Kameda Denki Electrical Enclosure Mounting Brackets

• 

  L type bracket L40 one hole type

  Kameda Denki

  An L-bracket for supporting piping.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  L-Type Bracket , L40 Two-Hole Type

  Kameda Denki

  An L-type bracket with holes on both ends.
  
  [Features]
  · Connecting holes included for all mounting types.
  · Lightweight and easily handled.
  · Pre-manufactured for to reduce costs and delivery times.
  · Made of hygienic, rust-resistant stainless steel.
  · Screw holes included for easy attachment to a wooden base

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Mini Bracket, Auxiliary Bracket【10 Pieces Per Package】

  Kameda Denki

  This auxiliary bracket is convenient for mounting wiring ducts and small components.
  
  [Features]
  · Can be flexibly used for the support of wiring and small components.
  · Grove conformation with series of holes allows for flexible positioning.
  · The product can be further bent for compatibility with hard-to-mount areas.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Mini brackets, mount brackets for terminal blocks S【10-50 Pieces Per Package】

  Kameda Denki

  Auxiliary brackets allow the terminal block to be mounted at an angle.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Triangle Bracket

  Kameda Denki

  This is a triangular bracket for piping support.
  
  [Features]
  · This is a bracket which is used to support wall surface piping.
  · The stay is welded and is sturdier than L type brackets.
  · Both sides are the same length, so it can be used facing either up, down, left or right.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  U Canada【1-20 Pieces Per Package】

  Kameda Denki

  A U-shaped mounting bracket with perforated channels for use in a multitude of indoor and outdoor applications.
  
  [Features]
  ・Iron, stainless steel, and zinc plated iron finishing options.
  ・1800, 2040, 2400mm length variations.

  • Volume Discount

  Days to Ship:	12 Days or more

• 

  Bar Holder BHX

  Kameda Denki

  Inserted into low-pressure bus bars for support.
  
  [Features]
  · Capable of a broad range of copper band support, from 8 mm to 20 mm.
  · The width of the groups between face A and face B differs, so please use the group that matches the plate thickness of the copper band.
  · Insulation bolts are included, so please choose a product number based on the width of the copper band.

  • Volume Discount

  Days to Ship:	13 Days or more

• 

  Pipe Clamp

  Kameda Denki

  Open board frame pipe fitting.
  
  [Features]
  · Made from steel plate, so it is lightweight and unbreakable.
  · Has a chrome plated finish and requires no painting.
  · Comes with a set U bolt for convenience.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Multi-channel, KC Type

  Kameda Denki

  Perforated C type channel with unlimited applications, including electrical work, piping, air-conditioning work, and switchboards.
  
  [Features]
  · Perforated C type channel with unlimited applications, including electrical work, piping, air-conditioning work, and switchboards.

  • Volume Discount

  Days to Ship:	12 Days or more

• 

  Protective cover stay　S19【10 Pieces Per Package】

  Kameda Denki

  A support tool to attach DIN rail relay and other protective terminal covers.
  
  [Features]
  ・Jointly fasten terminal block stopping tools to more easily attach protective covers.
  ・Please use the stopping tool for each terminal block market product.
  ・Two varieties: 20 mm and 35 mm height.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Mini-Clasp, Strut Clasp【20 Pieces Per Package】

  Kameda Denki

  A clasp with adjustable height designed for panel doors and devices.
  
  [Features]
  · Easily adjustable with just a screwdriver.
  · Can be adjusted and fine-tuned after attaching it to a device

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Minikanagu mounting fitting, S【10 Pieces Per Package】

  Kameda Denki

  This product is an auxiliary metal fitting for mounting terminal blocks etc.
  
  [Features]
  ・A mounting hole has now been added, making it easier to use.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Mini-Quick Connector/Mount【50 Pieces Per Package】

  Kameda Denki

  A supporting clasp useful for wiring ducts and small parts.
  
  [Features]
  · Convenient adjustment of height and dimensions.
  · Use push-mount ties with KS-14 for easy wiring

  • Volume Discount

  Days to Ship:	13 Days or more

• 

  Uni-Clasp【1-10 Pieces Per Package】

  Kameda Denki

  Multi-angle U connection clasp.
  
  [Features]
  · Very useful for putting clasps together in various positions. UN-26 coupler series works with the U-1 and U-26; the UN-38 series works with the U-38 and L-40, and the UN-40 series works with the L-40.
  · The UN-26 series includes parts with attractive nickel plating, making them useful support clasps for interior furniture as well

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Collar【50-200 Pieces Per Package】

  Kameda Denki

  An auxiliary collar for tightening U fixtures.
  
  [Features]
  - A high-strength spacer for equipment mounting/installation.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Quick Strut, Hinge Side

  Kameda Denki

  A hinge-side strut for supporting and opening/closing the inside doors of panel boards.
  
  [Features]
  · Both hinge type and fixed type are available.
  ▪ Supports 5 types of distribution boards of varying depths.
  · Lightweight while retaining adequate strength.
  · The center door can be removed by removing the hinge pin

  • Volume Discount

  Days to Ship:	14 Days or more

• 

  Quick Strut, Hinge Receiver Side

  Kameda Denki

  A receiver-side strut for supporting and opening/closing the inside doors of panel boards.
  
  [Features]
  · Both hinge type and fixed type are available.
  ▪ Supports 5 types of distribution boards of varying depths.
  · Lightweight while retaining adequate strength.
  · The center door can be removed by removing the hinge pin

  • Volume Discount

  Days to Ship:	14 Days or more

• 

  Quick Strut, Fixed Type

  Kameda Denki

  A fixed strut strut for supporting the inside doors of panel boards.
  
  [Features]
  · Both hinge type and fixed type are available.
  ▪ Supports 5 types of distribution boards of varying depths.
  · Lightweight while retaining adequate strength.
  · The center door can be removed by removing the hinge pin

  • Volume Discount

  Days to Ship:	14 Days or more

• 

  Bar Holder, BHS

  Kameda Denki

  A holder for screwing in low-voltage bus bars.
  
  [Features]
  · Freely adjustable bus bar interval widths for supporting each bus bar vertically.
  · Stays in place with a single bolt; compatible with a wide range of copper-band dimensions.
  · Made of polypropylene reinforced with glass fiber, providing ample strength

  • Volume Discount

  Days to Ship:	13 Days or more

• 

  Flat bar

  Kameda Denki

  This is a flat bar with holes, with limitless applications in electrical work, piping, air conditioning work, wiring boards, etc.

  • Volume Discount

  Days to Ship:	12 Days or more

• 

  Reinforced Free Rail, Multifunctional-Type

  Kameda Denki

  A reinforced, multifunctional DIN rail with a useful center nut.
  
  [Features]
  · Component can be attached to the rail center by inserting a free nut* on the inside.
  *Use the NS square nut for DA-301 and 302. N2 and N0 types can also be used.
  · Components that are not DIN rail-compatible can be mounted on this rail. .
  · DIN rail type of terminal block and compact terminal block (Higashizawa RT series or Kasuga TR series) can be mounted on the same rail.
  · By using the AC or NF bases, all types of components can be mounted.
  · Strong torsion resistance due to the unique form which does not shake even when used in long lengths.
  · Heavy-duty parts can also be mounted stably.
  · A simple design where the mounting hole pitch of 25 mm fits the duct hole pitch of 50 mm.

  • Volume Discount

  Days to Ship:	16 Days or more

• 

  Free Rail (Long Hole)

  Kameda Denki

  A DIN standard compliant 35mm-width rail. (long hole)
  
  [Features]
  - Made of aluminum for light weight, ease of handling, and a nice finish.
  - Cutting is easy; no need to perform anti-rust treatment on the cut ends.
  - Any part compatible with JIS and DIN-standard rails can be mounted, regardless of manufacturer.
  - Parts and terminal blocks can be freely installed on and removed from any position on the rail, letting it accommodate design changes and added circuits.
  - Even parts which are not DIN rail compatible can be mounted using an attachment bracket such as an NF base

  • Volume Discount

  Days to Ship:	12 Days or more

• 

  Multi-angle Z type

  Kameda Denki

  This is a Z-type angle with limitless applications in electrical work, air conditioning work, wiring boards etc.

  • Volume Discount

  Days to Ship:	12 Days or more

• 

  Quick holder, KH【10 Pieces Per Package】

  Kameda Denki

  A bracket for mounting wiring and other things by gripping it at an angle.
  
  [Features]
  - Bracket is fixed with one screw, minimizing the work required to form holes.
  - With the KH-65 and KH-100, the wiring can be directly fixed in place using a zip tie.
  - Brackets with insulation coating also available.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Mini Fitting - Switch Mounting Platform S-14【1-10 Pieces Per Package】

  Kameda Denki

  Fitting for mounting switches and knobs.
  
  [Features]
  S-14Z is a Z-type for easy retrofitting.
  S-14F can be mounted onto free rail (DIN rail) at any location.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Mini Bracket, Switch Mount, ZK【10 Pieces Per Package】

  Kameda Denki

  The ZK series of brackets is used to mount switches and volume controls.
  
  [Features]
  - A total of five different switch mounting hole sizes are provided: 9 φ, 13 φ, 22 φ, 25 φ, and 30 φ, providing compatibility with all switches and volume controls.
  - Each size supports both one mounting point and two mounting points; multiple mounting points of three or more are also supported by combining multiple instances of the above.
  - The switch mounting surface is wide, making mounting of nameplates easy.
  - For the 9 φ and 13 φ versions, there is a single small hole at the 0° and 90° positions for locking, so both vertical and horizontal uses are supported.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  MINI Canada duct mount【10 Pieces Per Package】

  Kameda Denki

  A tool for mounting a control panel rear door wiring duct.
  
  [Features]
  ・Inserting a metal bracket into the pilot lamp or operation switch to secure the duct avoids the need to place stud bolts.
  ・3 varieties for use with 22φ, 25φ, and 30φ.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Mini Bracket, Connection / Mounting【10 Pieces Per Package】

  Kameda Denki

  This is an auxiliary bracket for the mounting, connection, etc. of ducting, wiring, or small components.
  
  [Features]
  · All brackets include tap holes for component mounting, so there is no need for the use of nuts (excluding S-5).
  · S-11 and S-11B are used when directly connecting U-1 or U-26 (the S-11B includes a 9Φ hole rather than a tap hole).
  · The S-20-25 and S-20-32 are sturdy right-angle connection brackets. They can be used for anchoring heavy objects.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Wire Holding Clasp

  Kameda Denki

  A clasp for affixing high-voltage lines to epoxy insulators.
  
  [Features]
  - For wiring high-voltage switchboards, high-voltage support insulators, isolators, and shutoff switches.
  - Manufactured following the JIS standard for resin formation technology (JISC3851) for stable quality.
  - Smaller, lighter, more shock resistant, and provides better electrical and mechanical properties than traditional porcelain insulators.
  - EP-O wire clasp sold separately.

  • Volume Discount

  Days to Ship:	8 Days or more

Loading...