(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Straight, Tapered-shaped Locating Pins with the angle selectable
[FY21 new product]
・Configurable D dimension can be specified in increments of 0.01mm (new product type)
Part Number
Configured Part Number is shown.
Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type |
Standard | ||||
① | O1 Tool Steel Equivalent | - | Treated Hardness: 60 ~ 63HRC | LPSTA |
② | O1 Tool Steel Equivalent | Hard Chrome Plating | Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GLPSTA |
③ | O1 Tool Steel Equivalent | - | - | BLPSTA |
④ | 304 Stainless Steel | - | - | SLPSTA |
⑤ | 304 Stainless Steel | Hard Chrome Plating | Plating Hardness: 750HV ~ | HLPSTA |
⑥ | 440C or 420 Stainless Steel | - | Treated Hardness: 50 ~ 55HRC | CLPSTA |
Part Number | - | L | - | E | - | A | ||||
Type | D Tol. | D | ||||||||
LPSTA | M | 6 | - | L14.0 | - | E2.5 | - | A30 |
D | Standard Grade | |||
M | P | G | H | |
m6 | p6 | g6 | h7 | |
5~6 | +0.012 +0.004 | +0.020 +0.012 | -0.004 -0.012 | 0 -0.012 |
8, 10 | +0.015 +0.006 | +0.024 +0.015 | -0.005 -0.014 | 0 -0.015 |
Part Number | L 0.1mm Increment | E 0.1mm Increment | A | C | ||
Type | D Tol. | D | ||||
LPSTA GLPSTA BLPSTA SLPSTA HLPSTA CLPSTA | M (m6) P (p6) G (g6) H (h7) | 1 | 3.0~10.0 | 0.5~10.0 | 15 30 45 60 | 0.1 |
2 | 3.0~20.0 | 0.5 | ||||
3 | 0.5 | |||||
4 | 3.0~25.0 | 1 | ||||
5 | 4.0~30.0 | 1 | ||||
6 | 5.0~40.0 | 1 | ||||
8 | 5.0~40.0 | 1.5 | ||||
10 | 2 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
BLPSTAG1-L[3-10/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAG2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAG3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAG4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAG5-L[4-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAG6-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAG8-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAG10-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAH1-L[3-10/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAH2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAH3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAH4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAH5-L[4-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAH6-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAH8-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAH10-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAM1-L[3-10/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAM2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAM3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAM4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAM5-L[4-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAM6-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAM8-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAM10-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAP1-L[3-10/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAP2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAP3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAP4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAP5-L[4-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAP6-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAP8-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
BLPSTAP10-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAG1-L[3-10/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAG2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAG3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAG4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAG5-L[4-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAG6-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAG8-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAG10-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAH1-L[3-10/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAH2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAH3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAH4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAH5-L[4-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAH6-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAH8-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAH10-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAM1-L[3-10/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAM2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAM3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAM4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAM5-L[4-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAM6-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAM8-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAM10-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAP1-L[3-10/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAP2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAP3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
CLPSTAP4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
Loading...
Basic Shape | Straight/With Air Vent | Head Shape | Round | Head Tip Shape | Tapered |
---|---|---|---|---|---|
Drive | No | Shank Style | Straight(Press Fit) |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy