | Circular Posts - For devices, with V-groove, configurable length. | Circular Posts - Graduated without numbers, hollow, configurable length. | Hexagonal Posts - Both ends threaded, configurable length, (Inches). | Circular Posts - Both ends threaded, configurable length, (Inches). | Circular Posts - Both ends threaded, configurable length, selectable thread, (Inches). | Circular Posts - For device supports, configurable length, hollow or solid, (Inches). | Hexagonal Posts - Small thread, both ends threaded, selectable length. | Hexagonal Posts - With pilot, both ends threaded, length configurable. | Hexagonal Posts - With pilot, both ends threaded, selectable values. | Circular Posts - With pilot, one end with external thread and the other with internal thread. | Circular Posts - With internal threading on one end, key flats. | Circular Posts - With millimeter scale, hollow, configurable length. | |||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 9 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 10 Days or more | 9 Days or more | 9 Days or more | 10 Days or more | 10 Days or more | 10 Days or more |
Same day or more
Show Stock Products | 10 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 10 Days or more |
Same day or more
Show Stock Products | 10 Days or more |
Same day or more
Show Stock Products | 14 Days or more | 10 Days or more | 14 Days or more | 9 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 14 Days or more | 14 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more |
Same day or more
Show Stock Products | 9 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 8 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Type | Circular Shape | Hex | Hex | Circular Shape | Hex | Hex | Hex | Circular Shape | Hex | Hex | Circular Shape | Hex | Square | Hex | Circular Shape | Circular Shape | Square | Circular Shape | Circular Shape | Circular Shape | Hex | Hex | Hex | Circular Shape | Square | Circular Shape | Circular Shape | Hex | Hex | Circular Shape | Circular Shape | Circular Shape | Circular Shape | Circular Shape | Circular Shape | Hex | Hex | Hex | Hex | Hex | Circular Shape | Circular Shape | Circular Shape | Circular Shape | Circular Shape |
| End Shape (Left) | Taps | Threads | Taps | Threads | Threads | Threads | Threads | Threads | Taps | Threads | Threads | Threads | Straight | Threads | Taps | Threads | Threads | V Groove | Straight | Taps | Taps | Taps | Threads | Threads | Taps | V Groove | Straight | Taps | Threads | Taps | Taps | Taps | Threads | Threads | - | Taps | Taps | Threads | Threads | Taps | Threads | Threads | Threads | Taps | Straight |
| End Shape (Right) | Taps | Taps | Taps | Taps | Threads | Taps | Taps | Taps | Taps | Taps / Threads | Taps | Taps | Straight | Straight | Taps | Straight | Taps | Straight | Straight | Straight / Taps | Taps | Taps | Taps | Taps | Taps | Straight | Straight | Taps | Taps | Taps | Taps | Taps | Taps | Taps | - | Taps | Taps | Taps | Threads | Straight | Threads | Taps | Threads | Straight | Straight |
| Post Size(mm) | 5 ～ 50 | 5 ～ 32 | 5 ～ 32 | 5 ～ 50 | 5 ～ 32 | - | 5 ～ 32 | 5 ～ 50 | - | - | - | 4 ～ 5.5 | 10 ～ 25 | 5 ～ 32 | 8 ～ 30 | 5 ～ 50 | 8 ～ 30 | 10 ～ 50 | 10 ～ 25 | 6 ～ 30 | 6 ～ 13 | - | - | - | 8 ～ 30 | 6 ～ 50 | 10 ～ 25 | - | - | - | - | - | - | - | - | 4 ～ 5.5 | 8 ～ 32 | 8 ～ 32 | 8 ～ 32 | 5 ～ 32 | 5 ～ 50 | 8 ～ 30 | 8 ～ 30 | 5 ～ 50 | 10 ～ 20 |
| Post Size(inch) | - | - | - | - | - | 0.38 inch (3/8") ～ 1.00 inch (1") | - | - | 0.38 inch (3/8") ～ 1.00 inch (1") | 0.38 inch (3/8") ～ 1.00 inch (1") | 0.38 inch (3/8") ～ 1.00 inch (1") | - | - | - | - | - | - | - | - | - | - | 0.38 inch (3/8") ～ 0.75 inch (3/4") | 0.38 inch (3/8") ～ 1.00 inch (1") | 0.38 inch (3/8") ～ 0.75 inch (3/4") | - | - | - | 0.38 inch (3/8") ～ 1.00 inch (1") | 0.38 inch (3/8") ～ 0.75 inch (3/4") | 0.38 inch (3/8") ～ 0.75 inch (3/4") | 0.38 inch (3/8") ～ 1.00 inch (1") | 0.38 inch (3/8") ～ 1.00 inch (1") | 0.38 inch (3/8") ～ 1.00 inch (1") | 0.38 inch (3/8") ～ 1.00 inch (1") | 0.38 inch (3/8") ～ 1.00 inch (1") | - | - | - | - | - | - | - | - | - | - |
| Wrench Flats B(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Length L(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ～ 6 | - | 1 ～ 6 | - | - | - | - | 1 ～ 6 | 1 ～ 6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Steel / Stainless Steel / Aluminum | Steel / Stainless Steel | Steel / Stainless Steel / Aluminum | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Resin | Resin | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel |
| Surface Treatment | Not Provided / Black Oxide Coating / Electroless Nickel Plating / Clear Anodize / Trivalent Chromate | Not Provided / Black Oxide Coating / Electroless Nickel Plating / Trivalent Chromate | Not Provided / Black Oxide Coating / Electroless Nickel Plating / Clear Anodize / Trivalent Chromate | Not Provided / Black Oxide Coating / Electroless Nickel Plating / Trivalent Chromate | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided | Not Provided | Not Provided | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided |
| Style | Solid | Solid | Solid | Solid | Solid | - | Solid | Solid | - | - | - | Solid | Hollow | Solid | Solid | Solid | Solid | Hollow | Solid | Solid | Solid | - | - | - | Solid | Solid | Hollow | - | - | - | - | - | - | - | - | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Hollow |
| Engraved Scale | Without Scale | Without Scale | Without Scale | Without Scale | Without Scale | - | Without Scale | Without Scale | - | - | - | Without Scale | With Scale | Without Scale | Without Scale | Without Scale | Without Scale | Without Scale | With Scale | Without Scale | Without Scale | - | - | - | Without Scale | Without Scale | With Scale | - | - | - | - | - | - | - | - | Without Scale | Without Scale | Without Scale | Without Scale | Without Scale | Without Scale | Without Scale | Without Scale | Without Scale | With Scale |
| Pilotted Ends | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | - | - | - | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | - | - | Not Provided | Not Provided | Not Provided | - | - | - | - | - | - | - | - | Not Provided | Provided | Provided | Provided | Not Provided | Not Provided | Provided | Provided | Not Provided | Not Provided |
| Gas Vent Hole | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Type
-
End Shape (Left)
-
End Shape (Right)
-
Metric / Inch
-
Post Size(mm)
-
Post Size(inch)
-
Wrench Flats B(mm)
-
Length L(inch)
-
Material
-
Surface Treatment
-
Style
-
Engraved Scale
-
Pilotted Ends
-
Gas Vent Hole
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy