(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 p.m. 6/15/2024 to 8:00 a.m. (CDT) 6/16/2024. We apologize for the inconvenience.
Shoulder Locating Pins - Round or diamond shaped head, shank type and tip selectable.
- Spec Change
Locating Pins with 3 types of tip shape selectable.
- METRIC
- inCAD Components
Unit examples related to this product
Part Number
Configured Part Number is shown.
* The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on MISUMI 2019 catalog P.4015).Not applicable when using locking agents or spring washers.
・Materials
[ ! ]304 Stainless Steel may not be polished and may have no centering hole.
| Type | Mounting Shape | Material Code | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness |
| LP (Round) LPD (Diamond) | M (Standard) U (Tapped) X (Threaded) | J | ①O1 Tool Steel | - | Treated Hardness: 55~60HRC |
| G | ②O1 Tool Steel | Hard Chrome Plating | Hardness: 50~55HRC Plating Hardness: 750HV~ | ||
| Y | ③1045 Carbon Steel | - | Treated Hardness: 45~50HRC or more | ||
| B | ④1045 Carbon Steel | Black Oxide | Treated Hardness: 45~50HRC or more | ||
| R | ⑤1045 Carbon Steel | Hard Chrome Plating | Hardness: 45~50HRC Plating Hardness: 750HV~ | ||
| S | ⑥304 Stainless Steel | - | - | ||
| D | ⑦304 Stainless Steel | Hard Chrome Plating | Plating Hardness: 750HV~ | ||
| C | ⑧440C or 420 Stainless Steel | - | Treated Hardness: 50~55HRC |
Specifications
| Part Number | - | P | - | B | - | R | - | G | - | L | - | T | ||||||||
| Type | Fixed Part | Material | Tip | D | ||||||||||||||||
| LP LPD | U X | J J | B A | 8 10 | - - | P10.00 P11.98 | - - | B10.0 B5.0 | - | R10 | - | G8 | - - | L14 L10 | - - | T2.0 T5.0 | ||||
| Part Number | P 0.01mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | L 1mm Increment | T 0.5mm Increment | |||||
| Type | Mounting Shape | Material Code | Tip Shape | D | |||||||
| A Shape, C Shape only | B Shape only | M Shape, U Shape only | X Shape only | ||||||||
| LP (Round) LPD (Diamond) [ ! ]Applicable when D≥3. | M (Standard) U (Tapped) (D≥6) X (Threaded) (D≥3) | J G Y B R S D C | A B C | 2 | 2.50~4.00 | 1.5~25.0 | A Shape R≥P/2 C Shape R≤P/2 | B Shape G≤P | 2~6 | - | 1.0~10.0 |
| 3 | 3.50~6.00 | 2.0~25.0(10.0) | 3~8(6) | 0~8(6) | |||||||
| 4 | 3.50~7.00 | 2.0~25.0(10.0) | 3(4)~10(8) | 0~10(8) | |||||||
| 5 | 4.00~8.00 | 2.0~30.0(10.0) | 5~15(10) | 0~15(10) | |||||||
| 6 | 5.00~10.00 | 2.0~40.0(12.0) | 6(10)~15(12) | 0~15(12) | |||||||
| 8 | 6.00~11.00 | 2.0~40.0(15.0) | 8(14)~16 | 0~16 | |||||||
| 10 | 8.00~13.00 | 3.0~50.0(20.0) | 10(14)~20 | 0~20 | |||||||
| 12 | 10.00~15.00 | 3.0~50.0(20.0) | 12(14)~24 | 0~24 | |||||||
| 16 | 13.00~18.00 | 5.0~50.0(20.0) | 16~32 | 0~32 | |||||||
| 20 | 16.00~22.00 | 5.0~50.0(20.0) | 20~40 | 0~40 | |||||||
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| LPDMBB3-P[3.5-6/0.01]-B[2-10/0.1]-G[1-6/1]-L[3-6/1]-T[1-10/0.5] |
| LPDMBB4-P[3.5-7/0.01]-B[2-10/0.1]-G[1-7/1]-L[4-8/1]-T[1-10/0.5] |
| LPDMBB5-P[4-8/0.01]-B[2-10/0.1]-G[1-8/1]-L[5-10/1]-T[1-10/0.5] |
| LPDMBB6-P[5-10/0.01]-B[2-12/0.1]-G[1-10/1]-L[10-12/1]-T[1-10/0.5] |
| LPDMBB8-P[6-11/0.01]-B[2-15/0.1]-G[1-11/1]-L[14-16/1]-T[1-10/0.5] |
| LPDMBB10-P[8-13/0.01]-B[3-20/0.1]-G[1-13/1]-L[14-20/1]-T[1-10/0.5] |
| LPDMBB12-P[10-15/0.01]-B[3-20/0.1]-G[1-15/1]-L[14-24/1]-T[1-10/0.5] |
| LPDMBB16-P[13-18/0.01]-B[5-20/0.1]-G[1-18/1]-L[16-32/1]-T[1-10/0.5] |
| LPDMBB20-P[16-22/0.01]-B[5-20/0.1]-G[1-22/1]-L[20-40/1]-T[1-10/0.5] |
| LPDMCB3-P[3.5-6/0.01]-B[2-10/0.1]-G[1-6/1]-L[3-6/1]-T[1-10/0.5] |
| LPDMCB4-P[3.5-7/0.01]-B[2-10/0.1]-G[1-7/1]-L[4-8/1]-T[1-10/0.5] |
| LPDMCB5-P[4-8/0.01]-B[2-10/0.1]-G[1-8/1]-L[5-10/1]-T[1-10/0.5] |
| LPDMCB6-P[5-10/0.01]-B[2-12/0.1]-G[1-10/1]-L[10-12/1]-T[1-10/0.5] |
| LPDMCB8-P[6-11/0.01]-B[2-15/0.1]-G[1-11/1]-L[14-16/1]-T[1-10/0.5] |
| LPDMCB10-P[8-13/0.01]-B[3-20/0.1]-G[1-13/1]-L[14-20/1]-T[1-10/0.5] |
| LPDMCB12-P[10-15/0.01]-B[3-20/0.1]-G[1-15/1]-L[14-24/1]-T[1-10/0.5] |
| LPDMCB16-P[13-18/0.01]-B[5-20/0.1]-G[1-18/1]-L[16-32/1]-T[1-10/0.5] |
| LPDMCB20-P[16-22/0.01]-B[5-20/0.1]-G[1-22/1]-L[20-40/1]-T[1-10/0.5] |
| LPDMDB3-P[3.5-6/0.01]-B[2-10/0.1]-G[1-6/1]-L[3-6/1]-T[1-10/0.5] |
| LPDMDB4-P[3.5-7/0.01]-B[2-10/0.1]-G[1-7/1]-L[4-8/1]-T[1-10/0.5] |
| LPDMDB5-P[4-8/0.01]-B[2-10/0.1]-G[1-8/1]-L[5-10/1]-T[1-10/0.5] |
| LPDMDB6-P[5-10/0.01]-B[2-12/0.1]-G[1-10/1]-L[10-12/1]-T[1-10/0.5] |
| LPDMDB8-P[6-11/0.01]-B[2-15/0.1]-G[1-11/1]-L[14-16/1]-T[1-10/0.5] |
| LPDMDB10-P[8-13/0.01]-B[3-20/0.1]-G[1-13/1]-L[14-20/1]-T[1-10/0.5] |
| LPDMDB12-P[10-15/0.01]-B[3-20/0.1]-G[1-15/1]-L[14-24/1]-T[1-10/0.5] |
| LPDMDB16-P[13-18/0.01]-B[5-20/0.1]-G[1-18/1]-L[16-32/1]-T[1-10/0.5] |
| LPDMDB20-P[16-22/0.01]-B[5-20/0.1]-G[1-22/1]-L[20-40/1]-T[1-10/0.5] |
| LPDMGB3-P[3.5-6/0.01]-B[2-10/0.1]-G[1-6/1]-L[3-6/1]-T[1-10/0.5] |
| LPDMGB4-P[3.5-7/0.01]-B[2-10/0.1]-G[1-7/1]-L[4-8/1]-T[1-10/0.5] |
| LPDMGB5-P[4-8/0.01]-B[2-10/0.1]-G[1-8/1]-L[5-10/1]-T[1-10/0.5] |
| LPDMGB6-P[5-10/0.01]-B[2-12/0.1]-G[1-10/1]-L[10-12/1]-T[1-10/0.5] |
| LPDMGB8-P[6-11/0.01]-B[2-15/0.1]-G[1-11/1]-L[14-16/1]-T[1-10/0.5] |
| LPDMGB10-P[8-13/0.01]-B[3-20/0.1]-G[1-13/1]-L[14-20/1]-T[1-10/0.5] |
| LPDMGB12-P[10-15/0.01]-B[3-20/0.1]-G[1-15/1]-L[14-24/1]-T[1-10/0.5] |
| LPDMGB16-P[13-18/0.01]-B[5-20/0.1]-G[1-18/1]-L[16-32/1]-T[1-10/0.5] |
| LPDMGB20-P[16-22/0.01]-B[5-20/0.1]-G[1-22/1]-L[20-40/1]-T[1-10/0.5] |
| LPDMJB3-P[3.5-6/0.01]-B[2-10/0.1]-G[1-6/1]-L[3-6/1]-T[1-10/0.5] |
| LPDMJB4-P[3.5-7/0.01]-B[2-10/0.1]-G[1-7/1]-L[4-8/1]-T[1-10/0.5] |
| LPDMJB5-P[4-8/0.01]-B[2-10/0.1]-G[1-8/1]-L[5-10/1]-T[1-10/0.5] |
| LPDMJB6-P[5-10/0.01]-B[2-12/0.1]-G[1-10/1]-L[10-12/1]-T[1-10/0.5] |
| LPDMJB8-P[6-11/0.01]-B[2-15/0.1]-G[1-11/1]-L[14-16/1]-T[1-10/0.5] |
| LPDMJB10-P[8-13/0.01]-B[3-20/0.1]-G[1-13/1]-L[14-20/1]-T[1-10/0.5] |
| LPDMJB12-P[10-15/0.01]-B[3-20/0.1]-G[1-15/1]-L[14-24/1]-T[1-10/0.5] |
| LPDMJB16-P[13-18/0.01]-B[5-20/0.1]-G[1-18/1]-L[16-32/1]-T[1-10/0.5] |
| LPDMJB20-P[16-22/0.01]-B[5-20/0.1]-G[1-22/1]-L[20-40/1]-T[1-10/0.5] |
| LPDMRB3-P[3.5-6/0.01]-B[2-10/0.1]-G[1-6/1]-L[3-6/1]-T[1-10/0.5] |
| LPDMRB4-P[3.5-7/0.01]-B[2-10/0.1]-G[1-7/1]-L[4-8/1]-T[1-10/0.5] |
| LPDMRB5-P[4-8/0.01]-B[2-10/0.1]-G[1-8/1]-L[5-10/1]-T[1-10/0.5] |
| LPDMRB6-P[5-10/0.01]-B[2-12/0.1]-G[1-10/1]-L[10-12/1]-T[1-10/0.5] |
| LPDMRB8-P[6-11/0.01]-B[2-15/0.1]-G[1-11/1]-L[14-16/1]-T[1-10/0.5] |
| LPDMRB10-P[8-13/0.01]-B[3-20/0.1]-G[1-13/1]-L[14-20/1]-T[1-10/0.5] |
| LPDMRB12-P[10-15/0.01]-B[3-20/0.1]-G[1-15/1]-L[14-24/1]-T[1-10/0.5] |
| LPDMRB16-P[13-18/0.01]-B[5-20/0.1]-G[1-18/1]-L[16-32/1]-T[1-10/0.5] |
| LPDMRB20-P[16-22/0.01]-B[5-20/0.1]-G[1-22/1]-L[20-40/1]-T[1-10/0.5] |
| LPDMSB3-P[3.5-6/0.01]-B[2-10/0.1]-G[1-6/1]-L[3-6/1]-T[1-10/0.5] |
| LPDMSB4-P[3.5-7/0.01]-B[2-10/0.1]-G[1-7/1]-L[4-8/1]-T[1-10/0.5] |
| LPDMSB5-P[4-8/0.01]-B[2-10/0.1]-G[1-8/1]-L[5-10/1]-T[1-10/0.5] |
| LPDMSB6-P[5-10/0.01]-B[2-12/0.1]-G[1-10/1]-L[10-12/1]-T[1-10/0.5] |
| LPDMSB8-P[6-11/0.01]-B[2-15/0.1]-G[1-11/1]-L[14-16/1]-T[1-10/0.5] |
| LPDMSB10-P[8-13/0.01]-B[3-20/0.1]-G[1-13/1]-L[14-20/1]-T[1-10/0.5] |
Loading...
Basic Information
| Basic Shape | With Shoulder | Drive | No | Tolerance of Positioning Side Outer Diameter | 0/-0.01 |
|---|
Specification/Dimensions
-
Head Shape
-
Round -
Diamond
-
-
Shank Style
-
Straight(Press Fit) -
Female Thread -
Male thread
-
-
Material
- Steel
- Stainless Steel
- Steel
-
Heat Treatment
- No
- Hardened
-
Surface Finish
- None
- Black Oxide
- Hard Chrome Plating
- None
-
Positioning Side Outer Diameter P(mm)
-
Mounted Side Outer Diameter D(mm)
-
Shank Dia. Tolerance
-
Mounting Section Length L(mm)
-
G(mm)
-
Positioning Part Length B(mm)
-
R(mm)
-
T(mm)
-
type
- LPDMBA
- LPDMBB
- LPDMBC
- LPDMCA
- LPDMCB
- LPDMCC
- LPDMDA
- LPDMDB
- LPDMDC
- LPDMGA
- LPDMGB
- LPDMGC
- LPDMJA
- LPDMJB
- LPDMJC
- LPDMRA
- LPDMRB
- LPDMRC
- LPDMSA
- LPDMSB
- LPDMSC
- LPDMYA
- LPDMYB
- LPDMYC
- LPDUBA
- LPDUBB
- LPDUBC
- LPDUCA
- LPDUCB
- LPDUCC
- LPDUDA
- LPDUDB
- LPDUDC
- LPDUGA
- LPDUGB
- LPDUGC
- LPDUJA
- LPDUJB
- LPDUJC
- LPDURA
- LPDURB
- LPDURC
- LPDUSA
- LPDUSB
- LPDUSC
- LPDUYA
- LPDUYB
- LPDUYC
- LPDXBA
- LPDXBB
- LPDXBC
- LPDXCA
- LPDXCB
- LPDXCC
- LPDXDA
- LPDXDB
- LPDXDC
- LPDXGA
- LPDXGB
- LPDXGC
- LPDXJA
- LPDXJB
- LPDXJC
- LPDXRA
- LPDXRB
- LPDXRC
- LPDXSA
- LPDXSB
- LPDXSC
- LPDXYA
- LPDXYB
- LPDXYC
- LPMBA
- LPMBB
- LPMBC
- LPMCA
- LPMCB
- LPMCC
- LPMDA
- LPMDB
- LPMDC
- LPMGA
- LPMGB
- LPMGC
- LPMJA
- LPMJB
- LPMJC
- LPMRA
- LPMRB
- LPMRC
- LPMSA
- LPMSB
- LPMSC
- LPMYA
- LPMYB
- LPMYC
- LPUBA
- LPUBB
- LPUBC
- LPUCA
- LPUCB
- LPUCC
- LPUDA
- LPUDB
- LPUDC
- LPUGA
- LPUGB
- LPUGC
- LPUJA
- LPUJB
- LPUJC
- LPURA
- LPURB
- LPURC
- LPUSA
- LPUSB
- LPUSC
- LPUYA
- LPUYB
- LPUYC
- LPXBA
- LPXBB
- LPXBC
- LPXCA
- LPXCB
- LPXCC
- LPXDA
- LPXDB
- LPXDC
- LPXGA
- LPXGB
- LPXGC
- LPXJA
- LPXJB
- LPXJC
- LPXRA
- LPXRB
- LPXRC
- LPXSA
- LPXSB
- LPXSC
- LPXYA
- LPXYB
- LPXYC
-
Head Tip Shape
-
Tapered -
Taper R -
R
-
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 10 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Large Head Locating Pins - Round or diamond shaped head, tapered tip and externally threaded shank.
- Small Head Locating Pins - Round or diamond shaped head, tapered tip and straight shank.
- Locating Pin Holders - Round flange, flat tip for screw mounting, straight shank.
- Large Head Locating Pins - Round/diamond head, ball tip, straight shank, selectable tolerances.
- Large Head Locating Pins - Round shaped head, tapered tip and externally threaded shank, P/B/D/D/R/E/L configurable.
- Large Head Locating Pins - Round head, bullet tip and straight shank.
- Large Head Locating Pins - Round or diamond shaped head with tapered tip and stepped shank.
- Small Head Locating Pins - Round or diamond shaped head, with spherical tip and internally threaded shank.
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy