(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
The hollow part is a screw hole, which improves maintenance compared to press-fit. Since the screw can be tightened from the top of the head, it can be used in places where screws cannot be used from the back of the locating pin. Configurable P/G dimensions. Options available in tool steel or stainless steel, additionally configurable hardened heat treatment and/or hard chrome or black oxide surface treatment.
Part Number
Configured Part Number is shown.
Type | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness |
LPZ | 1045 Carbon Steel | - | Treated Hardness: 45~50HRC |
LPZB | 1045 Carbon Steel | Black Oxide | Treated Hardness: 45~50HRC |
LPZR | 1045 Carbon Steel | Hard Chrome Plating | Treated Hardness: 45~50HRC Plating Hardness :750 HV min. |
LPZS | 304 Stainless Steel | - | - |
LPZH | 304 Stainless Steel | Hard Chrome Plating | Plating Hardness :750 HV min. |
LPZC | 440C or 420 Stainless Steel | - | Treated Hardness: 50~55HRC |
Part Number | - | P | - | B | - | G | |
LPZ5 JPMA15 LBNA20 | - - | P16.00 P30.0 | - - | B25.5 B10 | - | G15 | (Screw Mounted) (Pilot) (Large Screw Mounted) |
Part Number | P 0.01mm Increment | B 0.1mm Increment | G 1mm Increment | d1 | d2 | H | Applicable Screw | ||
Type | No. | ||||||||
LPZ LPZB LPZR | LPZS LPZH LPZC | 3 | 11.00~15.00 | 10.0~25.0 | 9≤G | 3.5 | 6.5 | 4 | M3 |
4 | 12.00~20.00 | 10.0~25.0 | 10≤G | 4.5 | 8 | 5 | M4 | ||
5 | 14.00~20.00 | 10.0~30.0 | 12≤G | 5.5 | 9.5 | 6 | M5 | ||
6 | 15.00~25.00 | 12.0~40.0 | 13≤G | 6.5 | 11 | 7 | M6 | ||
8 | 18.00~25.00 | 14.0~50.0 | 16≤G | 9 | 14 | 9 | M8 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
LPZ3-P[9-15/0.01]-B[10-25/0.1]-G[8-14/1] |
LPZ4-P[12-20/0.01]-B[10-25/0.1]-G[10-19/1] |
LPZ5-P[14-20/0.01]-B[10-30/0.1]-G[12-19/1] |
LPZ6-P[15-25/0.01]-B[12-40/0.1]-G[13-24/1] |
LPZ8-P[18-25/0.01]-B[14-50/0.1]-G[16-24/1] |
LPZB3-P[9-15/0.01]-B[10-25/0.1]-G[8-14/1] |
LPZB4-P[12-20/0.01]-B[10-25/0.1]-G[10-19/1] |
LPZB5-P[14-20/0.01]-B[10-30/0.1]-G[12-19/1] |
LPZB6-P[15-25/0.01]-B[12-40/0.1]-G[13-24/1] |
LPZB8-P[18-25/0.01]-B[14-50/0.1]-G[16-24/1] |
LPZC3-P[9-15/0.01]-B[10-25/0.1]-G[8-14/1] |
LPZC4-P[12-20/0.01]-B[10-25/0.1]-G[10-19/1] |
LPZC5-P[14-20/0.01]-B[10-30/0.1]-G[12-19/1] |
LPZC6-P[15-25/0.01]-B[12-40/0.1]-G[13-24/1] |
LPZC8-P[18-25/0.01]-B[14-50/0.1]-G[16-24/1] |
LPZH3-P[9-15/0.01]-B[10-25/0.1]-G[8-14/1] |
LPZH4-P[12-20/0.01]-B[10-25/0.1]-G[10-19/1] |
LPZH5-P[14-20/0.01]-B[10-30/0.1]-G[12-19/1] |
LPZH6-P[15-25/0.01]-B[12-40/0.1]-G[13-24/1] |
LPZH8-P[18-25/0.01]-B[14-50/0.1]-G[16-24/1] |
LPZR3-P[9-15/0.01]-B[10-25/0.1]-G[8-14/1] |
LPZR4-P[12-20/0.01]-B[10-25/0.1]-G[10-19/1] |
LPZR5-P[14-20/0.01]-B[10-30/0.1]-G[12-19/1] |
LPZR6-P[15-25/0.01]-B[12-40/0.1]-G[13-24/1] |
LPZR8-P[18-25/0.01]-B[14-50/0.1]-G[16-24/1] |
LPZS3-P[9-15/0.01]-B[10-25/0.1]-G[8-14/1] |
LPZS4-P[12-20/0.01]-B[10-25/0.1]-G[10-19/1] |
LPZS5-P[14-20/0.01]-B[10-30/0.1]-G[12-19/1] |
LPZS6-P[15-25/0.01]-B[12-40/0.1]-G[13-24/1] |
LPZS8-P[18-25/0.01]-B[14-50/0.1]-G[16-24/1] |
Loading...
Basic Shape | Screw Mounted | Head Shape | Round | Head Tip Shape | Tapered |
---|---|---|---|---|---|
Drive | Screw Mounted | Shank Style | Straight(Press Fit) | Tolerance of Positioning Side Outer Diameter | 0/-0.01 |
Shank Dia. Tolerance | 0/-0.01 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy