(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Konishi Indexing Plungers
Type
-
-
-
With Ring -
Related Components -
-
-
Indexing Plungers - Return Type, without Hex Collar, IPN Series.
Konishi
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions. All screws are embedded into the device, only leaving the knob on the surface and making it look more attractive.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Indexing Plungers - Knob Type, Press Fit, IPW Series.
Konishi
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions when welding or fuse mounting.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Indexing Plungers - Knob Type, Flanged, IPF Series.
Konishi
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. An index plunger with a fixed countersunk screw.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Indexing Plungers - Knob Type, Return Type, IP Series.
Konishi
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Indexing Plungers - Knob type, retracted position, IP-2 series.
Konishi
Pull the knob and rotate it 90° to lock the product with the center pin in retracted state. Return the knob to its original position to release the lock; the center pin returns to its original position.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Indexing Plungers - Knobless, Press Fit, IPWN Series.
Konishi
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions when welding or fuse mounting.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Indexing Plunger - With knob, return type, IP-1-SUS series.
Konishi
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Indexing Plungers - With Clamp Ring, IPR series.
Konishi
Pulling the ring retracts the center pin; releasing it returns the center pin to its original position by using the force of the spring. Can be used to calculate and select the position of jigs.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Indexing Plungers - Knob type, retracted position IPL series.
Konishi
Pull the knob and rotate it 90° to lock the product with the center pin in retracted state. Return the knob to its original position to release the lock; the center pin returns to its original position.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Indexing Plungers - With ball shaped knob, IP-5 series.
Konishi
Indexing plungers with a grip ball attached to the knob.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Indexing Plungers - With T-handle, IP-6 series.
Konishi
Indexing plungers with no tee handle attached to the knob.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Indexing Plungers - Lever Type, Fine Thread, ILP Series.
Konishi
Rotate the lever 180° to retract the center pin and engage the lock. Use to calculate and adjust the position of jigs.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
Indexing Plunger - Knob Type, Flanged, IPFL Series.
Konishi
Pulling the knob and rotating it 90° locks the product with the center pin in a retracted state. Returning the knob to its original position releases the lock and the center pin returns to its original position. Flat head screw fixed type indexing plungers.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Indexing Plunger - With knob, retracted position type, IP-2-SUS series.
Konishi
Pull the knob and rotate it 90° to lock the product with the center pin in retracted state. Return the knob to its original position to release the lock; the center pin returns to its original position.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Indexing Plungers - Knob Type, Return Type, IP-1 Series.
Konishi
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Indexing Plungers - Without Knob, Without Hex Collar, IP-3 Series.
Konishi
Knobless indexing plungers.
For complete product overview and details on Indexing Plunger IP-3 see the sections below:- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Indexing Plungers - Without Knob, with Hex Collar, IP-4 Series.
Konishi
Knobless indexing plungers.
For complete product overview and details on Indexing Plunger IP-4 see the sections below:- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Indexing Plunger - Knob Type, Short, IPSL Series.
Konishi
[Features]
· Pulling the knob and rotating it by 90° locks the product with the center pin in a retracted state.
· Returning the knob to its original position releases the lock and the center pin returns to its original position.- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Indexing Plungers - Lever Type, Fine Thread, ILP-SUS Series.
Konishi
Rotate the lever 180° to retract the center pin and engage the lock. Use to calculate and adjust the position of jigs.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Type |
| Locking Mechanism |
| Mounting Method |
| Overall Length |
| Body Material |
| All Stainless |
| Nose Material |
| Body O.D./Thread M(mm) |
| Stroke S(mm) |
| Nose Surface Treatment |
| Nose Heat Treatment |
| Nose O.D. d(Ø) |
| Length L(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | Konishi | Konishi | Konishi | Konishi | Konishi | Konishi | Konishi | Konishi | Konishi | Konishi | Konishi | Konishi | Konishi | Konishi | Konishi | Konishi | Konishi | Konishi | Konishi |
| Product Series | Indexing Plungers - Return Type, without Hex Collar, IPN Series. | Indexing Plungers - Knob type, retracted position, IP-2 series. | Indexing Plungers - Knob type, retracted position IPL series. | Indexing Plunger - With knob, retracted position type, IP-2-SUS series. | Indexing Plungers - Without Knob, Without Hex Collar, IP-3 Series. | Indexing Plungers - Without Knob, with Hex Collar, IP-4 Series. | Indexing Plungers - Lever Type, Fine Thread, ILP-SUS Series. | ||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 10 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 10 Days or more | 9 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 9 Days or more |
| Type | Standard Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob | No Knob | Standard Knob | Special Knob | Standard Knob | Special Knob | Special Knob | Lever Type | Standard Knob | Standard Knob | Standard Knob | No Knob | No Knob | Standard Knob | Lever Type |
| Locking Mechanism | None | None | None | None | With Locking Nose | None | None | None | With Locking Nose | None | None | With Locking Nose | With Locking Nose | With Locking Nose | None | None | None | With Locking Nose | With Locking Nose |
| Mounting Method | Screw-In | Press Fit | Flange | Screw-In | Screw-In | Press Fit | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Flange | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In |
| Overall Length | Standard | Standard | Short | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Short | Standard | Standard | Standard | Standard | Short | Standard |
| Body Material | Steel / Stainless Steel | Steel | Zinc Die Cast | Steel | Steel | Steel | Stainless Steel | Steel | Steel | Steel | Steel | Steel | Zinc Die Cast | Stainless Steel | Steel | Steel | Steel | Steel | Stainless Steel |
| All Stainless | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant |
| Nose Material | Steel / Stainless Steel | Steel | Steel | Stainless Steel | Steel | Steel | Stainless Steel | Stainless Steel | Stainless Steel | Steel | Steel | Steel | Steel | Stainless Steel | Steel | Steel | Steel | Steel | Stainless Steel |
| Body O.D./Thread M(mm) | 10 ～ 20 | 12 ～ 18 | 10 ～ 12 | 6 ～ 12 | 8 ～ 16 | 18 | 8 ～ 16 | 6 ～ 12 | 6 ～ 12 | 10 ～ 20 | 12 ～ 20 | 16 ～ 20 | 10 ～ 12 | 8 ～ 16 | 8 ～ 16 | 10 ～ 20 | 10 ～ 16 | 12 | 16 ～ 20 |
| Stroke S(mm) | 5 ～ 10 | 5 ～ 8 | 6 ～ 18 | 4 ～ 8 | 4 ～ 8 | 8 | 4 ～ 8 | 4 ～ 8 | 4 ～ 8 | 5 ～ 10 | 6 ～ 10 | 10 ～ 12 | 6 ～ 18 | 4 ～ 8 | 4 ～ 8 | 5 ～ 10 | 5 ～ 8 | 6 | 10 ～ 12 |
| Nose Surface Treatment | None | None | None | None | None | None | None | None | None | None | None | Black Oxide | None | None | None | None | None | None | None |
| Nose Heat Treatment | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None |
| Nose O.D. d(Ø) | 5 ～ 10 | 5 ～ 8 | 6 ～ 8 | 4 ～ 8 | 4 ～ 8 | 8 | 4 ～ 8 | 4 ～ 8 | 4 ～ 8 | 5 ～ 10 | 6 ～ 10 | 6 ～ 12 | 6 ～ 8 | 4 ～ 8 | 4 ～ 8 | 5 ～ 10 | 5 ～ 8 | 6 | 10 ～ 12 |
| Length L(mm) | 45 ～ 80 | 45 ～ 69 | 37 ～ 54 | 30.5 ～ 59 | 43 ～ 79 | 54 | 39 ～ 71 | 34.5 ～ 71 | 33 ～ 63.5 | 46 ～ 84 | 65 ～ 92 | 56 ～ 69 | 37 ～ 54 | 43 ～ 79 | 39 ～ 71 | 33 ～ 63 | 33 ～ 54 | 45 | 56 ～ 69 |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Locking Mechanism
-
None
-
With Locking Nose
-
Without Locking Nose
-
None
-
Mounting Method
-
Overall Length
-
Body Material
- Steel
- Stainless Steel
- Zinc Die Cast
- Others
-
All Stainless
- Applicable
- Not Compliant
-
Nose Material
-
Metric / Inch
-
Body O.D./Thread M(mm)
-
Stroke S(mm)
-
Nose Surface Treatment
-
Nose Heat Treatment
-
Nose O.D. d(Ø)
-
Length L(mm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
- 14 Days or Less
- 16 Days or Less
- 29 Days or Less
- 34 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy