Lathe Jigs

• • New Products

  

  Soft Jaw　　【3 Pieces Per Package】

  MISUMI

  Now offering a wide range of soft jaws to fit Kitagawa and Howa chucks (C-Value)

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Lathe Jigs - 3-Jaw Scroll Chuck, Split Jaw Type, TCF

  KOBAYASHITEKKO

  [Features]
  · High precision versatile type allowing the use of both hard and soft jaws.
  · It can be mounted easily on a lathe / index head table by front mounting.

  • Volume Discount

  Days to Ship:	12 Days or more

• 

  Soft Jaw (for Kitagawa)【3 Pieces Per Package】

  Trusco Nakayama

  [Features]
  · S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Workpiece Driving Center DK Type Fixed Jaw

  FUTAMURAKIKI

  •Feature: Great for cog machining, spline machining, key groove machining, and woodworking. A chuck is not needed when using this machine. It is best to finish the workpiece at both centers in order to hold the workpiece. The workpiece can be easily

  • Volume Discount

  Days to Ship:	14 Days or more

• 

  Tork-Loc Collet, Short

  TEIKOKU CHUCK

  •Type: For Light Cutting and Grinding Work Only
  •Note: A collet in the overlap range. If possible, use a collet one rank higher.

  • Volume Discount

  Days to Ship:	9 Days or more

• 

  Soft Jaw (for Soul)【3 Pieces Per Package】

  Trusco Nakayama

  [Features]
  · S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Rolling Center NCF

  FUTAMURAKIKI

  •Feature: Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechani
  •Deflection of Center (Max.): TIR0.003

  • Volume Discount

  Days to Ship:	11 Days or more

• 

  Workpiece Driving Center Adapter

  FUTAMURAKIKI

  •Feature: To ensure simple use in NC machines, etc., the outer diameter (grip part) is straight. If using a workpiece driving center, there is no need to disconnect the chuck, and the chuck can be gripped by the soft jaw on the outer diameter of the

  • Volume Discount

  Days to Ship:	12 Days or more

• 

  Lathe Jigs - Rotating Tailstock Center, Umbrella-Shaped, LCU Series

  TAKURAKOGU

  [Features]
  · The diameter of the shank base was increased and can be removed using the forcing nut equipped on the tailstock

  • Volume Discount

  Days to Ship:	10 Days or more

• • New Products

  

  Soft Jaw for Scroll Chucks【3 Pieces Per Package】

  MISUMI

  Now offering a lineup of models to fit Kitagawa chucks (C-Value)

  • Volume Discount

  Days to Ship:	8 Days or more

• • New Products

  

  Soft Jaw, Circle Jaw【3 Pieces Per Package】

  MISUMI

  Now offering a lineup of models to fit Kitagawa chucks (C-Value)

  • Volume Discount

  Days to Ship:	8 Days or more

• • New Products

  

  Nut Jaw【3 Pieces Per Package】

  MISUMI

  Now offering a lineup of models to fit Kitagawa chucks (C-Value)

  • Volume Discount

  Days to Ship:	8 Days or more

• • New Products

  

  Soft Jaw Processing Jig

  MISUMI

  Non-quenched to facilitate processing according to workpiece diameter. Available at an affordable price. (C-Value)

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Firm Shaving Chuck (Points Only)【3 Pieces Per Package】

  NEWSTRONG

  4-piece set
  For complete product overview and details on Firm Shaving Chuck (Points Only) see the sections below:

  • Volume Discount

  Days to Ship:	9 Days or more

• 

  Chuck Mate

  KAWASHIMO

  •Feature: Soft jaw forming setup is done within 1 minute. Processing also completes in a short time. Even inexperienced people can do centering with single-action. Core runout accuracy is within 10 microns. Caliper measurements can be made without i
  •Application: For soft jaw molding holder with chucked workpieces.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Lever Chuck

  KOBAYASHITEKKO

  [Features]
  · Ultracompact, thin and light weight.
  [Applications]
  · From desk lathes to drilling machines, compact milling machines and measuring instruments.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Lathe Jigs - 3-Jaw Scroll Chuck, Integrated Jaw Type, SCF

  KOBAYASHITEKKO

  [Features]
  · This claw is treated with high hardness heat treatment for excellent durability.
  · Internal and external jaws can be exchanged and used for outstanding economy.

  • Volume Discount

  Days to Ship:	13 Days or more

• 

  3-Jaw Scroll Chuck (Integrated Jaw Type/Heavy-Duty)

  KITAGAWATEKKO

  •Feature: The claw restricts wavering and loosening even when rotated at high speeds while employing a strengthened cross guide for grip power. Exchangeable with inner or outer claws, this product has excellent durability and is economical.
  •Specification: Integrated hard jaw type with manual clamping handle

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Lathe Jigs - 3-Jaw Scroll Chuck, Split Jaw Type, JNT

  KITAGAWATEKKO

  •Feature: The claw restricts wavering and loosening even when rotated at high speeds while employing a strengthened cross guide for grip power. Usable with hardened or plain claws, this product has excellent durability and is economical.
  •Specification: Separated jaw type with manual clamping handle (with hard jaw / soft jaw)

  • Volume Discount

  Days to Ship:	9 Days or more

• 

  HO1MA Soft Jaw (for HOWA)【2-3 Pieces Per Package】

  Trusco Nakayama

  [Features]
  · S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  High Jaw (for Both Howa and Kitagawa)【3 Pieces Per Package】

  Trusco Nakayama

  [Features]
  · S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Soft Jaw (for Nikko)【1-3 Pieces Per Package】

  Trusco Nakayama

  [Features]
  · S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Soft Jaw (for Victor)【3 Pieces Per Package】

  Trusco Nakayama

  [Features]
  · S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Soft Jaw (for Matsumoto)【3 Pieces Per Package】

  Trusco Nakayama

  [Features]
  · S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Race Center Carbide Included

  FUTAMURAKIKI

  •Feature: Used in various machineries, cylindrical grinders.

  • Volume Discount

  Days to Ship:	14 Days or more

• 

  Rolling Center NC70

  FUTAMURAKIKI

  •Feature: Designed with a focus on high precision (TIR 0.003). Ultra high speed rotation allows for the inclusion of a carbide tip on the grind-resistant end portion. (Type A) 2 types of bearings, angular bearings (3) and needle bearings, are assemb
  •Maximum Number Of Rotation (per minute): 7000
  •Deflection of Center (Max.): TIR0.003

  • Volume Discount

  Days to Ship:	15 Days or more

• 

  Rolling Center NCF-N

  FUTAMURAKIKI

  •Feature: The cold punched nut is attached to the rear portion of the main body, making it possible to remove it from the front portion of the tailstock. Combination angular bearings (3 pcs) and a needle bearing are used inside the main unit, making
  •Maximum Number Of Rotation (per minute): 5500
  •Deflection of Center (Max.): TIR0.003

  • Volume Discount

  Days to Ship:	14 Days or more

• 

  Rolling Center SR

  FUTAMURAKIKI

  •Type: With Seal
  •Feature: The elongation of the workpiece due to the processing heat generated during cutting is absorbed by the built-in disc spring provided in the center, so there is no distortion of the workpiece, which improves finishing accuracy. It is design
  •Deflection of Center (Max.): TIR0.010

  • Volume Discount

  Days to Ship:	14 Days or more

• 

  Rolling Center 100

  FUTAMURAKIKI

  •Feature: -17A is a thin type and is ideal for thread cutting and end face processing. This machine is designed with a small body diameter, and uses two needle bearings and three thrust bearings. Since the body head is within an angle of 60° from th
  •Deflection of Center (Max.): TIR0.005

  • Volume Discount

  Days to Ship:	14 Days or more

• 

  Rolling Center with 100 Seals

  FUTAMURAKIKI

  •Feature: -17A is a thin type and is ideal for thread cutting and end face processing. This machine is designed with a small body diameter, and uses two needle bearings and three thrust bearings. Since the body head is within an angle of 60° from th
  •Deflection of Center (Max.): TIR0.005

  • Volume Discount

  Days to Ship:	14 Days or more

• 

  Rolling Center HB

  FUTAMURAKIKI

  •Type: With Seal
  •Feature: Large bearings are used and the main unit outer diameter and sensor shaft diameter have been made thick in order to withstand larger loads than the standard type. Made to order products, φ80-1/10, φ80-1/20 (metric), φ100-1/20 (metric) can

  • Volume Discount

  Days to Ship:	15 Days or more

• 

  Rolling Center RST

  FUTAMURAKIKI

  •Dimension e (mm): -
  •Dimension B1 (mm): -
  •Feature: Heavy cutting, general cutting optimum product, maximum rotation speed (No. 3 to No. 5) 2,500 min - 1 Inside this machine, M.T No. 1 and No. 2 are 2 ball bearings and 1 thrust bearing. M. T No. 3 to No. 7 use one each of three kinds: taper

  • Volume Discount

  Days to Ship:	14 Days or more

• 

  Rolling Center with RST Carbide

  FUTAMURAKIKI

  •Dimension e (mm): -
  •Dimension B1 (mm): -
  •Feature: External appearance, shape, and structure are the same as those of the RST type. However, the carbide alloy chip is brazed to the tip of the center. With a carbide alloy chip at the tip, demonstrates excellent wear-resistance and abrasion-

  • Volume Discount

  Days to Ship:	14 Days or more

• 

  Work Driving Center HD

  FUTAMURAKIKI

  •Feature: Specify rotation direction . The HD-15R / L and HD-21R / L have a common body / head. The HD-27R / L has the same main body.
  •Deflection of Center (Max.): TIR 0.01

  • Volume Discount

  Days to Ship:	14 Days or more

• 

  Workpiece Driving Center HD Type Replacement Jaw

  FUTAMURAKIKI

  •Feature: Workpiece driving center jaw should be replaced with spare before use if worn or damaged. To purchase a replacement jaw, check the direction of rotation (type) of the installed machine when placing your order.

  • Volume Discount

  Days to Ship:	15 Days or more

• 

  Umbrella-Shaped Rotation Center BRC

  FUTAMURAKIKI

  •θ: 80°
  •Type: With Seal
  •Feature: Used with a lathe or a cylindrical grinder. Can be used as a center push tool for machining pipe-shaped, ring-shaped, or thin objects. The inside of the main machine uses a tapered roller bearing, thrust bearing, and ball bearing, 1 each o

  • Volume Discount

  Days to Ship:	14 Days or more

• 

  Carbide Lathe Center

  TAKURAKOGU

  [Features]
  · With carbide tip, used with lathes to eliminate runout in machined products

  • Volume Discount

  Days to Ship:	7 Days or more

• 

  Live Center A Type

  TAKURAKOGU

  [Features]
  · Fully quenched and polished, HRC 60-63.
  · The head drive mechanism, created from many years of experience, prevents the ingress of fine cutting powder and cutting fluid (bearing has long service life).
  · The rotation speed is up to 3,000 min-1 for MT-2, MT-3, and MT-4, 2,000 min-1 for MT-5, and 1,000 min-1 for MT-6.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  S Type Live Center (for High Speed)

  TAKURAKOGU

  [Features]
  · This rolling center is a live center which appropriately arranges ball bearing (mainly needle bearings) for a compact external shape with high load capacity, high rigidity and wide working range.
  · Components are designed to withstand rough use from high speed to low speed, processed with technologies from many years of tooling manufacturing for excellent compatibility and wear resistance.

  • Volume Discount

  Days to Ship:	9 Days or more

• 

  Die Holder for Lathes (SET)

  TAKURAKOGU

  [Features]
  · The die holder can be used as a multipurpose holder, drill stand or tap stand, etc.

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Rotating Center

  NSK

  [Features]
  · Since the run-out of center spindle tapered part is 5 µm or less, tapered roller bearings, thrust ball bearings, and needle bearings have been used.
  [Applications]
  · Workpiece support and runout prevention.

  • Volume Discount

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Lathe Center

  Trusco Nakayama

  [Features]
  · It is all pure steel.
  [Applications]
  · Prevents runout of workpiece.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Lathe Center (Extra-Hard Tip)

  Trusco Nakayama

  [Features]
  · Carbide tip included.
  [Applications]
  · Prevents runout of workpiece.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Lathe Center (Long Type, with Extra-Hard Tip)

  Trusco Nakayama

  [Features]
  · By making the lathe center longer, the distance between the workpiece and tailstock became wider, improving the work efficiency.
  [Applications]
  · Prevents runout of workpiece.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  "Half Center" (with Carbide Tip)

  Trusco Nakayama

  [Features]
  · The tip of the lathe center has been cut so as not to touch the workpiece.
  [Applications]
  · Prevents center deflection.

  • Volume Discount

  Days to Ship:	8 Days or more

Loading...