(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Small Head Locating Pins - Round head, flat tip and internally threaded shank.
- Volume Discount
- Lead Time Reduction
Has the typically shaped head (Flat).
- METRIC
- inCAD Components
Unit examples related to this product
Part Number
Configured Part Number is shown.
・Materials
| Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type | ||
| P Selectable | P Configurable | P, L, B Configurable | ||||
| ① | O1 Tool Steel | - | Treated Hardness: 60~63HRC | JPDSTB | JPDSTC | FPDSTC |
| ② | O1 Tool Steel | Hard Chrome Plating | Hardness: 50~55HRC Plating Hardness: 750HV~ | - | - | GFPDSTC |
| ④ | 304 Stainless Steel | - | - | SJPDSTB | SJPDSTC | SFPDSTC |
| ⑥ | 440C or 420 Stainless Steel | - | Treated Hardness: 50~55HRC | - | CJPDSTC | CFPDSTC |
Specifications
| Part Number | - | P | - | L | - | B |
| JPDSTC6 FPDSTC6 | - - | 4.00 P4.00 | - | L10 | - | B5.5 |
■P Tolerance Table
| P | h6 |
| 4.00~6.00 | 0 -0.008 |
| 6.01~10.00 | 0 -0.009 |
| 10.01~18.00 | 0 -0.011 |
| 18.01~20.00 | 0 -0.013 |
■P Selectable
| Part Number | P | L | B | M (Coarse) | ℓ | C | ||||||
| Type | D | D Tolerance g6 | ||||||||||
| JPDSTB SJPDSTB | 6 | -0.004 -0.012 | 4 | 10 | 3 | M3 | 5 | 0.5 | ||||
| 8 | -0.005 -0.014 | 6 | 12 | 4 | M4 | 6 | 1 | |||||
| 10 | 8 | 16 | 5 | M5 | 8 | |||||||
| 12 | -0.006 -0.017 | 10 | 20 | 6 | 1.5 | |||||||
| 16 | 10 | 14 | 24 | 10 | M8 | 12 | 3 | |||||
■P Configurable
| Part Number | P 0.01mm Increment | L | B | M (Coarse Thread) | ℓ | C | ||
| Type | D | D Tolerance g6 | ||||||
| JPDSTC SJPDSTC CJPDSTC | 6 | -0.004 -0.012 | 4.00~6.00 | 10 | 3 | M3 | 5 | 0.5 |
| 6T | M2.6 | 4 | ||||||
| 8 | -0.005 -0.014 | 6.00~8.00 | 12 | 4 | M4 | 6 | 1 | |
| 10 | 7.00~10.00 | 16 | 5 | M5 | 8 | |||
| 12 | -0.006 -0.017 | 7.00~12.00 | 20 | 6 | 1.5 | |||
| 13 | 8.00~13.00 | 22 | 10 | M8 | 12 | 2 | ||
| 16 | 10.00~16.00 | 24 | 10 | 3 | ||||
| 20 | -0.007 -0.020 | 13.00~20.00 | 32 | 20 | ||||
■P, L, B Configurable
[ ! ]Pins of D dimension with T have one size smaller thread diameter and larger wall thickness. (Actual D dimension is the number without "T".)
[ ! ]Note the strength of under-head part. >> P.1309 [ ! ]Please confirm pilot hole depth on >> P.1309. Holes may go through.
* The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on MISUMI 2019 catalog P.4015). *Not applicable when using locking adhesives or lock washers.
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | ℓ | C | ||
| Type | D | D Tolerance g6 | ||||||
| FPDSTC GFPDSTC SFPDSTC CFPDSTC | 6 | -0.004 -0.012 | 4.00~6.00 | 8~17 | 2.0~15.0 | M3 | 5 | 0.5 |
| 6T | M2.6 | 4 | ||||||
| 8 | -0.005 -0.014 | 6.00~8.00 | 11~21 | 2.0~30.0 | M4 | 6 | 1 | |
| 10 | 7.00~10.00 | 11~23 | 3.0~30.0 | M5 | 8 | |||
| 10T | 8~18 | M4 | 6 | |||||
| 12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | 3.0~30.0 | M5 | 8 | 1.5 | |
| 12T | 8~18 | M4 | 6 | |||||
| 13 | 8.00~13.00 | 13~26 | 5.0~30.0 | M8 | 10 | 2 | ||
| 13T | 10~20 | M6 | 9 | |||||
| 16 | 10.00~16.00 | 16~32 | 5.0~30.0 | M8 | 12 | 3 | ||
| 16T | 10~24 | M6 | 9 | |||||
| 20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | 5.0~30.0 | M8 | 12 | ||
| 20T | 12~30 | M6 | 9 | |||||
[ ! ]Note the strength of under-head part. >> P.1309 [ ! ]Please confirm pilot hole depth on >> P.1309. Holes may go through.
* The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on MISUMI 2019 catalog P.4015). *Not applicable when using locking adhesives or lock washers.
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| CFPDSTC6-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1] |
| CFPDSTC6T-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1] |
| CFPDSTC8-P[6-8/0.01]-L[11-21/1]-B[2-30/0.1] |
| CFPDSTC10-P[7-10/0.01]-L[11-23/1]-B[3-30/0.1] |
| CFPDSTC10T-P[7-10/0.01]-L[8-18/1]-B[3-30/0.1] |
| CFPDSTC12-P[7-12/0.01]-L[12-24/1]-B[3-30/0.1] |
| CFPDSTC12T-P[7-12/0.01]-L[8-18/1]-B[3-30/0.1] |
| CFPDSTC13-P[8-13/0.01]-L[13-26/1]-B[5-30/0.1] |
| CFPDSTC13T-P[8-13/0.01]-L[10-20/1]-B[5-30/0.1] |
| CFPDSTC16-P[10-16/0.01]-L[16-32/1]-B[5-30/0.1] |
| CFPDSTC16T-P[10-16/0.01]-L[10-24/1]-B[5-30/0.1] |
| CFPDSTC20-P[13-20/0.01]-L[20-40/1]-B[5-30/0.1] |
| CFPDSTC20T-P[13-20/0.01]-L[12-30/1]-B[5-30/0.1] |
| CJPDSTC6-[4-6/0.01] |
| CJPDSTC6T-[4-6/0.01] |
| CJPDSTC8-[6-8/0.01] |
| CJPDSTC10-[7-10/0.01] |
| CJPDSTC12-[7-12/0.01] |
| CJPDSTC13-[8-13/0.01] |
| CJPDSTC16-[8-13/0.01] |
| CJPDSTC20-[8-13/0.01] |
| FPDSTC6-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1] |
| FPDSTC6T-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1] |
| FPDSTC8-P[6-8/0.01]-L[11-21/1]-B[2-30/0.1] |
| FPDSTC10-P[7-10/0.01]-L[11-23/1]-B[3-30/0.1] |
| FPDSTC10T-P[7-10/0.01]-L[8-18/1]-B[3-30/0.1] |
| FPDSTC12-P[7-12/0.01]-L[12-24/1]-B[3-30/0.1] |
| FPDSTC12T-P[7-12/0.01]-L[8-18/1]-B[3-30/0.1] |
| FPDSTC13-P[8-13/0.01]-L[13-26/1]-B[5-30/0.1] |
| FPDSTC13T-P[8-13/0.01]-L[10-20/1]-B[5-30/0.1] |
| FPDSTC16-P[10-16/0.01]-L[16-32/1]-B[5-30/0.1] |
| FPDSTC16T-P[10-16/0.01]-L[10-24/1]-B[5-30/0.1] |
| FPDSTC20-P[13-20/0.01]-L[20-40/1]-B[5-30/0.1] |
| FPDSTC20T-P[13-20/0.01]-L[12-30/1]-B[5-30/0.1] |
| GFPDSTC6-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1] |
| GFPDSTC6T-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1] |
| GFPDSTC8-P[6-8/0.01]-L[11-21/1]-B[2-30/0.1] |
| GFPDSTC10-P[7-10/0.01]-L[11-23/1]-B[3-30/0.1] |
| GFPDSTC10T-P[7-10/0.01]-L[8-18/1]-B[3-30/0.1] |
| GFPDSTC12-P[7-12/0.01]-L[12-24/1]-B[3-30/0.1] |
| GFPDSTC12T-P[7-12/0.01]-L[8-18/1]-B[3-30/0.1] |
| GFPDSTC13-P[8-13/0.01]-L[13-26/1]-B[5-30/0.1] |
| GFPDSTC13T-P[8-13/0.01]-L[10-20/1]-B[5-30/0.1] |
| GFPDSTC16-P[10-16/0.01]-L[16-32/1]-B[5-30/0.1] |
| GFPDSTC16T-P[10-16/0.01]-L[10-24/1]-B[5-30/0.1] |
| GFPDSTC20-P[13-20/0.01]-L[20-40/1]-B[5-30/0.1] |
| GFPDSTC20T-P[13-20/0.01]-L[12-30/1]-B[5-30/0.1] |
| JPDSTB6-4 |
| JPDSTB8-6 |
| JPDSTB10-8 |
| JPDSTB12-10 |
| JPDSTB16-10 |
| JPDSTB16-14 |
| JPDSTC6-[4-6/0.01] |
| JPDSTC6T-[4-6/0.01] |
| JPDSTC8-[6-8/0.01] |
| JPDSTC10-[7-10/0.01] |
| JPDSTC12-[7-12/0.01] |
| JPDSTC13-[8-13/0.01] |
| JPDSTC16-[8-13/0.01] |
Loading...
Basic Information
| Basic Shape | Small Head | Head Shape | Round | Head Tip Shape | Flat |
|---|---|---|---|---|---|
| Drive | No | Shank Style | Female Thread | Tolerance of Positioning Side Outer Diameter | h6 |
| Shank Dia. Tolerance | g6 |
Specification/Dimensions
-
Material
- Steel
- Stainless Steel
- Steel
-
Heat Treatment
- No
- Hardened
-
Surface Finish
- None
- Hard Chrome Plating
- None
-
Positioning Side Outer Diameter P(mm)
-
Mounted Side Outer Diameter D(mm)
-
Thread Diameter M(mm)
-
Mounting Section Length L(mm)
-
Positioning Portion Length B(mm)
-
Thread Length ML(mm)
-
Dimension Configurable Type
- P Dimension Configurable
- P Dimension Fixed
- P, L, B Dimensions Configurable
-
Positioning Part Length B(mm)
-
type
- CFPDSTC
- CJPDSTC
- FPDSTC
- GFPDSTC
- JPDSTB
- JPDSTC
- SFPDSTC
- SJPDSTB
- SJPDSTC
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Small Head Locating Pins - Round or diamond shaped head, tapered tip and straight shank.
- Large Head Locating Pins - Round head, selectable tip angle and type, externally threaded shank.
- Inch Shoulder Locating Pins - Round or diamond head, tapered tip, internally threaded shank, configurable P dimension.
- Large Head Locating Pins - Round/diamond head, tapered tip, straight shank, selectable tolerances.
- Small Head Locating Pins - Spherical shaped head with straight and smooth shank.
- Locating Pins with Configurable Head - Round or diamond shaped head with tapered tip and stepped shank.
- Shoulder Locating Pins - Round or diamond shaped head, tapered tip and internally threaded shank, P/L/B/T/T/H configurable.
- Straight Locating Pins - For collets, internally threaded type.
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy