(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Locating Pins with 3 types of tip shape selectable.
Part Number
Configured Part Number is shown.
Material No. | Round | Diamond | Straight | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness |
① | LPGJ | LPDGJ | LPCJ | O1 Tool Steel | - | Treated Hardness: 55~60HRC |
② | LPGG | LPDGG | LPCG | O1 Tool Steel | Hard Chrome Plating | Hardness: 50~55HRC Plating Hardness: 750HV~ |
③ | LPG | LPDG | LPC | 1045 Carbon Steel | - | Treated Hardness: 45~50HRC |
④ | LPGB | - | LPCB | 1045 Carbon Steel | Black Oxide | Treated Hardness: 45~50HRC |
⑤ | LPGR | - | LPCR | 1045 Carbon Steel | Hard Chrome Plating | Treated Hardness: 45~50HRC Plating Hardness: 750HV~ |
⑥ | LPGS | LPDGS | LPCS | 304 Stainless Steel | - | - |
⑦ | LPGD | - | LPCD | 304 Stainless Steel | Hard Chrome Plating | Plating Hardness: 750HV~ |
⑧ | LPGC | LPDGC | LPCC | 440C or 420 Stainless Steel | - | Treated Hardness: 50~55HRC |
Part Number | - | P | - | B | - | R | - | G | - | L |
LPGA6 LPGB10 LPCA6 | - - - | P10.0 P16.0 P10.0 | - - - | B25.0 B50.0 B25.0 | - - | R6 R6 | - | G13 | - - | L6 L16 |
Part Number | P 0.01mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | L 1mm Increment | M (Coarse) | (W) | ||||
Type | Tip Shape | D | D Tolerance g6 | ||||||||
A Shape, C Shape only | B Shape only | ||||||||||
(Round) LPGJ LPGG LPG LPGB LPGR LPGS LPGD LPGC | (Diamond) LPDGJ LPDGG LPDG LPDGS LPDGC | A B C | 6 | -0.004 -0.012 | 6.50~12.00 | 2.0~40.0(12.0) | A Shape R≥P/2 C Shape R≤P/2 | B Shape G≤P | 6~12 | M3 | 3 |
6T | M2.6 | ||||||||||
8 | -0.005 -0.014 | 9.00~15.00 | 2.0~40.0(15.0) | 8~16 | M4 | 3.5 | |||||
10 | 11.00~20.00 | 3.0~50.0(20.0) | 10(12)~20 | M5 | 4 | ||||||
10T | 6(12)~16 | M4 | |||||||||
12 | -0.006 -0.017 | 13.00~20.00 | 3.0~50.0(20.0) | 12~24 | M5 | 5 | |||||
12T | 8(12)~18 | M4 | |||||||||
16 | 17.00~25.00 | 5.0~50.0(20.0) | 16~32 | M8 | 7 | ||||||
16T | 10(14)~24 | M6 | |||||||||
20 | -0.007 -0.020 | 21.00~35.00 | 5.0~50.0(20.0) | 20~40 | M8 | 9 | |||||
20T | 12(18)~30 | M6 |
D |
6 |
6T |
8 |
10 |
10T |
12 |
12T |
16 |
16T |
20 |
20T |
Part Number | P 0.1mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | ||
Type | Tip Shape | M | ||||
A Shape, C Shape only | B Shape only | |||||
LPCJ LPCG LPC LPCB LPCR LPCS LPCD LPCC | A B C | 3 | 6.0~10.0 | 10.0~25.0 | A Shape R≥P/2 C Shape R≤P/2 | B Shape G≤P |
4 | 7.0~12.0 | 11.0~25.0 | ||||
5 | 8.0~16.0 | 13.0~30.0 | ||||
6 | 9.0~20.0 | 15.0~40.0 | ||||
8 | 11.0~20.0 | 19.0~50.0 | ||||
10 | 14.0~20.0 | 23.0~50.0 | ||||
12 | 18.0~25.0 | 28.0~60.0 | ||||
16 | 22.0~30.0 | 35.0~60.0 | ||||
20 | 26.0~30.0 | 44.0~60.0 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
LPCA3-P[6-10/0.1]-B[10-25/0.1]-R[2-500/1] |
LPCA4-P[7-12/0.1]-B[11-25/0.1]-R[2-500/1] |
LPCA5-P[8-16/0.1]-B[13-30/0.1]-R[3-500/1] |
LPCA6-P[9-20/0.1]-B[15-40/0.1]-R[3-500/1] |
LPCA8-P[11-20/0.1]-B[19-50/0.1]-R[4-500/1] |
LPCA10-P[14-20/0.1]-B[23-50/0.1]-R[5-500/1] |
LPCA12-P[18-25/0.1]-B[28-60/0.1]-R[6-500/1] |
LPCA16-P[22-30/0.1]-B[35-60/0.1]-R[8-500/1] |
LPCA20-P[26-30/0.1]-B[44-60/0.1]-R[10-500/1] |
LPCB3-P[6-10/0.1]-B[10-25/0.1]-G[1-10/1] |
LPCB4-P[7-12/0.1]-B[11-25/0.1]-G[1-12/1] |
LPCB5-P[8-16/0.1]-B[13-30/0.1]-G[1-16/1] |
LPCB6-P[9-20/0.1]-B[15-40/0.1]-G[1-20/1] |
LPCB8-P[11-20/0.1]-B[19-50/0.1]-G[1-20/1] |
LPCB10-P[14-20/0.1]-B[23-50/0.1]-G[1-20/1] |
LPCB12-P[18-25/0.1]-B[28-60/0.1]-G[1-25/1] |
LPCB16-P[22-30/0.1]-B[35-60/0.1]-G[1-30/1] |
LPCB20-P[26-30/0.1]-B[44-60/0.1]-G[1-30/1] |
LPCBA3-P[6-10/0.1]-B[10-25/0.1]-R[2-500/1] |
LPCBA4-P[7-12/0.1]-B[11-25/0.1]-R[2-500/1] |
LPCBA5-P[8-16/0.1]-B[13-30/0.1]-R[3-500/1] |
LPCBA6-P[9-20/0.1]-B[15-40/0.1]-R[3-500/1] |
LPCBA8-P[11-20/0.1]-B[19-50/0.1]-R[4-500/1] |
LPCBA10-P[14-20/0.1]-B[23-50/0.1]-R[5-500/1] |
LPCBA12-P[18-25/0.1]-B[28-60/0.1]-R[6-500/1] |
LPCBA16-P[22-30/0.1]-B[35-60/0.1]-R[8-500/1] |
LPCBA20-P[26-30/0.1]-B[44-60/0.1]-R[10-500/1] |
LPCBB3-P[6-10/0.1]-B[10-25/0.1]-G[1-10/1] |
LPCBB4-P[7-12/0.1]-B[11-25/0.1]-G[1-12/1] |
LPCBB5-P[8-16/0.1]-B[13-30/0.1]-G[1-16/1] |
LPCBB6-P[9-20/0.1]-B[15-40/0.1]-G[1-20/1] |
LPCBB8-P[11-20/0.1]-B[19-50/0.1]-G[1-20/1] |
LPCBB10-P[14-20/0.1]-B[23-50/0.1]-G[1-20/1] |
LPCBB12-P[18-25/0.1]-B[28-60/0.1]-G[1-25/1] |
LPCBB16-P[22-30/0.1]-B[35-60/0.1]-G[1-30/1] |
LPCBB20-P[26-30/0.1]-B[44-60/0.1]-G[1-30/1] |
LPCBC3-P[6-10/0.1]-B[10-25/0.1]-R[1-5/1] |
LPCBC4-P[7-12/0.1]-B[11-25/0.1]-R[1-6/1] |
LPCBC5-P[8-16/0.1]-B[13-30/0.1]-R[1-8/1] |
LPCBC6-P[9-20/0.1]-B[15-40/0.1]-R[1-10/1] |
LPCBC8-P[11-20/0.1]-B[19-50/0.1]-R[1-10/1] |
LPCBC10-P[14-20/0.1]-B[23-50/0.1]-R[1-10/1] |
LPCBC12-P[18-25/0.1]-B[28-60/0.1]-R[1-12/1] |
LPCBC16-P[22-30/0.1]-B[35-60/0.1]-R[1-15/1] |
LPCBC20-P[26-30/0.1]-B[44-60/0.1]-R[1-15/1] |
LPCC3-P[6-10/0.1]-B[10-25/0.1]-R[1-5/1] |
LPCC4-P[7-12/0.1]-B[11-25/0.1]-R[1-6/1] |
LPCC5-P[8-16/0.1]-B[13-30/0.1]-R[1-8/1] |
LPCC6-P[9-20/0.1]-B[15-40/0.1]-R[1-10/1] |
LPCC8-P[11-20/0.1]-B[19-50/0.1]-R[1-10/1] |
LPCC10-P[14-20/0.1]-B[23-50/0.1]-R[1-10/1] |
LPCC12-P[18-25/0.1]-B[28-60/0.1]-R[1-12/1] |
LPCC16-P[22-30/0.1]-B[35-60/0.1]-R[1-15/1] |
LPCC20-P[26-30/0.1]-B[44-60/0.1]-R[1-15/1] |
LPCCA3-P[6-10/0.1]-B[10-25/0.1]-R[2-500/1] |
LPCCA4-P[7-12/0.1]-B[11-25/0.1]-R[2-500/1] |
LPCCA5-P[8-16/0.1]-B[13-30/0.1]-R[3-500/1] |
LPCCA6-P[9-20/0.1]-B[15-40/0.1]-R[3-500/1] |
LPCCA8-P[11-20/0.1]-B[19-50/0.1]-R[4-500/1] |
LPCCA10-P[14-20/0.1]-B[23-50/0.1]-R[5-500/1] |
Loading...
Drive | No | Shank Style | Female Thread | Tolerance of Positioning Side Outer Diameter | 0/-0.01 |
---|
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy