(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
This is of the Sphere-shaped head with no edge.
Part Number
Configured Part Number is shown.
Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type | |
Round | Diamond | ||||
① | O1 Tool Steel Equivalent | - | Treated Hardness: 60 ~ 63HRC | JPGQS | JPGQD |
② | O1 Tool Steel Equivalent | Hard Chrome Plating | Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPGQS | GJPGQD |
③ | 304 Stainless Steel | - | - | SJPGQS | SJPGQD |
④ | 440C or 420 Stainless Steel | - | Treated Hardness: 50 ~ 55HRC | CJPGQS | CJPGQD |
Part Number | - | P | - | L | - | B |
JPGQS10 | - | P12.00 | - | L6 | - | B3.5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | d | ℓ1 | ℓ2 | C1 | (W) | ||||
Type | Shape | D | D Tolerance g6 | When D | When D≥P | |||||||
JPGQ GJPGQ SJPGQ CJPGQ | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 2.00~10.00 | 3~12 | 2.0~20.0 | 4.5 | 5 | 5 | 1 | 3 | 1.5 |
6S | -0.004 -0.012 | 2~12 | 4.5 | 2 | 5 | 0.5 | 3 | 1.5 | ||||
8 | -0.005 -0.014 | 3.00~13.00 | 4~16 | 2.0~20.0 (15.0) | 6.5 | 6 | 6 | 1.5 | 3.5 | 1.8 | ||
8S | -0.005 -0.014 | 3~16 | 6.5 | 3 | 6 | 0.5 | 3.5 | 1.8 | ||||
10 | -0.005 -0.014 | 3.00~15.00 | 5~20 | 3.0~20.0 | 8 | 8 | 8 | 2 | 4 | 2.2 | ||
10S | -0.005 -0.014 | 4~20 | 8 | 3 | 8 | 0.5 | 4 | 2.2 | ||||
12 | -0.006 -0.017 | 5.00~16.00 | 6~24 | 10 | 8 | 8 | 2 | 5 | 2.5 | |||
12S | -0.006 -0.017 | 5~24 | 10 | 4 | 8 | 0.5 | 5 | 2.5 | ||||
16 | -0.006 -0.017 | 10.00~25.00 | 8~32 | 5.0~20.0 | 14 | 8 | 8 | 3 | 7 | 4 | ||
16S | -0.006 -0.017 | 7~32 | 14 | 4 | 8 | 0.5 | 7 | 4 | ||||
20 | -0.007 -0.020 | 13.00~30.00 | 10~40 | 18 | 8 | 8 | 3 | 9 | 5 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
CJPGQD6-P[2-10/0.01]-L[3-12/1]-B[2-20/0.1] |
CJPGQD6S-P[2-10/0.01]-L[2-12/1]-B[2-20/0.1] |
CJPGQD8-P[3-13/0.01]-L[4-16/1]-B[2-20/0.1] |
CJPGQD8S-P[3-13/0.01]-L[3-16/1]-B[2-20/0.1] |
CJPGQD10-P[3-15/0.01]-L[5-20/1]-B[3-20/0.1] |
CJPGQD10S-P[3-15/0.01]-L[4-20/1]-B[3-20/0.1] |
CJPGQD12-P[5-16/0.01]-L[6-24/1]-B[3-20/0.1] |
CJPGQD12S-P[5-16/0.01]-L[5-24/1]-B[3-20/0.1] |
CJPGQD16-P[10-25/0.01]-L[8-32/1]-B[5-20/0.1] |
CJPGQD16S-P[10-25/0.01]-L[7-32/1]-B[5-20/0.1] |
CJPGQD20-P[13-30/0.01]-L[10-40/1]-B[5-20/0.1] |
CJPGQS6-P[2-10/0.01]-L[3-12/1]-B[2-20/0.1] |
CJPGQS6S-P[2-10/0.01]-L[2-12/1]-B[2-20/0.1] |
CJPGQS8-P[3-13/0.01]-L[4-16/1]-B[2-20/0.1] |
CJPGQS8S-P[3-13/0.01]-L[3-16/1]-B[2-20/0.1] |
CJPGQS10-P[3-15/0.01]-L[5-20/1]-B[3-20/0.1] |
CJPGQS10S-P[3-15/0.01]-L[4-20/1]-B[3-20/0.1] |
CJPGQS12-P[5-16/0.01]-L[6-24/1]-B[3-30/0.1] |
CJPGQS12S-P[5-16/0.01]-L[5-24/1]-B[3-30/0.1] |
CJPGQS16-P[10-25/0.01]-L[8-32/1]-B[5-30/0.1] |
CJPGQS16S-P[10-25/0.01]-L[7-32/1]-B[5-30/0.1] |
CJPGQS20-P[13-30/0.01]-L[10-40/1]-B[5-30/0.1] |
GJPGQD6-P[2-10/0.01]-L[3-12/1]-B[2-20/0.1] |
GJPGQD6S-P[2-10/0.01]-L[2-12/1]-B[2-20/0.1] |
GJPGQD8-P[3-13/0.01]-L[4-16/1]-B[2-20/0.1] |
GJPGQD8S-P[3-13/0.01]-L[3-16/1]-B[2-20/0.1] |
GJPGQD10-P[3-15/0.01]-L[5-20/1]-B[3-20/0.1] |
GJPGQD10S-P[3-15/0.01]-L[4-20/1]-B[3-20/0.1] |
GJPGQD12-P[5-16/0.01]-L[6-24/1]-B[3-20/0.1] |
GJPGQD12S-P[5-16/0.01]-L[5-24/1]-B[3-20/0.1] |
GJPGQD16-P[10-25/0.01]-L[8-32/1]-B[5-20/0.1] |
GJPGQD16S-P[10-25/0.01]-L[7-32/1]-B[5-20/0.1] |
GJPGQD20-P[13-30/0.01]-L[10-40/1]-B[5-20/0.1] |
GJPGQS6-P[2-10/0.01]-L[3-12/1]-B[2-20/0.1] |
GJPGQS6S-P[2-10/0.01]-L[2-12/1]-B[2-20/0.1] |
GJPGQS8-P[3-13/0.01]-L[4-16/1]-B[2-20/0.1] |
GJPGQS8S-P[3-13/0.01]-L[3-16/1]-B[2-20/0.1] |
GJPGQS10-P[3-15/0.01]-L[5-20/1]-B[3-20/0.1] |
GJPGQS10S-P[3-15/0.01]-L[4-20/1]-B[3-20/0.1] |
GJPGQS12-P[5-16/0.01]-L[6-24/1]-B[3-30/0.1] |
GJPGQS12S-P[5-16/0.01]-L[5-24/1]-B[3-30/0.1] |
GJPGQS16-P[10-25/0.01]-L[8-32/1]-B[5-30/0.1] |
GJPGQS16S-P[10-25/0.01]-L[7-32/1]-B[5-30/0.1] |
GJPGQS20-P[13-30/0.01]-L[10-40/1]-B[5-30/0.1] |
JPGQD6-P[2-10/0.01]-L[3-12/1]-B[2-20/0.1] |
JPGQD6S-P[2-10/0.01]-L[2-12/1]-B[2-20/0.1] |
JPGQD8-P[3-13/0.01]-L[4-16/1]-B[2-15/0.1] |
JPGQD8S-P[3-13/0.01]-L[3-16/1]-B[2-15/0.1] |
JPGQD10-P[3-15/0.01]-L[5-20/1]-B[3-20/0.1] |
JPGQD10S-P[3-15/0.01]-L[4-20/1]-B[3-20/0.1] |
JPGQD12-P[5-16/0.01]-L[6-24/1]-B[3-25/0.1] |
JPGQD12S-P[5-16/0.01]-L[5-24/1]-B[3-25/0.1] |
JPGQD16-P[10-25/0.01]-L[8-32/1]-B[5-30/0.1] |
JPGQD16S-P[10-25/0.01]-L[7-32/1]-B[5-30/0.1] |
JPGQD20-P[13-30/0.01]-L[10-40/1]-B[5-30/0.1] |
JPGQS6-P[2-10/0.01]-L[3-12/1]-B[2-20/0.1] |
JPGQS6S-P[2-10/0.01]-L[2-12/1]-B[2-20/0.1] |
JPGQS8-P[3-13/0.01]-L[4-16/1]-B[2-20/0.1] |
JPGQS8S-P[3-13/0.01]-L[3-16/1]-B[2-20/0.1] |
JPGQS10-P[3-15/0.01]-L[5-20/1]-B[3-20/0.1] |
Loading...
Basic Shape | Large Head / Small Head | Head Tip Shape | Spherical Surface | Drive | No |
---|---|---|---|---|---|
Tolerance of Positioning Side Outer Diameter | 0/-0.01 | Shank Dia. Tolerance | g6 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy