(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Large Head Locating Pins - Round head, flat tip, externally threaded shank (Hardened Stainless Steel).

Large Head Locating Pins - Round head, flat tip, externally threaded shank (Hardened Stainless Steel).
  • Spec Change

The externally threaded stem is held by a nut from the opposite side of the locating pin orientation. The pin material is hardened stainless steel (35HRC). P/L/B dimensions are configurable in high precision ranges.

PDF

Locating Pins - Hardened Stainless Steel Large Head - Flat End:
・Materials
[ M ]Material[ H ]HardnessThreaded
g6
High Hardness
Stainless Steel
35HRC~AFPFNA

Specifications

Part NumberD-P-L-B
AFPFNA5-P7.80-L8-B4.0
■Threaded
Part NumberP
0.01mm Increment
L
1mm Increment
B
0.1mm Increment
CM
(Coarse)
* Recommended Tightening Torque
N • cm
ML
TypeDD dim. Tolerance g6
AFPFNA3-0.002
-0.008
3.50~8.003~102.0~15.00.5M3 1474.5
4-0.004
-0.012
4.50~8.001M4 3336
5-0.004
-0.012
5.50~8.001M5 6767.5
6-0.004
-0.012
6.50~10.001M611569
8-0.005
-0.014
8.50~10.004~101M8280312
[ ! ]When L=3, C=0.5, ℓ1=1.
* Tightening torque (reference) will be within Strength Class of Tightening Torque on Technical Data >> P. 2297 (10.9). Not applicable when using locking materials or lock washers.

Price list

Alterations

Locating Pins - Hardened Stainless Steel Large Head - Flat End:

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
AFPFNA3-P[3.5-8/0.01]-L[0-10/1]-B[2-20/0.1]
AFPFNA4-P[4.5-9/0.01]-L[0-10/1]-B[2-30/0.1]
AFPFNA5-P[5.5-8/0.01]-L[0-10/1]-B[2-30/0.1]
AFPFNA6-P[6.5-12/0.01]-L[0-10/1]-B[2-30/0.1]
AFPFNA8-P[8.5-15/0.01]-L[0-10/1]-B[2-30/0.1]
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSMounted Side Outer Diameter D
(mm)
Thread Diameter M
(mm)
B
(mm)
L
(mm)
1 Piece(s)

10 Days or more

10332 ~ 200 ~ 10
1 Piece(s)

10 Days or more

10442 ~ 300 ~ 10
1 Piece(s)

10 Days or more

10552 ~ 300 ~ 10
1 Piece(s)

10 Days or more

10662 ~ 300 ~ 10
1 Piece(s)

10 Days or more

10882 ~ 300 ~ 10

Loading...

  1. 1

Lead Time

Support Information

Characteristics of locating pins in other forms

Product NameFeatureCatalog
Small Diameter Locating PinsLocating Pins with Ø4 or less diameter suitable for small works.Click here
Locating Pins for Height AdjustingLocating Pins with short head for thin PC boards.Click here
Nonmagnetic Locating PinsNonmagnetic Aluminum locating pins suitable for environments where magnetism must be avoided. Click here
Plastic Locating PinsPlastic Locating Pins prevent work damages.Click here
Height Adjusting PinsLocating Pins suitable for locating in vertical direction.Click here
Support PinsPins for use in higher position to avoid interferences.Click here

Basic Information

Basic Shape Large Head Head Shape Round Head Tip Shape Flat
Drive No Shank Style Male thread Material Hardened Stainless Steel
Heat Treatment No Surface Finish No Tolerance of Positioning Side Outer Diameter 0/-0.01
Shank Dia. Tolerance g6 Dimension Configurable Type P, L, B Dimensions Configurable

Additional Products in this Category

Tech Support