(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Ballpoint Hexagonal Bar Wrench (Short Stem Long Type)
Trusco Nakayama
[Features]
· High-torque, tough nickel-chrome-molybdenum steel has been used.
· Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
· Matte chrome plating.
· The hardness is HRC 55-60.
Days to Ship: | 12 Days or more |
---|
Ballpoint Hexagonal Bar Wrench Set (9 Set)【9 Pieces Per Package】
Trusco Nakayama
[Features]
· Each surface of the edge of the Allen wrench tip is evenly chamfered. Insertion into hex sockets has become easier than ever, and in addition, the chamfered angle is designed to fit the corners of the bottom of the hex socket for closer contact.
· Matte chrome plating.
· The hardness is HRC 52-56.
Days to Ship: | 8 Days or more |
---|
Stem Long Ball-Point Hex Wrench (Long Type)
Trusco Nakayama
[Features]
· Ideal for fastening in deep places.
· High-torque, tough nickel-chrome-molybdenum steel has been used.
· Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
· Matte chrome plating.
· The hardness is HRC 55-60.
· Ideal for fastening in deep places.
· High-torque, tough nickel-chrome-molybdenum steel has been used.
· Holder can be rotated to easily take out and put back different sizes of wrenches.
Days to Ship: | 8 Days or more |
---|
Trusco Nakayama
[Features]
· Made of chrome vanadium steel (Cr-V).
· The hardness is HRC 50-58.
Days to Ship: | 8 Days or more |
---|
"Torsion Hex Wrench" (Opposite Side and Angle Bent Type)
Trusco Nakayama
[Features]
· Since the underneck has a short design, the wrench can be easily inserted into and taken out of places where there is very little space above the bolt.
· The double-ended wrench has opposite-side bending and opposite-angle bending on each end, making it ideal for places with narrow openings. (Available with the range of 30°)
· The hardness is HRC 53-57.
· Made from chrome vanadium steel.
Days to Ship: | 7 Days or more |
---|
L-Shape Ball End Hex Key - 1.5mm to 14mm, TXB Series
Trusco Nakayama
Each surface of the edge of the Allen wrench tip is evenly chamfered. Compared to the standard product, it features outstanding high torque, durability, and abrasion resistance. Insertion into hex sockets has become easier than ever, and in addition, the chamfered angle is designed to fit the corners of the bottom of the hex socket for closer contact. Matte chrome plating.
Days to Ship: | 11 Days or more |
---|
Ballpoint Hexagonal Bar Wrench【8 Pieces Per Package】
Trusco Nakayama
[Features]
· Each surface of the edge of the Allen wrench tip is evenly chamfered. Insertion into hex sockets has become easier than ever, and in addition, the chamfered angle is considered to fit the corners of the bottom of the hex socket for closer contact.
· The hardness is HRC 54-59.
· Made from chrome vanadium steel.
Days to Ship: | 9 Days or more |
---|
Ballpoint Hexagonal Bar Wrench (Long Type)
Trusco Nakayama
[Features]
· Easily catches screws, allowing them to be quickly and easily fastened without wasted time.
· The hardness is HRC 54-59.
· Made from chrome vanadium steel.
Days to Ship: | 8 Days or more |
---|
Ballpoint Hexagonal Bar Wrench (Long Type)_Black Oxide【9-12 Pieces Per Package】
Trusco Nakayama
[Features]
· Holder can be rotated to easily take out and put back different sizes of hex wrenches.
· This product has black oxide surface processing.
· The hardness is HRC 52-56.
Days to Ship: | 7 Days or more |
---|
Ballpoint Hexagonal Bar Wrench (Short Type)
Trusco Nakayama
[Features]
· Holder can be rotated to easily take out and put back different sizes of hex wrenches.
· This product has black oxide surface processing.
· The hardness is HRC 50-58.
Days to Ship: | 8 Days or more |
---|
Ballpoint Hexagonal Bar Wrench (with Magic Ring)
Trusco Nakayama
[Features]
· Because a spring steel ring is attached to the ballpoint portion, it catches and holds on tight to hex screws. (Patent Acquired: No. 3151178)
· Made of chrome plated chrome vanadium steel processed up to HRC57 to 60.
Days to Ship: | 7 Days or more |
---|
Ballpoint Hexagonal Bar Wrench (with Magic Ring)
Trusco Nakayama
[Features]
· Because a spring steel ring is attached to the ballpoint portion, it catches and holds on tight to hex screws. (Patent Acquired: No. 3151178)
· Made of chrome plated chrome vanadium steel processed up to HRC57 to 60.
Days to Ship: | 7 Days or more |
---|
"Ball-Point Hex Wrench" (with Catcher Ball)
Trusco Nakayama
[Features]
· Since the neck length is approximately 1/2 the standard type, it can be used for working in narrow places.
· A ball point type with catcher ball on the tip, which boasts excellent workability in narrow places. (3 mm or more)
· It has a diagonal curve.
· The hardness is HRC 53-57.
[Applications]
· Tightening of screws in narrow spaces.
Days to Ship: | 9 Days or more |
---|
"Long Ball-Point Hex Wrench" (with Catcher Ball)
Trusco Nakayama
[Features]
· Since the neck length is approximately 1/2 the standard type, it can be used for working in narrow places.
· A ball point type with catcher ball on the tip, which boasts excellent workability in narrow places. (3 mm or more)
· The hardness is HRC 53-57.
[Applications]
· Tightening of screws in narrow spaces.
Days to Ship: | 9 Days or more |
---|
"Short-Neck 100° Long Ball-Point Hex Wrench" (with Catcher Ball)
Trusco Nakayama
[Features]
· In order to prevent fingertips from touching the work surface, the bend angle is increased from the conventional 90° to 100° for better usability.
· Made from chrome vanadium steel.
· The length in the short direction is set to approximately half the conventional standard, extremely effective for working in confined spaces.
· Equipped with a catcher ball at the tip (3 mm or more).
· The hardness is HRC 53-57.
[Applications]
· Tightening and loosening work for hex socket bolts and hex socket set screws.
Days to Ship: | 8 Days or more |
---|
T-Shape Black Oxide Ball End Hex Key - 5mm
Trusco Nakayama
[Features]
· Suitable for machine maintenance and maintenance repair work.
· Can be used with one side of the ballpoint portion tilted 25°.
· T-shaped handle is easy to grasp.
· This product has black oxide surface processing.
· The hardness is HRC 50-57.
[Applications]
· Suitable for machine maintenance and maintenance repair work.
Days to Ship: | 7 Days or more |
---|
T-Shape Black Oxide Ball End Hex Key - 6mm
Trusco Nakayama
[Features]
· Suitable for machine maintenance and maintenance repair work.
· Can be used with one side of the ballpoint portion tilted 25°.
· T-shaped handle is easy to grasp.
· This product has black oxide surface processing.
· The hardness is HRC 50-57.
[Applications]
· Suitable for machine maintenance and maintenance repair work.
Days to Ship: | 7 Days or more |
---|
T Handle Ball Point Hex Wrench
Trusco Nakayama
[Features]
· T handle type 2-point fastening type.
· The ball point part can be tilted to one corner at angle of 25° and the tool shows its strength when working in confined areas which are normally out of reach.
· The hardness is HRC 45-57.
Days to Ship: | 8 Days or more |
---|
Hex Wrench【7 Pieces Per Package】
Trusco Nakayama
[Features]
· Use the shorter end and hold the longer end to tighten with greater force. Use the longer end and hold the shorter end to handle the product to tighten at greater rotating speed.
· The hardness is HRC 54-59.
· Made from chrome vanadium steel.
Days to Ship: | 7 Days or more |
---|
Trusco Nakayama
[Features]
· Made of chrome vanadium steel (Cr-V).
· The hardness is HRC 50-58.
Days to Ship: | 8 Days or more |
---|
Hex Wrench Set (7 Pieces per Set, Knife Type)
Trusco Nakayama
[Features]
· Hex bar wrench and grip can be fixed at 90° for easy operation.
· Pull out just the sizes required just like pocketknives.
· Folding type is convenient for carrying.
· The hardness is HRC 50-58.
[Applications]
· For tightening and loosening hex socket bolts.
Days to Ship: | 12 Days or more |
---|
"Short Multifunctional Torsion Wrench" (Opposite Side and Angle Bent Type)
Trusco Nakayama
[Features]
· Both ends are bent toward the opposite side and opposite corner, and it is possible to use at swing angle 30°.
· It is useful for working in a small place where the space for rotating a hex wrench cannot be secured adequately.
· The hardness is HRC 53-57.
· Made of general chrome vanadium steel.
· Short type torsion wrench TTX-9S.
[Applications]
· Tightening of screws in narrow spaces.
Days to Ship: | 8 Days or more |
---|
Trusco Nakayama
[Features]
· Convenient for attachment/removal of hex socket bolts mounted in deep places.
· T-shaped handle is easy to grasp.
· This product has black oxide surface processing.
· The hardness is HRC 50-57.
[Applications]
· For tightening and loosening hex socket bolts.
Days to Ship: | 7 Days or more |
---|
Stainless Steel Ball Point Hex Wrench (Standard Type)【9 Pieces Per Package】
Trusco Nakayama
A ballpoint L type wrench made of stainless steel and featuring outstanding corrosion resistance, chemical resistance, and shock resistance. A ballpoint type that can be used at an approximately 25° slant. Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
Days to Ship: | 8 Days or more |
---|
Stainless Steel Ball Point Hex Wrench (Long Type)【9 Pieces Per Package】
Trusco Nakayama
A long ballpoint L type wrench made of stainless steel and featuring outstanding corrosion resistance, chemical resistance, and shock resistance. A ballpoint type that can be used at an approximately 25° slant. Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
Days to Ship: | 8 Days or more |
---|
Ballpoint Hexagonal Bar Wrench (Inch Size)
Trusco Nakayama
Machined with a ball point, it can be used tilted by approximately 25°, speeding up temporary tightening of bolts, and increasing workability. Black oxide treated. Made from chrome vanadium steel.
Days to Ship: | 8 Days or more |
---|
T-Shaped Handle Ball-Point Hex Wrench
Trusco Nakayama
T handle type 2-point fastening type. The ball point part can be tilted to one corner at angle of 25° and the tool shows its strength when working in confined areas which are normally out of reach. Hardness is HRC 55 to 60. Made from chrome vanadium steel.
Days to Ship: | 8 Days or more |
---|
Trusco Nakayama
Both ends are chamfered which makes it easy to insert into hex sockets. Stable quality is provided by excellent heat treatment. The surface features a black oxide finish. Made from chrome vanadium steel.
Days to Ship: | 9 Days or more |
---|
Square Bent Ball-Pointed Hex Wrench Set
Trusco Nakayama
[Features]
· It is a hexagonal bar wrench rotated by 30° with consideration for ease of use.
· The special processing technology provides high durability and abrasion resistance.
· Final tightening can also be performed with the ball point part.
Days to Ship: | 8 Days or more |
---|
Square Bent Ball-Pointed Hex Wrench
Trusco Nakayama
[Features]
· It is a hexagonal bar wrench rotated by 30° with consideration for ease of use.
· The special processing technology provides high durability and abrasion resistance.
· Final tightening can also be performed with the ball point part.
Days to Ship: | 11 Days or more |
---|
Hex Wrench Set (Pouch Type)【16 Pieces Per Package】
Trusco Nakayama
Accessory: Pouch
Hardness: HRC52-56
Jan Code: 4989999332513
Mass: 3000
Material: Chrome Vanadium Steel (Cr-V), Surface Processing: Black Oxide Finish
Model: L-shaped Hex Wrench
Note: The product in the image is an example of a set. The 16 pc. set will be delivered.
Set Content: 16
Set/Single Item: Set Product
Tip Model: Standard Type
Trusco Code: 488-9738
For complete product overview and details on L-Shape Hex Key Set - Black Oxide, 16 Piece Set, 1.5mm to 19mm see the sections below:
Days to Ship: | 8 Days or more |
---|
Half-Ball Hex Wrench Set (Semi-Long)
Trusco Nakayama
[Features]
· The tip of the short side has undergone half ball point processing. The approach to the hex sockets is easier than the conventional product as a half ball is used.
· Half ball finish allows achievement of easy insertion and the same level of torque transferability.
· The screw can be turned from a maximum slope degree of 32°.
· It utilizes high-quality special alloy chrome vanadium steel (SNCM20V).
· In order to ensure homogeneous and highly accurate tempering (heat treatment) hardness (HRC 60° ±1°), a continuous furnace was intentionally not used, while a sealed-quench furnace / non-oxidizing, decarburizing correction quenching method has been adopted.
· The surface processing of special chrome plating exerts excellent wear resistance and prevents rust over a long period of time.
· Final tightening can be performed with a ballpoint wrench by using the pipe handle.
· Partial painting is done so that the size can be distinguished at a glance based on color.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Model |
Tip Model |
Two-sided Width Size(mm) |
Two-sided Width Size(Inch) |
Single Item / Set |
Total Length (L Size)(mm) |
Hex Neck Length (H Size) L-Model Only(mm) |
Brand | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Ballpoint Hexagonal Bar Wrench Set (9 Set)【9 Pieces Per Package】 | Ballpoint Hexagonal Bar Wrench (Long Type)_Black Oxide【9-12 Pieces Per Package】 | "Short-Neck 100° Long Ball-Point Hex Wrench" (with Catcher Ball) | "Short Multifunctional Torsion Wrench" (Opposite Side and Angle Bent Type) | Stainless Steel Ball Point Hex Wrench (Standard Type)【9 Pieces Per Package】 | Stainless Steel Ball Point Hex Wrench (Long Type)【9 Pieces Per Package】 | ||||||||||||||||||||||||||
Days to Ship | 12 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 7 Days or more | 11 Days or more | 9 Days or more | 8 Days or more | 7 Days or more | 8 Days or more | 7 Days or more | 7 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 7 Days or more | 7 Days or more | 8 Days or more | 7 Days or more | 8 Days or more | 12 Days or more | 8 Days or more | 7 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 8 Days or more |
Model | L-shaped Hex Wrench | L-shaped Hex Wrench | L-shaped Hex Wrench | L-shaped Hex Wrench | L-shaped Hex Wrench | L-shaped Hex Wrench | L-shaped Hex Wrench | L-shaped Hex Wrench | L-shaped Hex Wrench | L-shaped Hex Wrench | L-shaped Hex Wrench | L-shaped Hex Wrench | L-shaped Hex Wrench | L-shaped Hex Wrench | L-shaped Hex Wrench | T Shape | T Shape | T Shape | L-shaped Hex Wrench | L-shaped Hex Wrench | Knife Type | L-shaped Hex Wrench | T Shape | L-shaped Hex Wrench | L-shaped Hex Wrench | L-shaped Hex Wrench | T Shape | L-shaped Hex Wrench | L-shaped Hex Wrench | L-shaped Hex Wrench | L-shaped Hex Wrench | L-shaped Hex Wrench |
Tip Model | Ball Point | Ball Point | Ball Point | Standard Type | Standard Type | Ball Point | Ball Point | Ball Point | Ball Point | Ball Point | Ball Point | Ball Point | Ball Point | Ball Point | Ball Point | Ball Point | Ball Point | Ball Point | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Ball Point | Ball Point | Ball Point | Ball Point | Standard Type | Ball Point | Ball Point | Standard Type | Ball Point |
Two-sided Width Size(mm) | 3 | 1.5 ~ 10 | 2.5 | 22 ~ 27 | 1.5 ~ 10 | 8 | 1.5 ~ 8 | 19 | 1.5 ~ 10 | 8 | 3 | 6 | 1.5 ~ 10 | 1.5 ~ 10 | 1.5 ~ 10 | 5 | 6 | 3 ~ 6 | 1.5 ~ 6 | 27 | 1.5 ~ 6 | 1.5 ~ 10 | 3 | 1.5 ~ 10 | 1.5 ~ 10 | - | 2 ~ 10 | - | - | - | - | - |
Two-sided Width Size(Inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/16 | - | 1/4 | - | - | - | - |
Single Item / Set | Single Item | Set Product | Single Item | Single Item | Single Item / Set Product | Single Item | Set Product | Single Item | Set Product | Single Item | Single Item | Single Item | Set Product | Set Product | Set Product | Single Item | Single Item | Single Item | Set Product | Single Item | Set Product | Single Item / Set Product | Single Item | Set Product | Set Product | Single Item | Set Product | Single Item | Set Product | Single Item | Set Product | Set Product |
Total Length (L Size)(mm) | 126 | - | 112 | 330 ~ 420 | 90 ~ 224 | 156 | - | 360 | - | 100 | 128 | 184 | - | - | - | 190 | 230 | 153 ~ 187 | - | 250 | - | 50 ~ 125 | 150 | - | - | 77 | - | 135 | - | 91 | - | - |
Hex Neck Length (H Size) L-Model Only(mm) | 9 | - | 36 | 80 ~ 100 | 6 ~ 27.5 | 36 | - | 70 | - | 36 | 20 | 32 | - | - | - | - | - | - | - | 100 | - | 6 ~ 27.5 | - | - | - | 14 | - | 28 | - | 16 | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy