(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
SEE4LA Long High-Helix End Mill, 4-Flute, OK Coated
OKAZAKI
The high helical groove of the long blade enables a wide range of side milling and machining of deep sections.
Days to Ship: | 12 Days or more |
---|
SED2 Square End Mill, 2-Flute, Non-Coated
OKAZAKI
An end mill with an abundant range of blade diameters which can be used for machining non-ferrous materials through to steel.
Days to Ship: | 9 Days or more |
---|
SED2LA Long Square End Mill, 2-Flute, OK Coated
OKAZAKI
A long type which allows for deep engraving.
Days to Ship: | 12 Days or more |
---|
SPSED2A SP Series Square End Mill 2-Flute OK Coated
OKAZAKI
A 2-flute OK coated end mill which can be used for a wide range of machining applications, from raw materials to stainless steel.
Days to Ship: | 8 Days or more |
---|
BED2 Brazed Square End Mill, 2-Flute, Non-Coated
OKAZAKI
Ultrafine particle tip (Z-10) enables a wide range of machining from cast iron to steel.
Days to Ship: | 12 Days or more |
---|
BPD4 Brazed Square End Mill, 4-Flute, Non-Coated
OKAZAKI
Ultrafine particle tip (Z-10) enables a wide range of machining from cast iron to steel.
Days to Ship: | 12 Days or more |
---|
BED2L Brazed Long Square End Mill, 2-Flute, Non-Coated
OKAZAKI
Ultrafine particle tip (Z-10) enables a wide range of machining from cast iron to steel.
Days to Ship: | 12 Days or more |
---|
BPD4L Brazed Long Square End Mill, 4-Flute, Non-Coated
OKAZAKI
Ultrafine particle tip (Z-10) enables a wide range of machining from cast iron to steel.
Days to Ship: | 12 Days or more |
---|
BPD4U Brazed Extra-Long Square End Mill, 4-Flute, Non-Coated
OKAZAKI
Ultrafine particle tip (Z-10) enables a wide range of machining from cast iron to steel.
Days to Ship: | 12 Days or more |
---|
SAD2 Square End Mill for Aluminum, 2-Flute, Non-Coated
OKAZAKI
Endmill for aluminum with sharp corners and a blade for aluminum.
Days to Ship: | 12 Days or more |
---|
SAD2D Square End Mill for Aluminum, 2-Flute, Pure DLC-Coated
OKAZAKI
The weld prevention effect of the pure DLC coating provides an astonishingly long service life.
Days to Ship: | 12 Days or more |
---|
SAE3 High-Helix End Mill for Aluminum, 3-Flute, Non-Coated
OKAZAKI
High torsion type 3-flute endmill for aluminum with sharp corners and a blade for aluminum.
Days to Ship: | 10 Days or more |
---|
SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated
OKAZAKI
The weld prevention effect of the pure DLC coating provides an astonishingly long service life.
Days to Ship: | 10 Days or more |
---|
SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated
OKAZAKI
A long shank type, it also features neck relief, enabling deep engraving operation.
Days to Ship: | 12 Days or more |
---|
SAE3LD Long High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated
OKAZAKI
Long high helical endmill for aluminum, 3-flute, pure DLC coating
Days to Ship: | 12 Days or more |
---|
SED2L Long Square End Mill, 2-Flute, Non-Coated
OKAZAKI
A long type which allows for deep engraving.
Days to Ship: | 8 Days or more |
---|
SED2M Medium Square End Mill, 2-Flute, Non-Coated
OKAZAKI
A 2-flute OK coated end mill with semi-long flutes which enable use in slightly deeper machining work.
Days to Ship: | 12 Days or more |
---|
SED2MA Medium Square End Mill, 2-Flute, OK Coated
OKAZAKI
A 2-flute OK coated end mill with semi-long flutes which enable use in slightly deeper machining work.
Days to Ship: | 12 Days or more |
---|
SED4 Square End Mill, 4-Flute, Non-Coated
OKAZAKI
An end mill with an abundant range of blade diameters which can be used for machining non-ferrous materials through to steel.
Days to Ship: | 9 Days or more |
---|
SED4A Square End Mill, 4-Flute, OK Coated
OKAZAKI
A 4-flute OK coated end mill which can be used for a wide range of machining applications, from raw materials to stainless steel.
Days to Ship: | 8 Days or more |
---|
SED4MA Medium Square End Mill, 4-Flute, OK Coated
OKAZAKI
A 4-flute OK coated end mill with semi-long flutes which enable use in slightly deeper machining work.
Days to Ship: | 12 Days or more |
---|
SEE3 High-Helix End Mill, 3-Flute, Non-Coated
OKAZAKI
3-flute type with high-torsion grooves enables everything from rough machining to finishing
Days to Ship: | 12 Days or more |
---|
SEE4 High-Helix End Mill, 4-Flute, Non-Coated
OKAZAKI
An end mill with a high-torsion blade that reduces cutting resistance, which can be used for machining non-ferrous materials through to steel.
Days to Ship: | 12 Days or more |
---|
SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated
OKAZAKI
End mill with a unique reinforced blade type that enables heavy duty cutting and high speed machining. The OK hard coating enables machining of high-hardness materials
Days to Ship: | 12 Days or more |
---|
SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated
OKAZAKI
The high helical groove of the long blade enables a wide range of side milling and machining of deep sections.
Days to Ship: | 9 Days or more |
---|
SEE4TL Reverse High-Helix End Mill, 4-Flute, Non-Coated
OKAZAKI
The reverse step design allows the protruding length to be freely adjusted.
Days to Ship: | 12 Days or more |
---|
SEE4TLA Reverse High-Helix End Mill, 4-Flute, OK Coated
OKAZAKI
The reverse step design eliminates shank interference when performing mold pocket processing.
Days to Ship: | 12 Days or more |
---|
SHE Regular Shank Hard Square End Mill, 6-Flute, OK Hard Coated
OKAZAKI
Unique blade type and OK hard coating enable high speed machining of high hardness materials up to 65 HRC.
Days to Ship: | 12 Days or more |
---|
SHE6LH Long Shank Hard Square End Mill, 6-Flute, OK Hard Coated
OKAZAKI
Long shank type that allows machining in deep sections. Achieves machining of hardened steel up to 65 HRC due to the OK hard coating.
Days to Ship: | 12 Days or more |
---|
SPSED4A SP Series Square End Mill 4-Flute OK Coated
OKAZAKI
A 4-flute OK coated end mill which can be used for a wide range of machining applications, from raw materials to stainless steel.
Days to Ship: | 8 Days or more |
---|
SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated
OKAZAKI
A multi-purpose 3-flute high torsion end mill with support from rough machining to finish machining.
Days to Ship: | 8 Days or more |
---|
SPSEE4A SP Series High Helix End Mill 4-Flute OK Coated
OKAZAKI
It is a high-torsion blade that reduces cutting resistance, realizing a finished surface with low tilt.
Days to Ship: | 9 Days or more |
---|
SPSRC4A SP Series Roughing End Mill 4-Flute OK Coat
OKAZAKI
Its unique roughing shape and the effect of OK coating enable heavy cutting and high speed machining.
Days to Ship: | 8 Days or more |
---|
SRE3 Roughing End Mill for Aluminum, 3-Flute, Non-Coated
OKAZAKI
High torsion roughing endmill ideal for roughing aluminum material.
Days to Ship: | 12 Days or more |
---|
SRE3D Roughing End Mill for Aluminum, 3-Flute, Pure DLC-Coated
OKAZAKI
The weld prevention effect of the pure DLC coating provides an astonishingly long service life.
Days to Ship: | 12 Days or more |
---|
SPSEE3ZA Vertical-Feed, Strengthened SP Series Roughing Mill 3 Flutes / OK Coated
OKAZAKI
A non-stepped vertical feed reinforced end mill that enables vertical feeding going straight on to grooving.
Days to Ship: | 8 Days or more |
---|
SPSEE4GA Heavy-Duty Cutting SP Series Steel Power Mill 4 Flutes / OK Coated
OKAZAKI
End mill with a unique reinforced blade type with good chip discharge properties that enables heavy duty cutting and high speed machining.
Days to Ship: | 10 Days or more |
---|
SPSRD3ZA Vertical-Feed, Strengthened, Roughing SP Series Roughing Mill 3 Flutes / OK Coated
OKAZAKI
A multi-purpose roughing end mill with the enhanced vertical feed performance of the Zakkuri Mill.
Days to Ship: | 10 Days or more |
---|
SEE4VH Damper Mill OK Hard Coated 4 Flutes
OKAZAKI
Endmill with a variable division shape which greatly reduces chattering. The OK hard coating enables machining of high-hardness materials.
Days to Ship: | 12 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Flute Diameter (D)(φ) |
Work Material |
Flute Length (ℓ)(mm) |
Number of Flutes(sheet) |
Model |
Coating |
Link Diameter (d)(mm) |
Overall Length (L)(mm) |
Length Under Neck (ℓ1)(mm) |
Processing Applications |
Flute Shape |
Helix Angle (θ) |
Brand | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | BPD4U Brazed Extra-Long Square End Mill, 4-Flute, Non-Coated | SAD2D Square End Mill for Aluminum, 2-Flute, Pure DLC-Coated | SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated | SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated | SAE3LD Long High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated | SHE Regular Shank Hard Square End Mill, 6-Flute, OK Hard Coated | SHE6LH Long Shank Hard Square End Mill, 6-Flute, OK Hard Coated | SRE3D Roughing End Mill for Aluminum, 3-Flute, Pure DLC-Coated | SPSEE3ZA Vertical-Feed, Strengthened SP Series Roughing Mill 3 Flutes / OK Coated | SPSEE4GA Heavy-Duty Cutting SP Series Steel Power Mill 4 Flutes / OK Coated | SPSRD3ZA Vertical-Feed, Strengthened, Roughing SP Series Roughing Mill 3 Flutes / OK Coated | ||||||||||||||||||||||||||||
Days to Ship | 12 Days or more | 9 Days or more | 12 Days or more | 8 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 10 Days or more | 10 Days or more | 12 Days or more | 12 Days or more | 8 Days or more | 12 Days or more | 12 Days or more | 9 Days or more | 8 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 9 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 12 Days or more | 12 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 12 Days or more |
Flute Diameter (D)(φ) | 3 ~ 20 | 0.4 ~ 32 | 3 ~ 20 | 1 ~ 25 | 20 ~ 50 | 20 ~ 50 | 20 ~ 50 | 20 ~ 50 | 20 ~ 50 | 1 ~ 12 | 1 ~ 12 | 3 ~ 20 | 3 ~ 20 | 3 ~ 20 | 3 ~ 20 | 3 ~ 20 | 1 ~ 12 | 1 ~ 12 | 2 ~ 32 | 2 ~ 32 | 3 ~ 12 | 3 ~ 20 | 3 ~ 25 | 3 ~ 20 | 3 ~ 20 | 5 ~ 22 | 7 ~ 22 | 6 ~ 20 | 6 ~ 20 | 5 ~ 12 | 3 ~ 20 | 3 ~ 25 | 5 ~ 25 | 6 ~ 20 | 6 ~ 20 | 2 ~ 20 | 3 ~ 20 | 5 ~ 20 | 3 ~ 20 |
Work Material | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[◎] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[◎] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○/◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[◎] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] | Heat-Treated Steel[○] |
Flute Length (ℓ)(mm) | 15 ~ 80 | 1 ~ 55 | 15 ~ 80 | 2.5 ~ 45 | 32 ~ 63 | 32 ~ 63 | 55 ~ 125 | 55 ~ 125 | 85 ~ 150 | 3 ~ 32 | 3 ~ 32 | 10 ~ 45 | 10 ~ 45 | 10 ~ 45 | 10 ~ 45 | 15 ~ 80 | 4 ~ 36 | 4 ~ 36 | 6 ~ 55 | 6 ~ 55 | 12 ~ 36 | 10 ~ 45 | 10 ~ 50 | 10 ~ 45 | 15 ~ 80 | 8 ~ 32 | 12 ~ 32 | 15 ~ 45 | 15 ~ 45 | 15 ~ 25 | 10 ~ 45 | 10 ~ 50 | 12 ~ 45 | 15 ~ 45 | 15 ~ 45 | 4 ~ 40 | 10 ~ 45 | 12 ~ 40 | 10 ~ 45 |
Number of Flutes(sheet) | 4 | 2 | 2 | 2 | 2 | 4 | 2 | 4 | 4 | 2 | 2 | 3 | 3 | 3 | 3 | 2 | 2 | 2 | 4 | 4 | 4 | 3 | 4 | 4 | 4 | 4 | 4 | 6 | 6 | 4 | 3 | 4 | 4 | 3 | 3 | 3 | 4 | 3 | 4 |
Model | Highly-Helical | Square | Long Neck Square | Square | Square | Square | Long Neck Square | Long Neck Square | Long Neck Square | Square | Square | Highly-Helical | Highly-Helical | Highly-Helical | Highly-Helical | Long Neck Square | Square | Square | Square | Square | Square | Highly-Helical | Highly-Helical | Highly-Helical | Highly-Helical | Highly-Helical | Highly-Helical | Square | Square | Square | Highly-Helical | Highly-Helical | Roughing | Roughing | Roughing | Square | Square | Roughing | Square |
Coating | TiAlN | Non-Coated | TiAlN | TiAlN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | DLC | Non-Coated | DLC | Non-Coated | DLC | Non-Coated | Non-Coated | TiAlN | Non-Coated | TiAlN | TiAlN | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) | Non-Coated | Non-Coated | TiAlN | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | DLC | TiAlN | TiAlN | TiAlN | For High Hardness (Silicone-Based) |
Link Diameter (d)(mm) | 6 ~ 20 | 4 ~ 32 | 6 ~ 20 | 4 ~ 25 | 20 ~ 42 | 20 ~ 42 | 20 ~ 42 | 20 ~ 42 | 25 ~ 42 | 4 ~ 12 | 4 ~ 12 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 4 ~ 12 | 4 ~ 12 | 4 ~ 32 | 4 ~ 32 | 6 ~ 12 | 6 ~ 20 | 6 ~ 25 | 6 ~ 20 | 6 ~ 20 | 4 ~ 20 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 6 ~ 12 | 6 ~ 20 | 6 ~ 25 | 4 ~ 25 | 6 ~ 20 | 6 ~ 20 | 4 ~ 20 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 |
Overall Length (L)(mm) | 70 ~ 150 | 45 ~ 130 | 70 ~ 150 | 45 ~ 120 | 115 ~ 160 | 115 ~ 160 | 140 ~ 240 | 140 ~ 240 | 185 ~ 265 | 45 ~ 75 | 45 ~ 75 | 45 ~ 105 | 45 ~ 105 | 70 ~ 800 | 70 ~ 800 | 70 ~ 150 | 45 ~ 75 | 45 ~ 75 | 45 ~ 130 | 45 ~ 130 | 45 ~ 75 | 45 ~ 105 | 45 ~ 120 | 45 ~ 105 | 70 ~ 150 | 70 ~ 150 | 80 ~ 150 | 50 ~ 105 | 80 ~ 150 | 50 ~ 75 | 45 ~ 105 | 45 ~ 120 | 50 ~ 120 | 50 ~ 105 | 50 ~ 105 | 45 ~ 105 | 45 ~ 105 | 50 ~ 105 | 45 ~ 105 |
Length Under Neck (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | 15 ~ 80 | 15 ~ 80 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 15 ~ 36 | 13 ~ 55 |
Processing Applications | Flat Surface / Side Surface / Countersunk | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Groove | Flat Surface / Groove | Flat Surface / Side Surface | Flat Surface / Groove | Flat Surface / Side Surface | Flat Surface / Side Surface | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface | Flat Surface / Side Surface | Flat Surface / Side Surface | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Countersunk | Flat Surface / Side Surface / Countersunk | Flat Surface / Side Surface / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Countersunk | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Side Surface / Groove | Side Surface / Groove | Side Surface / Groove | Side Surface / Groove |
Flute Shape | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | C Surface | C Surface | C Surface | C Surface | C Surface | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | C Surface | C Surface | C Surface | - | - | - | - |
Helix Angle (θ) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy