While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Nachi-Fujikoshi Drill

Search by specifying the lower class category

74 items

: 30; 45; 60

Days to Ship	All Same day 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less 13 Days or Less

Carbide Solid Drill Bits - Aqua Drill EX Bit, for Counter Boring, AQDEXZ

Nachi-Fujikoshi

180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.

Volume Discount
Days to Ship: Same day or more

Show Stock Products
HSS Taper Shank Drill Bits - G Shank Drills, GTD, Standard

Nachi-Fujikoshi

Taper shank type coating drill for general purpose.
[Features]
· The surface is coated with a hard TiN film to achieve a long service life.
[Applications]
· Supports materials from steel to stainless steel and aluminum.

Volume Discount
Days to Ship: 8 Days or more
Carbide Solid Drill Bits - Aqua Drill EX Bit, with Oil Hole, 10D, AQDEXOH10D

Nachi-Fujikoshi

[Features]
· Drill capable of wet machining and MQL machining.
· For highly-efficient hole drilling up to 10 times the drill diameter.

Volume Discount
Days to Ship: 8 Days or more
Carbide Solid Drill Bits - Aqua Micro Drill, AQMD

Nachi-Fujikoshi

A drill that is difficult to break and stable for machining.
[Features]
· Employs cemented carbide ideal for small diameter hole drilling.
· A drill with high rigidity is used.
· The cutting load has been reduced by circumferential clearance and thinning.
[Applications]
· Hard to break and capable of stable processing thanks to the high-rigidity shape and the use of carbide alloy ideal for small diameter drilling work.

Volume Discount
Days to Ship: 7 Days or more

Show Stock Products
HSS Solid Drill Bits - Straight Shank, Cobalt Drill Bit, COSD

Nachi-Fujikoshi

A general-purpose cobalt drill that can handle anything from steel to stainless steel.
[Features]
· Consistent drill bite due to the X-type thinning.
· Sharpness is increased by reinforcing the drill torsion angle.
· White surface less than 2.0 mm in diameter (not colored).
[Applications]
· Can be used for a wide range of materials, from steel to stainless steel.

Volume Discount
Days to Ship: Same day

Show Stock Products
HSS Solid Drill Bits - Straight Shank, TiN Coated, G Long Drill Bit, GLSD

Nachi-Fujikoshi

Coated drill for deep holes.
[Features]
· It discharges chips well, making it ideal for drilling deep holes and deep positions.
· Chip-flow is improved while maintaining rigidity thanks to its non-stepped slot shape.
· TiN coating adopted to achieve a longer life even for deep holes.
[Applications]
· It discharges cutting chips well even for deep holes, enabling high-efficiency machining.

Volume Discount
Days to Ship: Same day or more

Show Stock Products
HSS Taper Shank Drill Bits - For Various Work Materials, LTD, Long

Nachi-Fujikoshi

A general purpose long drill bit used over the widest range of applications.
[Features]
· The optimal drill bit for machining can be selected, supporting a diverse range of drill depths and an abundant range of sizes (groove length, overall length).
[Applications]
· Enables selection of a drill bit suitable for the drilling depth for machining.

Volume Discount
Days to Ship: 8 Days or more
Drill Bit Sets - 50 Piece Ironworking Set, SET50

Nachi-Fujikoshi

A general-purpose drill used in the widest ranges of applications.

Volume Discount
Days to Ship: 8 Days or more
Carbide Solid Drill Bits - Aqua Drill EX Bit, with Flat Radius, AQDEXZ-R

Nachi-Fujikoshi

[Features]
· Drill with excellent drilling performance for counterboring.
· Ideal for inclined surfaces and tap pilot hole drilling.
· Recommended for hole depth 2D (twice the diameter) or less.

Volume Discount
Days to Ship: 9 Days or more
HSS Solid Drill Bits - Straight Shank, AG Starting Drill Bit, AGSTD

Nachi-Fujikoshi

HSS drill which is capable of speedy centering, chamfering and V-grooving and boasts a long service life.
[Features]
· Highly accurate positioning is possible with good bite.
· The sharp blade produces a beautifully finished surface.
[Applications]
· Can be used for various processing, from chamfering to V groove machining.

Volume Discount
Days to Ship: Same day or more

Show Stock Products
HSS Solid Drill Bits - Straight Shank, TiN Coated, G Short Drill Bit, GSS

Nachi-Fujikoshi

Short type straight shank drill with a TiN coated surface.
[Features]
· The original thinning shape (3-rake) improves centripedality and chip separation.
· TiN coating achieves longer life.
[Applications]
· Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum. High positional accuracy can be obtained.

Volume Discount
Days to Ship: Same day or more

Show Stock Products
Carbide Solid Drill Bits - Aqua Drill EX Bit, AQDEXR, Regular

Nachi-Fujikoshi

Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating.
· Longer life by improving lubricity and heat/abrasion resistance.
· The unique thinning shape increases biting and reduces cutting resistance.
[Applications]
· Ideal for thin work materials and small low-rigidity processing machines.

Volume Discount
Days to Ship: Same day or more

Show Stock Products
Carbide Solid Drill Bits - Aqua Drill Bit, for High Hardness Steel, AQDH

Nachi-Fujikoshi

Carbide drill capable of high efficiency machining of high-hardness steel of 50 to 70 HRC.
[Features]
· It uses carbide alloy ideal for high-hardness steel machining and AquaCoat, which has excellent heat resistance and abrasion resistance.
· Wear resistance and chipping resistance are greatly improved.
· Uses a thick core and weak torsion.
· The high rigidity makes it resistant against vibration as well, preventing damage from microchipping, etc.
[Applications]
· High performance machining of 50 to 70 HRC high hardness steel is possible.

Volume Discount
Days to Ship: Same day or more

Show Stock Products
HSS Solid Drill Bits - Straight Shank, LSD, Long

Nachi-Fujikoshi

A general purpose long drill bit used over the widest range of applications.
[Features]
· The optimal drill bit for machining can be selected, supporting a diverse range of drill depths and an abundant range of sizes (groove length, overall length).

Volume Discount
Days to Ship: Same day or more

Show Stock Products
HSS Solid Drill Bits - Straight/End Mill Shank, TiCN Coated, SG-ESS Drill Bit, SGESS

Nachi-Fujikoshi

High-grade powdered high-speed steel and SG coating allows this HSS drill to have the longest life possible.
[Features]
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum, enabling high precision drilling.

Volume Discount
Days to Ship: Same day or more

Show Stock Products
Carbide Solid Drill Bits - Aqua Drill EX Bit, Starting Type, AQDEXST

Nachi-Fujikoshi

[Features]
· Highly accurate positioning is possible with good bite.
· A multi-function type capable of centering, chamfering and V-grooving.

Volume Discount
Days to Ship: 8 Days or more
HSS Solid Drill Bits - AG Power Drill Bit, AGPSLSD, Semi-Long

Nachi-Fujikoshi

[Features]
· Adopts AG coating with excellent wear resistance to realize a longer life.
· Chip-flow is improved while maintaining rigidity thanks to its non-stepped slot shape.

Volume Discount
Days to Ship: 8 Days or more
HSS Solid Drill Bits - Straight Shank, AG-ESS Drill Bit, AGESS

Nachi-Fujikoshi

Coated high-speed drill that realizes high speeds and high feed rates approaching that of carbide drills.
[Features]
· New AG coating with excellent heat resistance and abrasion resistance is the best match for next generation high alloy high-speed steel.
· 50C type capable of high-speed machining at a cutting speed of 60 m/min.
· The next generation of high alloy steel HSS achieves both anti-chipping performance and friction resistance performance.
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
[Applications]
· Convenient for lathes where stable machining of carbide is difficult and low-rigidity processing machines.

Volume Discount
Days to Ship: Same day or more

Show Stock Products
HSS Taper Shank Drill Bits - G Shank Drills, GTS, Short

Nachi-Fujikoshi

Taper type straight shank drill with a TiN coated surface.
[Features]
· The original thinning shape (3-rake) improves centripedality and chip separation.
· TiN coating achieves longer life.
[Applications]
· Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum. High positional accuracy can be obtained.

Volume Discount
Days to Ship: 8 Days or more
UG Stainless Steel Drill UGSUS

Nachi-Fujikoshi

This drill is ideal for stainless steel processing. UG coating with excellent heat resistance provides a long service life.

Volume Discount
Days to Ship: Same day

Show Stock Products
Carbide Solid Drill Bits - Aqua Drill Bit, 3-Flute, AQD3F

Nachi-Fujikoshi

3-flute carbide drill capable of high-precision drilling and reamer-less processing.
[Features]
· High-precision drilling is possible due to the 3-flute cutting edge excellent in cutting balance. It also supports reamer-less processing.
· Aqua Drill 3-Flute has a proprietary thinning shape and good sharpness for minimal cutting resistance.
· Highly lubricating aqua coating and groove shape for excellent chipping discharge without clogging, enabling consistent hole drilling.
[Applications]
· High-precision drilling is made possible by the 3-flute cutting edge with excellent cutting balance and negative corner with high centrality.

Volume Discount
Days to Ship: 8 Days or more
Carbide Solid Drill Bits - Aqua Drill EX Bit, with Oil Hole, 5D, AQDEXOH5D

Nachi-Fujikoshi

Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Product lineup is for 3D, 5D and 8D boring depths.
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
· Capable of stable wet processing and MQL processing.
· For highly-efficient hole drilling up to 5 times the drill diameter.
[Applications]
· Ideal for stable processing of mild steel to high hardness materials, as well as work materials with difficult chip processing.

Volume Discount
Days to Ship: 8 Days or more
Aqua Drill Regular AQDR

Nachi-Fujikoshi

A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
[Features]
· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
[Applications]
· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.

Volume Discount
Days to Ship: 8 Days or more
Carbide Solid Drill Bits - Aqua Drill Bit, 3-Flute, with Bottom Blade, AQDED3F

Nachi-Fujikoshi

Coated carbide drill which achieves high efficiency machining of holes in cast materials and screw pilot holes.
[Features]
· Cast iron and aluminum cast parts have a high performance machined hole with H7 precision.
· 3-flute cutting edge with excellent cutting balance minimizes cutting vibration during machining.
· Finish processing is possible with work efficiency of 10 times or more compared to a reamer.
[Applications]
· 3-flute cutting edge with excellent cutting balance ideal for high-quality machining.

Volume Discount
Days to Ship: 8 Days or more
HSS Solid Drill Bits - Straight Shank, SD

Nachi-Fujikoshi

A general-purpose HSS drill which is used for the widest range of applications.
[Features]
· Corresponds to the JIS standard.
[Applications]
· Usable in a wide range of applications.

Volume Discount
Days to Ship: Same day or more

Show Stock Products
HSS Solid Drill Bits - Straight Shank, AG Starting Drill Bit, AGSTDLS, Long

Nachi-Fujikoshi

Long shank type starting HSS drill for deep locations or avoiding interference.
[Features]
· Capable of speedy centering, chamfering and V-grooving and boasts a long service life.
· Highly accurate positioning is possible with good bite.
· The sharp blade produces a beautifully finished surface.
[Applications]
· Can be used with outstanding positioning accuracy for various processing, from chamfering to V groove machining.

Volume Discount
Days to Ship: Same day or more

Show Stock Products
HSS Solid Drill Bits - Straight Shank, AG-ES Drill Bit, AGES

Nachi-Fujikoshi

Coated high-speed drill that realizes high speeds and high feed rates approaching that of carbide drills.
[Features]
· New AG coating with excellent heat resistance and abrasion resistance is the best match for next generation high alloy high-speed steel.
· 50C type capable of high-speed machining at a cutting speed of 60 m/min.
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
· The next generation of high alloy steel HSS achieves both anti-chipping performance and friction resistance performance.
[Applications]
· Also convenient for lathes where stable machining of carbide is difficult and low-rigidity processing machines.

Volume Discount
Days to Ship: Same day or more

Show Stock Products
HSS Solid Drill Bits - Straight/End Mill Shank, DLC Drill Bit, DLCHD

Nachi-Fujikoshi

High-speed drill for high efficiency machining of aluminum alloys.
[Features]
· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
· Has low adhesion and eliminates troubles such as chip clogging which are likely to occur in aluminum processing.
[Applications]
· The coefficient of friction is small, and since the aluminum is unlikely to weld, high friction efficiency with aluminum alloys is demonstrated.

Volume Discount
Days to Ship: Same day or more

Show Stock Products
HSS Solid Drill Bits - Straight Shank, TiN Coated, G Standard Drill Bit, GSD

Nachi-Fujikoshi

Straight shank type coating drill for general purpose.
[Features]
· The surface is coated with a hard TiN film to achieve a long service life.
[Applications]
· Supports materials from steel to stainless steel and aluminum.

Volume Discount
Days to Ship: Same day

Show Stock Products
HSS Solid Drill Bits - Straight/End Mill Shank, TiCN Coated, SG-ES Drill Bit, SGES

Nachi-Fujikoshi

HSS drill of the highest quality featuring a long service life, with high-grade powder HSS and SG coating.
[Features]
· High-grade powdered high-speed steel and SG coating allows the HSS drill to have the longest life possible.
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
· Allows high-speed, high-efficiency machining up to mold steel and aluminum.
* Cannot be used for austenitic stainless steel.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum, enabling high precision drilling.

Volume Discount
Days to Ship: Same day or more

Show Stock Products
HSS Solid Drill Bits - End Mill Shank, SG-FAX Oil-Hole Drill Bit, SGOH

Nachi-Fujikoshi

Oil hole HSS drill of the highest quality featuring a long service life, with high-grade powder HSS and SG coating.
[Features]
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.

Volume Discount
Days to Ship: Same day or more

Show Stock Products
Carbide Solid Drill Bits - Aqua Drill FC Bit, AQDFC

Nachi-Fujikoshi

A carbide drill with an optimum design for FC materials that provides a longer service life than conventional products.
[Features]
· Combination of cemented carbide ideal for FC material and Aquacoat with excellent heat and wear resistance.
· Longer life than conventional FC drills.
· The special cutting edge treatment suppresses wear of the corners most easily damaged in FC processing.
· A lifetime of 70% of that of new products is guaranteed after re-grinding, even if there is no recoating.
[Applications]
· Ideal for long life machining of FC, FCD, and low carbon steel.

Volume Discount
Days to Ship: 8 Days or more
HSS Taper Shank Drill Bits - Cobalt Drills, COTD

Nachi-Fujikoshi

A general-purpose cobalt drill that can handle anything from steel to stainless steel and aluminum.
[Features]
· Cobalt HSS with excellent wear resistance and heat resistance is used for the main body.

Volume Discount
Days to Ship: 8 Days or more
HSS Solid Drill Bits - Straight Shank, AG-Power Drill Bit, AGPLSD, Long

Nachi-Fujikoshi

A drill that can steplessly drill deep holes up to L/D20.
[Features]
· Adopts AG coating with excellent wear resistance to realize a longer life.
· Chip-flow is improved while maintaining rigidity thanks to its non-stepped slot shape.
[Applications]
· Ideal for deep hole machining for anything from raw materials to mold steel.

Volume Discount
Days to Ship: Same day or more

Show Stock Products
HSS Solid Drill Bits - Straight/End Mill Shank, TiN Coated, G Oil-Hole Drill Bit, GOH

Nachi-Fujikoshi

General purpose coated oil hole drill.
[Features]
· The original thinning shape (3-rake) improves centripedality and chip separation.
· TiN coating and internal lubrication provide a cooling effect that results in a long D lifetime.
[Applications]
· Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum.

Volume Discount
Days to Ship: 8 Days or more
HSS Solid Drill Bits - Straight Shank, TiCN Coated, UG Power Drill Bit, UGPD

Nachi-Fujikoshi

Capable of high-efficiency deep drilling of steel and cast iron. Non-step processing up to 7 times the drill diameter is possible.

Days to Ship: 7 Days or more
Carbide Solid Drill Bits - Aqua Drill EX Bit, AQDEXS, Stub

Nachi-Fujikoshi

Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating to improve the lubricity, heat resistance and abrasion resistance, thereby prolonging the service life.
[Applications]
· The unique thinning shape increases biting and reduces cutting resistance.
· Stable cutting performance even with thin work materials and small low-rigidity processing machines.

Volume Discount
Days to Ship: 8 Days or more
HSS Taper Shank Drill Bits - 118 Degree Point Angle, TD

Nachi-Fujikoshi

A general-purpose drill used in the widest ranges of applications.
[Features]
· A standard drill that corresponds to the JIS standard.

Volume Discount
Days to Ship: Same day or more

Show Stock Products
HSS Solid Drill Bits - Straight/End Mill Shank, TiAlN Coated, AG-SUS Drill Bit, Short

Nachi-Fujikoshi

Drill capable of stable hole drilling with AG coating excellent in heat resistance.
[Features]
· Newly developed optimal drill shape adopted for machining high alloy HSS, AG coatings, and stainless steel.
· It has a cutting edge shape that's excellent in the segmentation of chips and a groove shape that achieves both high chip discharge performance and drill rigidity.
· Stable machining accuracy is achieved by using a high-precision end mill shank.
[Applications]
· Optimal for stainless steel.

Volume Discount
Days to Ship: Same day or more

Show Stock Products
HSS Solid Drill Bits - Straight/End Mill Shank, AG-SUS Drill Bit, Regular

Nachi-Fujikoshi

Drill capable of stable hole drilling with AG coating excellent in heat resistance.
[Features]
· Newly developed optimal drill shape adopted for machining high alloy HSS, AG coatings, and stainless steel.
· It has a cutting edge shape that's excellent in the segmentation of chips and a groove shape that achieves both high chip discharge performance and drill rigidity.
· Stable machining accuracy is achieved by using a high-precision end mill shank.
[Applications]
· Optimal for stainless steel.

Volume Discount
Days to Ship: Same day or more

Show Stock Products
Carbide Solid Drill Bits - DLC Drill Bit, for Aluminum Machining, DLCDR, Regular

Nachi-Fujikoshi

A drill for high-speed wet machining and dry machining of aluminum alloys.
[Features]
· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
· Dry machining of aluminum alloy is possible.
· Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.
· Allows also non-step boring of hole depth 5D.
[Applications]
· Capable of dry machining of aluminum alloy, and non-step machining of hole depths up to 3D.

Volume Discount
Days to Ship: 8 Days or more
Carbide Solid Drill Bits - DLC Micro Drill Bit, for Aluminum Machining, DLCMD

Nachi-Fujikoshi

An aluminum drill for small diameter hole drilling, which performs high speed wet and dry machining of aluminum alloys.
[Features]
· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
· Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.
· Allows non-step boring of hole depth 5D.
[Applications]
· Capable of dry machining of aluminum alloy, and non-step machining of hole depths up to 3D.

Volume Discount
Days to Ship: Same day or more

Show Stock Products
Carbide Solid Drill Bits - Aqua Drill EX Bit, with Oil Hole, 3D, AQDEXOH3D

Nachi-Fujikoshi

Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
[Applications]
· Stable processing of mild steel to high hardness materials.

Volume Discount
Days to Ship: 8 Days or more
Carbide Solid Drill Bits - Aqua Drill EX Bit, with Oil Hole, 8D, AQDEXOH8D

Nachi-Fujikoshi

Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Product lineup is for 3D, 5D and 8D boring depths.
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
[Applications]
· Stable processing of mild steel to high hardness materials.

Volume Discount
Days to Ship: 8 Days or more
Aqua Drill Stub AQDS

Nachi-Fujikoshi

A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
[Features]
· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
[Applications]
· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.
· Drill for dry machining.

Volume Discount
Days to Ship: Same day or more

Show Stock Products

Days to Ship:	Same day or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	7 Days or more

Days to Ship:	Same day

Days to Ship:	Same day or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	9 Days or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	Same day or more

Days to Ship:	8 Days or more

Days to Ship:	Same day

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	Same day

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	Same day or more

Days to Ship:	8 Days or more

Days to Ship:	7 Days or more

Days to Ship:	8 Days or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	8 Days or more

Days to Ship:	Same day or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	Same day or more


Brand
Product Series
Days to Ship
Hole Diameter (Drilling Diameter) D(mm)
Groove Length (ℓ)(mm)
Work Material
Tool Material Type
Overall Length (L)(mm)
Link Model
Coating Presence
Coating Type
Oil-Hole Presence


Brand	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi	Nachi-Fujikoshi
Product Series	Carbide Solid Drill Bits - Aqua Drill EX Bit, for Counter Boring, AQDEXZ	HSS Taper Shank Drill Bits - G Shank Drills, GTD, Standard	Carbide Solid Drill Bits - Aqua Drill EX Bit, with Oil Hole, 10D, AQDEXOH10D	Carbide Solid Drill Bits - Aqua Micro Drill, AQMD	HSS Solid Drill Bits - Straight Shank, Cobalt Drill Bit, COSD	HSS Solid Drill Bits - Straight Shank, TiN Coated, G Long Drill Bit, GLSD	HSS Taper Shank Drill Bits - For Various Work Materials, LTD, Long	Drill Bit Sets - 50 Piece Ironworking Set, SET50	Carbide Solid Drill Bits - Aqua Drill EX Bit, with Flat Radius, AQDEXZ-R	HSS Solid Drill Bits - Straight Shank, AG Starting Drill Bit, AGSTD	HSS Solid Drill Bits - Straight Shank, TiN Coated, G Short Drill Bit, GSS	Carbide Solid Drill Bits - Aqua Drill EX Bit, AQDEXR, Regular	Carbide Solid Drill Bits - Aqua Drill Bit, for High Hardness Steel, AQDH	HSS Solid Drill Bits - Straight Shank, LSD, Long	HSS Solid Drill Bits - Straight/End Mill Shank, TiCN Coated, SG-ESS Drill Bit, SGESS	Carbide Solid Drill Bits - Aqua Drill EX Bit, Starting Type, AQDEXST	HSS Solid Drill Bits - AG Power Drill Bit, AGPSLSD, Semi-Long	HSS Solid Drill Bits - Straight Shank, AG-ESS Drill Bit, AGESS	HSS Taper Shank Drill Bits - G Shank Drills, GTS, Short	UG Stainless Steel Drill UGSUS	Carbide Solid Drill Bits - Aqua Drill Bit, 3-Flute, AQD3F	Carbide Solid Drill Bits - Aqua Drill EX Bit, with Oil Hole, 5D, AQDEXOH5D	Aqua Drill Regular AQDR	Carbide Solid Drill Bits - Aqua Drill Bit, 3-Flute, with Bottom Blade, AQDED3F	HSS Solid Drill Bits - Straight Shank, SD	HSS Solid Drill Bits - Straight Shank, AG Starting Drill Bit, AGSTDLS, Long	HSS Solid Drill Bits - Straight Shank, AG-ES Drill Bit, AGES	HSS Solid Drill Bits - Straight/End Mill Shank, DLC Drill Bit, DLCHD	HSS Solid Drill Bits - Straight Shank, TiN Coated, G Standard Drill Bit, GSD	HSS Solid Drill Bits - Straight/End Mill Shank, TiCN Coated, SG-ES Drill Bit, SGES	HSS Solid Drill Bits - End Mill Shank, SG-FAX Oil-Hole Drill Bit, SGOH	Carbide Solid Drill Bits - Aqua Drill FC Bit, AQDFC	HSS Taper Shank Drill Bits - Cobalt Drills, COTD	HSS Solid Drill Bits - Straight Shank, AG-Power Drill Bit, AGPLSD, Long	HSS Solid Drill Bits - Straight/End Mill Shank, TiN Coated, G Oil-Hole Drill Bit, GOH	HSS Solid Drill Bits - Straight Shank, TiCN Coated, UG Power Drill Bit, UGPD	Carbide Solid Drill Bits - Aqua Drill EX Bit, AQDEXS, Stub	HSS Taper Shank Drill Bits - 118 Degree Point Angle, TD	HSS Solid Drill Bits - Straight/End Mill Shank, TiAlN Coated, AG-SUS Drill Bit, Short	HSS Solid Drill Bits - Straight/End Mill Shank, AG-SUS Drill Bit, Regular	Carbide Solid Drill Bits - DLC Drill Bit, for Aluminum Machining, DLCDR, Regular	Carbide Solid Drill Bits - DLC Micro Drill Bit, for Aluminum Machining, DLCMD	Carbide Solid Drill Bits - Aqua Drill EX Bit, with Oil Hole, 3D, AQDEXOH3D	Carbide Solid Drill Bits - Aqua Drill EX Bit, with Oil Hole, 8D, AQDEXOH8D	Aqua Drill Stub AQDS
Days to Ship	Same day or more Show Stock Products	8 Days or more	8 Days or more	7 Days or more Show Stock Products	Same day Show Stock Products	Same day or more Show Stock Products	8 Days or more	8 Days or more	9 Days or more	Same day or more Show Stock Products	Same day or more Show Stock Products	Same day or more Show Stock Products	Same day or more Show Stock Products	Same day or more Show Stock Products	Same day or more Show Stock Products	8 Days or more	8 Days or more	Same day or more Show Stock Products	8 Days or more	Same day Show Stock Products	8 Days or more	8 Days or more	8 Days or more	8 Days or more	Same day or more Show Stock Products	Same day or more Show Stock Products	Same day or more Show Stock Products	Same day or more Show Stock Products	Same day Show Stock Products	Same day or more Show Stock Products	Same day or more Show Stock Products	8 Days or more	8 Days or more	Same day or more Show Stock Products	8 Days or more	7 Days or more	8 Days or more	Same day or more Show Stock Products	Same day or more Show Stock Products	Same day or more Show Stock Products	8 Days or more	Same day or more Show Stock Products	8 Days or more	8 Days or more	Same day or more Show Stock Products
Hole Diameter (Drilling Diameter) D(mm)	0.5 ～ 20	7 ～ 32	1 ～ 12	0.2 ～ 1.99	0.5 ～ 13	1 ～ 13	7 ～ 50	1.1 ～ 6	3 ～ 12	3 ～ 20	1.6 ～ 20	2.1 ～ 16	2 ～ 12	7.1 ～ 13	0.57 ～ 20	3 ～ 20	1 ～ 13	1 ～ 19.5	7 ～ 32	6	3 ～ 16	1 ～ 16	3.3 ～ 10	3 ～ 12	0.2 ～ 11.9	3 ～ 12	2 ～ 20	1 ～ 13	2.5 ～ 13	2 ～ 32	10 ～ 30	2 ～ 12	7 ～ 33	1 ～ 13	8 ～ 40	1.1 ～ 1.9	2 ～ 16	7.7 ～ 32.5	1 ～ 20	1 ～ 20	2 ～ 12	0.5 ～ 1.9	3 ～ 16	3 ～ 16	4 ～ 12.5
Groove Length (ℓ)(mm)	1.65 ～ 90	67 ～ 177	13 ～ 156	2.5 ～ 15	5 ～ 80	40 ～ 135	25 ～ 700	-	14 ～ 54	9 ～ 40	13 ～ 94	17 ～ 96	12 ～ 51	100 ～ 200	3 ～ 94	9 ～ 40	26 ～ 134	6 ～ 94	45 ～ 114	57	16 ～ 80	8 ～ 128	21 ～ 60	16 ～ 51	3 ～ 109	9 ～ 30	24 ～ 140	12 ～ 101	30 ～ 101	24 ～ 185	75 ～ 174	15 ～ 73	75 ～ 200	33 ～ 235	33 ～ 152	14 ～ 22	8 ～ 55	82 ～ 200	6 ～ 94	12 ～ 140	15 ～ 73	6 ～ 15	17 ～ 80	33 ～ 176	22 ～ 51
Work Material	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○]	General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○]	High-Hardness Steel[◎]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Cast Iron[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Stainless Steel[◎] / Titanium[○]	General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○]	General Steel[◎] / Cast Iron[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎] / Copper[◎]	General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[○]	General Steel[◎] / Cast Iron[◎]	General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Heat-Treated Steel[◎] / Cast Iron[◎]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Stainless Steel[◎]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○]
Tool Material Type	Carbide	High-Speed Steel	Carbide	Carbide	Cobalt High-Speed Steel	Cobalt High-Speed Steel	High-Speed Steel	High-Speed Steel	Carbide	Cobalt High-Speed Steel	Cobalt High-Speed Steel	Carbide	Carbide	High-Speed Steel	High-Speed Steel	Carbide	Cobalt High-Speed Steel	High-Speed Steel	Cobalt High-Speed Steel	Cobalt High-Speed Steel	Carbide	Carbide	Carbide	Carbide	High-Speed Steel	Cobalt High-Speed Steel	High-Speed Steel	High-Speed Steel	High-Speed Steel	High-Speed Steel	High-Speed Steel	Carbide	Cobalt High-Speed Steel	Cobalt High-Speed Steel	Cobalt High-Speed Steel	Cobalt High-Speed Steel	Carbide	High-Speed Steel	High-Speed Steel	High-Speed Steel	Carbide	Carbide	Carbide	Carbide	Carbide
Overall Length (L)(mm)	47 ～ 145	148 ～ 298	61 ～ 216	38 ～ 47	27 ～ 152	100 ～ 250	200 ～ 1000	-	50 ～ 90	-	39 ～ 168	49 ～ 160	44 ～ 108	200 ～ 400	38 ～ 168	48 ～ 131	48 ～ 184	40 ～ 168	126 ～ 235	93	48 ～ 144	56 ～ 194	53 ～ 110	48 ～ 108	19 ～ 146	-	56 ～ 210	50 ～ 158	57 ～ 151	56 ～ 255	144 ～ 265	47 ～ 130	155 ～ 345	-	83 ～ 250	36 ～ 46	45 ～ 112	-	40 ～ 168	50 ～ 210	47 ～ 130	44 ～ 47	68 ～ 146	81 ～ 242	54 ～ 110
Link Model	End Mill Link / Straight Link	-	Straight Link	End Mill Link	Straight Link	Straight Link	Tapered Link	-	Straight Link	-	Straight Link	End Mill Link / Straight Link	End Mill Link / Straight Link	Straight Link	End Mill Link / Straight Link	Straight Link	Straight Link	End Mill Link / Straight Link	-	Straight Link	End Mill Link / Straight Link	End Mill Link / Straight Link	End Mill Link / Straight Link	End Mill Link / Straight Link	Straight Link	-	End Mill Link / Straight Link	End Mill Link / Straight Link	Straight Link	End Mill Link / Straight Link	End Mill Link	End Mill Link / Straight Link	Tapered Link	-	End Mill Link / Straight Link	Straight Link	End Mill Link / Straight Link	-	End Mill Link / Straight Link	End Mill Link / Straight Link	End Mill Link / Straight Link	End Mill Link	End Mill Link / Straight Link	End Mill Link / Straight Link	End Mill Link / Straight Link
Coating Presence	Included	Included	Included	Included	None	Included	None	-	Included	-	Included	Included	Included	None	Included	Included	Included	Included	Included	Included	Included	Included	Included	Included	None	-	Included	Included	Included	Included	Included	Included	None	Included	Included	Included	Included	-	Included	Included	Included	Included	Included	Included	Included
Coating Type	Others	TiN	For General Steel (AlCrN etc.)	Others	Non-Coated	TiN	-	-	For General Steel (AlCrN etc.)	-	TiN	Others	Others	Non-Coated	TiCN	For General Steel (AlCrN etc.)	For General Steel (AlCrN etc.)	Others	TiN	TiCN	Others	Others	Others	Others	Non-Coated	-	Others	DLC	TiN	TiCN	TiCN	Others	-	Others	TiN	TiCN	Others	-	TiAlN	Others	DLC	DLC	Others	Others	Others
Oil-Hole Presence	None	-	Included	None	None	None	-	-	None	-	None	None	None	None	None	None	None	None	-	None	None	Included	None	None	None	-	None	None	None	None	Included	None	-	-	Included	None	-	-	None	None	None	None	Included	Included	None

Configure

Stock

- Show Stock Products
Clear

Specification/Dimensions

Metric / Inch
- metric
Clear

Hole Diameter (Drilling Diameter) D(mm)
- 0～0.995
  - 0
  - 0.01
  - 0.015
  - 0.02
  - 0.025
  - 0.03
  - 0.035
  - 0.04
  - 0.045
  - 0.05
  - 0.055
  - 0.06
  - 0.065
  - 0.07
  - 0.075
  - 0.08
  - 0.085
  - 0.09
  - 0.095
  - 0.1
  - 0.105
  - 0.11
  - 0.115
  - 0.12
  - 0.125
  - 0.128
  - 0.13
  - 0.135
  - 0.14
  - 0.143
  - 0.145
  - 0.147
  - 0.15
  - 0.155
  - 0.16
  - 0.165
  - 0.17
  - 0.175
  - 0.18
  - 0.185
  - 0.19
  - 0.195
  - 0.2
  - 0.205
  - 0.21
  - 0.215
  - 0.22
  - 0.225
  - 0.23
  - 0.235
  - 0.24
  - 0.245
  - 0.25
  - 0.255
  - 0.26
  - 0.265
  - 0.27
  - 0.275
  - 0.28
  - 0.285
  - 0.29
  - 0.295
  - 0.3
  - 0.305
  - 0.31
  - 0.315
  - 0.32
  - 0.325
  - 0.33
  - 0.335
  - 0.34
  - 0.345
  - 0.35
  - 0.355
  - 0.36
  - 0.365
  - 0.37
  - 0.375
  - 0.38
  - 0.385
  - 0.39
  - 0.395
  - 0.4
  - 0.405
  - 0.41
  - 0.415
  - 0.42
  - 0.425
  - 0.43
  - 0.432
  - 0.435
  - 0.44
  - 0.445
  - 0.45
  - 0.455
  - 0.46
  - 0.465
  - 0.47
  - 0.475
  - 0.48
  - 0.485
  - 0.49
  - 0.495
  - 0.5
  - 0.505
  - 0.51
  - 0.515
  - 0.52
  - 0.525
  - 0.53
  - 0.535
  - 0.54
  - 0.545
  - 0.55
  - 0.555
  - 0.56
  - 0.565
  - 0.57
  - 0.575
  - 0.58
  - 0.585
  - 0.59
  - 0.595
  - 0.6
  - 0.605
  - 0.61
  - 0.615
  - 0.62
  - 0.625
  - 0.63
  - 0.632
  - 0.635
  - 0.64
  - 0.645
  - 0.65
  - 0.655
  - 0.66
  - 0.665
  - 0.67
  - 0.675
  - 0.68
  - 0.685
  - 0.69
  - 0.695
  - 0.7
  - 0.705
  - 0.71
  - 0.715
  - 0.72
  - 0.725
  - 0.73
  - 0.735
  - 0.74
  - 0.745
  - 0.75
  - 0.755
  - 0.76
  - 0.765
  - 0.77
  - 0.775
  - 0.78
  - 0.785
  - 0.79
  - 0.795
  - 0.8
  - 0.805
  - 0.81
  - 0.815
  - 0.82
  - 0.825
  - 0.83
  - 0.835
  - 0.84
  - 0.845
  - 0.85
  - 0.855
  - 0.86
  - 0.865
  - 0.87
  - 0.875
  - 0.88
  - 0.885
  - 0.89
  - 0.895
  - 0.9
  - 0.905
  - 0.91
  - 0.915
  - 0.92
  - 0.925
  - 0.93
  - 0.935
  - 0.94
  - 0.945
  - 0.95
  - 0.955
  - 0.96
  - 0.965
  - 0.97
  - 0.975
  - 0.98
  - 0.985
  - 0.99
  - 0.995
- 1～1.995
  - 1
  - 1.005
  - 1.01
  - 1.015
  - 1.02
  - 1.025
  - 1.03
  - 1.035
  - 1.04
  - 1.045
  - 1.05
  - 1.055
  - 1.06
  - 1.065
  - 1.07
  - 1.075
  - 1.08
  - 1.085
  - 1.09
  - 1.095
  - 1.1
  - 1.105
  - 1.11
  - 1.115
  - 1.12
  - 1.125
  - 1.13
  - 1.135
  - 1.14
  - 1.145
  - 1.15
  - 1.155
  - 1.16
  - 1.165
  - 1.17
  - 1.175
  - 1.18
  - 1.185
  - 1.19
  - 1.195
  - 1.2
  - 1.205
  - 1.21
  - 1.215
  - 1.22
  - 1.225
  - 1.23
  - 1.235
  - 1.24
  - 1.245
  - 1.25
  - 1.255
  - 1.26
  - 1.265
  - 1.27
  - 1.275
  - 1.28
  - 1.285
  - 1.29
  - 1.295
  - 1.3
  - 1.305
  - 1.31
  - 1.315
  - 1.32
  - 1.325
  - 1.33
  - 1.335
  - 1.34
  - 1.345
  - 1.35
  - 1.355
  - 1.36
  - 1.365
  - 1.37
  - 1.375
  - 1.38
  - 1.385
  - 1.39
  - 1.395
  - 1.4
  - 1.405
  - 1.41
  - 1.415
  - 1.42
  - 1.425
  - 1.43
  - 1.435
  - 1.44
  - 1.445
  - 1.45
  - 1.455
  - 1.46
  - 1.465
  - 1.47
  - 1.475
  - 1.48
  - 1.485
  - 1.49
  - 1.495
  - 1.5
  - 1.505
  - 1.51
  - 1.515
  - 1.52
  - 1.525
  - 1.53
  - 1.535
  - 1.54
  - 1.545
  - 1.55
  - 1.555
  - 1.56
  - 1.565
  - 1.57
  - 1.575
  - 1.58
  - 1.585
  - 1.59
  - 1.595
  - 1.6
  - 1.6×10D
  - 1.605
  - 1.61
  - 1.615
  - 1.62
  - 1.625
  - 1.63
  - 1.635
  - 1.64
  - 1.645
  - 1.65
  - 1.655
  - 1.66
  - 1.665
  - 1.67
  - 1.675
  - 1.68
  - 1.685
  - 1.69
  - 1.695
  - 1.7
  - 1.705
  - 1.71
  - 1.715
  - 1.72
  - 1.725
  - 1.73
  - 1.735
  - 1.74
  - 1.745
  - 1.75
  - 1.755
  - 1.76
  - 1.765
  - 1.77
  - 1.775
  - 1.78
  - 1.785
  - 1.79
  - 1.795
  - 1.8
  - 1.8×10D
  - 1.805
  - 1.81
  - 1.815
  - 1.82
  - 1.825
  - 1.83
  - 1.835
  - 1.84
  - 1.845
  - 1.85
  - 1.855
  - 1.86
  - 1.865
  - 1.87
  - 1.875
  - 1.88
  - 1.885
  - 1.89
  - 1.895
  - 1.9
  - 1.905
  - 1.91
  - 1.915
  - 1.92
  - 1.925
  - 1.93
  - 1.935
  - 1.94
  - 1.945
  - 1.95
  - 1.955
  - 1.96
  - 1.965
  - 1.97
  - 1.975
  - 1.98
  - 1.985
  - 1.99
  - 1.995
- 2～2.99
  - 2
  - 2×10D
  - 2.01
  - 2.015
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.1×10D
  - 2.11
  - 2.115
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.2×10D
  - 2.21
  - 2.215
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.3×10D
  - 2.31
  - 2.315
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.39
  - 2.4
  - 2.4×10D
  - 2.41
  - 2.415
  - 2.42
  - 2.43
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.49
  - 2.5
  - 2.5×10D
  - 2.51
  - 2.515
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.58
  - 2.59
  - 2.6
  - 2.6×10D
  - 2.61
  - 2.615
  - 2.62
  - 2.63
  - 2.64
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.7×10D
  - 2.71
  - 2.715
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.78
  - 2.79
  - 2.8
  - 2.8×10D
  - 2.81
  - 2.815
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.9×10D
  - 2.91
  - 2.915
  - 2.92
  - 2.93
  - 2.94
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3×10D
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.1×10D
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.18
  - 3.19
  - 3.2
  - 3.2×10D
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.264
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.3×10D
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.4×10D
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.5×10D
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.58
  - 3.59
  - 3.6
  - 3.6×10D
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.7×10D
  - 3.71
  - 3.72
  - 3.73
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.8×10D
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.9×10D
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4×10D
  - 4.01
  - 4.02
  - 4.03
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.1×10D
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.168
  - 4.17
  - 4.18
  - 4.19
  - 4.2
  - 4.2×10D
  - 4.21
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.3×10D
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.4×10D
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.5×10D
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.6×10D
  - 4.61
  - 4.62
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.7×10D
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.8×10D
  - 4.81
  - 4.82
  - 4.828
  - 4.83
  - 4.84
  - 4.85
  - 4.86
  - 4.864
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.9×10D
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5×10D
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.1×10D
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.2×10D
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.3×10D
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.4×10D
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.5
  - 5.5×10D
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.557
  - 5.56
  - 5.57
  - 5.58
  - 5.59
  - 5.6
  - 5.6×10D
  - 5.61
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.7
  - 5.7×10D
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.8
  - 5.8×10D
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.9
  - 5.9×10D
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.97
  - 6
  - 6×10D
  - 6.01
  - 6.02
  - 6.03
  - 6.04
  - 6.05
  - 6.06
  - 6.07
  - 6.08
  - 6.09
  - 6.1
  - 6.1×10D
  - 6.13
  - 6.15
  - 6.2
  - 6.2×10D
  - 6.23
  - 6.25
  - 6.3
  - 6.3×10D
  - 6.33
  - 6.35
  - 6.352
  - 6.375
  - 6.4
  - 6.4×10D
  - 6.43
  - 6.45
  - 6.5
  - 6.5×10D
  - 6.53
  - 6.55
  - 6.6
  - 6.6×10D
  - 6.63
  - 6.65
  - 6.7
  - 6.7×10D
  - 6.73
  - 6.75
  - 6.8
  - 6.8×10D
  - 6.83
  - 6.85
  - 6.9
  - 6.9×10D
  - 6.93
  - 6.95
  - 6.97
- 7～7.98
  - 7
  - 7×10D
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.1
  - 7.1×10D
  - 7.13
  - 7.14
  - 7.15
  - 7.2
  - 7.2×10D
  - 7.23
  - 7.25
  - 7.3
  - 7.3×10D
  - 7.33
  - 7.34
  - 7.35
  - 7.36
  - 7.37
  - 7.38
  - 7.4
  - 7.4×10D
  - 7.43
  - 7.45
  - 7.49
  - 7.5
  - 7.5×10D
  - 7.52
  - 7.53
  - 7.54
  - 7.55
  - 7.6
  - 7.6×10D
  - 7.63
  - 7.65
  - 7.67
  - 7.7
  - 7.7×10D
  - 7.73
  - 7.75
  - 7.8
  - 7.8×10D
  - 7.83
  - 7.85
  - 7.9
  - 7.9×10D
  - 7.93
  - 7.94
  - 7.95
  - 7.97
  - 7.98
- 8～8.96
  - 8
  - 8×10D
  - 8.01
  - 8.02
  - 8.03
  - 8.04
  - 8.05
  - 8.06
  - 8.07
  - 8.08
  - 8.09
  - 8.1
  - 8.1×10D
  - 8.13
  - 8.15
  - 8.2
  - 8.2×10D
  - 8.23
  - 8.25
  - 8.3
  - 8.3×10D
  - 8.33
  - 8.35
  - 8.4
  - 8.4×10D
  - 8.43
  - 8.45
  - 8.5
  - 8.5×10D
  - 8.50000000000001
  - 8.53
  - 8.55
  - 8.58
  - 8.6
  - 8.6×10D
  - 8.61
  - 8.63
  - 8.65
  - 8.7
  - 8.7×10D
  - 8.73
  - 8.75
  - 8.8
  - 8.8×10D
  - 8.80000000000001
  - 8.83
  - 8.84
  - 8.85
  - 8.9
  - 8.9×10D
  - 8.90000000000001
  - 8.93
  - 8.95
  - 8.96
- 9～9.97
  - 9
  - 9×10D
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.1
  - 9.1×10D
  - 9.13
  - 9.15
  - 9.2
  - 9.2×10D
  - 9.20000000000001
  - 9.21
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.3
  - 9.3×10D
  - 9.30000000000001
  - 9.33
  - 9.34
  - 9.35
  - 9.36
  - 9.38
  - 9.4
  - 9.4×10D
  - 9.40000000000001
  - 9.43
  - 9.45
  - 9.5
  - 9.5×10D
  - 9.50000000000001
  - 9.52
  - 9.53
  - 9.54
  - 9.55
  - 9.6
  - 9.6×10D
  - 9.60000000000001
  - 9.63
  - 9.65
  - 9.7
  - 9.7×10D
  - 9.70000000000001
  - 9.73
  - 9.75
  - 9.8
  - 9.8×10D
  - 9.80000000000001
  - 9.83
  - 9.85
  - 9.9
  - 9.9×10D
  - 9.90000000000001
  - 9.92
  - 9.93
  - 9.95
  - 9.96
  - 9.97
- 10～10.96
  - 10
  - 10×10D
  - 10.01
  - 10.02
  - 10.03
  - 10.04
  - 10.05
  - 10.06
  - 10.07
  - 10.08
  - 10.09
  - 10.1
  - 10.1×10D
  - 10.13
  - 10.15
  - 10.2
  - 10.2×10D
  - 10.23
  - 10.25
  - 10.3
  - 10.3×10D
  - 10.32
  - 10.33
  - 10.35
  - 10.4
  - 10.4×10D
  - 10.43
  - 10.45
  - 10.5
  - 10.5×10D
  - 10.53
  - 10.55
  - 10.6
  - 10.6×10D
  - 10.63
  - 10.65
  - 10.7
  - 10.7×10D
  - 10.72
  - 10.73
  - 10.75
  - 10.8
  - 10.8×10D
  - 10.83
  - 10.85
  - 10.9
  - 10.9×10D
  - 10.93
  - 10.95
  - 10.96
- 11～11.96
  - 11
  - 11×10D
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.1×10D
  - 11.11
  - 11.13
  - 11.15
  - 11.2
  - 11.2×10D
  - 11.22
  - 11.23
  - 11.24
  - 11.25
  - 11.3
  - 11.3×10D
  - 11.33
  - 11.34
  - 11.35
  - 11.36
  - 11.38
  - 11.4
  - 11.4×10D
  - 11.43
  - 11.45
  - 11.5
  - 11.5×10D
  - 11.51
  - 11.53
  - 11.55
  - 11.56
  - 11.6
  - 11.6×10D
  - 11.63
  - 11.65
  - 11.7
  - 11.7×10D
  - 11.73
  - 11.75
  - 11.8
  - 11.8×10D
  - 11.83
  - 11.85
  - 11.9
  - 11.9×10D
  - 11.91
  - 11.93
  - 11.95
  - 11.96
- 12～12.96
  - 12
  - 12×10D
  - 12.01
  - 12.02
  - 12.03
  - 12.04
  - 12.05
  - 12.06
  - 12.07
  - 12.08
  - 12.09
  - 12.1
  - 12.2
  - 12.25
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.75
  - 12.8
  - 12.9
  - 12.96
- 13～13.95
  - 13
  - 13.1
  - 13.2
  - 13.25
  - 13.3
  - 13.4
  - 13.49
  - 13.5
  - 13.6
  - 13.7
  - 13.75
  - 13.8
  - 13.89
  - 13.9
  - 13.95
- 14～14.96
  - 14
  - 14.1
  - 14.2
  - 14.25
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.68
  - 14.7
  - 14.75
  - 14.8
  - 14.9
  - 14.95
  - 14.96
- 15～15.95
  - 15
  - 15.08
  - 15.1
  - 15.2
  - 15.25
  - 15.3
  - 15.4
  - 15.48
  - 15.5
  - 15.6
  - 15.7
  - 15.75
  - 15.8
  - 15.87
  - 15.9
  - 15.95
- 16～16.9
  - 16
  - 16.00 to 16.99
  - 16.1
  - 16.2
  - 16.25
  - 16.27
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.67
  - 16.7
  - 16.75
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.07
  - 17.1
  - 17.2
  - 17.25
  - 17.3
  - 17.4
  - 17.46
  - 17.5
  - 17.6
  - 17.7
  - 17.75
  - 17.8
  - 17.86
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.25
  - 18.26
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.65
  - 18.7
  - 18.75
  - 18.8
  - 18.9
- 19～19.95
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.25
  - 19.3
  - 19.4
  - 19.45
  - 19.5
  - 19.6
  - 19.7
  - 19.75
  - 19.8
  - 19.84
  - 19.9
  - 19.95
- 20～20.9
  - 20
  - 20.1
  - 20.2
  - 20.24
  - 20.25
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.64
  - 20.7
  - 20.75
  - 20.8
  - 20.9
- 21～21.9
  - 21
  - 21.03
  - 21.1
  - 21.2
  - 21.25
  - 21.3
  - 21.4
  - 21.43
  - 21.5
  - 21.6
  - 21.7
  - 21.75
  - 21.8
  - 21.83
  - 21.9
- 22～22.9
  - 22
  - 22.1
  - 22.2
  - 22.22
  - 22.25
  - 22.3
  - 22.4
  - 22.5
  - 22.6
  - 22.62
  - 22.7
  - 22.75
  - 22.8
  - 22.9
- 23～23.9
  - 23
  - 23.02
  - 23.1
  - 23.2
  - 23.25
  - 23.3
  - 23.4
  - 23.42
  - 23.5
  - 23.6
  - 23.7
  - 23.75
  - 23.8
  - 23.81
  - 23.9
- 24～24.9
  - 24
  - 24.1
  - 24.2
  - 24.21
  - 24.25
  - 24.3
  - 24.4
  - 24.5
  - 24.5/24.7
  - 24.6
  - 24.61
  - 24.7
  - 24.75
  - 24.8
  - 24.9
- 25～25.9
  - 25
  - 25.1
  - 25.2
  - 25.25
  - 25.3
  - 25.4
  - 25.5
  - 25.6
  - 25.7
  - 25.75
  - 25.8
  - 25.9
- 26～26.99
  - 26
  - 26.1
  - 26.19
  - 26.2
  - 26.25
  - 26.3
  - 26.4
  - 26.5
  - 26.5/26.7
  - 26.59
  - 26.6
  - 26.7
  - 26.75
  - 26.8
  - 26.9
  - 26.99
- 27～27.9
  - 27
  - 27.1
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.7
  - 27.75
  - 27.78
  - 27.8
  - 27.9
- 28～28.9
  - 28
  - 28.1
  - 28.2
  - 28.25
  - 28.3
  - 28.4
  - 28.5
  - 28.57
  - 28.6
  - 28.7
  - 28.8
  - 28.9
- 29～29.9
  - 29
  - 29.1
  - 29.2
  - 29.25
  - 29.3
  - 29.37
  - 29.4
  - 29.5
  - 29.6
  - 29.7
  - 29.8
  - 29.9
- 30～30.8
  - 30
  - 30.1
  - 30.2
  - 30.3
  - 30.5
  - 30.7
  - 30.8
- 31～31.8
  - 31
  - 31.2
  - 31.3
  - 31.5
  - 31.7
  - 31.75
  - 31.8
- 32～32.8
  - 32
  - 32.2
  - 32.3
  - 32.5
  - 32.7
  - 32.8
- 33～33.5
  - 33
  - 33.5
- 34～34.5
  - 34
  - 34.5
- 35～35.5
  - 35
  - 35.5
- 36～36.91
  - 36
  - 36.12
  - 36.5
  - 36.91
- 37～37.7
  - 37
  - 37.5
  - 37.7
- 38～38.5
  - 38
  - 38.1
  - 38.5
- 39～39.5
  - 39
  - 39.5
- 40～40.88
  - 40
  - 40.5
  - 40.8
  - 40.88
- 41～41.67
  - 41
  - 41.5
  - 41.67
- 42～42.5
  - 42
  - 42.5
- 43～43.5
  - 43
  - 43.5
- 44～44.5
  - 44
  - 44.5
- 45～45.5
  - 45
  - 45.5
- 46～46.83
  - 46
  - 46.5
  - 46.83
- 47～47.5
  - 47
  - 47.5
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.8
  - 50
  - 50.5
  - 50.8
- 51～51.5
  - 51
  - 51.5
- 52～52.5
  - 52
  - 52.5
- 53～53.5
  - 53
  - 53.4
  - 53.5
- 54～54.5
  - 54
  - 54.5
- 55～55.5
  - 55
  - 55.2
  - 55.5
- 56～56.5
  - 56
  - 56.5
- 57～57.5
  - 57
  - 57.5
- 58～58.5
  - 58
  - 58.5
- 59～59.5
  - 59
  - 59.5
- 60～60.5
  - 60
  - 60.5
- 61～61.5
  - 61
  - 61.5
- 62～62.5
  - 62
  - 62.5
- 63～63.5
  - 63
  - 63.5
- 64～64.5
  - 64
  - 64.5
- 65～65.5
  - 65
  - 65.5
- 66～66.5
  - 66
  - 66.5
- 67～67.5
  - 67
  - 67.5
- 68～68.5
  - 68
  - 68.5
- 69～69.5
  - 69
  - 69.5
- 70～70.5
  - 70
  - 70.5
- 71～71.5
  - 71
  - 71.5
- 72～72.5
  - 72
  - 72.5
- 73～73.5
  - 73
  - 73.5
- 74～74.5
  - 74
  - 74.5
- 75
- 76
- 77
- 78
- 79～79.5
  - 79
  - 79.5
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89～89.5
  - 89
  - 89.5
- 90
- 91～91.5
  - 91
  - 91.5
- 92～92.5
  - 92
  - 92.5
- 93
- 94～94.5
  - 94
  - 94.5
- 95～95.5
  - 95
  - 95.5
- 96
- 97
- 98
- 99
- 100
- 103
- 105
- 110
- 115
- 120
Drawing

Clear

Groove Length (ℓ)(mm)
- 0～0.9
  - 0
  - 0.015
  - 0.025
  - 0.04
  - 0.05
  - 0.06
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.12
  - 0.14
  - 0.15
  - 0.16
  - 0.18
  - 0.2
  - 0.22
  - 0.24
  - 0.25
  - 0.3
  - 0.33
  - 0.4
  - 0.44
  - 0.48
  - 0.5
  - 0.55
  - 0.6
  - 0.7
  - 0.8
  - 0.88
  - 0.9
- 1～1.98
  - 1
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.65
  - 1.7
  - 1.8
  - 1.9
  - 1.98
- 2～2.97
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.31
  - 2.4
  - 2.5
  - 2.6
  - 2.64
  - 2.7
  - 2.8
  - 2.97
- 3～3.9
  - 3
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.8
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.7
  - 5.8
- 6～6.8
  - 6
  - 6.2
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.8
- 7～7.8
  - 7
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.8
- 8～8.8
  - 8
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.8
- 9～9.8
  - 9
  - 9.2
  - 9.3
  - 9.5
  - 9.6
  - 9.8
- 10～10.8
  - 10
  - 10..1
  - 10.2
  - 10.5
  - 10.6
  - 10.8
- 11～11.8
  - 11
  - 11.1
  - 11.3
  - 11.4
  - 11.5
  - 11.7
  - 11.8
- 12～12.8
  - 12
  - 12.2
  - 12.3
  - 12.5
  - 12.6
  - 12.8
- 13～13.8
  - 13
  - 13.1
  - 13.2
  - 13.5
  - 13.8
- 14～14.9
  - 14
  - 14.3
  - 14.4
  - 14.5
  - 14.8
  - 14.9
- 15～15.8
  - 15
  - 15.3
  - 15.6
  - 15.8
- 16～16.8
  - 16
  - 16.05
  - 16.1
  - 16.2
  - 16.5
  - 16.7
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.8
- 18～18.9
  - 18
  - 18.5
  - 18.6
  - 18.8
  - 18.9
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.55
  - 19.6
  - 19.7
  - 19.8
- 20～20.7
  - 20
  - 20.3
  - 20.4
  - 20.7
- 21～21.8
  - 21
  - 21.2
  - 21.4
  - 21.6
  - 21.8
- 22～22.8
  - 22
  - 22.05
  - 22.1
  - 22.2
  - 22.5
  - 22.8
- 23～23.9
  - 23
  - 23.3
  - 23.4
  - 23.9
- 24～24.8
  - 24
  - 24.25
  - 24.3
  - 24.5
  - 24.6
  - 24.8
- 25～25.8
  - 25
  - 25.2
  - 25.5
  - 25.7
  - 25.8
- 26～26.6
  - 26
  - 26.1
  - 26.3
  - 26.4
  - 26.6
- 27～27.8
  - 27
  - 27.6
  - 27.8
- 28～28.8
  - 28
  - 28.1
  - 28.2
  - 28.5
  - 28.8
- 29～29.5
  - 29
  - 29.3
  - 29.4
  - 29.5
- 30～30.8
  - 30
  - 30.6
  - 30.8
- 31～31.7
  - 31
  - 31.2
  - 31.5
  - 31.7
- 32～32.4
  - 32
  - 32.3
  - 32.4
- 33～33.8
  - 33
  - 33.5
  - 33.6
  - 33.8
- 34～34.8
  - 34
  - 34.1
  - 34.5
  - 34.8
- 35～35.5
  - 35
  - 35.3
  - 35.5
- 36～36.8
  - 36
  - 36.5
  - 36.8
- 37～37.5
  - 37
  - 37.5
- 38～38.3
  - 38
  - 38.3
- 39～39.8
  - 39
  - 39.8
- 40～40.5
  - 40
  - 40.5
- 41～41.3
  - 41
  - 41.3
- 42～42.8
  - 42
  - 42.8
- 43～43.5
  - 43
  - 43.5
- 44～44.3
  - 44
  - 44.3
- 45
- 46
- 47
- 48
- 49
- 50～50.8
  - 50
  - 50.8
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58～58.04
  - 58
  - 58.04
- 59
- 60～60.05
  - 60
  - 60.05
- 61～61.58
  - 61
  - 61.58
- 62
- 63～63.13
  - 63
  - 63.13
- 64～64.89
  - 64
  - 64.89
- 65
- 66
- 67
- 68～68.42
  - 68
  - 68.42
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 130
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 140
- 142
- 143
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 155
- 156
- 158
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 167
- 168
- 169
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 180
- 181
- 182
- 183
- 184
- 185
- 188
- 189
- 190
- 191
- 195
- 196
- 197
- 198
- 200
- 205
- 206
- 207
- 208
- 210
- 212
- 214
- 215
- 216
- 218
- 219
- 220
- 222
- 223
- 224
- 225
- 227
- 230
- 231
- 232
- 234
- 235
- 239
- 240
- 242
- 245
- 248
- 250
- 252
- 253
- 254
- 255
- 257
- 258
- 260
- 263
- 264
- 265
- 267
- 270
- 272
- 274
- 275
- 276
- 277
- 280
- 282
- 285
- 287
- 290
- 292
- 295
- 298
- 300
- 302
- 305
- 310
- 315
- 318
- 320
- 321
- 322
- 323
- 325
- 327
- 330
- 337
- 340
- 343
- 350
- 360
- 370
- 372
- 385
- 400
- 402
- 432
- 440
- 450
- 460
- 500
- 512
- 550
- 600
- 692
- 700
- 860
- 1030
Drawing

Clear

Work Material
- General Steel
- Heat-Treated Steel
- High-Hardness Steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Tool Material Type
- High-Speed Steel
- Cobalt High-Speed Steel
- Powdered High-Speed Steel
- Carbide
- PCD
- High-Vanadium High-Speed Steel
Details

Clear

Overall Length (L)(mm)
19

20

21

22

23

24

25

26

27

28

30

32

34

35

36

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

101

101.6

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

208

209

210

211

212

214

215

216

218

219

220

221

222

223

224

225

226

227

228

229

230

232

233

234

235

236

237

238

240

241

242

243

244

245

246

247

248

249

250

251

252

253

255

256

257

258

259

260

261

263

265

267

268

269

270

271

272

274

275

276

278

280

281

282

284

285

286

289

290

291

293

294

295

296

297

298

300

301

302

303

305

306

310

314

315

317

319

320

321

322

323

325

327

330

334

335

339

340

342

343

344

345

349

350

351

354

355

359

360

363

364

365

367

369

370

371

374

375

380

383

385

386

390

393

397

398

399

400

403

405

406

408

410

412

413

416

417

418

420

422

423

425

426

427

428

430

432

435

436

437

440

442

445

447

450

455

459

460

465

470

475

480

485

490

495

500

510

514

520

524

525

529

530

534

540

550

552

557

560

562

572

582

592

600

602

612

625

700

740

800

910

1000

1080
Drawing

Clear

Link Model
Images

Clear

Coating Presence
- Included
- None
Clear

Coating Type
- TiAlN
- For General Steel (AlCrN etc.)
- TiCN
- TiN
- DLC
- Diamond Coat
- Non-Coated
- Others
Details

Clear

Oil-Hole Presence
- Included
- None
Clear

Narrow search by specifying Manufacturer

- MISUMI (54)
- C-Value ()
- GUHRING (126)
- Nachi-Fujikoshi (74)
- OSG (44)
- ATOM (20)
- DIJET (18)
- EIKOSHA (12)
- IWATATOOL (10)
- NS TOOL (9)
- ESCO (7)
- KYOWASEIKO (5)
- SANDVIK (5)
- FUKUDA (4)
- OKAZAKI (4)
- UNION TOOL (4)
- 7 LEADERS (3)
- ISHIHASHI (3)
- SAITOTWISTDRILL (3)
- BIGTOOL (2)
- DIXI (2)
- KYOCERA (2)
- OMIKOGYO (2)
- ASAHI TOOLS (1)
- SUMITOMO ELEC (1)
- THE CUT (1)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Drill

- Carbide Drill
- HSS Drill

Top of the page

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)

Contact Information: Contact Us

Inquiry Format

All Categories

Categories

Applications

Brands

How can we improve?

Nachi-Fujikoshi Drill

Search by specifying the lower class category

Configure

Stock

Specification/Dimensions

Metric / Inch

Hole Diameter (Drilling Diameter) D(mm)

Groove Length (ℓ)(mm)

Work Material

Tool Material Type

Overall Length (L)(mm)

Link Model

Coating Presence

Coating Type

Oil-Hole Presence

Narrow search by specifying Manufacturer

CAD

Related Categories to Drill

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)