(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
MISUMI Locating Pins（Page3）
Basic Shape
-
Small Head Locating Pins - Plastic, round head and selectable tip, straight shank with metal center.
MISUMI
Locating pins with �4 or less pin diameter. Selectable from 4 different tip shapes.
- METRIC
- inCAD Components
Days to Ship: 10 Days or more -
Straight Locating Pins - Plastic, tapered tip with screw mounting hole, standard grade.
MISUMI
Plastic Locating Pins which prevent workpiece damages.
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Small Head Locating Pins - Polyacetal, round head and selectable tip, internally threaded shank.
MISUMI
Plastic Locating Pins which prevent workpiece damages.
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 8 Days or more -
Large Head Locating Pins - Triangular or round head, tapered tip and straight shank.
MISUMI
•Shape: Large Head
•Head Dia. Tolerance: 0/-0.01
•Shank Dia. Tolerance: m6
•Head Tip Shape: Tapered
•Shank Style: Straight (Press-fit)- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Large Head Locating Pins - Triangular or round head, tapered tip and externally threaded shank.
MISUMI
•Shape: Large Head
•Head Dia. Tolerance: 0/-0.01
•Shank Dia. Tolerance: g6
•Head Tip Shape: Tapered
•Shank Style: Threaded- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Locating Pins with Shoulder - Round head, tapered tip, straight shank.
MISUMI
Locating pin with a long conical part. The workpiece can be received by the collet and the base will not be damaged. Options available in tool steel or stainless steel, additionally hardened heat treatment and/or hard chrome surface treatment can be configured. Clamping is by means of press fit.
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Shoulder Locating Pins - Round head, tapered tip, internally threaded shank.
MISUMI
Locating pin with a long conical part. The workpiece can be received by the collet and the base will not be damaged. Options available in tool steel or stainless steel, additionally hardened heat treatment and/or hard chrome surface treatment can be configured. Clamping is by means of the internal thread. Internal thread can be selected in sizes from M3 to M5.
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Shoulder Locating Pins - Round head, tapered tip, externally threaded shank.
MISUMI
Locating pin with a long conical part. The workpiece can be received by the collet and the base will not be damaged. Options available in tool steel or stainless steel, additionally hardened heat treatment and/or hard chrome surface treatment can be configured. Clamping is by means of press fit. External thread can be selected in sizes from M3 to M10.
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
Small Head Locating Pins with Shoulder - Round head, selectable tip, straight shank.
MISUMI
Locating pins with �4 or less pin diameter. Head prevents pin from sliding out. Selectable from 3 different tip shapes.
[FY22 new product]
・Added material "Equivalent to W1-9 Tool Steel" as a standard option- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
MISUMI
It is possible to configure the tip with a hex key entry hole or to configure the tip to have a hole drilled through it. The P, L and B values are configurable, while the external thread M is selectable. With g6 fit, material alloy steel SCM415.
- METRIC
Days to Ship: 10 Days or more -
Large Head Locating Pins - Round head, spherical tip, externally threaded shank.
MISUMI
•Shape: Large Head
•Head Dia. Tolerance: 0/-0.01
•Shank Dia. Tolerance: g6
•Head Shape: Round
•Head Tip Shape: Spherical- METRIC
Days to Ship: 10 Days or more -
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P, L and B dimensions are configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P, L and B dimensions are configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
Large Head Locating Pins in Inches - Round head, flat tip, straight shank.
MISUMI
The dimensions of this model are in inches. The head is round. P dimension is selectable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- Volume Discount
- INCH
Days to Ship: 25 Days or more -
Small Head Locating Pins in Inches - Round or diamond head, tapered tip, straight shank.
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is selectable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- Volume Discount
- INCH
Days to Ship: 25 Days or more -
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P, L and B dimensions are configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
Inch Small Head Locating Pins - Round or diamond head, tapered tip, internally threaded shank.
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P, L and B dimensions are configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P, L and B dimensions are configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
Small Head Locating Pins in Inches - Round or diamond head, ball point, straight shank.
MISUMI
The dimensions of this model are in inches. The head can be selected from round or diamond. P dimension is configurable, from 0.0935 to 0.5 in 0.0005 increments. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P, L and B dimensions are configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
Inch Shoulder Locating Pins - Round or diamond head, tapered tip, straight shank.
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is selectable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- Volume Discount
- INCH
Days to Ship: 25 Days or more -
Inch Shoulder Locating Pins - Round or diamond head, straight shank, configurable P dimension.
MISUMI
The dimensions of this model are in inches. The head can be selected from round or diamond. The P dimension is configurable with values from 0.0935 to 0.5155. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
Inch Shoulder Locating Pins - Round or diamond head, straight shank, configurable P/L/B dimensions.
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P, L and B dimensions are configurable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
Inch Shoulder Locating Pins - Round or diamond head, tapered tip, internally threaded shank.
MISUMI
The dimensions of this model are in inches. The head can be selected between round or diamond. P dimension is selectable. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- Volume Discount
- INCH
Days to Ship: 25 Days or more -
MISUMI
The dimensions of this model are in inches. The head can be selected from round or diamond. The P dimension is configurable with values from 0.125 to 0.5155. Options available in A2 tool steel or stainless steel, can be selected with or without hardness.
- INCH
Days to Ship: 8 Days or more -
MISUMI
Internally threaded bolts, available with round and diamond head, with configurable diameters and lengths. Options available in tool steel or stainless steel, additionally a hardened heat treatment can be configured.
- INCH
Days to Ship: 8 Days or more -
Large Head Locating Pins in Inches - Tapered and vented tip, externally threaded shank.
MISUMI
It has a groove along the pin, which is used to eliminate the vacuum when removing the pin. External threading configurable in sizes from #5-40 to 1/4-20. Options available in bearing steel or stainless steel. Selectable L dimension.
- Volume Discount
- INCH
Days to Ship: 16 Days or more -
Straight Locating Pins in Inches - Tapered and vented tip, internally threaded shank.
MISUMI
It has a groove along the pin, which is used to eliminate the vacuum when removing the pin. Has configurable internal threading in sizes from #5-40 to 1/4-20. Options available in bearing steel or stainless steel. Selectable L dimension.
- Volume Discount
- INCH
Days to Ship: 16 Days or more -
Large Head Locating Pins in Inches - Tapered and round tip, straight shank.
MISUMI
Pilot pins are ideal in rotating mechanisms, their adjustment is by pressure. Options available in bearing steel or stainless steel. Dimension L selectable. P dimension configurable in 0.0005 increments.
- INCH
Days to Ship: 8 Days or more -
MISUMI
Pilot pins are ideal in rotating mechanisms, their adjustment is by internal thread. Options available in tool steel or stainless steel, additionally a hardened heat treatment can be configured. Dimension L selectable. P dimension configurable in 0.0005 intervals.
- INCH
Days to Ship: 8 Days or more -
Small Diameter, Small Head Locating Pins - Spherical tip and straight shank.
MISUMI
Designed primarily to work with miniature components. Available with spherical head, configurable diameters and lengths. Options available in spring steel or stainless steel, additionally a hardened heat treatment can be configured. Configurable D/L/P/P/B sizes.
- INCH
Days to Ship: 12 Days or more -
MISUMI
Designed primarily to work with miniature components. Manufactured in resin with stainless steel core. Available with flat head, configurable diameter and length. Body material can be selected between phenolic or polyacetal. Configurable D and L dimensions.
- INCH
Days to Ship: 12 Days or more -
Straight Push Pins in Inches - Ball tip, internally threaded shank.
MISUMI
Manufactured in polyacetal which offers good electrical resistance. Available with spherical head, configurable diameter and length. The L dimension is configurable in 0.001 intervals.
- Lead Time Reduction
- INCH
Days to Ship: 9 Days or more -
Retaining Block Housing Pins - Flat tip, internally threaded shank.
MISUMI
Available with flat head, internal threading, h7 tolerances and configurable length. The head shape is long. Black oxide surface treatment. It also has hardened heat treatment.
- METRIC
Days to Ship: 15 Days or more -
Retention Block Long Head Locating Pins - Bullet tip and internally threaded shank.
MISUMI
Available with bullet-shaped tip. M8 internal thread. Tolerances h7. Configurable tip diameter and length. Constructed from SCM415 steel. Also features hardened heat treatment. Outer shank diameter of 16mm.
- METRIC
Days to Ship: 15 Days or more -
Large Head Cylindrical Pins - Bullet point and straight shank.
MISUMI
Available with bullet-shaped tip and straight shank, h7 and F7 tolerances, configurable tip diameter and length. It has an 8mm diameter hole.
- METRIC
Days to Ship: 15 Days or more -
Large Head Locating Pins - With round head, flat tip with hex key entry, externally threaded shank.
MISUMI
Hexagon sockets make it capable of being mounted easily by using hexagonal wrench.
- Lead Time Reduction
- METRIC
- inCAD Components
Days to Ship: 9 Days or more -
MISUMI
The externally threaded stem is held by a nut from the opposite side of the locating pin orientation. The pin material is hardened stainless steel (35HRC). P/L/B dimensions are configurable in high precision ranges.
- Spec Change
Days to Ship: 10 Days or more -
MISUMI
The internally threaded stem is held by screws from the opposite side of the locating pin orientation. The pin material is hardened stainless steel (35HRC). P/L/B dimensions are configurable in high precision ranges.
- Spec Change
Days to Ship: 10 Days or more -
MISUMI
The internally threaded stem is held by screws from the opposite side of the locating pin orientation. The head and shank diameter tolerance is selectable from m6, p6, g6, h7 or (0 to -0.01). Pin material is hardened Stainless Steel (35HRC). The P/L/B dimensions are configurable in high precision ranges.
Days to Ship: 10 Days or more -
MISUMI
The internally threaded stem is held by screws from the opposite side of the locating pin orientation. The pin material is hardened stainless steel (35HRC). P/L/B dimensions are configurable in high precision ranges.
- Spec Change
Days to Ship: 10 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Basic Shape |
| Head Shape |
| Head Tip Shape |
| Drive |
| Shank Style |
| Material |
| Heat Treatment |
| Surface Finish |
| Head Diameter(mm) |
| Head Diameter(Inch) |
| Head Dia. Tolerance |
| Shank Diameter(mm) |
| Shank Diameter(Inch) |
| Shank Dia. Tolerance |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Small Head Locating Pins - Plastic, round head and selectable tip, straight shank with metal center. | Straight Locating Pins - Plastic, tapered tip with screw mounting hole, standard grade. | Small Head Locating Pins - Polyacetal, round head and selectable tip, internally threaded shank. | Large Head Locating Pins - Triangular or round head, tapered tip and straight shank. | Large Head Locating Pins - Triangular or round head, tapered tip and externally threaded shank. | Locating Pins with Shoulder - Round head, tapered tip, straight shank. | Shoulder Locating Pins - Round head, tapered tip, internally threaded shank. | Shoulder Locating Pins - Round head, tapered tip, externally threaded shank. | Small Head Locating Pins with Shoulder - Round head, selectable tip, straight shank. | Large Head Locating Pins - Round head, spherical tip, externally threaded shank. | Large Head Locating Pins in Inches - Round head, flat tip, straight shank. | Small Head Locating Pins in Inches - Round or diamond head, tapered tip, straight shank. | Inch Small Head Locating Pins - Round or diamond head, tapered tip, internally threaded shank. | Small Head Locating Pins in Inches - Round or diamond head, ball point, straight shank. | Inch Shoulder Locating Pins - Round or diamond head, tapered tip, straight shank. | Inch Shoulder Locating Pins - Round or diamond head, straight shank, configurable P dimension. | Inch Shoulder Locating Pins - Round or diamond head, straight shank, configurable P/L/B dimensions. | Inch Shoulder Locating Pins - Round or diamond head, tapered tip, internally threaded shank. | Large Head Locating Pins in Inches - Tapered and vented tip, externally threaded shank. | Straight Locating Pins in Inches - Tapered and vented tip, internally threaded shank. | Large Head Locating Pins in Inches - Tapered and round tip, straight shank. | Small Diameter, Small Head Locating Pins - Spherical tip and straight shank. | Straight Push Pins in Inches - Ball tip, internally threaded shank. | Retaining Block Housing Pins - Flat tip, internally threaded shank. | Retention Block Long Head Locating Pins - Bullet tip and internally threaded shank. | Large Head Cylindrical Pins - Bullet point and straight shank. | Large Head Locating Pins - With round head, flat tip with hex key entry, externally threaded shank. | ||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 10 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 25 Days or more | 25 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 25 Days or more | 8 Days or more | 8 Days or more | 25 Days or more | 8 Days or more | 8 Days or more | 16 Days or more | 16 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 12 Days or more | 9 Days or more | 15 Days or more | 15 Days or more | 15 Days or more | 9 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| Basic Shape | Small Head / Straight / With Air Vent | Screw Mount | Small Head | Large Head | Large Head | Shouldered | Shouldered | Shouldered | Small Head / Shouldered | Large Head | Large Head | Large Head | Large Head | Large Head | Large Head | Large Head | Small Head | Small Head | Small Head | Small Head | Small Head | Large Head | Small Head | Small Head | Small Head / Shouldered | Large Head / Small Head / Shouldered | Large Head / Small Head / Shouldered | Small Head / Shouldered | Large Head / Small Head / Shouldered | Large Head / Small Head / Shouldered | Straight / With Air Vent | Straight / With Air Vent | Screw Mount | Screw Mount | Small Head / Straight / With Air Vent | Straight / With Air Vent | Straight / With Air Vent | Large Head | Large Head | Large Head | Large Head | Large Head | Large Head | Large Head | Large Head |
| Head Shape | Round | Round | Round | Round / Triangle | Round / Triangle | Round | Round | Round | Round | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond |
| Head Tip Shape | Spherical / Flat | Tapered | Spherical / Flat | Tapered | Tapered | Tapered | Tapered | Tapered | Tapered / Spherical / Flat | Tapered | Spherical | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Flat | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Spherical | Spherical | Spherical | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Round Tapered | Spherical | Flat | Spherical | Flat | Bullet Nose | Bullet Nose | Flat | Tapered | Tapered | Tapered | Spherical |
| Drive | None | With Screw Mount Hole | None | None | None | None | None | None | None | With Wrench Hole | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | Flathead Slot | None | None | None | None | None | None | With Hex Socket | None | None | None | None |
| Shank Style | Straight (Press-fit) | Straight (Press-fit) | Tapped | Straight (Press-fit) | Threaded | Straight (Press-fit) | Tapped | Threaded | Straight (Press-fit) | Threaded | Threaded | - | - | Tapped | Tapped | - | - | - | - | Tapped | Tapped | - | - | - | - | - | - | Tapped | Tapped | Tapped | - | Tapped | - | Tapped | - | - | Tapped | Tapped | Tapped | - | Threaded | Threaded | Tapped | Tapped | Tapped |
| Material | Resin | Resin | Resin | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Resin | Steel | Steel | Steel | Steel / Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Heat Treatment | Not Hardened | Not Hardened | Not Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened | Hardened | Not Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened | Hardened | Hardened | Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened |
| Surface Finish | None | None | None | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating | None / Hard Chrome Plating | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | Black Oxide | None | None | None / Electroless Nickel | None | None | None | None |
| Head Diameter(mm) | 1 ～ 2.9 | 8 ～ 16 | 3 ～ 25 | 2.5 ～ 13 | 3.5 ～ 13 | 2 ～ 11 | 4 ～ 11 | 2 ～ 11 | 1 ～ 3.5 | 6.5 ～ 30 | 5.5 ～ 8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 19 ～ 32 | 16.1 ～ 32 | 5 ～ 15 | 3.5 ～ 15 | 6.5 ～ 15 | 6.5 ～ 10 | 6.5 ～ 15 |
| Head Diameter(Inch) | - | - | - | - | - | - | - | - | - | - | - | 0.1875 ～ 0.625 | 0.1875 ～ 0.625 | 0.3125 ～ 0.625 | 0.3125 ～ 0.625 | 1/2 ～ 9/16 | 1/4 ～ 5/16 | 0.0935 ～ 0.5 | 0.0935 ～ 0.5 | 0.1875 ～ 0.5 | 0.1875 ～ 0.5 | 0.1875 ～ 0.625 | 0.0935 ～ 0.5 | 0.0935 ～ 0.5 | 1/2 ～ 5/16 | 0.0935 ～ 0.5155 | 0.0935 ～ 0.5155 | 1/2 ～ 5/16 | 0.125 ～ 0.5155 | 0.125 ～ 0.5155 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 0.156 ～ 0.594 | 0.25 ～ 0.594 | 0.036 ～ 0.109 | - | - | - | - | - | - | - | - | - | - |
| Head Dia. Tolerance | 0/-0.01 ～ h7 | 0/-0.2 ～ 0/-0.05 | 0/-0.3 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 ～ 0.005/0 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | h7 | h7 | h7 | g6 | 0/-0.01 | 0/-0.01 | 0/-0.01 ～ h7 | 0/-0.01 |
| Shank Diameter(mm) | - | - | 6 ～ 25 | 2 ～ 10 | 3 ～ 10 | 2 ～ 10 | 6 ～ 10 | 3 ～ 10 | - | 6 ～ 20 | 5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 10 ～ 16 | 16 | 16 | - | 3 ～ 8 | 6 ～ 8 | 6 ～ 8 | 6 ～ 8 |
| Shank Diameter(Inch) | - | - | - | - | - | - | - | - | - | - | - | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | 1/2 ～ 5/16 | - | - | 1/4 ～ 5/16 | 1/4 ～ 5/16 | - | - | 1 ～ 5/8 | - | - | - | - | - | - | - | - |
| Shank Dia. Tolerance | g6 ～ h7 | 0/-0.2 ～ 0/-0.05 | 0/-0.3 | m6 | g6 | m6 | g6 | g6 | - | g6 | g6 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | h7 | h7 | h7 | - | g6 | g6 | g6 ～ h7 | g6 |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Head Shape
-
Head Tip Shape
-
Drive
-
Shank Style
-
Material
-
Heat Treatment
- Not Hardened
- Immersion Quenching
- Hardened
-
Surface Finish
-
Metric / Inch
-
Head Diameter(mm)
-
Head Diameter(Inch)
-
Head Dia. Tolerance
-
Shank Diameter(mm)
-
Shank Diameter(Inch)
-
Shank Dia. Tolerance
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 12 Days or Less
- 15 Days or Less
- 16 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy