(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
FUJIGEN Chamfering, Centering Tool
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
FUJIGEN
[Features]
· Only one tool needed for both gouging and C-chamfering. Improves productivity by helping reduce the number of tools used in ATC tool changes.
· The dedicated tip has a unique shape, eliminating the risk of vibration and damage.- Volume Discount
Days to Ship: 8 Days or more -
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.
- Volume Discount
Days to Ship: 8 Days or more -
FUJIGEN
[Features]
· Smallest class in the industry. A screw-on type, the smallest class in the industry thanks to its industry-smallest class tip (underneck diameter of φ6 mm).
· Interference of vise, clamp and the like can be avoided.
· Capable of machining previously unreachable locations.- Volume Discount
Days to Ship: 10 Days or more -
FUJIGEN
[Features]
· Dedicated for aluminum. : The blade tip shape is specialized for aluminum machining and provides a clean cut with less burring, reducing the need for burr removal after machining.
· Significantly reduces running cost thanks to its high strength and improved abrasion resistance.
· Achieves high runout accuracy within 5/1,000 mm.- Volume Discount
Days to Ship: 11 Days or more -
FUJIGEN
[Features]
· For drilling machines. Excellent sharpness is provided due to high-speed steel tip with breaker.
· Lineup of 30°, 45°, and 60° types.- Volume Discount
Days to Ship: 10 Days or more -
FUJIGEN
Tip materials are K10 class carbide / M20 class carbide.
- Volume Discount
Days to Ship: 10 Days or more -
FUJIGEN
[Features]
· Only one tool needed for both gouging and C-chamfering. Improves productivity by helping reduce the number of tools used in ATC tool changes.
· The dedicated tip has a unique shape, eliminating the risk of vibration and damage.- Volume Discount
Days to Ship: 8 Days or more -
FUJIGEN
[Features]
· Only one tool needed for both gouging and C-chamfering. Improves productivity by helping reduce the number of tools used in ATC tool changes.
· The dedicated tip has a unique shape, eliminating the risk of vibration and damage.- Volume Discount
Days to Ship: 8 Days or more -
FUJIGEN
[Features]
· A throw-away type requiring only a tip change (no tool correction required).
· This tool allows C-chamfering and conical gouging, while reducing the number of tools used in ATC tool changes, and improving machining speed and productivity.
· The shank diameter is φ16 and the cutting edge diameter is φ12, making it suitable for 60° chamfering in tight spaces.- Volume Discount
Days to Ship: 10 Days or more -
FUJIGEN
[Features]
· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.
· Improved tip shape and cutting edge specification improve machinability and chip discharge.
· Ultrafine particle base material has a new coating for a long service life- Volume Discount
Days to Ship: 10 Days or more -
FUJIGEN
[Features]
· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.
· Improved tip shape and cutting edge specification improve machinability and chip discharge.
· Ultrafine particle base material has a new coating for a long service life- Volume Discount
Days to Ship: 10 Days or more -
FUJIGEN
[Features]
· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.
· Improved tip shape and cutting edge specification improve machinability and chip discharge.
· Ultrafine particle base material has a new coating for a long service life- Volume Discount
Days to Ship: 10 Days or more -
FUJIGEN
[Features]
· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.
· Improved tip shape and cutting edge specification improve machinability and chip discharge.
· Ultrafine particle base material has a new coating for a long service life- Volume Discount
Days to Ship: 11 Days or more -
FUJIGEN
[Features]
· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.
· Improved tip shape and cutting edge specification improve machinability and chip discharge.
· Ultrafine particle base material has a new coating for a long service life- Volume Discount
Days to Ship: 11 Days or more -
FUJIGEN
[Features]
· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.
· Improved tip shape and cutting edge specification improve machinability and chip discharge.
· Ultrafine particle base material has a new coating for a long service life- Volume Discount
Days to Ship: 11 Days or more -
FUJIGEN
[Features]
· Wide variety. Angle can be selected from 15° to 75° (5° increments) according to applications.
· Tips are available in many types to support diverse workpieces.- Volume Discount
Days to Ship: 11 Days or more -
FUJIGEN
[Features]
· C15 chamfering. An excellent finish without chattering after one round of chamfering.
· Chamfering performance next only to that of "Gentlemen" at a price equivalent to "Chamfering Cutter".- Volume Discount
Days to Ship: 11 Days or more -
FUJIGEN
[Features]
· The longest blade length. It is also possible to machine difficult-to-cut materials with a unique breaker with a tip blade length of 30 mm.
· Available in 13 angles from 15° to 75°.- Volume Discount
Days to Ship: 11 Days or more -
FUJIGEN
[Features]
· Reduction of work time. : The special tip shape enables high-feed processing- Volume Discount
Days to Ship: 11 Days or more -
FUJIGEN
[Features]
· Simultaneous chamfering. : Can be used for front and back chamfering, as well as side V-grooving- Volume Discount
Days to Ship: 12 Days or more -
FUJIGEN
[Features]
· Dedicated for back. : A specialized, dedicated tool for back chamfering- Volume Discount
Days to Ship: 10 Days or more -
FUJIGEN
[Features]
· Variable angle type. : Features a serrated structure and double-clamp mechanism that provides good part retention and prevents tip movement during machining.
· 0° to 90° at 5° pitch for easy, reliable angle adjustment- Volume Discount
Days to Ship: 12 Days or more -
FUJIGEN
[Features]
· Small diameter type. Small diameter type supporting smaller diameter machining than conventional chamfer cutters.
· Angle can be selected from 15° to 75° (5° increments) according to applications.
· Tips are available in many materials to support diverse workpieces.- Volume Discount
Days to Ship: 10 Days or more -
FUJIGEN
•Use: Chamfering / Horizontal
•Single Blade/Double Blade: Single Blade
•Point Angle(θ): 45
•Coating Type: Non-Coated
•Tool Diameter D (mm): 49.85～134.6- Volume Discount
Days to Ship: 12 Days or more -
Days to Ship: 12 Days or more -
FUJIGEN
[Features]
· Easy rounding change: Various round chamfering is possible by exchanging the tip.- Volume Discount
Days to Ship: 8 Days or more -
FUJIGEN
•Use: R Chamfer
•R Size (mm): 0.5~5
•Single Blade/Double Blade: Single Blade
•Coating Type: Non-Coated
•Tool Diameter D (mm): 25- Volume Discount
Days to Ship: 10 Days or more -
Days to Ship: 11 Days or more -
Days to Ship: 12 Days or more -
Days to Ship: 10 Days or more -
Days to Ship: 10 Days or more -
FUJIGEN
[Features]
· Front and back round and corner chamfering possible. Back and front C chamfering is also possible by exchanging the tip.
· Mini R is for front only.
· Uses a tip that allows 8 corners to be used.- Volume Discount
Days to Ship: 11 Days or more -
Days to Ship: 10 Days or more -
Tips for Chibieco and Chibieco 2 TXMT080206
FUJIGEN
Tip material is micro grain carbide.
- Volume Discount
Days to Ship: 11 Days or more -
Days to Ship: 11 Days or more -
Days to Ship: 11 Days or more -
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide / HSS.
- Volume Discount
Days to Ship: 11 Days or more -
Days to Ship: 9 Days or more -
Days to Ship: 11 Days or more -
Tip for Chamfering Cutter / RC End Cutter / Baitender T32MOR
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide.
- Volume Discount
Days to Ship: 11 Days or more -
Tip for Chamfering Cutter / RC End Cutter / Baitender TT32GUR
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.
- Volume Discount
Days to Ship: 8 Days or more -
Days to Ship: 11 Days or more -
FUJIGEN
Tip materials are M20 class carbide / micro grain carbide.
- Volume Discount
Days to Ship: 8 Days or more -
FUJIGEN
Tip materials are K10 class carbide / M20 class carbide / micro grain carbide.
- Volume Discount
Days to Ship: 9 Days or more -
FUJIGEN
Tip material is HSS.
For complete product overview and details on Tip for Mentoru-B TM32GUR-HSS see the sections below:- Volume Discount
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Use |
| Point Angle (θ) |
| Tool Diameter (D)(mm) |
| Work Material |
| Single Blade / Double Blade |
| Peripheral Blade Availability |
| Tool Material Type |
| Coating Presence |
| Coating Type |
| R Size ( R )(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN |
| Product Series | Tip for Chamfering Cutter / RC End Cutter / Baitender T32MOR | Tip for Chamfering Cutter / RC End Cutter / Baitender TT32GUR | |||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 8 Days or more | 8 Days or more | 10 Days or more | 11 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 11 Days or more | 11 Days or more | 11 Days or more | 11 Days or more | 11 Days or more | 11 Days or more | 11 Days or more | 12 Days or more | 10 Days or more | 12 Days or more | 10 Days or more | 12 Days or more | 12 Days or more | 8 Days or more | 10 Days or more | 11 Days or more | 12 Days or more | 10 Days or more | 10 Days or more | 11 Days or more | 10 Days or more | 11 Days or more | 11 Days or more | 11 Days or more | 11 Days or more | 9 Days or more | 11 Days or more | 11 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 9 Days or more | 8 Days or more |
| Use | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) / Chamfering / Horizontal | Chamfering / Horizontal | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) / Chamfering / Horizontal | Chamfering / Horizontal | Chamfering / Horizontal | Chamfering / Horizontal | Chamfering / Horizontal | Chamfering / Horizontal | Chamfering / Horizontal | Chamfering / Horizontal | Chamfering / Horizontal / V Groove | Chamfering / Horizontal | Chamfering / Horizontal / V Groove | Chamfering / Horizontal | Chamfering / Horizontal | Chamfering / Horizontal | R Chamfer | R Chamfer | R Chamfer | R Chamfer | R Chamfer | R Chamfer | R Chamfer | R Chamfer | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) / Chamfering / Horizontal | Chamfering / Horizontal / R Chamfer | Chamfering / Horizontal / R Chamfer | Chamfering / Horizontal | Chamfering / Horizontal | Chamfering / Horizontal | Chamfering / Horizontal |
| Point Angle (θ) | 90 ～ 118 | - | 90 ～ 120 | 90 | 30 ～ 60 | - | 90 | 90 ～ 120 | 60 | 90 ～ 120 | 90 ～ 120 | 90 ～ 120 | 30 ～ 60 | 30 ～ 60 | 30 ～ 60 | 15 ～ 70 | 30 ～ 60 | 15 ～ 75 | 45 | 45 | 45 | 0–90 | 15 ～ 75 | 45 | 45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tool Diameter (D)(mm) | 13.5 ～ 16.15 | - | 6 ～ 7.4 | 4 ～ 10 | 21.77 ～ 67.94 | - | 9 | 22.5 ～ 26.6 | 11.88 | 10.3 ～ 12.3 | 14.2 ～ 17.1 | 22 ～ 26.6 | 16.5 ～ 18.6 | 22.3 ～ 25.3 | 34.1 ～ 36.9 | 29.9 ～ 37.9 | 58.2 ～ 62.2 | 50.7 ～ 73.3 | 34.9 | 19.5 ～ 45.6 | 6.2 ～ 14 | - | 13.5 ～ 18.2 | 49.85～134.6 | 16 | - | 25 | 56 | 35.4 | 69.2 | 25 | 30 ～ 48 | 16 | - | - | - | - | - | - | - | - | - | - | - | - |
| Work Material | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | Aluminum[○] / Resin[○] | - | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | - |
| Single Blade / Double Blade | Single Blade | - | Single Blade | Single Blade | Single Blade | - | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | - | - | - | - | - | - | - | - | - | - | - | - |
| Peripheral Blade Availability | None | - | None | None | None | - | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | - | - | - | - | - | - | - | - | - | - | - | - |
| Tool Material Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Coating Presence | None | Included / None | None | None | None | Included / None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | Included | Included | Included | Included / None | Included / None | Included | Included / None | Included / None | None | Included | Included / None | Included / None |
| Coating Type | Non-Coated | TiAlN / TiN / Non-Coated / AlCrN | Non-Coated | Non-Coated | Non-Coated | TiAlN / TiN / Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | AlCrN | AlCrN | AlCrN | TiAlN / TiN / Non-Coated | TiAlN / TiN / Non-Coated | AlCrN | TiN / Non-Coated | TiAlN / TiN / Non-Coated / AlCrN | Non-Coated | AlCrN | Non-Coated / AlCrN | TiAlN / Non-Coated |
| R Size ( R )(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.5 to 4 | 0.5~5 | 0.5~5 | 5–10 | 5–10 | 1–3 | 0.5~5 ～ 1–5 | 1–5 | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Use
-
Centering (Positioning)
-
Hole Chamfer
-
Chamfering / Horizontal
-
V Groove
-
R Chamfer
-
Engraving
-
Drilling
-
Others
-
Centering (Positioning)
-
Metric / Inch
-
Point Angle (θ)
-
Tool Diameter (D)(mm)
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.55
- 0.6
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1–6
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
- 2
- 2.
- 2–10
- 2～13
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3~14
- 3 to 15
- 3.1
- 3.15
- 3.2
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 8
- 8.2
- 8.3
- 8.4
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.52
- 10
- 10.1
- 10.3
- 10.4
- 10.5
- 10.8
- 11
- 11.1
- 11.2
- 11.4
- 11.5
- 11.88
- 12
- 12.1
- 12.3
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 15
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 16
- 16.15
- 16.3
- 16.5
- 17
- 17.1
- 17.7
- 18
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.5
- 21
- 21.77
- 22
- 22.3
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- 25.2
- 25.3
- 25.4
- 26
- 26.5
- 26.6
- 27
- 27.5
- 28
- 28.5
- 29
- 29.9
- 30
- 30.2
- 30.5
- 31
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57
- 57.9
- 58
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 76
- 80
- 90
- 95
- 100
-
Work Material
- General Steel
- Heat-Treated Steel
- High-Hardness Steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
-
Single Blade / Double Blade
-
Peripheral Blade Availability
-
Tool Material Type
-
Coating Presence
-
Coating Type
-
R Size ( R )(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- 3.25
- 3.5
- 3.75
- 4
- 4RM
- 4RY
- 4.25
- 4.5
- 4.75
- 5
- 5RM
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- 6.25
- 6.5
- 6.75
- 7
- 7.25
- 7.5
- 7.75
- 8
- 8.25
- 8.5
- 8.75
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- XRM
- XRY
Narrow search by specifying Manufacturer
-
- MISUMI (42)
- FUJIGEN (71)
- IWATATOOL (43)
- NOGA JAPAN (43)
- YAMAWA (42)
- GUHRING (25)
- OSG (22)
- EIKOSHA (18)
- DAISHOWASEIKI (15)
- NINE9 (9)
- ILIX (8)
- ATOM (7)
- KYOWASEIKO (7)
- OKABE (7)
- S&K (7)
- TAIYO TOOL (6)
- OKAZAKI (5)
- DIJET (4)
- DIXI (4)
- ESCO (4)
- FUKUDA (4)
- ASAHI TOOLS (3)
- Trusco Nakayama (2)
- 7 LEADERS (1)
- MAPAL (1)
- NS TOOL (1)
- Poulten&Graf (1)
- SKC (1)
- STARM (1)
- UNION TOOL (1)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy