(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Timing Pulleys & Idlers
-
- Recommendation
- New Products
Timing Pulleys - High torque, MR2 series, Power Grip® GT3.
MISUMI
•Belt Shape : MR2(for PowerGrip® GT®3)
•Pulley Shape : C Type, Shape A, Shape B
•Material : Aluminum Alloy, Steel
•Type : Timing Pulleys
For complete product overview and details on MR2 Timing Pulley - High Torque, 2mm PowerGrip® GT®3 (MISUMI) see the sections below:- Volume Discount
- inCAD Components
Days to Ship: 9 Days or more -
- Recommendation
- New Products
Timing Pulleys - High Torque, MR3 Series, Power Grip® GT3.
MISUMI
•Belt Shape : MR3(for PowerGrip® GT®3)
•Pulley Shape : C Type, Shape A, Shape B
•Material : Aluminum Alloy, Steel
•Type : Timing Pulleys
For complete product overview and details on MR3 Timing Pulley - High Torque, 3mm PowerGrip® GT®3 (MISUMI) see the sections below:- Volume Discount
- inCAD Components
Days to Ship: 9 Days or more -
Timing Pulleys - Regular Torque, T10 Series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
METRIC/ INCH Bores Available!- Volume Discount
- Lead Time Reduction
- METRIC
- INCH
- inCAD Components
Days to Ship: 8 Days or more -
Timing Pulleys - Transmission of heavy loads, AT5, AT10 series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
METRIC/ INCH Bores Available!- Volume Discount
- Spec Change
- METRIC
- INCH
- inCAD Components
Days to Ship: 8 Days or more -
Synchronous Pulleys - Regular Torque, L Series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
METRIC/ INCH Bores Available!- Volume Discount
- Lead Time Reduction
- METRIC
- INCH
- inCAD Components
Days to Ship: 8 Days or more -
Timing Pulleys - Regular Torque, T5 Series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
METRIC/ INCH Bores Available!- Volume Discount
- Lead Time Reduction
- METRIC
- INCH
- inCAD Components
Days to Ship: 8 Days or more -
Timing Pulleys - High torque, high positioning accuracy, GT2 series.
MISUMI
Circular Tooth Profile Pulleys with little backlash, suitable for positioning.
- Volume Discount
- Spec Change
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Synchronous Pulleys - Regular Torque, H Series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
METRIC/ INCH Bores Available!- Volume Discount
- Lead Time Reduction
- METRIC
- INCH
- inCAD Components
Days to Ship: 8 Days or more -
Timing Pulleys - High torque, high positioning accuracy, GT5 series.
MISUMI
Circular Tooth Profile Pulleys with little backlash, suitable for positioning.
- Spec Change
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Synchronous Pulleys - High Torque, S3M Series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
METRIC/ INCH Bores Available!- Volume Discount
- Lead Time Reduction
- METRIC
- INCH
- inCAD Components
Days to Ship: 7 Days or more -
Synchronous Pulleys - Regular Torque, XL Series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
METRIC/ INCH Bores Available!- Volume Discount
- Lead Time Reduction
- METRIC
- INCH
- inCAD Components
Days to Ship: 7 Days or more -
Synchronous Pulleys - High Torque, S8M Series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
METRIC/ INCH Bores Available!- Volume Discount
- Lead Time Reduction
- METRIC
- INCH
- inCAD Components
Days to Ship: 7 Days or more -
Synchronous Pulleys - Regular Torque, MXL Series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
METRIC/ INCH Bores Available!- Volume Discount
- Lead Time Reduction
- METRIC
- INCH
- inCAD Components
Days to Ship: 7 Days or more -
Synchronous Pulleys - High Torque, S5M Series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
METRIC/ INCH Bores Available!- Volume Discount
- Lead Time Reduction
- METRIC
- INCH
- inCAD Components
Days to Ship: 7 Days or more -
Timing Pulleys - Regular Torque, with locking bushing, T10 series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
Phase matching is easy because machining to shafts is not required.- Spec Change
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Timing Pulleys - Regular Torque, L Series, (Inches).
MISUMI
•Belt Shape : L
•Pulley Shape : Shape A, Shape B
•Material : Aluminum Alloy 7000 series(Duralumin), Steel
•Type : Timing Pulleys
For complete product overview and details on L Timing Pulley - Inch Bore (MISUMI) see the sections below:- Lead Time Reduction
- INCH
Days to Ship: 8 Days or more -
Timing Pulleys - High Torque, with Fixing Hub, S8M Series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
Phase matching is easy because machining to shafts is not required.- Spec Change
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Synchronous Pulleys - High Torque, P2M and P3M Series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Timing Pulleys - High Torque, P5M Series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
- New Products
MISUMI
Small pitch timing pulley suitable for small machines.
- inCAD Components
Days to Ship: 10 Days or more -
Synchronous Pulleys - Zero backlash, S8M Series.
MISUMI
Timing pulleys with backlash significantly reduced compared to the conventional pulleys.
- Spec Change
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Timing Pulleys - High torque, with locking bushing, MechaLock type, S8M series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
MechaLock Standard Type incorporated Timing Pulley with centering function.- Volume Discount
- Spec Change
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Idler Pulleys with Teeth - With Flange, Bearings on Ends, T5 and T10 Series.
MISUMI
New: 304 SS and hard anodize types are added. [August 2023]
Can be used as the tension adjuster for timing belts or as the pulley on the driven side.- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Timing Pulleys - High Torque, with Fixing Hub, S3M Series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
Phase matching is easy because machining to shafts is not required.- Spec Change
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Timing Pulleys - High Torque, with Fixing Hub, S5M Series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
Phase matching is easy because machining to shafts is not required.- Spec Change
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
- New Products
Timing Pulleys - High Torque, MR5 Series, Power Grip® GT3.
MISUMI
•Belt Shape : MR5(for PowerGrip® GT®3)
•Pulley Shape : Shape A, Shape B
•Material : Aluminum Alloy, Steel
•Type : Timing Pulleys
For complete product overview and details on MR5 Timing Pulley - High Torque, 5mm PowerGrip® GT®3 (MISUMI) see the sections below:- Volume Discount
- inCAD Components
Days to Ship: 9 Days or more -
Timing Pulleys - Regular Torque, with Fixing Hub, XL Series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
Phase matching is easy because machining to shafts is not required.- Spec Change
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Timing Pulleys - With Fixing Hub, H Series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
Phase matching is easy because machining to shafts is not required.- Spec Change
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Timing Pulleys - High Torque, with MechaLock Fixing Hub, S5M Series.
MISUMI
MechaLock Standard Type incorporated Timing Pulley with centering function.
Stainless Seel type HHTAS and HHTS + expanded teeth selection options are newly added.[3/31/23]- Volume Discount
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Timing Pulleys - Regular torque, with locking bushing, MechaLock type, T10 series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
MechaLock Standard Type incorporated Timing Pulley with centering function.- Volume Discount
- Spec Change
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Timing Pulleys - Regular Torque, XL Series, (Inches).
MISUMI
•Belt Shape : XL
•Pulley Shape : Shape A, Shape B
•Material : Aluminum Alloy 2000 series, Steel
•Type : Timing Pulleys
For complete product overview and details on XL Timing Pulley - Inch Bore (MISUMI) see the sections below:- Lead Time Reduction
- INCH
Days to Ship: 10 Days or more -
Timing Pulleys - High torque, high positioning accuracy, GT3 series.
MISUMI
Circular Tooth Profile Pulleys with little backlash, suitable for positioning.
- Spec Change
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Timing Pulleys - High torque, high positioning accuracy, 8YU series.
MISUMI
Circular Tooth Profile Pulleys with little backlash, suitable for positioning.
- Spec Change
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Idler Pulleys with Teeth - With Flange, Bearings on Ends, L and H Series.
MISUMI
New: 304 SS and Electroless Nickel types are added. [August 2023]
Can be used as the tension adjuster for timing belts or as the pulley on the driven side.- Volume Discount
- inCAD Components
Days to Ship: 10 Days or more -
Idler Pulleys with Teeth - With Flange, Bearings on Ends, S2M and S3M Series.
MISUMI
New: 304 SS types are added. [August 2023]
Can be used as the tension adjuster for timing belts or as the pulley on the driven side.- Volume Discount
- Spec Change
- inCAD Components
Days to Ship: 8 Days or more -
Synchronous Pulleys - High Torque, S2M Series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
METRIC/ INCH Bores Available!- Lead Time Reduction
- METRIC
- INCH
- inCAD Components
Days to Ship: 7 Days or more -
Timing Pulleys - High Torque with Collar, S3M, S5M, and S8M Series.
MISUMI
Can be connected with a shaft by screwing. By doing so, positioning becomes easier.
- Spec Change
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Timing Pulleys - Regular Torque, with Fixing Hub, L Series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
Phase matching is easy because machining to shafts is not required.- Spec Change
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Idler Pulleys with Teeth - With Flange, Bearings on Ends, AT5 and AT10 Series.
MISUMI
New: 304 SS and electroless nickel types are added. [August 2023]
Can be used as the tension adjuster for timing belts or as the pulley on the driven side.- Volume Discount
- Spec Change
- inCAD Components
Days to Ship: 10 Days or more -
Idler Pulleys - Tensioning, Bearings on Both Sides.
MISUMI
Can be used as the tension adjuster for timing belts.
- Volume Discount
- Spec Change
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Mitsuboshi Belting
Easy specification of shaft hole type/diameter. MISUMI can machine the shaft hole for the pulley of the Mitsuboshi belt without drawings for delivery.
- Volume Discount
Days to Ship: 17 Days or more -
Mitsuboshi Belting
Easy specification of shaft hole type/diameter. MISUMI can machine the shaft hole for the pulley of the Mitsuboshi belt without drawings for delivery.
- Volume Discount
Days to Ship: 17 Days or more -
Timing Pulleys - Regular Torque, with locking bushing, T5 series.
MISUMI
New: Available number of teeth increased on metric pulleys. [August 2023]
Phase matching is easy because machining to shafts is not required.- Spec Change
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Timing Pulleys - Regular Torque, H Series, (Inches).
MISUMI
•Belt Shape : H
•Pulley Shape : Shape A, Shape B
•Material : Aluminum Alloy 7000 series(Duralumin), Steel
•Type : Timing Pulleys
For complete product overview and details on H Timing Pulley - Inch Bore (MISUMI) see the sections below:- Lead Time Reduction
- INCH
Days to Ship: 8 Days or more -
Idler Pulleys - Configurable width, series MXL, XL, L, H, (Inches).
MISUMI
•Belt Shape : H, L, MXL, XL
•Material : Aluminum Alloy 2000 series, Steel
•Type : Timing Pulleys
For complete product overview and details on Idler Pulley - Width Configurable, Inch Bore (MISUMI) see the sections below:- Volume Discount
- Lead Time Reduction
- INCH
Days to Ship: 10 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Type |
| Belt Shape |
| Belt Width Used(Inch)(Inch) |
| Belt Width Used(mm)(mm) |
| Number of Teeth(T) |
| Pulley Shape |
| Material |
| Surface Treatment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Mitsuboshi Belting | Mitsuboshi Belting | MISUMI | MISUMI | MISUMI |
| Product Series | Timing Pulleys - Transmission of heavy loads, AT5, AT10 series. | Timing Pulleys - High torque, high positioning accuracy, GT2 series. | Timing Pulleys - High torque, high positioning accuracy, GT5 series. | Timing Pulleys - Regular Torque, with locking bushing, T10 series. | Timing Pulleys - High torque, with locking bushing, MechaLock type, S8M series. | Idler Pulleys with Teeth - With Flange, Bearings on Ends, T5 and T10 Series. | Timing Pulleys - Regular Torque, with Fixing Hub, XL Series. | Timing Pulleys - High Torque, with MechaLock Fixing Hub, S5M Series. | Timing Pulleys - Regular torque, with locking bushing, MechaLock type, T10 series. | Timing Pulleys - High torque, high positioning accuracy, GT3 series. | Timing Pulleys - High torque, high positioning accuracy, 8YU series. | Idler Pulleys with Teeth - With Flange, Bearings on Ends, L and H Series. | Idler Pulleys with Teeth - With Flange, Bearings on Ends, S2M and S3M Series. | Timing Pulleys - High Torque with Collar, S3M, S5M, and S8M Series. | Idler Pulleys with Teeth - With Flange, Bearings on Ends, AT5 and AT10 Series. | Timing Pulleys - Regular Torque, with locking bushing, T5 series. | Idler Pulleys - Configurable width, series MXL, XL, L, H, (Inches). | ||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 9 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 7 Days or more | 7 Days or more | 7 Days or more | 7 Days or more | 7 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 9 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 9 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 7 Days or more | 10 Days or more | 10 Days or more | 10 Days or more |
Same day or more
Show Stock Products | 17 Days or more | 17 Days or more | 10 Days or more | 8 Days or more | 10 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Type | Timing Pulleys | Timing Pulleys | Timing Pulleys | Timing Pulleys | Timing Pulleys | Timing Pulleys | Timing Pulleys | Timing Pulleys | Timing Pulleys | Timing Pulleys | Timing Pulleys | Timing Pulleys | Timing Pulleys | Timing Pulleys | Keyless Pulley | Timing Pulleys | Keyless Pulley | Timing Pulleys | Timing Pulleys | Timing Pulleys | Timing Pulleys | Keyless Pulley | Idlers with Teeth | Keyless Pulley | Keyless Pulley | Timing Pulleys | Keyless Pulley | Keyless Pulley | Keyless Pulley | Keyless Pulley | Timing Pulleys | Timing Pulleys | Timing Pulleys | Idlers with Teeth | Idlers with Teeth | Timing Pulleys | Timing Pulleys | Keyless Pulley | Idlers with Teeth | Idlers | Timing Pulleys | Timing Pulleys | Keyless Pulley | Timing Pulleys | Timing Pulleys |
| Belt Shape | MR2(for PowerGrip® GT®3) | MR3(for PowerGrip® GT®3) | T10 | AT5 ～ AT10 | L | T5 | 2GT | H | 5GT | S3M | XL | S8M | MXL | S5M | T10 | L | S8M | P2M ～ P3M | P5M | T2.5 | S8M | S8M | T5 ～ T10 | S3M | S5M | MR5(for PowerGrip® GT®3) | XL | H | S5M | T10 | XL | 3GT | 8YU | H ～ L | S2M ～ S3M | S2M | S3M ～ S8M | L | AT5 ～ AT10 | - | L | S8M | T5 | H | H ～ XL |
| Belt Width Used(Inch)(Inch) | - | - | - | 10 ～ 25 | 0.5 in (1/2") ～ 1.50 in (1-1/2'') | - | - | 0.75 in (3/4") ～ 2.00 in (2") | - | - | 0.25 in (1/4") ～ 0.5 in (1/2") | - | 0.18 in (3/16") ～ 0.5 in (1/2") | - | - | 0.5 in (1/2") ～ 1.00 in (1") | - | - | - | - | - | - | - | - | - | - | 0.5 in (1/2") | 0.75 in (3/4") ～ 2.00 in (2") | - | - | 0.25 in (1/4") ～ 0.5 in (1/2") | - | - | 0.5 in (1/2") ～ 2.00 in (2") | - | - | - | 0.5 in (1/2") ～ 1.50 in (1-1/2'') | - | 0.25 in (1/4") ～ 2.00 in (2") | 0.5 ～ 1 | - | - | 1.00 in (1") ～ 2.00 in (2") | 0.25 in (1/4") ～ 2.00 in (2") |
| Belt Width Used(mm)(mm) | 6 ～ 9 | 6 ～ 15 | 15 ～ 50 | 10 ～ 25 | 12.7 ～ 38.1 | 10 ～ 25 | 4 ～ 9 | 19.1 ～ 76.2 | 9 ～ 15 | 6 ～ 15 | 6.4 ～ 12.7 | 15 ～ 40 | 4.8 ～ 12.7 | 10 ～ 25 | 15 ～ 50 | - | 15 ～ 40 | 6 ～ 15 | 10 ～ 15 | 7 | 15 ～ 40 | 15 ～ 40 | 10 ～ 50 | 10 ～ 15 | 10 ～ 25 | 15 ～ 25 | 12.7 | 19.1 ～ 50.8 | 10 ～ 25 | 15 ～ 50 | - | 6 ～ 15 | 15 ～ 25 | 12.7 ～ 50.8 | 4 ～ 15 | 4 ～ 10 | 6 ～ 25 | 12.7 ～ 38.1 | 10 ～ 25 | 4 ～ 50.8 | 12.7 ～ 25.4 | 15 ～ 60 | 10 ～ 25 | - | - |
| Number of Teeth(T) | 13 ～ 72 | 16 ～ 72 | 12 ～ 60 | 14 ～ 60 | 10 ～ 72 | 12 ～ 60 | 14 ～ 60 | 14 ～ 72 | 14 ～ 60 | 14 ～ 72 | 10 ～ 72 | 18 ～ 72 | 14 ～ 72 | 14 ～ 72 | 15 ～ 60 | 10 ～ 72 | 18 ～ 72 | 10 ～ 60 | 12 ～ 72 | 14 ～ 60 | 18 ～ 60 | 19 ～ 72 | 16 ～ 30 | 34 ～ 72 | 22 ～ 72 | 18 ～ 72 | 20 ～ 72 | 14 ～ 50 | 20 ～ 72 | 16 ～ 60 | 10 ～ 72 | 16 ～ 60 | 20 ～ 60 | 14 ～ 30 | 20 ～ 60 | 14 ～ 72 | 20 ～ 60 | 14 ～ 72 | 16 ～ 30 | - | 32 ～ 44 | 30 ～ 96 | 22 ～ 60 | 14 ～ 72 | 16 ～ 40 |
| Pulley Shape | Shape A / Shape B / C Type | Shape A / Shape B / C Type | Shape A / Shape B / Shape E / Shape F | Shape A / Shape B | Shape A / Shape B / W Type | Shape A / Shape B | Shape A / Shape B | Shape A / Shape B / W Type | Shape A / Shape B | Shape A / Shape B / C Type | Shape A / Shape B | Shape A / Shape B | Shape A / Shape B / C Type | Shape A / Shape B | Shape E / Shape F | Shape A / Shape B | Shape E / Shape F | Shape B / C Type | Shape A / Shape B | Shape B / C Type | Shape A / Shape B | Shape E / Shape F | - | Shape E / Shape F | Shape E / Shape F | Shape A / Shape B | Shape E / Shape F | Shape E / Shape F | Shape E / Shape F | Shape E / Shape F | Shape A / Shape B | Shape A / Shape B | Shape A / Shape B | - | - | Shape A / Shape B / C Type | - | Shape E / Shape F | - | - | Shape A / Shape B | Shape A / Shape B / W Type | Shape E / Shape F | Shape A / Shape B | - |
| Material | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum ～ Steel | Aluminum | Aluminum ～ Steel | Aluminum | Aluminum ～ Steel | Aluminum | Aluminum | - | Steel | Aluminum | Aluminum ～ Steel | Aluminum ～ Steel |
| Surface Treatment | Black Anodize ～ Not Provided | Black Anodize ～ Not Provided | Black Anodize ～ Not Provided | Black Anodize ～ Hard Clear Anodize | Black Anodize ～ Not Provided | Black Anodize ～ Not Provided | Clear Anodize | Black Anodize ～ Not Provided | Black Oxide Coating ～ Not Provided | Black Anodize ～ Not Provided | Black Anodize ～ Not Provided | Black Anodize ～ Not Provided | Black Anodize ～ Not Provided | Black Anodize ～ Not Provided | Black Oxide Coating ～ Hard Clear Anodize | Black Oxide Coating ～ Clear Anodize | Black Oxide Coating ～ Hard Clear Anodize | Black Oxide Coating ～ Electroless Nickel Plating | Black Anodize ～ Hard Clear Anodize | Clear Anodize | Black Oxide Coating ～ Not Provided | Black Oxide Coating ～ Not Provided | Clear Anodize | Black Oxide Coating ～ Hard Clear Anodize | Black Oxide Coating ～ Hard Clear Anodize | Black Anodize ～ Not Provided | Black Oxide Coating ～ Clear Anodize | Black Oxide Coating ～ Electroless Nickel Plating | Black Oxide Coating ～ Not Provided | Clear Anodize ～ Not Provided | Clear Anodize | Black Oxide Coating ～ Not Provided | Black Oxide Coating ～ Not Provided | Black Oxide Coating ～ Hard Clear Anodize | Clear Anodize ～ Hard Clear Anodize | Black Anodize ～ Not Provided | Clear Anodize | Black Oxide Coating ～ Hard Clear Anodize | Clear Anodize ～ Hard Clear Anodize | Clear Anodize | Not Provided | Not Provided | Clear Anodize ～ Hard Clear Anodize | Black Oxide Coating ～ Clear Anodize | Clear Anodize ～ Electroless Nickel Plating |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Belt Shape
-
Metric / Inch
-
Belt Width Used
Belt Width Used(Inch)(Inch)
- 0.18 in (3/16")
- 0.19 in (3/16")
- 0.25 in (1/4")
- 0.31 in (5/16")
- 0.37
- 0.37 in (3/8")
- 0.5
- 0.5 in (1/2")
- 0.75
- 0.75 in (3/4")
- 1
- 1.00 in (1")
- 1.5
- 1.50 in (1-1/2'')
- 2
- 2.00 in (2")
- 10
- 15
- 20
- 25
-
Belt Width Used
Belt Width Used(mm)(mm)
-
Number of Teeth(T)
-
Pulley Shape
-
Material
-
Surface Treatment
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
- 13 Days or Less
- 14 Days or Less
- 15 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy