(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Indexing Plungers - Knob type, selectable tip, metric fine thread.
MISUMI
Alteration of tip shapes makes it possible to use the product separately depending on the current application demand.
Days to Ship: | Same day or more |
---|
Show Stock Products
Indexing Plungers - Knob type, metric fine or coarse thread.
MISUMI
•Type: Standard Knob
•Overall Length: Standard
•Mounting Method: Screw-In
•Locking Mechanism: Without Locking Nose
•Operation Knob: Provided
Days to Ship: | Same day or more |
---|
Show Stock Products
Indexing Plungers - With selectable stroke, PLX series.
NBK
Two types of standardized stroke for each pin diameter. For indexing or positioning.
[Features]
- Two types of standardized stroke for each pin diameter (except for φ10 and φ12).
- For indexing or positioning.
- Pin is hardened (steel) or nickel-plated (stainless steel). Excellent abrasion resistance.
- If the threaded part is too long for the mounting surface, use the PXC indexing plunger collar instead.
Days to Ship: | 8 Days or more |
---|
Indexing Plungers - Knob type with precision pilot pin.
MISUMI
•Type: Standard Knob
•Overall Length: Standard
•Mounting Method: Screw-In
•Locking Mechanism: Without Locking Nose
•Operation Knob: Provided
Days to Ship: | Same day or more |
---|
Show Stock Products
Indexing Plungers - With selectable stroke, retracted position, PLY series.
NBK
Two types of standardized stroke for each pin diameter. Pull the knob and rotate 90° to lock with the pin retracted. To unlock, pull the knob slightly and rotate 90°. Returns to its original position via internal spring action.
Days to Ship: | Same day or more |
---|
Show Stock Products
Indexing Plungers - Lever Type, Fine Thread, PXV Series.
NBK
Turn the lever to control pin insertion on the indexing plunger.
[Features]
- Pin retracts into the body with a 180° turn of the lever.
- Lever can be locked with a notch machined in the main body.
- Ergonomic lever cap attached to the PXV-B/BK.
- Hardened pin for good abrasion resistance.
- PXV-A and PXV-B have no lock nut.
- PXV-AK and PXV-BK have a lock nut for fixing.
Days to Ship: | 8 Days or more |
---|
Indexing Plungers - Lever type, fine thread, retracted position, PXVS series.
NBK
[Features]
- Stainless steel.
- Superior corrosion resistance.
- Turn the lever to control the pin insertion.
- Retractable into the body with a 180° turn of the lever.
- Lever can be locked with a notch machined in the main body.
- Ergonomic lever cap attached to the PXVS-B/BK.
- Nickel plating for good abrasion resistance.
Days to Ship: | 8 Days or more |
---|
Indexing Plungers - Knob type, long, metric fine thread.
MISUMI
•Type: Standard Knob
•Overall Length: Standard
•Mounting Method: Screw-In
•Locking Mechanism: Without Locking Nose
•Operation Knob: Provided
Days to Ship: | 8 Days or more |
---|
Indexing Plungers - Lever type, metric coarse thread.
MISUMI
•Type: Lever Type
•Overall Length: Standard
•Mounting Method: Screw-In
•Locking Mechanism: Lever Type
•Operation Knob: Provided
Days to Ship: | Same day |
---|
Show Stock Products
Indexing Plungers - Without knob, for heavy load.
MISUMI
The most suitable knob for each purpose can be mounted.
Days to Ship: | Same day or more |
---|
Show Stock Products
Indexing Plungers - With/without knob, fine thread, PXZ series.
NBK
[Features]
- The screw itself can be screwed entirely into devices, with only the knob remaining visible.
- Attractive design.
- The locking pin is available in hardened (steel) or nickel-plated (stainless steel) versions.
- Highly resistant to wear and tear.
- The knob used is the newly standardized stainless steel knob used in FXZS-Z and PXZS-SK.
- Use to prevent loosening of index plungers.
Days to Ship: | 8 Days or more |
---|
Indexing Plungers - Rounded knob type.
HALDER
[Features]
· For index holes.
· Pull the knob and rotate 90 degrees to fix the pin in place in a withdrawn state using the notch.
· External dimensions are the same regardless of whether or not holding mechanisms are present.
· The roots of screw parts are loosened, so they can be screwed in fully.
· Operating temperature range is from -30 to +80°C.
· Use the distance collar (EH22120) to adjust the depth of the screw-in.
Days to Ship: | 10 Days |
---|
Indexing Plungers - Push type.
MISUMI
•Type: Special Knob
•Overall Length: Standard
•Mounting Method: Screw-In
•Operation Knob: Provided
•Body Material: 1045 Carbon Steel
Days to Ship: | 8 Days or more |
---|
Indexing Plungers - With mounting plate, selectable handle, PBX series.
NBK
Indexing plungers integrated with a mounting flange. Suitable for mounting to panel surfaces on equipment/devices, etc.
Days to Ship: | 8 Days or more |
---|
Indexing Plungers - Knob Type, PDX series.
NBK
[Features]
· A new type of indexing plunger.
· Features a lock mechanism.
· The PDX-A/AK, with knob, have been standardized.
· For the PDX-A/AK, pin insertion is controlled via the knob.
· Turning the knob 90° clockwise after pulling it out allows the guide pin to fit into the slot, locking the unit with the pin retracted.
· To unlock, pull the knob out slightly and rotate it 90° counterclockwise.
· Returns to its original position via the action of the integrated spring.
Days to Ship: | 10 Days or more |
---|
Indexing Plungers - With mounting plate, selectable actuator.
HALDER
[Features]
· Use washers (For example, ISO7092) for mounting.
· On types with locks, rotate the knob 90 degrees to stop the notch moving.
On types with holding mechanisms, pull the knob and rotate it approximately 70 degrees to keep the pin in its withdrawn state.
· Operating temperature range: -30 to +80°C.
· Up to 100°C on types with rings.
Days to Ship: | 10 Days or more |
---|
Indexing Plungers - Flat Knob Type.
HALDER
[Features]
· For index holes.
· Pull the knob and rotate 90 degrees to fix the pin in place in a withdrawn state using the notch.
· Operating temperature range is from -30 to +80°C.
· Use the distance collar (EH22120) to adjust the depth of the screw-in.
Days to Ship: | 10 Days |
---|
Indexing Plungers - Lever type with status display.
MISUMI
The ON/OFF state can be visually recognized by the indication on the lever.
Days to Ship: | 14 Days or more |
---|
Indexing Plungers - Knob type, compact, metric coarse thread.
MISUMI
As Compact As Possible. 2/3 of Conventional Products.
Days to Ship: | Same day |
---|
Show Stock Products
Indexing Plungers - Aluminum knob type, short thread and metric fine thread.
MISUMI
•Type: Standard Knob
•Overall Length: Short
•Mounting Method: Screw-In
•Operation Knob: Provided
•Body Surface Treatment: Black Oxide
Days to Ship: | Same day or more |
---|
Show Stock Products
Indexing Plungers - With mounting plate, PBY series.
NBK
[Features]
· An indexing plunger with an integrated mounting flange.
· Suitable for mounting equipment and devices on walls etc.
·Pull out the knob and rotate 90° to lock with the pin in a retracted state.
·To unlock, pull the knob out slightly and rotate it 90°.
· Returns to its original position via the action of the integrated spring.
· For mounting, please use commercially available hex socket bolts, etc.
· Using slotted holes allows you to adjust the position after mounting.
Days to Ship: | Same day or more |
---|
Show Stock Products
Indexing Plungers - Knob type, flanged, PFX series.
NBK
[Features]
· A flanged type indexing plunger that is mounted using countersunk bolts and rivets etc.
· The long pin type PFX-H-A (long pin type) is ideal for mounting thick panels and frames etc.
· The pin has undergone hardening and offers excellent abrasion resistance.
Days to Ship: | 8 Days or more |
---|
Indexing Plungers - With/without knob, hex collar.
HALDER
[Features]
· For index holes.
· Use the distance collar (EH22120) to adjust the depth of the screw-in.
Days to Ship: | 10 Days or more |
---|
Indexing Plungers - Lever Type.
HALDER
[Features]
· For index holes.
· If the lever is rotated 180 degrees the pin retracts. The knob section can be used to maintain this state.
· The operating temperature range of the plastic cap is from -30 to +80°C.
Days to Ship: | 10 Days |
---|
Indexing Plungers - With mounting plate.
MISUMI
•Type: Standard Knob
•Body O.D./Thread Dimension M (mm): 6
•Nose O.D. d Dimension (Ø): 6
•Length L (mm): 48
•Stroke Dimension S (mm): 6
Days to Ship: | 10 Days or more |
---|
Indexing Plungers - No knob, light load.
MISUMI
•Type: No Knob
•Overall Length: Standard
•Mounting Method: Screw-In
•Locking Mechanism: Without Locking Nose
•Body Material: 12L13 Carbon Steel
Days to Ship: | Same day or more |
---|
Show Stock Products
Indexing Plungers - Knob type with threaded tip, metric fine thread.
MISUMI
The attachment can be mounted on the tip.
Days to Ship: | 10 Days or more |
---|
Indexing Plungers - Compact, fine thread, PHY series.
NBK
Compact indexing plunger.
[Features]
- A compact indexing plunger.
- Pull the knob and rotate 30° to lock with the pin retracted.
- To unlock, pull the knob slightly and rotate 30°.
- Returns to its original position via internal spring action.
- Lock mechanism built into the knob.
- Overall length is the same as a PHX without a lock mechanism.
- Pin is nickel-plated for good abrasion resistance.
Days to Ship: | 8 Days or more |
---|
Indexing Plungers - Knob type, fine thread, PCX series.
NBK
[Features]
- A new type of indexing plunger.
- Pin usually retracted in the main unit.
- With lock mechanism.
- The knob-type PCX-A/AK and the key-type PCX-B/BK are standardized.
Days to Ship: | 10 Days or more |
---|
Indexing Plungers - Flanged knob type, retracted position, PFY series.
NBK
[Features]
· A flanged type indexing plunger that is mounted using countersunk bolts and rivets etc.
· The long pin type PFY-H-A is ideal for mounting thick panels and frames etc.
· Pull out the knob and rotate 90° to lock with the pin in a retracted state. · To unlock, pull the knob out slightly and rotate it 90°. · Returns to its original position via the action of the integrated spring.
· The lock mechanism is integrated into the knob. Therefore, the overall length is the same as that of the PFX, which does not have a lock mechanism.
· The pin has undergone hardening and offers excellent abrasion resistance.
Days to Ship: | Same day or more |
---|
Show Stock Products
Indexing Plungers - Knob type, fine/coarse thread, PMX series.
NBK
Simple structure index plunger.
[Features]
· Superior cost performance.
· For all pin diameters, coarse thread and fine thread are standardized.
· Can select main body material quality and whether or not to include a lock nut using the product code.
[Applications]
· For positioning workpieces.
· For attaching and detaching workpieces.
Days to Ship: | Same day or more |
---|
Show Stock Products
Indexing Plungers - Knob type, compact, for mounting on thin plates.
HALDER
[Features]
· Index bolt for through holes in thin sheets.
· A fixing sleeve can be used to mount sheets 1 to 5 mm thick
· For types with locks, pulling the knob and rotating it 90 degrees locks the mechanism with the notch.
· For this element, depending on the thickness of the opposing part, the pin may not fit fully into the notch, even if the knob is pulled all the way out.
· Operating temperature range: from -30 to +80°C.
Days to Ship: | 10 Days |
---|
Indexing Plungers - Flanged knob type, compact.
HALDER
[Features]
· For index holes.
· This index bolt is characterized by its small size, and is suitable for fixing this parts in place.
· On models with hold mechanisms, pull the knob and rotate 90 degrees to fix the pin in place in a withdrawn state using the notch.
· Operating temperature range is from -30 to +80°C.
Days to Ship: | 10 Days |
---|
Indexing Plungers - Precision with tapered stem.
HALDER
[Features]
· This precision index bolt can be used in combination with bushings for speedy positioning and fixing in place.
· Both parts are accurately finished, ensuring high repetition accuracy.
· For specifications with hold mechanisms, pull the knob and rotate it 90 degrees.
Days to Ship: | 10 Days |
---|
Indexing Plungers - Lever type, metric fine thread.
MISUMI
•Type: Lever Type
•Overall Length: Standard
•Mounting Method: Screw-In
•Locking Mechanism: Lever Type
•Operation Knob: Provided
Days to Ship: | Same day or more |
---|
Show Stock Products
Indexing Plungers - Knob type, fine thread, stainless steel, NDXN-ASUS series.
Imao
Made entirely of stainless steel, this product is ideal for areas demanding rust-proofing as well as clean environments. Two types of noses are available: hardened and non-hardened.
Days to Ship: | 8 Days or more |
---|
Indexing Plungers - Knob-type, retracted position, PIN series.
Nabeya
Rotating the operation knob 90° enables fixation with the pin retracted.
[Features]
· Pulling and rotating the operation knob 90° enables locking with the pin retracted.
· To unlock, pull the operation knob a little and rotate it by 90°.
· Returns to its original position via internal spring action
Days to Ship: | 9 Days or more |
---|
Indexing Plungers - Knob type, retracted position IPL series.
Konishi
Pull the knob and rotate it 90° to lock the product with the center pin in retracted state. Return the knob to its original position to release the lock; the center pin returns to its original position.
Days to Ship: | Same day or more |
---|
Show Stock Products
Indexing Plungers - With ball shaped knob, IP-5 series.
Konishi
Indexing plungers with a grip ball attached to the knob.
Days to Ship: | 8 Days or more |
---|
Indexing Plungers - Lever Type, Fine Thread, ILP Series.
Konishi
Rotate the lever 180° to retract the center pin and engage the lock. Use to calculate and adjust the position of jigs.
Days to Ship: | 9 Days or more |
---|
Indexing Plungers - Without Knob, with Hex Collar, IP-4 Series.
Konishi
Knobless indexing plungers.
For complete product overview and details on Indexing Plunger IP-4 see the sections below:
Days to Ship: | 10 Days or more |
---|
Indexing Plunger - Knob Type, Flanged, IPFL Series.
Konishi
Pulling the knob and rotating it 90° locks the product with the center pin in a retracted state. Returning the knob to its original position releases the lock and the center pin returns to its original position. Flat head screw fixed type indexing plungers.
Days to Ship: | 10 Days or more |
---|
Indexing Plungers - With/Without Knob, 22120 series.
HALDER
[Features]
· For index holes.
· Operating temperature range is from -30 to +80°C.
· Use the distance collar (EH22120) to adjust the depth of the screw-in.
Days to Ship: | 10 Days |
---|
Indexing Plungers - Mini, Knob Type, Standard.
HALDER
[Features]
· Small index bolts are particularly well suited for mounting to thin objects.
· On items with hold mechanisms, pull out the knob and rotate it 30° to hold.
· Operating temperature range: -30 to 80°C.
· Mounting method: screw in the screw area on the main body, then lift up the knob and use the hexagonal section to tighten it.
· Increased screw size.
Days to Ship: | 10 Days |
---|
Indexing Plungers - With T-handle, return position.
HALDER
[Features]
· For index holes.
· Dimensions do not change, regardless of whether or not locking mechanisms are present.
· Screw parts are designed to have clearance at the root, so even the hexagonal section can be tightened properly.
· Operating temperature range: -30 to +80°C.
· Use the distance collar (EH22120) to adjust the depth of the screw-in.
Days to Ship: | 10 Days |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Type |
Locking Mechanism |
Mounting Method |
Overall Length |
Body Material |
All Stainless |
Nose Material |
Body O.D./Thread M(mm) |
Stroke S(mm) |
Nose Surface Treatment |
Nose Heat Treatment |
Nose O.D. d(Ø) |
Length L(mm) |
Brand | MISUMI | MISUMI | NBK | MISUMI | NBK | NBK | NBK | MISUMI | MISUMI | MISUMI | NBK | HALDER | MISUMI | NBK | NBK | HALDER | HALDER | MISUMI | MISUMI | MISUMI | NBK | NBK | HALDER | HALDER | MISUMI | MISUMI | MISUMI | NBK | NBK | NBK | NBK | HALDER | HALDER | HALDER | MISUMI | Imao | Nabeya | Konishi | Konishi | Konishi | Konishi | Konishi | HALDER | HALDER | HALDER |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Indexing Plungers - Knob type, selectable tip, metric fine thread. | Indexing Plungers - Knob type, metric fine or coarse thread. | Indexing Plungers - With selectable stroke, retracted position, PLY series. | Indexing Plungers - Lever type, fine thread, retracted position, PXVS series. | Indexing Plungers - With/without knob, fine thread, PXZ series. | Indexing Plungers - With mounting plate, selectable handle, PBX series. | Indexing Plungers - With mounting plate, selectable actuator. | Indexing Plungers - Knob type, compact, metric coarse thread. | Indexing Plungers - Aluminum knob type, short thread and metric fine thread. | Indexing Plungers - Knob type with threaded tip, metric fine thread. | Indexing Plungers - Flanged knob type, retracted position, PFY series. | Indexing Plungers - Knob type, fine/coarse thread, PMX series. | Indexing Plungers - Knob type, compact, for mounting on thin plates. | Indexing Plungers - Knob type, fine thread, stainless steel, NDXN-ASUS series. | Indexing Plungers - Knob-type, retracted position, PIN series. | Indexing Plungers - Knob type, retracted position IPL series. | Indexing Plungers - Without Knob, with Hex Collar, IP-4 Series. | ||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Days to Ship |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more |
Same day
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 10 Days | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days | 14 Days or more |
Same day
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 10 Days or more | 10 Days | 10 Days or more |
Same day or more
Show Stock Products | 10 Days or more | 8 Days or more | 10 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 10 Days | 10 Days | 10 Days |
Same day or more
Show Stock Products | 8 Days or more | 9 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 9 Days or more | 10 Days or more | 10 Days or more | 10 Days | 10 Days | 10 Days |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||
Type | Standard Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob | Lever Type | Lever Type | Standard Knob | Lever Type | No Knob | Standard Knob / No Knob | Standard Knob | Special Knob | Standard Knob | Standard Knob / Special Knob | Standard Knob / With Ring | Standard Knob | Lever Type | Standard Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob / No Knob | Special Knob | Standard Knob | No Knob | Standard Knob | Standard Knob | Standard Knob / Special Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob | Special Knob | Lever Type | Standard Knob | Standard Knob | Standard Knob | Special Knob | Lever Type | No Knob | Standard Knob | Standard Knob / No Knob | Standard Knob | Special Knob |
Locking Mechanism | Without Locking Nose | Without Locking Nose | None | Without Locking Nose | With Locking Nose | With Locking Nose | With Locking Nose | Without Locking Nose | With Locking Nose | Without Locking Nose | None | - | - | None | With Locking Nose | With Locking Nose / Without Locking Nose | - | With Locking Nose | Without Locking Nose | With Locking Nose / Without Locking Nose | With Locking Nose | None | - | - | - | Without Locking Nose | Without Locking Nose | With Locking Nose | With Locking Nose | With Locking Nose | None | - | - | - | With Locking Nose | None | With Locking Nose | With Locking Nose | None | With Locking Nose | None | With Locking Nose | - | - | - |
Mounting Method | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Flange | Screw-In | Others | Screw-In | Screw-In | Screw-In | Screw-In | Flange | Flange | Screw-In | Screw-In | Flange | Screw-In | Screw-In | Screw-In | Screw-In | Flange | Screw-In | Screw-In / Others | Flange | Others | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Flange | Screw-In | Screw-In | Screw-In |
Overall Length | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | Standard | Standard / Short | Standard | Standard | - | Standard | Short | Short | Short | Short | - | - | Short | Standard | Standard | Short | Standard | Short | Standard | - | - | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Short | - | Standard | - |
Body Material | Steel | Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel | Stainless Steel | Steel | Steel | Steel | Steel / Stainless Steel | - | Steel | Zinc Die Cast | Steel | Zinc Die Cast | - | Steel | Steel | Steel | Zinc Die Cast | Zinc Die Cast | - | - | Steel | Steel | Steel | Steel | Steel | Zinc Die Cast | Steel / Stainless Steel | - | - | - | Steel | Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel | Zinc Die Cast | - | - | - |
All Stainless | - | - | Not Compliant | - | Not Compliant | Not Compliant | Applicable / Not Compliant | - | - | - | Applicable / Not Compliant | - | - | Not Compliant | Not Compliant | - | - | - | - | - | Not Compliant | Not Compliant | - | - | - | - | - | Not Compliant | Not Compliant | Not Compliant | Not Compliant | - | - | - | - | Applicable | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | - | - | - |
Nose Material | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel | Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | - | Steel | Stainless Steel | Steel | Stainless Steel | - | Steel | Stainless Steel | Steel | Stainless Steel | Steel | - | - | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel | Steel | Stainless Steel | - | - | - | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel | Steel | Steel | Steel | - | - | - |
Body O.D./Thread M(mm) | 5 ~ 16 | 6 ~ 16 | 8 ~ 20 | 10 ~ 20 | 8 ~ 20 | 12 ~ 20 | 12 ~ 20 | 8 ~ 16 | 10 ~ 12 | 8 ~ 16 | 10 ~ 20 | - | 10 ~ 16 | 6 ~ 12 | 12 ~ 16 | - | - | 12 ~ 20 | 8 ~ 10 | 12 ~ 16 | 6 ~ 12 | 10 ~ 12 | - | - | 6 | 10 ~ 16 | 10 ~ 16 | 8 ~ 10 | 12 ~ 16 | 10 ~ 12 | 6 ~ 12 | - | - | - | 16 ~ 20 | 8 ~ 20 | 10 ~ 16 | 6 ~ 12 | 10 ~ 20 | 16 ~ 20 | 10 ~ 16 | 10 ~ 12 | - | - | - |
Stroke S(mm) | 4 ~ 12 | 4 ~ 8 | 4 ~ 15 | 5 ~ 10 | 4 ~ 15 | 8 ~ 12 | 8 ~ 12 | 4 ~ 12 | 5 ~ 6 | 4 ~ 12 | 5 ~ 10 | - | 5 ~ 8 | 4 ~ 8 | 8 ~ 10 | - | - | 6 ~ 10 | 5 ~ 6 | 6 ~ 7 | 4 ~ 8 | 6 ~ 8 | - | - | 6 | 5 ~ 8 | 5 ~ 12 | 5 ~ 7 | 8 ~ 10 | 6 ~ 8 | 4 ~ 8 | - | - | - | 10 ~ 12 | 4 ~ 10 | 5 ~ 8 | 4 ~ 8 | 5 ~ 10 | 10 ~ 12 | 5 ~ 8 | 6 ~ 18 | - | - | - |
Nose Surface Treatment | None / Black Oxide | None / Black Oxide / Nickel Plating | None / Nickel Plating | Black Oxide | None / Nickel Plating | None | Nickel Plating | None / Black Oxide | Black Oxide / Electroless Nickel | None / Black Oxide | None / Nickel Plating | - | Black Oxide / Electroless Nickel | None | None | - | - | Black Oxide | None | Black Oxide | None | None | - | - | Black Oxide | Black Oxide / Nickel Plating | None / Black Oxide | Trivalent Chromate | None | None | None | - | - | - | Black Oxide / Nickel Plating | None | Black Oxide / Electroless Nickel | None | None | Black Oxide | None | None | - | - | - |
Nose Heat Treatment | Hardened | None / Hardened | None / Hardened | Hardened | None / Hardened | Hardened | None | Hardened | Hardened | Hardened | None / Hardened | - | Hardened | None | Hardened | - | - | Hardened | None | Carburized | None | Hardened | - | - | Hardened | None / Hardened | Hardened | None | Hardened | Hardened | None | - | - | - | None / Hardened | Hardened | None / Carburized | None | None | None | None | None | - | - | - |
Nose O.D. d(Ø) | 2 ~ 8 | 4 ~ 8 | 4 ~ 12 | 5 ~ 10 | 4 ~ 12 | 5 ~ 12 | 5 ~ 12 | 4 ~ 8 | 5 ~ 6 | 4 ~ 8 | 5 ~ 10 | 4 ~ 12 | 5 ~ 8 | 4 ~ 8 | 6 ~ 8 | 4 ~ 8 | 5 ~ 10 | 6 ~ 10 | 5 ~ 6 | 6 ~ 8 | 4 ~ 8 | 6 ~ 8 | 4 ~ 12 | 4 ~ 12 | 6 | 5 ~ 8 | 5 ~ 8 | 4 ~ 7 | 6 ~ 8 | 6 ~ 8 | 4 ~ 8 | 6 ~ 8 | 6 ~ 8 | 7.1 ~ 25 | 6 ~ 12 | 4 ~ 10 | 5 ~ 8 | 4 ~ 8 | 5 ~ 10 | 6 ~ 12 | 5 ~ 8 | 6 ~ 8 | 5 ~ 10 | 4 ~ 10 | 6 ~ 12 |
Length L(mm) | 35 ~ 80.5 | 30.5 ~ 75.5 | 32 ~ 82 | 38 ~ 70 | 39 ~ 82 | 47 ~ 71 | 47 ~ 71 | 46 ~ 85 | 34 ~ 39 | 30 ~ 54 | 33 ~ 80 | - | 47.5 ~ 68 | 30.5 ~ 71 | 51 ~ 62 | - | - | 74 ~ 123 | 25 ~ 31 | 48 ~ 56 | 33 ~ 63.5 | 37 ~ 54 | - | - | 48 | 33 ~ 54 | 45 ~ 80.5 | 26.5 ~ 34 | 43 ~ 64.5 | 37 ~ 54 | 30.5 ~ 71 | - | - | - | 47 ~ 59 | 43 ~ 83 | 49 ~ 73 | 33 ~ 63.5 | 46 ~ 84 | 56 ~ 69 | 33 ~ 54 | 37 ~ 54 | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy