(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
The externally threaded stem is held by a nut from the opposite side of the locating pin orientation. Nylon at the tip prevents scratching of the workpiece. Options available in tool steel or stainless steel, additionally configurable heat treatment: hardened. P, B and L parameters are configurable and D is selectable. Thread size options from M3 to M10.
Part Number
Configured Part Number is shown.
Material No. | Pin | Head | Type | D Tolerance and Shape Code | |
[ M ]Material | [ H ]Hardness | [ M ]Plastic Material | |||
① | O1 Tool Steel | Treated Hardness: 60 ~ 63HRC | MC Nylon | JPPH | NA (Threaded, g6) |
② | 304 Stainless Steel | - | SJPPH | ||
③ | 440C or 420 Stainless Steel | Treated Hardness: 50 ~ 55HRC | CJPPH |
Part Number | - | P | - | L | - | B | ||||
Type | Shape | D | ||||||||
JPPH | NA | 8 | - | P10.00 | - | L10 | - | B5.5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | x | M (Coarse) | |||
Type | Shape Code | D | D Tolerance g6 | ||||||
JPPH SJPPH CJPPH | NA | 5 | -0.004 -0.012 | 5.50~8.00 | 3~10 | 2.0~10.0 | 5 | 4 | M5 |
6 | -0.004 -0.012 | 6.50~10.00 | 3~10 | 2.0~12.0 | 5 | 4 | M6 | ||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 2.0~15.0 | 5 | 4 | M8 | ||
10 | -0.005 -0.014 | 11.00~15.00 | 5~15 | 3.0~20.0 | 5 | 4 | M10 | ||
12 | -0.006 -0.017 | 13.00~16.00 | 8~15 | 5 | 4 | M12 | |||
16 | -0.006 -0.017 | 17.00~25.00 | 8~20 | 5.0~20.0 | 6 | 5 | M16 | ||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 6 | 5 | M20 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
CJPPHNA5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1] |
CJPPHNA6-P[6.5-10/0.01]-L[3-10/1]-B[2-12/0.1] |
CJPPHNA8-P[9-13/0.01]-L[5-10/1]-B[2-15/0.1] |
CJPPHNA10-P[11-15/0.01]-L[5-15/1]-B[3-20/0.1] |
CJPPHNA12-P[13-16/0.01]-L[8-15/1]-B[3-20/0.1] |
CJPPHNA16-P[17-25/0.01]-L[8-20/1]-B[5-20/0.1] |
CJPPHNA20-P[22-30/0.01]-L[10-20/1]-B[5-20/0.1] |
JPPHNA5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1] |
JPPHNA6-P[6.5-10/0.01]-L[3-10/1]-B[2-12/0.1] |
JPPHNA8-P[9-13/0.01]-L[5-10/1]-B[2-15/0.1] |
JPPHNA10-P[11-15/0.01]-L[5-15/1]-B[3-20/0.1] |
JPPHNA12-P[13-16/0.01]-L[8-15/1]-B[3-20/0.1] |
JPPHNA16-P[17-25/0.01]-L[8-20/1]-B[5-20/0.1] |
JPPHNA20-P[22-30/0.01]-L[10-20/1]-B[5-20/0.1] |
SJPPHNA5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1] |
SJPPHNA6-P[6.5-10/0.01]-L[3-10/1]-B[2-12/0.1] |
SJPPHNA8-P[9-13/0.01]-L[5-10/1]-B[2-15/0.1] |
SJPPHNA10-P[11-15/0.01]-L[5-15/1]-B[3-20/0.1] |
SJPPHNA12-P[13-16/0.01]-L[8-15/1]-B[3-20/0.1] |
SJPPHNA16-P[17-25/0.01]-L[8-20/1]-B[5-20/0.1] |
SJPPHNA20-P[22-30/0.01]-L[10-20/1]-B[5-20/0.1] |
Loading...
Basic Shape | Large Head | Head Shape | Round | Head Tip Shape | Tapered |
---|---|---|---|---|---|
Drive | No | Shank Style | Male thread | Surface Finish | No |
Tolerance of Positioning Side Outer Diameter | 0/-0.01 | Shank Dia. Tolerance | g6 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy