(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Roughing End Mills (Carbide)
| Days to Ship |
|
|---|
-
TSC Series Carbide Roughing End Mill, Fine Pitch/Short Model
MISUMI
Achieves long life and high-speed machining at the same time
- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more -
XAC Series Carbide Roughing End Mill, Fine Pitch/Regular Model
MISUMI
Strongly compatible with the cost reduction of roughing with the limited special price for standard sizes [C-Value]
- Volume Discount
- TiAlN
- General Steel
- R (Regular)
Days to Ship: Same day or more Show Stock Products
-
DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute/Regular Model
MISUMI
Popular DLC coated type of aluminum roughing
- Volume Discount
- DLC
- Aluminum
- 3 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
SAGCα SA Coated Carbide α Nick
S&K
[Features]
· With a unique roughing blade shape, heavy machining and high speed machining are possible- Volume Discount
Days to Ship: 9 Days or more -
TSC Series Carbide Roughing End Mill, Fine Pitch/Regular Model
MISUMI
The fine pitch achieves excellent surface roughness after machining
- Volume Discount
- TS
- General Steel
- R (Regular)
Days to Ship: 8 Days or more -
TSC Series Carbide Roughing End Mill, Fine Pitch/Long Model
MISUMI
A single unit compatible with both the roughing and medium roughing
- Volume Discount
- TS
- General Steel
- 4 Flutes
- L (Long)
Days to Ship: 8 Days or more -
TSC Series Carbide Roughing End Mill, Fine Pitch/Long Regular Model
MISUMI
A long shank type that's ideal for deep engraving
- Volume Discount
- TS
- General Steel
- R (Regular)
Days to Ship: 8 Days or more -
TSC Series Carbide Roughing End Mill, 45° Spiral/Fine Pitch/Short Model
MISUMI
45° helix roughing that's capable of high-efficiency machining by high-speed rotation
- Volume Discount
- Price Reduction
- TS
- General Steel
- S (Short)
Days to Ship: 8 Days or more -
TSC Series Carbide Roughing End Mill, 45° Spiral/Fine Pitch/Regular Model
MISUMI
45° helix roughing that's capable of high-efficiency machining by high-speed rotation
- Volume Discount
- Price Reduction
- TS
- General Steel
- R (Regular)
Days to Ship: 8 Days or more -
TSC Series Carbide Roughing End Mill, 45° Spiral/Fine Pitch/Long Model
MISUMI
45° helix roughing that's capable of high-efficiency machining by high-speed rotation
- Volume Discount
- TS
- General Steel
- L (Long)
Days to Ship: 8 Days or more -
TS Coated Carbide Roughing End Mill, 45° Spiral/Fine Pitch/Long Shank, Regular Model
MISUMI
45° helix roughing that's capable of high-efficiency machining by high-speed rotation
- Volume Discount
- TS
- General Steel
- R (Regular)
Days to Ship: 8 Days or more -
Carbide Roughing End Mill for Aluminum Machining, 3-Flute/Regular Model
MISUMI
Significantly reduces the roughing time of aluminum
- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
- New Products
VAC Series Carbide Roughing End Mill
MISUMI
Model: Roughing
Processing Application: Thrust (Z-Feed)
Work Material: Stainless Steel
For complete product overview and details on VAC Series Carbide Roughing End Mill see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
Ideal for rough and medium finishing of materials from steel to stainless steel. High performance machining with BT30 machines is possible with little cutting resistance.
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
Capable of high-speed and high-efficiency roughing of materials from steel to stainless steel.
- Volume Discount
Days to Ship: 8 Days or more -
GSX MILL Roughing 2.5D GSXRE-2.5D
Nachi-Fujikoshi
Improved fracture resistance when used at high speeds for high efficiency. The GSX coating further improves heat resistance and abrasion resistance.
- Volume Discount
Days to Ship: 8 Days or more -
DIA-BNC Carbide End Mill, Router Series for CFRP, with Fine Pitch Nick
OSG
A router that adopts a diamond coating with excellent abrasion resistance.
- Volume Discount
Days to Ship: 8 Days or more -
DIA-HBC4 Carbide End Mill, Router Series for CFRP, Herringbone Type (4 Bottom Flutes)
OSG
Standard in-stock item, sold by designated agencies.
[Features]
· A router that adopts a diamond coating with excellent abrasion resistance.
· 4 base blades- Volume Discount
Days to Ship: 8 Days or more -
WX-RESF Series for Carbide Rough Machining, WX Coat Roughing
OSG
As the corrugated blade shape reduces cutting power, large cutting depth is possible. Also resilient to chatter, it is possible to improve the efficiency of roughing.
- Volume Discount
Days to Ship: 8 Days or more -
FAGCNα FA Coated Carbide Nα Nick
S&K
[Features]
· Machining is possible with a wide range of materials, from raw materials to hardened steel.
· New shape and new surface processing provide excellent chipping resistance and chip discharge.
· A new standard considering usability of the blade length is adopted.- Volume Discount
Days to Ship: 9 Days or more -
SAGCVα SA Coated Carbide Victory α Nick
S&K
[Features]
· Machining is possible with a wide range of materials, from raw materials to hardened steel.
· Newly developed nick/cross-section shape provide excellent chipping resistance and chip discharge.- Volume Discount
Days to Ship: 9 Days or more -
ASAHI TOOLS
•Model: Roughing
•Helix Angle (θ): Weak Helix (15 to 25°)
•Flute Shape: C Surface
•Coating: Non-Coated
•Number Of Flutes (sheet): 4- Volume Discount
Days to Ship: 8 Days or more -
ASAHI TOOLS
•Model: Roughing
•Helix Angle (θ): Weak Helix (15 to 25°)
•Flute Shape: C Surface
•Coating: Non-Coated
•Number Of Flutes (sheet): 4- Volume Discount
Days to Ship: 8 Days or more -
ASAHI TOOLS
•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: With Lead
•Coating: TiN
•Blade Diameter Tolerance (mm): 0～-0.05- Volume Discount
Days to Ship: 8 Days or more -
SPSRC4A SP Series Roughing End Mill 4-Flute OK Coat
OKAZAKI
Its unique roughing shape and the effect of OK coating enable heavy cutting and high speed machining.
- Volume Discount
Days to Ship: 8 Days or more -
SRE3 Roughing End Mill for Aluminum, 3-Flute, Non-Coated
OKAZAKI
High torsion roughing endmill ideal for roughing aluminum material.
- Volume Discount
Days to Ship: 12 Days or more -
SRE3D Roughing End Mill for Aluminum, 3-Flute, Pure DLC-Coated
OKAZAKI
The weld prevention effect of the pure DLC coating provides an astonishingly long service life.
- Volume Discount
Days to Ship: 12 Days or more -
Roughing End Mill for Aluminum Machining AL-OCRL Type
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
- Volume Discount
Days to Ship: 9 Days or more -
Roughing End Mill for Aluminum Machining AL-OCRS-LS Type
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
- Volume Discount
Days to Ship: 8 Days or more -
Roughing End Mill for Aluminum Machining AL-OCRS-XLS Type
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
- Volume Discount
Days to Ship: 9 Days or more -
Roughing End Mill for Aluminum Machining AL-OCRS Type
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
- Volume Discount
Days to Ship: 8 Days or more -
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
- Volume Discount
Days to Ship: 9 Days or more -
Roughing End Mill Regular 3-Flute 3127
GUHRING
Roughing endmill dedicated for aluminum.
- Volume Discount
Days to Ship: 10 Days or more -
Roughing End Mill Regular 4-Flute 3723
GUHRING
Supports a wide range of high-speed rough machining from general steel to stainless steel.
- Volume Discount
Days to Ship: 8 Days or more -
Roughing End Mill Regular 4-Flute for High Hardness Steel 3682
GUHRING
Capable of rough machining of hardened materials up to hardness of 56 HRC.
- Volume Discount
Days to Ship: 27 Days or more -
High Chip Flow Performance Wave Shaped Blade for Ruffing 3RDSM, 4RDSM, 5RDSM (Medium)
KYOCERA
•Model: Roughing
•Helix Angle (θ): Weak Helix (15 to 25°)
•Coating: TiAlN
•Number Of Flutes (sheet): 3
•Corner Specification C: 0.3- Volume Discount
Days to Ship: 8 Days or more -
CoroMill Plura, Carbide Solid End Mill Roughing
SANDVIK
Unique shape exhibits high performance
- Volume Discount
Days to Ship: 5 Days or more -
Roughing End Mill for Aluminum Processing, Regular Flute Length with Chamfered Corner AL-OCRS
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
- Volume Discount
Days to Ship: 9 Days or more -
Carbide Solid Fiber Cutter with/without Coating CSFRP
EIKOSHA
[Features]
· Ideal for machining carbon fiber and glass fiber.
· Without base blade.- Volume Discount
Days to Ship: 8 Days or more -
Carbide Solid Fiber Cutter with End Cutting Edge with/without Coating CSFRPE
EIKOSHA
[Features]
· Ideal for machining carbon fiber and glass fiber.
· With base blade.- Volume Discount
Days to Ship: 8 Days or more -
Carbide Silent Roughing End Mill SI-WC-RESF
OSG
[Features]
· Non-uniform split shape of the base blade and unequal lead shape of the outer peripheral blade achieve "quiet but heavy cutting".
· Work material: General steel, tempered steel, stainless steel, cast iron, copper, aluminum, titanium- Volume Discount
Days to Ship: 8 Days or more -
SPSRD3ZA Vertical-Feed, Strengthened, Roughing SP Series Roughing Mill 3 Flutes / OK Coated
OKAZAKI
A multi-purpose roughing end mill with the enhanced vertical feed performance of the Zakkuri Mill.
- Volume Discount
Days to Ship: 10 Days or more -
SPEED/T 3/4 Flute 40° Roughing
Poulten&Graf
•Model: Roughing
•Helix Angle (θ): Standard Helix (30 to 40°)
•Coating: AlTiN
•Torsion Angle (°): 40- Volume Discount
Days to Ship: 10 Days or more -
DIA Coated Twill Cut Router (Multi-Blade / Bar Type)
OSG
[Features]
· CFRP Router Series
[Applications]
· Work Material: Composite Material
[Material]
· Cemented Carbide
Manufacturer Standard Product
Bottom blade shape: Bar type with multiple flutes- Volume Discount
Days to Ship: 8 Days or more -
Ayame Router (Multi-Blade, Bar Type)
OSG
[Features]
· CFRP Router Series
[Applications]
· Work Material: Composite Material
[Material]
· Cemented Carbide- Volume Discount
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Flute Diameter (D)(φ) |
| Work Material |
| Flute Length (ℓ)(mm) |
| Number of Flutes(sheet) |
| Model |
| Coating |
| Link Diameter (d)(mm) |
| Overall Length (L)(mm) |
| Length Under Neck (ℓ1)(mm) |
| Processing Applications |
| Flute Shape |
| Helix Angle (θ) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | S&K | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | OSG | OSG | OSG | S&K | S&K | ASAHI TOOLS | ASAHI TOOLS | ASAHI TOOLS | OKAZAKI | OKAZAKI | OKAZAKI | DIJET | DIJET | DIJET | DIJET | DIJET | GUHRING | GUHRING | GUHRING | KYOCERA | SANDVIK | DIJET | EIKOSHA | EIKOSHA | OSG | OKAZAKI | Poulten&Graf | OSG | OSG |
| Product Series | TSC Series Carbide Roughing End Mill, Fine Pitch/Short Model | XAC Series Carbide Roughing End Mill, Fine Pitch/Regular Model | DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute/Regular Model | TSC Series Carbide Roughing End Mill, Fine Pitch/Regular Model | TSC Series Carbide Roughing End Mill, Fine Pitch/Long Regular Model | TSC Series Carbide Roughing End Mill, 45° Spiral/Fine Pitch/Short Model | TSC Series Carbide Roughing End Mill, 45° Spiral/Fine Pitch/Regular Model | TSC Series Carbide Roughing End Mill, 45° Spiral/Fine Pitch/Long Model | TS Coated Carbide Roughing End Mill, 45° Spiral/Fine Pitch/Long Shank, Regular Model | Carbide Roughing End Mill for Aluminum Machining, 3-Flute/Regular Model | DIA-BNC Carbide End Mill, Router Series for CFRP, with Fine Pitch Nick | DIA-HBC4 Carbide End Mill, Router Series for CFRP, Herringbone Type (4 Bottom Flutes) | WX-RESF Series for Carbide Rough Machining, WX Coat Roughing | SRE3D Roughing End Mill for Aluminum, 3-Flute, Pure DLC-Coated | Roughing End Mill Regular 4-Flute for High Hardness Steel 3682 | High Chip Flow Performance Wave Shaped Blade for Ruffing 3RDSM, 4RDSM, 5RDSM (Medium) | Roughing End Mill for Aluminum Processing, Regular Flute Length with Chamfered Corner AL-OCRS | Carbide Solid Fiber Cutter with End Cutting Edge with/without Coating CSFRPE | SPSRD3ZA Vertical-Feed, Strengthened, Roughing SP Series Roughing Mill 3 Flutes / OK Coated | ||||||||||||||||||||||||||
| Days to Ship | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 12 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 10 Days or more | 8 Days or more | 27 Days or more | 8 Days or more | 5 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||
| Flute Diameter (D)(φ) | 5 ～ 20 | 6 ～ 20 | 5 ～ 20 | 5 ～ 25 | 3 ～ 20 | 6 ～ 20 | 5 ～ 20 | 5 ～ 20 | 3 ～ 20 | 6 ～ 20 | 6 ～ 20 | 5 ～ 20 | 3 ～ 12 | 6 ～ 20 | 6 ～ 20 | 4 ～ 20 | 4 ～ 12 | 6 ～ 10 | 14 ～ 25 | 3 ～ 25 | 5 ～ 20 | 20 ～ 40 | 20 ～ 40 | 3 ～ 20 | 5 ～ 25 | 6 ～ 20 | 6 ～ 20 | 6 ～ 30 | 6 ～ 30 | 6 ～ 20 | 3 ～ 30 | 4 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 20 | 5 ～ 8 | 6 ～ 20 | 6 ～ 25 | 3 ～ 20 | 3 ～ 20 | 6 ～ 12H | 5 ～ 20 | 5 ～ 20 | 6 ～ 10 | 6 ～ 10 |
| Work Material | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Resin[◎] | - | General Steel[○/◎] / Heat-Treated Steel[○/◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○/◎] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel – HRC60[◎] / Stainless Steel[◎] / Cast Iron[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Cast Iron[◎] | - | - | - | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | Aluminum[◎] | - | - | General Steel[○/◎] / Heat-Treated Steel[○] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○/◎] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] | - | - |
| Flute Length (ℓ)(mm) | 10 ～ 38 | 16 ～ 38 | 15 ～ 45 | 15 ～ 60 | 15 ～ 45 | 25 ～ 65 | 15 ～ 45 | 10 ～ 38 | 15 ～ 45 | 25 ～ 65 | 15 ～ 45 | 15 ～ 45 | 8 ～ 25 | 13 ～ 38 | 13 ～ 38 | 10 ～ 50 | 12 ～ 36 | 15 ～ 25 | 26 ～ 45 | 10 ～ 62 | 13 ～ 38 | 40 ～ 80 | 60 ～ 120 | 3 ～ 80 | 12 ～ 45 | 15 ～ 45 | 15 ～ 45 | 26 ～ 82 | 9 ～ 46 | 9 ～ 30 | 6 ～ 51 | 8 ～ 50 | - | - | - | 13 ～ 16 | 7 ～ 38 | 13 ～ 51 | 10 ～ 45 | 10 ～ 45 | 13 ～ 26 | 12 ～ 40 | 13 ～ 45 | 19 ～ 32 | 19 ～ 32 |
| Number of Flutes(sheet) | 4 | 3 ～ 4 | 3 | 4 | 3 ～ 4 | 4 | 3 ～ 4 | 3 ～ 4 | 3 ～ 4 | 3 ～ 4 | 3 ～ 4 | 3 | 3 ～ 4 | 4 | 4 | 4 | 6 ～ 14 | 4 | 4 ～ 6 | 3 ～ 4 | 4 | 4 | 4 | 4 ～ 8 | 4 | 3 | 3 | 3 | 3 | 3 | 3 | 3 ～ 4 | 3 | 4 | 4 | 3 | 3 ～ 4 | 3 | 6 ～ 16 | Outer Diameter 6/Bottom Blade 3 ～ Outer Diameter 16/Bottom Blade 8 | 4 | 3 | 3 ～ 4 | Bur End | Bur End |
| Model | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Square | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Square | Square |
| Coating | For High Hardness (Silicone-Based) | TiAlN | DLC | TiAlN | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated | - | TiAlN | TiAlN | For General Steel (AlCrN etc.) | Diamond Coat | Diamond Coat | TiAlN | TiAlN | TiAlN | Non-Coated | Non-Coated | TiN | TiAlN | Non-Coated | DLC | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN | - | - | - | TiAlN | TiCN | Non-Coated | Non-Coated | Non-Coated | - | TiAlN | - | Diamond Coat | Non-Coated |
| Link Diameter (d)(mm) | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 25 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 4 ～ 12 | 6 ～ 10 | 12 ～ 25 | 3 ～ 25 | 6 ～ 20 | 20 ～ 42 | 20 ～ 42 | 6 ～ 20 | 4 ～ 25 | 6 ～ 20 | 6 ～ 20 | 6 ～ 25 | 5 ～ 25 | 5 ～ 18 | 4 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 20 | 6 ～ 8 | 6 ～ 20 | 6 ～ 25 | 4 ～ 20 | 4 ～ 20 | 6 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 10 | 6 ～ 10 |
| Overall Length (L)(mm) | 57 ～ 104 | 57 ～ 104 | 57 ～ 100 | 60 ～ 140 | 60 ～ 130 | 100 ～ 150 | 100 ～ 150 | 60 ～ 110 | 60 ～ 130 | 100 ～ 150 | 100 ～ 150 | 57 ～ 100 | 50 ～ 75 | 50 ～ 100 | 50 ～ 100 | 45 ～ 100 | 62 ～ 94 | 65 ～ 75 | 85 ～ 120 | 50 ～ 140 | 50 ～ 110 | 130 ～ 180 | 150 ～ 220 | 45 ～ 140 | 50 ～ 120 | 50 ～ 105 | 50 ～ 105 | 75 ～ 180 | 75 ～ 180 | 100 ～ 250 | 50 ～ 140 | 55 ～ 130 | 57 ～ 121 | 57 ～ 121 | 57 ～ 104 | 57 ～ 63 | 54 ～ 104 | 55 ～ 130 | 50 ～ 110 | 50 ～ 110 | 60 ～ 80 | 50 ～ 105 | 50 ～ 100 | 60 ～ 80 | 60 ～ 80 |
| Length Under Neck (ℓ1)(mm) | 17 ～ 66 | - | 20 ～ 70 | 22 ～ 55 | 20 ～ 92 | 30 ～ 112 | 20 ～ 95 | 17 ～ 72 | 20 ～ 92 | 30 ～ 112 | 20 ～ 95 | 20 ～ 70 | - | - | - | - | - | - | - | 22 ～ 57 | 18 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 15 ～ 36 | - | - | - |
| Processing Applications | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Side Surface / Groove | Side Surface / Groove | Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Side Surface | Side Surface | Side Surface | Side Surface / Groove | Side Surface / Groove | - | - | - | Flat Surface / Side Surface / Groove | Groove | Side Surface / Groove | Flat Surface / Side Surface / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Inclined Cutting | Side Surface / Groove | Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | - | - |
| Flute Shape | Ultra-Small R | C Surface | Ultra-Small R | C Surface | Ultra-Small R | Ultra-Small R | Ultra-Small R | C Surface | C Surface | C Surface | C Surface | Ultra-Small R | - | With Lead | With Lead | With Lead | With Lead | With Lead | C Surface | C Surface | C Surface | C Surface | C Surface | With Lead | C Surface | C Surface | C Surface | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | - | - | - | - | - | - | Sharp Corner | - | Sharp Corner | C Surface | - | - | - | - |
| Helix Angle (θ) | Weak Helix (15 to 25°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Weak Helix (15 to 25°) | Weak Helix (15 to 25°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | - | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Without Torsion | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) / Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Weak Helix (15 to 25°) | Uneven Lead | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | - | - |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Metric / Inch
-
Flute Diameter (D)(φ)
-
Work Material
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Model
-
Coating
-
Link Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
-
Flute Shape
-
Helix Angle (θ)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy