(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Has the Sphere-shaped head with no edge. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Part Number
Configured Part Number is shown.
JPQSTB8-7
Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
① | O1 Tool Steel | - | Treated Hardness: 60 ~ 63HRC | JPQS | TB (Round) | JPQS | TA (Round) TD (Diamond) | FPQS | TA (Round) TD (Diamond) |
② | O1 Tool Steel | Hard Chrome Plating | Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPQS | GFPQS | |||
③ | 304 Stainless Steel | - | - | SJPQS | SJPQS | SFPQS | |||
⑤ | 440C or 420 Stainless Steel | - | Treated Hardness: 50 ~ 55HRC | - | CJPQS | CFPQS |
Part Number | - | P | - | L | - | B |
JPQSTA6 | - | 4.00 | ||||
FPQSTA6 | - | P4.00 | - | L10 | - | B5.5 |
Part Number | P | L | B | M (Coarse Thread) | ℓ | ||||||||
Type | Shape | D | D Tolerance g6 | ||||||||||
JPQS SJPQS | TB (Round) | 6 | -0.004 -0.012 | 4 | 5 | 10 | 5 | M3 | 5 | ||||
8 | -0.005 -0.014 | 6 | 7 | 15 | 6 | M5 | 8 | ||||||
10 | -0.006 -0.017 | 7 | 8 | 8 | |||||||||
13 | 8 | 10 | 22 | M8 | 12 | ||||||||
16 | 10 | 10 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | ℓ | (W) | |||
Type | Shape | D | D Tolerance g6 | ||||||
JPQS GJPQS SJPQS CJPQS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~ 5.00 | 10 | 5 | M2 | 3 | 1.2 |
6 | 4.00~ 6.00 | M3 | 5 | 1.5 | |||||
6T | M2.6 | 4 | |||||||
8 | -0.005 -0.014 | 6.00~ 8.00 | 15 | 6 | M5 | 8 | 1.8 | ||
8T | M4 | 6 | |||||||
10 | -0.006 -0.017 | 7.00~10.00 | 8 | M5 | 8 | 2.2 | |||
12 | 7.00~12.00 | 2.5 | |||||||
13 | 8.00~13.00 | 22 | M8 | 12 | 3 | ||||
16 | 10.00~16.00 | 10 | 4 | ||||||
20 | -0.007 -0.020 | 13.00~20.00 | 30 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | ℓ | (W) | |||
Type | Shape | D | D Tolerance g6 | ||||||
FPQS GFPQS SFPQS CFPQS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~ 5.00 | 8 ~10 | 2.0~10.0 | M2 | 3 | 1.2 |
6 | 4.00~ 6.00 | 8(9)~12 | 2.0~12.0 | M3 | 5 | 1.5 | |||
6T | M2.6 | 4 | |||||||
8 | -0.005 -0.014 | 6.00~ 8.00 | 11(12)~16 | 2.0~15.0 | M5 | 8 | 1.8 | ||
8T | M4 | 6 | |||||||
10 | 7.00~10.00 | 11(12)~20 | 3.0~20.0 | M5 | 8 | 2.2 | |||
10T | 8(12)~16 | M4 | 6 | ||||||
12 | -0.006 -0.017 | 7.00~12.00 | 12 ~24 | 3.0~20.0 | M5 | 8 | 2.5 | ||
12T | 8(12)~18 | M4 | 6 | ||||||
13 | 8.00~13.00 | 13(14)~26 | 5.0~20.0 | M8 | 10 | 3 | |||
13T | 10(14)~20 | M6 | 9 | ||||||
16 | 10.00~16.00 | 16 ~32 | 5.0~20.0 | M8 | 12 | 4 | |||
16T | 10(14)~24 | M6 | 9 | ||||||
20 | -0.007 -0.020 | 13.00~20.00 | 20 ~40 | 5.0~20.0 | M8 | 12 | 5 | ||
20T | 12(18)~30 | M6 | 9 |
D | Unit Price Round Shape | |
①O1 Tool Steel Hardened JPQSTB | ③304 Stainless Steel SJPQSTB | |
6 | 650 | 820 |
8 | 670 | 860 |
10 | 700 | 890 |
13 | 750 | 960 |
16 | 930 | 1,100 |
D | Unit Price Round Shape | Unit Price Diamond Shape | ||||||
①O1 Tool Steel Hardened JPQSTA | ②O1 Tool Steel (Hardened) GJPQSTA | ③304 Stainless Steel SJPQSTA | ⑤440C Stainless Steel CJPQSTA | ①O1 Tool Steel Hardened JPQSTD | ②O1 Tool Steel (Hardened) GJPQSTD | ③304 Stainless Steel SJPQSTD | ⑤440C Stainless Steel CJPQSTD | |
5 | 910 | 1,150 | 1,230 | 1,330 | 1,170 | 1,500 | 1,510 | 1,670 |
6 | 930 | 1,170 | 1,240 | 1,360 | 1,180 | 1,520 | 1,530 | 1,700 |
6T | 930 | 1,170 | 1,240 | 1,360 | 1,180 | 1,520 | 1,530 | 1,700 |
8 | 960 | 1,210 | 1,300 | 1,410 | 1,210 | 1,550 | 1,600 | 1,740 |
8T | 960 | 1,210 | 1,300 | 1,410 | 1,210 | 1,550 | 1,600 | 1,740 |
10 | 1,010 | 1,260 | 1,350 | 1,480 | 1,260 | 1,610 | 1,660 | 1,810 |
12 | 1,040 | 1,310 | 1,400 | 1,490 | 1,290 | 1,650 | 1,700 | 1,860 |
13 | 1,080 | 1,350 | 1,460 | 1,580 | 1,350 | 1,730 | 1,800 | 2,100 |
16 | 1,350 | 1,690 | 1,680 | 2,030 | 1,620 | 2,070 | 2,080 | 2,610 |
20 | 1,660 | 2,090 | 2,080 | 2,520 | 1,910 | 2,440 | 2,460 | 3,060 |
D | Unit Price Round Shape | Unit Price Diamond Shape | ||||||
①O1 Tool Steel Hardened FPQSTA | ②O1 Tool Steel (Hardened) GFPQSTA | ③304 Stainless Steel SFPQSTA | ⑤440C Stainless Steel CFPQSTA | ①O1 Tool Steel Hardened FPQSTD | ②O1 Tool Steel (Hardened) GFPQSTD | ③304 Stainless Steel SFPQSTD | ⑤440C Stainless Steel CFPQSTD | |
5 | 1,200 | 1,530 | 1,660 | 1,800 | 1,540 | 1,970 | 2,020 | 2,230 |
6 | 1,220 | 1,560 | 1,690 | 1,830 | 1,570 | 2,010 | 2,060 | 2,270 |
6T | 1,220 | 1,560 | 1,690 | 1,830 | 1,570 | 2,010 | 2,060 | 2,270 |
8 | 1,260 | 1,620 | 1,770 | 1,910 | 1,620 | 2,080 | 2,160 | 2,330 |
8T | 1,260 | 1,620 | 1,770 | 1,910 | 1,620 | 2,080 | 2,160 | 2,330 |
10 | 1,310 | 1,680 | 1,830 | 2,000 | 1,680 | 2,150 | 2,230 | 2,420 |
10T | 1,280 | 1,640 | 1,790 | 1,960 | 1,640 | 2,100 | 2,180 | 2,370 |
12 | 1,360 | 1,740 | 1,910 | 2,000 | 1,730 | 2,220 | 2,300 | 2,470 |
12T | 1,330 | 1,700 | 1,870 | 1,960 | 1,690 | 2,170 | 2,250 | 2,420 |
13 | 1,410 | 1,810 | 1,980 | 2,140 | 1,810 | 2,320 | 2,420 | 2,770 |
13T | 1,380 | 1,770 | 1,940 | 2,090 | 1,770 | 2,270 | 2,370 | 2,710 |
16 | 1,790 | 2,290 | 2,190 | 2,780 | 2,190 | 2,810 | 2,700 | 3,510 |
16T | 1,750 | 2,240 | 2,140 | 2,720 | 2,140 | 2,750 | 2,640 | 3,430 |
20 | 2,190 | 2,810 | 2,730 | 3,450 | 2,580 | 3,310 | 3,230 | 4,170 |
20T | 2,140 | 2,750 | 2,670 | 3,380 | 2,520 | 3,240 | 3,160 | 4,080 |
Quantity | 1~19 | 20~34 | 35~49 | 50~99 |
Discount Rate | Unit Price | 5% | 10% | 18% |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
JPQSTB8-7 |
Loading...
Product Name | Feature | Catalog |
---|---|---|
Small Diameter Locating Pins | Locating Pins with Ø4 or less diameter suitable for small works. | Click here |
Locating Pins for Height Adjusting | Locating Pins with short head for thin PC boards. | Click here |
Nonmagnetic Locating Pins | Nonmagnetic Aluminum locating pins suitable for environments where magnetism must be avoided. | Click here |
Plastic Locating Pins | Plastic Locating Pins prevent work damages. | Click here |
Height Adjusting Pins | Locating Pins suitable for locating in vertical direction. | Click here |
Support Pins | Pins for use in higher position to avoid interferences. | Click here |
Basic Shape | Small Head | Head Tip Shape | Spherical Surface | Drive | No |
---|---|---|---|---|---|
Shank Style | Female Thread | Tolerance of Positioning Side Outer Diameter | 0/-0.01 | Shank Dia. Tolerance | g6 |
Please check the type/dimensions/specifications of the part JPQSTB8-7 in the Small Head Locating Pins - Round or diamond shaped head, spherical tip and internally threaded shank. series.
Part Number |
---|
JPQSTB13-8 |
JPQSTB16-10 |
JPQSTB6-4 |
SJPQSTB10-7 |
SJPQSTB10-8 |
SJPQSTB13-10 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy