(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Large Head Locating Pins - Round head, flat tip and internally threaded shank.

Large Head Locating Pins - Round head, flat tip and internally threaded shank.
  • Volume Discount
  • Lead Time Reduction

Has the typically shaped head (Flat).

  • METRIC
  • inCAD Components
Locating Pins - Large Flat Head, Tapped, P Standard:Related Image
・Materials
Material
No.
[ M ]Material[ S ]Surface Treatment[ H ]HardnessType
P SelectableP ConfigurableP, L, B Configurable
O1 Tool Steel-Treated Hardness: 60~63HRCJPDTAJPDTCFPDTC
O1 Tool SteelHard Chrome PlatingHardness: 50~55HRC
Plating Hardness: 750HV~
GJPDTAGJPDTCGFPDTC
SKS3 Tool Steel or Equiv.----BFPDTC
304 Stainless Steel--SJPDTA-SFPDTC
440C or 420 Stainless Steel-Treated Hardness: 50~55HRCCJPDTA--
[ ! ]Some combinations are not available. Refer to the availability list to select the available combination.
 

Specifications

Part Number-P-L-B
JPDTA10
JPDTC10
FPDTC12T
-
-
-
14
14.25
P14.25


-


L18


-


B8.6
■P Tolerance Table
Ph6
5.50~6.000
-0.008
6.01~10.000
-0.009
10.01~18.000
-0.011
18.01~30.000
-0.013
■P Selectable
Part NumberPLBM
(Coarse)
C
TypeDD Tolerance g6
JPDTA
GJPDTA
SJPDTA
CJPDTA
6-0.004
-0.012
8, 10105M351.0
8-0.005
-0.014
12126M581.5
1012, 1416102
12-0.006
-0.017
162020
13182222M8123
16252425
20-0.007
-0.020
303230
■P Configurable
Part NumberP
0.01mm Increment
LBM
(Coarse)
C
TypeDD Tolerance g6
JPDTC
GJPDTC
5-0.004
-0.012
5.50~8.0084M231.0
66.50~10.00105M35
6TM2.64
8-0.005
-0.014
9.00~13.00126M581.5
8TM46
1011.00~15.001610M582
12-0.006
-0.017
13.00~16.002020
1314.00~18.002222M8123
1617.00~25.002425
20-0.007
-0.020
22.00~30.003230
■P, L, B Configurable
Part NumberP
0.01mm Increment
L
1mm Increment
B
0.1mm Increment
M (Coarse)C
TypeDD Tolerance g6
FPDTC
GFPDTC
BFPDTC
SFPDTC
5-0.004
-0.012
5.50~8.005~102.0~10.0M231.0
66.50~10.006~122.0~12.0M35
6TM2.64
8-0.005
-0.014
9.00~13.008~162.0~15.0M581.5
8T6~16M46
1011.00~15.0010~203.0~20.0M582
10T6~16M46
12-0.006
-0.017
13.00~16.0012~243.0~30.0M58
12T8~18M46
1314.00~18.0013~265.0~30.0M8123
13T8~20M69
1617.00~25.0016~325.0~35.0M812
16T10~24M69
20-0.007
-0.020
22.00~30.0020~405.0~40.0M812
20T12~30M69
[ ! ]Pins of D dimension with T have one size smaller thread diameter and larger wall thickness. (Actual D dimension is the number without "T".)
[ ! ]Note the strength of under-head part. >> P.1309 [ ! ]Please confirm pilot hole depth on >> P.1309. Holes may go through.
* The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on MISUMI 2019 catalog P.4015). *Not applicable when using locking adhesives or lock washers.

Price list

■P Selectable
DUnit Price
①O1 Tool Steel Hardened
JPDTA
②O1 Tool Steel (Hardened)
GJPDTA
④304 Stainless Steel
SJPDTA
⑥ 440C Stainless Steel
CJPDTA
6670900860910
8680910880940
10700940910970
12720970940-
13740990--
168901,2001,200-
201,0501,410--
■P Configurable
DUnit Price
①O1 Tool Steel Hardened
JPDTC
②O1 Tool Steel (Hardened)
GJPDTC
59701,160
69901,170
6T9901,170
81,0301,220
8T1,0301,220
101,0601,250
121,1001,310
131,1401,360
161,4201,690
201,7302,050
■P, L, B Configurable
DUnit Price
①O1 Tool Steel Hardened
FPDTC
②O1 Tool Steel (Hardened)
GFPDTC
③O1 Tool Steel
BFPDTC
④304 Stainless Steel
SFPDTC
51,2801,5601,0502,230
61,3301,5901,0702,270
6T1,3301,5901,0702,270
81,3801,6501,1002,350
8T1,3801,6501,1002,350
101,4301,7201,1402,430
10T1,400 1,680 1,110 2,380
121,4801,7701,1802,520
12T1,450 1,730 1,150 2,460
131,5301,8301,2202,590
13T1,490 1,790 1,190 2,530
161,9202,2901,5303,090
16T1,880 2,240 1,490 3,020
202,3302,7901,8703,500
20T2,280 2,730 1,830 3,430
Volume Discount Rate ([ ! ]Round down to nearest one yen) P.89
Quantity1~1920~3435~4950~99
Discount RateUnit Price5%10%18%
[ ! ]For orders larger than indicated quantity, please request a quotation.
[ ! ]For 50 or more identical pieces of in-stock items, please request a quotation.

Alterations

Locating Pins - Large Flat Head, Tapped, P Standard:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
BFPDTC5-P[5.5-8/0.01]-L[5-10/1]-B[1.5-15/0.1]
BFPDTC6-P[6.5-10/0.01]-L[6-12/1]-B[1.5-15/0.1]
BFPDTC6T-P[6.5-10/0.01]-L[6-12/1]-B[1.5-15/0.1]
BFPDTC8-P[8.5-15/0.01]-L[8-16/1]-B[1.5-30/0.1]
BFPDTC8T-P[8.5-15/0.01]-L[6-16/1]-B[1.5-30/0.1]
BFPDTC10-P[11-17/0.01]-L[10-20/1]-B[3-30/0.1]
BFPDTC10T-P[11-17/0.01]-L[6-16/1]-B[3-30/0.1]
BFPDTC12-P[13-18/0.01]-L[12-24/1]-B[3-30/0.1]
BFPDTC12T-P[13-18/0.01]-L[8-18/1]-B[3-30/0.1]
BFPDTC13-P[14-20/0.01]-L[13-26/1]-B[5-30/0.1]
BFPDTC13T-P[14-20/0.01]-L[8-20/1]-B[5-30/0.1]
BFPDTC16-P[17-27/0.01]-L[16-32/1]-B[5-35/0.1]
BFPDTC16T-P[17-27/0.01]-L[10-24/1]-B[5-35/0.1]
BFPDTC20-P[22-30/0.01]-L[20-40/1]-B[5-40/0.1]
BFPDTC20T-P[22-30/0.01]-L[12-30/1]-B[5-40/0.1]
CJPDTA6-8
CJPDTA6-10
CJPDTA8-12
CJPDTA10-12
CJPDTA10-14
FPDTC5-P[5.5-8/0.01]-L[5-10/1]-B[1.5-15/0.1]
FPDTC6-P[6.5-10/0.01]-L[6-12/1]-B[1.5-15/0.1]
FPDTC6T-P[6.5-10/0.01]-L[6-12/1]-B[1.5-15/0.1]
FPDTC8-P[8.5-15/0.01]-L[8-16/1]-B[1.5-30/0.1]
FPDTC8T-P[8.5-15/0.01]-L[6-16/1]-B[1.5-30/0.1]
FPDTC10-P[11-17/0.01]-L[10-20/1]-B[3-30/0.1]
FPDTC10T-P[11-17/0.01]-L[6-16/1]-B[3-30/0.1]
FPDTC12-P[13-18/0.01]-L[12-24/1]-B[3-30/0.1]
FPDTC12T-P[13-18/0.01]-L[8-18/1]-B[3-30/0.1]
FPDTC13-P[14-20/0.01]-L[13-26/1]-B[5-30/0.1]
FPDTC13T-P[14-20/0.01]-L[8-20/1]-B[5-30/0.1]
FPDTC16-P[17-27/0.01]-L[16-32/1]-B[5-35/0.1]
FPDTC16T-P[17-27/0.01]-L[10-24/1]-B[5-35/0.1]
FPDTC20-P[22-30/0.01]-L[20-40/1]-B[5-40/0.1]
FPDTC20T-P[22-30/0.01]-L[12-30/1]-B[5-40/0.1]
GFPDTC5-P[5.5-8/0.01]-L[5-10/1]-B[1.5-15/0.1]
GFPDTC6-P[6.5-10/0.01]-L[6-12/1]-B[1.5-15/0.1]
GFPDTC6T-P[6.5-10/0.01]-L[6-12/1]-B[1.5-15/0.1]
GFPDTC8-P[8.5-15/0.01]-L[8-16/1]-B[1.5-30/0.1]
GFPDTC8T-P[8.5-15/0.01]-L[6-16/1]-B[1.5-30/0.1]
GFPDTC10-P[11-17/0.01]-L[10-20/1]-B[3-30/0.1]
GFPDTC10T-P[11-17/0.01]-L[6-16/1]-B[3-30/0.1]
GFPDTC12-P[13-18/0.01]-L[12-24/1]-B[3-30/0.1]
GFPDTC12T-P[13-18/0.01]-L[8-18/1]-B[3-30/0.1]
GFPDTC13-P[14-20/0.01]-L[13-26/1]-B[5-30/0.1]
GFPDTC13T-P[14-20/0.01]-L[8-20/1]-B[5-30/0.1]
GFPDTC16-P[17-27/0.01]-L[16-32/1]-B[5-35/0.1]
GFPDTC16T-P[17-27/0.01]-L[10-24/1]-B[5-35/0.1]
GFPDTC20-P[22-30/0.01]-L[20-40/1]-B[5-40/0.1]
GFPDTC20T-P[22-30/0.01]-L[12-30/1]-B[5-40/0.1]
GJPDTA6-[8,​10]
GJPDTA8-12
GJPDTA10-[12,​14]
GJPDTA12-16
GJPDTA13-18
GJPDTA16-25
GJPDTA20-30
GJPDTC5-P[5-8/0.01]
GJPDTC6-[8-10/0.01]
GJPDTC6T
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSBasic Shape Head Shape Head Tip Shape Drive Shank Style Material Heat Treatment Surface Finish Positioning Side Outer Diameter P
(mm)
Tolerance of Positioning Side Outer Diameter Mounted Side Outer Diameter D
(mm)
Shank Dia. Tolerance Thread Diameter M
(mm)
Mounting Section Length L
(mm)
Positioning Portion Length B
(mm)
Thread Length ML
(mm)
Dimension Configurable Type Positioning Part Length B
(mm)
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelNo[None] No5.5 ~ 8h65g6-5 ~ 10--P, L, B Dimensions Configurable1.5 ~ 15
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelNo[None] No6.5 ~ 10h66g636 ~ 12--P, L, B Dimensions Configurable1.5 ~ 15
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelNo[None] No6.5 ~ 10h66Tg62.66 ~ 12--P, L, B Dimensions Configurable1.5 ~ 15
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelNo[None] No8.5 ~ 15h68g658 ~ 16--P, L, B Dimensions Configurable1.5 ~ 30
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelNo[None] No8.5 ~ 15h68Tg646 ~ 16--P, L, B Dimensions Configurable1.5 ~ 30
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelNo[None] No11 ~ 17h610g6510 ~ 20--P, L, B Dimensions Configurable3 ~ 30
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelNo[None] No11 ~ 17h610Tg646 ~ 16--P, L, B Dimensions Configurable3 ~ 30
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelNo[None] No13 ~ 18h612g6512 ~ 24--P, L, B Dimensions Configurable3 ~ 30
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelNo[None] No13 ~ 18h612Tg648 ~ 18--P, L, B Dimensions Configurable3 ~ 30
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelNo[None] No14 ~ 20h613g6813 ~ 26--P, L, B Dimensions Configurable5 ~ 30
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelNo[None] No14 ~ 20h613Tg668 ~ 20--P, L, B Dimensions Configurable5 ~ 30
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelNo[None] No17 ~ 27h616g6816 ~ 32--P, L, B Dimensions Configurable5 ~ 35
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelNo[None] No17 ~ 27h616Tg6610 ~ 24--P, L, B Dimensions Configurable5 ~ 35
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelNo[None] No22 ~ 30h620g6820 ~ 40--P, L, B Dimensions Configurable5 ~ 40
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelNo[None] No22 ~ 30h620Tg6612 ~ 30--P, L, B Dimensions Configurable5 ~ 40
1 Piece(s)Available

8 Days or more

10Large HeadRoundFlatNoFemale Thread[Stainless Steel] 440C or 420 Stainless SteelHardened[None] No8h66g6--105P Dimension Fixed-
1 Piece(s)Available

8 Days or more

10Large HeadRoundFlatNoFemale Thread[Stainless Steel] 440C or 420 Stainless SteelHardened[None] No10h66g6--105P Dimension Fixed-
1 Piece(s)Available

8 Days or more

10Large HeadRoundFlatNoFemale Thread[Stainless Steel] 440C or 420 Stainless SteelHardened[None] No12h68g6--126P Dimension Fixed-
1 Piece(s)Available

8 Days or more

10Large HeadRoundFlatNoFemale Thread[Stainless Steel] 440C or 420 Stainless SteelHardened[None] No12h610g6--1610P Dimension Fixed-
1 Piece(s)Available

8 Days or more

10Large HeadRoundFlatNoFemale Thread[Stainless Steel] 440C or 420 Stainless SteelHardened[None] No14h610g6--1610P Dimension Fixed-
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardened[None] No5.5 ~ 8h65g6-5 ~ 10--P, L, B Dimensions Configurable1.5 ~ 15
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardened[None] No6.5 ~ 10h66g636 ~ 12--P, L, B Dimensions Configurable1.5 ~ 15
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardened[None] No6.5 ~ 10h66Tg62.66 ~ 12--P, L, B Dimensions Configurable1.5 ~ 15
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardened[None] No8.5 ~ 15h68g658 ~ 16--P, L, B Dimensions Configurable1.5 ~ 30
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardened[None] No8.5 ~ 15h68Tg646 ~ 16--P, L, B Dimensions Configurable1.5 ~ 30
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardened[None] No11 ~ 17h610g6510 ~ 20--P, L, B Dimensions Configurable3 ~ 30
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardened[None] No11 ~ 17h610Tg646 ~ 16--P, L, B Dimensions Configurable3 ~ 30
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardened[None] No13 ~ 18h612g6512 ~ 24--P, L, B Dimensions Configurable3 ~ 30
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardened[None] No13 ~ 18h612Tg648 ~ 18--P, L, B Dimensions Configurable3 ~ 30
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardened[None] No14 ~ 20h613g6813 ~ 26--P, L, B Dimensions Configurable5 ~ 30
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardened[None] No14 ~ 20h613Tg668 ~ 20--P, L, B Dimensions Configurable5 ~ 30
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardened[None] No17 ~ 27h616g6816 ~ 32--P, L, B Dimensions Configurable5 ~ 35
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardened[None] No17 ~ 27h616Tg6610 ~ 24--P, L, B Dimensions Configurable5 ~ 35
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardened[None] No22 ~ 30h620g6820 ~ 40--P, L, B Dimensions Configurable5 ~ 40
1 Piece(s)

7 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardened[None] No22 ~ 30h620Tg6612 ~ 30--P, L, B Dimensions Configurable5 ~ 40
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating5.5 ~ 8h65g6-5 ~ 10--P, L, B Dimensions Configurable1.5 ~ 15
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating6.5 ~ 10h66g636 ~ 12--P, L, B Dimensions Configurable1.5 ~ 15
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating6.5 ~ 10h66Tg62.66 ~ 12--P, L, B Dimensions Configurable1.5 ~ 15
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating8.5 ~ 15h68g658 ~ 16--P, L, B Dimensions Configurable1.5 ~ 30
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating8.5 ~ 15h68Tg646 ~ 16--P, L, B Dimensions Configurable1.5 ~ 30
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating11 ~ 17h610g6510 ~ 20--P, L, B Dimensions Configurable3 ~ 30
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating11 ~ 17h610Tg646 ~ 16--P, L, B Dimensions Configurable3 ~ 30
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating13 ~ 18h612g6512 ~ 24--P, L, B Dimensions Configurable3 ~ 30
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating13 ~ 18h612Tg648 ~ 18--P, L, B Dimensions Configurable3 ~ 30
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating14 ~ 20h613g6813 ~ 26--P, L, B Dimensions Configurable5 ~ 30
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating14 ~ 20h613Tg668 ~ 20--P, L, B Dimensions Configurable5 ~ 30
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating17 ~ 27h616g6816 ~ 32--P, L, B Dimensions Configurable5 ~ 35
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating17 ~ 27h616Tg6610 ~ 24--P, L, B Dimensions Configurable5 ~ 35
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating22 ~ 30h620g6820 ~ 40--P, L, B Dimensions Configurable5 ~ 40
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating22 ~ 30h620Tg6612 ~ 30--P, L, B Dimensions Configurable5 ~ 40
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating8 ~ 10h66g6--105P Dimension Fixed-
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating12h68g6--126P Dimension Fixed-
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating12 ~ 14h610g6--1610P Dimension Fixed-
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating16h612g6--2020P Dimension Fixed-
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating18h613g6--2222P Dimension Fixed-
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating25h616g6--2425P Dimension Fixed-
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating30h620g6--3230P Dimension Fixed-
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating5 ~ 8h65g6--84P, L, B Dimensions Configurable-
1 Piece(s)

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating6 ~ 10h66g63-105P Dimension Configurable-
1 Piece(s)Available

10 Days or more

10Large HeadRoundFlatNoFemale Thread[Steel] O1 Tool SteelHardenedHard Chrome Plating-h66Tg62.6-105P Dimension Configurable-

Loading...

Support Information

Characteristics of locating pins in other forms

Product NameFeatureCatalog
Small Diameter Locating PinsLocating Pins with Ø4 or less diameter suitable for small works.Click here
Locating Pins for Height AdjustingLocating Pins with short head for thin PC boards.Click here
Nonmagnetic Locating PinsNonmagnetic Aluminum locating pins suitable for environments where magnetism must be avoided. Click here
Plastic Locating PinsPlastic Locating Pins prevent work damages.Click here
Height Adjusting PinsLocating Pins suitable for locating in vertical direction.Click here
Support PinsPins for use in higher position to avoid interferences.Click here
 

Additional Products in this Category

Complementary Products

MISUMI Unit Example related to this product

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.