(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Hexagonal Posts - With internal thread at both ends, configurable length. (Part Numbers)
- Lead Time Reduction
New: Black anodized aluminum added and available length extended. [July 2023]
Metric Female-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear or Black Anodize or No Surface Treatment.
[Diameter range] 5mm - 32mm
[Length range] 8mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.
- METRIC
- inCAD Components
Unit examples related to this product
Part Number
Configured Part Number is shown.
・Materials
| Type | [ M ]Material | [ S ]Surface Treatment | ||
| L Dimension Selectable | L Dimension Configurable | L Dimension, Thread Dia. Configurable | ||
| - | NLSFB | NLSBF | 1018 Carbon Steel or Equivalent | - |
| LSBRK | LSFB | LSBF | Black Oxide | |
| PLSBRK | PLSFB | PLSBF | Electroless Nickel Plating | |
| - | BLSFB | BLSBF | Trivalent Chromate (Black) | |
| SLSBRK | SLSBFA | SLSBF | 304 Stainless Steel | - |
| - | ALSFB | ALSBF | 2011-T8 Aluminum Alloy | Clear Anodize |
Specifications
| Part Number | - | L | - | M | - | N |
| (L Dimension Selectable) LSBRK13 (L Dimension Configurable) LSFB6 (L Dimension, Thread Dia. Configurable) LSBF10 | - - - | 100 48 200 | - | M4 | - | N6 |
■L Dimension Selectable
■L Dimension Configurable
■L Dimension, Thread Dia. Configurable
[ ! ]When L≤Mx4, tapped hole goes through.
[ ! ]When L≤Mx6, the pilot hole may go through.
[ NG ]*B=5 is not available for 2011-T8 Aluminum Alloy.
[ ! ]L≥Mx2+Nx2
[ NG ]*B=5 is not available for 2011-T8 Aluminum Alloy.
L dim. tolerance is normally.
L 8~300 ±0.2
L300.5~600 ±0.3
L600.5~800 ±0.4
However when L≤200,
all simultaneously produced pieces in a lot
will have L dim. tolerance of
±0.02 or better.
[ ! ]Except L Dimension Selectable
| Part Number | L | M (Coarse) | (C) | |||||||||||||||||||
| Type | B | |||||||||||||||||||||
| 1018 Carbon Steel or Equivalent LSBRK PLSBRK 304 Stainless Steel SLSBRK | 6 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 3 | 6.9 | |||||||||||
| 7 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 4 | 8.1 | |||
| 8 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 5 | 9.2 | ||
| 10 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 6 | 11.5 | |||
| 12 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 6 | 13.9 | |||
| 13 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 8 | 15.0 | |||||
| 14 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 8 | 16.2 | |||||
| 17 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 10 | 19.6 | ||||||
| 19 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 200 | 12 | 21.9 | ||||||||
■L Dimension, Thread Dia. Configurable
| Part Number | L 0.5mm Increment | M (Coarse) | (C) | |
| Type | B | |||
| 1018 Carbon Steel or Equivalent NLSFB LSFB PLSFB BLSFB 304 Stainless Steel SLSBFA 2011-T8 Aluminum Alloy ALSFB | *5 | 8~100 | 2.6 | 5.8 |
| 6 | 8~100 | 3 | 6.9 | |
| 7 | 10~200 | 4 | 8.1 | |
| 8 | 15~250 | 5 | 9.2 | |
| 10 | 25~350 | 6 | 11.5 | |
| 12 | 25~500 | 6 | 13.9 | |
| 13 | 30~500 | 8 | 15.0 | |
| 14 | 25~600 | 8 | 16.2 | |
| 17 | 40~600 | 10 | 19.6 | |
| 19 | 50~600 | 12 | 21.9 | |
| 24 | 50~700 | 16 | 27.7 | |
| 27 | 60~800 | 20 | 31.2 | |
| 30 | 60~1000 | 20 | 34.6 | |
| 32 | 75~1000 | 24 | 36.9 | |
| Part Number | L 0.5mm Increment | M (Coarse) / N (Coarse) | (C) | ||||||||||||
| Type | B | ||||||||||||||
| 1018 Carbon Steel or Equivalent NLSBF LSBF PLSBF BLSBF 304 Stainless Steel SLSBF 2011-T8 Aluminum Alloy ALSBF | *5 | 8~100 | 2 | 2.6 | 5.8 | ||||||||||
| 6 | 15~100 | 3 | 4 | 6.9 | |||||||||||
| 7 | 15~200 | 3 | 4 | 5 | 8.1 | ||||||||||
| 8 | 20~250 | 3 | 4 | 5 | 6 | 9.2 | |||||||||
| 10 | 25~350 | 4 | 5 | 6 | 8 | 11.5 | |||||||||
| 12 | 25~500 | 4 | 5 | 6 | 8 | 13.9 | |||||||||
| 13 | 30~500 | 4 | 5 | 6 | 8 | 10 | 15.0 | ||||||||
| 14 | 30~500 | 4 | 5 | 6 | 8 | 10 | 16.2 | ||||||||
| 17 | 40~600 | 5 | 6 | 8 | 10 | 12 | 19.6 | ||||||||
| 19 | 50~600 | 5 | 6 | 8 | 10 | 12 | 16 | 21.9 | |||||||
| 24 | 60~700 | 6 | 8 | 10 | 12 | 16 | 20 | 27.7 | |||||||
| 27 | 60~800 | 6 | 8 | 10 | 12 | 16 | 20 | 31.2 | |||||||
| 30 | 75~1000 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 34.6 | ||||||
| 32 | 75~1000 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 36.9 | ||||||
[ ! ]When L≤Mx6, the pilot hole may go through.
[ NG ]*B=5 is not available for 2011-T8 Aluminum Alloy.
[ ! ]L≥Mx2+Nx2
[ NG ]*B=5 is not available for 2011-T8 Aluminum Alloy.
L dim. tolerance is normally.
L 8~300 ±0.2
L300.5~600 ±0.3
L600.5~800 ±0.4
However when L≤200,
all simultaneously produced pieces in a lot
will have L dim. tolerance of
±0.02 or better.
[ ! ]Except L Dimension Selectable
Alterations
.GIF)
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| LSBRK14-[35-50/5] |
| LSBRK14-[60-150/10] |
| LSBRK17-200 |
| LSBRK17-[40-50/5] |
| LSBRK17-[60-150/10] |
| LSBRK19-200 |
| LSBRK19-[50-150/10] |
| LSFB5-[8-50/0.5] |
| LSFB6-[8-50/0.5] |
| LSFB7-[10-150/0.5] |
| LSFB8-[15-250/0.5] |
| LSFB10-[25-350/0.5] |
| LSFB12-[25-400/0.5] |
| LSFB13-[30-400/0.5] |
| LSFB14-[25-600/0.5] |
| LSFB17-[40-500/0.5] |
| LSFB19-[50-500/0.5] |
| LSFB24-[50-600/0.5] |
| LSFB27-[60-700/0.5] |
| LSFB30-[60-800/0.5] |
| LSFB32-[75-800/0.5] |
| NLSBF5-[8-50/0.5]-M[2,2.6]-N[2,2.6] |
| NLSBF6-[15-50/0.5]-M[3,4]-N[3,4] |
| NLSBF7-[15-150/0.5]-M[3,4,5]-N[3,4,5] |
| NLSBF8-[20-250/0.5]-M[3,4,5,6]-N[3,4,5,6] |
| NLSBF10-[25-350/0.5]-M[3,4,5,6,8]-N[3,4,5,6,8] |
| NLSBF10-[25-350/0.5]-M[3,4,5,6,8]-ND[3,4,5,6,8] |
| NLSBF10-[25-350/0.5]-MD[3,4,5,6,8]-N[3,4,5,6,8] |
| NLSBF10-[25-350/0.5]-MD[3,4,5,6,8]-ND[3,4,5,6,8] |
| NLSBF12-[25-400/0.5]-M[4,5,6,8]-N[4,5,6,8] |
| NLSBF13-[30-400/0.5]-M[4,5,6,8,10]-N[4,5,6,8,10] |
| NLSBF14-[30-500/0.5]-M[4,5,6,8,10]-N[4,5,6,8,10] |
| NLSBF17-[40-500/0.5]-M[5,6,8,10,12]-N[5,6,8,10,12] |
| NLSBF19-[50-500/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16] |
| NLSBF24-[60-600/0.5]-M[6,8,10,12,16,20]-N[6,8,10,12,16,20] |
| NLSBF27-[60-700/0.5]-M[6,8,10,12,16,20]-N[6,8,10,12,16,20] |
| NLSBF30-[75-800/0.5]-M[6,8,10,12,16,20,24]-N[6,8,10,12,16,20,24] |
| NLSBF32-[75-800/0.5]-M[6,8,10,12,16,20,24]-N[6,8,10,12,16,20,24] |
| NLSFB5-[8-50/0.5] |
| NLSFB6-[8-50/0.5] |
| NLSFB7-[10-150/0.5] |
| NLSFB8-[15-250/0.5] |
| NLSFB10-[25-350/0.5] |
| NLSFB12-[25-400/0.5] |
| NLSFB13-[30-500/0.5] |
| NLSFB14-[25-600/0.5] |
| NLSFB17-[40-500/0.5] |
| NLSFB19-[50-500/0.5] |
| NLSFB24-[50-600/0.5] |
| NLSFB27-[60-700/0.5] |
| NLSFB30-[60-800/0.5] |
| NLSFB32-[75-800/0.5] |
| PLSBF5-[8-50/0.5]-M[2,2.6]-N[2,2.6] |
| PLSBF6-[15-50/0.5]-M[3,4]-N[3,4] |
| PLSBF7-[15-150/0.5]-M[3,4,5]-N[3,4,5] |
| PLSBF8-[20-250/0.5]-M[3,4,5,6]-N[3,4,5,6] |
| PLSBF10-[25-350/0.5]-M[4,5,6,8]-N[4,5,6,8] |
| PLSBF12-[25-400/0.5]-M[4,5,6,8]-N[4,5,6,8] |
| PLSBF13-[30-400/0.5]-M[4,5,6,8,10]-N[4,5,6,8,10] |
| PLSBF14-[30-500/0.5]-M[4,5,6,8,10]-N[4,5,6,8,10] |
| PLSBF17-[40-600/0.5]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12] |
| PLSBF17-[40-600/0.5]-M[4,5,6,8,10,12]-ND[4,5,6,8,10,12] |
| PLSBF17-[40-600/0.5]-MD[4,5,6,8,10,12]-N[4,5,6,8,10,12] |
| PLSBF17-[40-600/0.5]-MD[4,5,6,8,10,12]-ND[4,5,6,8,10,12] |
| PLSBF19-[50-500/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16] |
| PLSBF24-[60-600/0.5]-M[6,8,10,12,16,20]-N[6,8,10,12,16,20] |
| PLSBF27-[60-700/0.5]-M[6,8,10,12,16,20]-N[6,8,10,12,16,20] |
| PLSBF30-[75-800/0.5]-M[6,8,10,12,16,20,24]-N[6,8,10,12,16,20,24] |
| PLSBF32-[75-800/0.5]-M[6,8,10,12,16,20,24]-N[6,8,10,12,16,20,24] |
| PLSBRK6-[15-50/5] |
| PLSBRK7-[20-50/5] |
| PLSBRK7-[60-150/10] |
| PLSBRK8-200 |
| PLSBRK8-[20-50/5] |
| PLSBRK8-[60-150/10] |
| PLSBRK10-200 |
| PLSBRK10-[25-50/5] |
| PLSBRK10-[60-150/10] |
| PLSBRK12-200 |
| PLSBRK12-[25-50/5] |
| PLSBRK12-[60-150/10] |
| PLSBRK13-200 |
| PLSBRK13-[35-50/5] |
| PLSBRK13-[60-150/10] |
| PLSBRK14-200 |
| PLSBRK14-[35-50/5] |
| PLSBRK14-[60-150/10] |
| PLSBRK17-200 |
| PLSBRK17-[40-50/5] |
| PLSBRK17-[60-150/10] |
Loading...
Example
Basic Information
| Type | Hex | End Shape (Left) | Taps | End Shape (Right) | Taps |
|---|---|---|---|---|---|
| Style | Solid | Engraved Scale | Without Scale | Pilot (Concave-Convex at End) | Not Provided |
Specification/Dimensions
-
Post Size(mm)
-
Length L(mm)
-
Material
- Steel
- Stainless Steel
- Aluminum
- Steel
-
Surface Treatment
- Not Provided
- Black Oxide Coating
- Electroless Nickel Plating
- Clear Anodize
- Trivalent Chromate (Black)
-
Thread Dia. M(mm)
-
Thread Dia. N(mm)
-
Thread Dia. N(mm)
-
Thread Dia. M (Depth=Mx3) [Code MD](mm)
-
Thread Dia. N (Depth=Nx3)[Code ND](mm)
-
type
- ALSBF
- ALSFB
- BLSBF
- BLSFB
- LSBF
- LSBRK
- LSFB
- NLSBF
- NLSFB
- PLSBF
- PLSBRK
- PLSFB
- SLSBF
- SLSBFA
- SLSBRK
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 9 Days or Less
- 10 Days or Less
- 12 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Circular Posts - Both ends threaded, with flat surfaces for wrench, configurable length.
- Hexagonal Spacers - PEEK material, both ends with internal threading.
- Hexagonal Posts - Both ends threaded, configurable length, (Inches).
- Hexagonal Posts - One threaded end, configurable length.
- Circular Posts - Stepped, internal threading on both ends.
- Circular Posts - With pilot, both ends threaded.
- Square Posts - Both ends threaded, configurable length.
- Circular Posts - With millimeter scale, hollow, configurable length.
Complementary Products
-
Precision Linear Shafts - One end tapped with wrench flat / precision type.
MISUMI Days to Ship : 6 Days or more
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy