(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Has the Sphere-shaped head with no edge. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Part Number
Configured Part Number is shown.
Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type | Shape Code | ||||
P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | P Selectable | Except P Selectable | ||||
① | O1 Tool Steel | - | Treated Hardness: 60 ~ 63HRC | JPQN | JPQN | FPQN | FPQNL | BB (Round) | A (Round) D (Diamond) |
② | O1 Tool Steel | Hard Chrome Plating | Hardness: 50 ~ 55HRC Plating Hardness :750 HV min. | - | GJPQN | GFPQN | GFPQNL | ||
③ | 304 Stainless Steel | - | - | SJPQN | SJPQN | SFPQN | SFPQNL | ||
④ | 304 Stainless Steel | Hard Chrome Plating | Plating Hardness :750 HV min. | - | HJPQN | HFPQN | - | ||
⑤ | 440C or 420 Stainless Steel | - | Treated Hardness: 50 ~ 55HRC | CJPQN | CJPQN | CFPQN | CFPQNL | ||
⑥ | O1 Tool Steel | Buffed Surface | Treated Hardness: 60 ~ 63HRC | - | MJPQN | MFPQN | MFPQNL | ||
⑦ | O1 Tool Steel | Hard Chrome Plating + Buffed | Hardness: 50 ~ 55HRC Plating Hardness :750 HV min. | - | MGJPQN | MGFPQN | MGFPQNL | ||
⑧ | 440C or 420 Stainless Steel | Buffed Surface | Treated Hardness: 50 ~ 55HRC | - | MCJPQN | MCFPQN | MCFPQNL |
Part Number | - | P | - | L | - | B | - | ML |
JPQNBB3 FPQNA16 SFPQNLA10 | - - - | 5 P18.00 P11.97 | - - | L12 L5 | - - | B7.5 B5.0 | - | ML12 |
Part Number | P | L | B | M (Coarse) | ML | ||||||||||||||
Type | Shape | D | D Tolerance g6 | ||||||||||||||||
JPQN SJPQN CJPQN | BB (Round) | 3 | -0.002 -0.008 | 4 | 5 | 6 | 2 | 5 | M3 | 4.5 | |||||||||
4 | -0.004 -0.012 | 5 | 6 | 7 | 6 | M4 | 6 | ||||||||||||
5 | 6 | 7 | 8 | 3 | M5 | 7.5 | |||||||||||||
6 | 7 | 8 | 9 | 10 | 8 | M6 | 9 | ||||||||||||
8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 5 | M8 | 12 | ||||||||||
10 | 11 | 12 | 13 | 15 | 10 | M10 | 15 | ||||||||||||
12 | -0.006 -0.017 | 15 | 16 | 8 | M12 | 18 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | ML | (W) | |||
Type | Shape | D | D Tolerance g6 | ||||||
JPQN GJPQN SJPQN HJPQN CJPQN (Buff Finished) MJPQN MGJPQN MCJPQN | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2 | 5 | M3 | 4.5 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 6 | M4 | 6 | 1.8 | |||
5 | 5.50~8.00 | 3 | M5 | 7.5 | 2.2 | ||||
6 | 6.50~10.00 | 8 | M6 | 9 | 3.0 | ||||
8 | -0.005 -0.014 | 9.00~13.00 | 5 | M8 | 12 | 3.5 | |||
10 | 11.00~15.00 | 10 | M10 | 15 | 4.0 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | 8 | M12 | 18 | 5.0 | |||
16 | 17.00~25.00 | M16 | 24 | 7.0 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 15 | M20 | 30 | 9.0 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | ML | (W) | |||
Type | Shape | D | D Tolerance g6 | ||||||
FPQN GFPQN SFPQN HFPQN CFPQN (Buff Finished) MFPQN MGFPQN MCFPQN [ ! ]Applicable when D≥5. | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | M3 | 4.5 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | M4 | 6 | 1.8 | ||
5 | 5.50~8.00 | 3~10 | 2.0~10.0 | M5 | 7.5 | 2.2 | |||
6 | 6.50~10.00 | 3~10 | 2.0~12.0 | M6 | 9 | 3 | |||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 2.0~15.0 | M8 | 12 | 3.5 | ||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | M10 | 15 | 4 | |||
12 | -0.006 -0.017 | 13.00~18.00 | 8~15 | 3.0~20.0 | M12 | 18 | 5 | ||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | M16 | 24 | 7 | |||
20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | M20 | 30 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | M (Coarse) | (W) | |||
Type | Shape | D | D Tolerance g6 | ||||||
FPQNL GFPQNL SFPQNL CFPQNL (Buff Finished) MFPQNL MGFPQNL MCFPQNL [ ! ]Applicable when D≥5. | A (Round) D (Diamond) | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | 3~9 | M3 | 1.5 |
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | 4~12 | M4 | 1.8 | ||
5 | 5.50~8.00 | 3~10 | 2.0~10.0 | 5~15 | M5 | 2.2 | |||
6 | 6.50~10.00 | 3~10 | 2.0~12.0 | 6~18 | M6 | 3 | |||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 2.0~15.0 | 8~24 | M8 | 3.5 | ||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | 10~30 | M10 | 4 | |||
12 | -0.006 -0.017 | 13.00~18.00 | 8~15 | 3.0~20.0 | 12~30 | M12 | 5 | ||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | 16~40 | M16 | 7 | |||
20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | 20~40 | M20 | 9 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
CFPQNA3-P[3.5-8/0.01]-L[0-6/1]-B[2-10/0.1] |
CFPQNA4-P[4.5-8/0.01]-L[0-8/1]-B[2-10/0.1] |
CFPQNA5-P[5.5-8/0.01]-L[0-10/1]-B[2-15/0.1] |
CFPQNA6-P[6.5-10/0.01]-L[0-10/1]-B[2-15/0.1] |
CFPQNA8-P[8.5-15/0.01]-L[0-10/1]-B[2-30/0.1] |
CFPQNA10-P[11-17/0.01]-L[0-15/1]-B[3-30/0.1] |
CFPQNA12-P[13-20/0.01]-L[0-15/1]-B[3-30/0.1] |
CFPQNA16-P[17-27/0.01]-L[0-20/1]-B[5-30/0.1] |
CFPQNA20-P[22-30/0.01]-L[0-20/1]-B[5-30/0.1] |
CFPQND3-P[3.5-8/0.01]-L[0-6/1]-B[2-10/0.1] |
CFPQND4-P[4.5-8/0.01]-L[0-8/1]-B[2-10/0.1] |
CFPQND5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1] |
CFPQND6-P[6.5-10/0.01]-L[0-10/1]-B[2-15/0.1] |
CFPQND8-P[8.5-15/0.01]-L[0-10/1]-B[2-15/0.1] |
CFPQND10-P[11-17/0.01]-L[0-15/1]-B[3-25/0.1] |
CFPQND12-P[13-18/0.01]-L[0-15/1]-B[3-25/0.1] |
CFPQND16-P[17-27/0.01]-L[0-20/1]-B[5-30/0.1] |
CFPQND20-P[22-30/0.01]-L[0-20/1]-B[5-30/0.1] |
CFPQNLA3-P[3.5-6/0.01]-L[2-6/1]-B[2-10/0.1]-ML[3-9/1] |
CFPQNLA4-P[4.5-7/0.01]-L[2-8/1]-B[2-10/0.1]-ML[4-12/1] |
CFPQNLA5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1]-ML[5-15/1] |
CFPQNLA6-P[6.5-10/0.01]-L[3-10/1]-B[2-12/0.1]-ML[6-18/1] |
CFPQNLA8-P[9-13/0.01]-L[5-10/1]-B[2-15/0.1]-ML[8-24/1] |
CFPQNLA10-P[11-15/0.01]-L[5-15/1]-B[3-20/0.1]-ML[10-30/1] |
CFPQNLA12-P[13-18/0.01]-L[8-15/1]-B[3-20/0.1]-ML[12-30/1] |
CFPQNLA16-P[17-25/0.01]-L[8-20/1]-B[5-20/0.1]-ML[16-40/1] |
CFPQNLA20-P[22-30/0.01]-L[10-20/1]-B[5-20/0.1]-ML[20-40/1] |
CFPQNLD3-P[3.5-6/0.01]-L[2-6/1]-B[2-10/0.1]-ML[3-9/1] |
CFPQNLD4-P[4.5-7/0.01]-L[2-8/1]-B[2-10/0.1]-ML[4-12/1] |
CFPQNLD5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1]-ML[5-15/1] |
CFPQNLD6-P[6.5-10/0.01]-L[3-10/1]-B[2-12/0.1]-ML[6-18/1] |
CFPQNLD8-P[9-13/0.01]-L[5-10/1]-B[2-15/0.1]-ML[8-24/1] |
CFPQNLD10-P[11-15/0.01]-L[5-15/1]-B[3-20/0.1]-ML[10-30/1] |
CFPQNLD12-P[13-18/0.01]-L[8-15/1]-B[3-20/0.1]-ML[12-30/1] |
CFPQNLD16-P[17-25/0.01]-L[8-20/1]-B[5-20/0.1]-ML[16-40/1] |
CFPQNLD20-P[22-30/0.01]-L[10-20/1]-B[5-20/0.1]-ML[20-40/1] |
CJPQNA3-[3.5-6/0.01] |
CJPQNA4-[4.5-7/0.01] |
CJPQNA5-[5.5-8/0.01] |
CJPQNA6-[6.5-10/0.01] |
CJPQNA8-[9-13/0.01] |
CJPQNA10-[11-15/0.01] |
CJPQNA12-[13-18/0.01] |
CJPQNA16-[17-25/0.01] |
CJPQNA20-[22-30/0.01] |
CJPQNBB3-4 |
CJPQNBB3-5 |
CJPQNBB3-6 |
CJPQNBB4-5 |
CJPQNBB4-6 |
CJPQNBB4-7 |
CJPQNBB5-6 |
CJPQNBB5-7 |
CJPQNBB5-8 |
CJPQNBB6-7 |
CJPQNBB6-8 |
CJPQNBB6-9 |
CJPQNBB6-10 |
CJPQNBB8-9 |
CJPQNBB8-10 |
Loading...
Basic Shape | Large Head | Head Tip Shape | Spherical Surface | Drive | No |
---|---|---|---|---|---|
Shank Style | Male thread | Tolerance of Positioning Side Outer Diameter | 0/-0.01 | Shank Dia. Tolerance | g6 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy