(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Screw-fitting type Locating Pins without pilot.
Part Number
Configured Part Number is shown.
Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type |
① | O1 Tool Steel | - | Treated Hardness: 60~63HRC | JPNG |
② | O1 Tool Steel | Hard Chrome Plating | Hardness: 50~55HRC Plating Hardness: 750HV~ | GJPNG |
③ | SKS3 Tool Steel or Equiv. | - | - | BJPNG |
④ | 304 Stainless Steel | - | - | SJPNG |
Part Number | - | P | - | B | - | R | - | G |
JPNGA3 JPNGB5 | - - | P4 P6 | - - | B2 B3 | - | R2 | - | G3 |
Part Number | P 0.1mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | ||
Type | Tip Shape | M (Coarse) | ||||
A Shape, C Shape only | B Shape only | |||||
JPNG GJPNG BJPNG SJPNG | A B C | 3 | 3.5~8.0 | 1.0~10.0 | A Shape R≥P/2 C Shape R≤P/2 | B Shape G≤P |
4 | 4.5~8.0 | |||||
5 | 5.5~8.0 | |||||
6 | 6.5~10.0 | 1.0~15.0 | ||||
8 | 9.0~15.0 | 1.0~30.0 | ||||
10 | 11.0~17.0 | 3.0~30.0 | ||||
12 | 13.0~20.0 | |||||
16 | 17.0~27.0 | 5.0~30.0 | ||||
20 | 21.0~30.0 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
BJPNGB3-P[3.5-8/0.1]-B[1-10/0.1]-G[1-8/1] |
BJPNGB4-P[4.5-8/0.1]-B[1-10/0.1]-G[1-7/1] |
BJPNGB5-P[5.5-8/0.1]-B[1-10/0.1]-G[1-8/1] |
BJPNGB6-P[6.5-10/0.1]-B[1-15/0.1]-G[1-10/1] |
BJPNGB8-P[9-15/0.1]-B[1-30/0.1]-G[1-15/1] |
BJPNGB10-P[11-17/0.1]-B[3-30/0.1]-G[1-15/1] |
BJPNGB12-P[13-20/0.1]-B[3-30/0.1]-G[1-18/1] |
BJPNGB16-P[17-27/0.1]-B[5-30/0.1]-G[1-25/1] |
BJPNGB20-P[21-30/0.1]-B[5-30/0.1]-G[1-30/1] |
GJPNGB3-P[3.5-8/0.1]-B[1-10/0.1]-G[1-8/1] |
GJPNGB4-P[4.5-8/0.1]-B[1-10/0.1]-G[1-7/1] |
GJPNGB5-P[5.5-8/0.1]-B[1-10/0.1]-G[1-8/1] |
GJPNGB6-P[6.5-10/0.1]-B[1-15/0.1]-G[1-10/1] |
GJPNGB8-P[9-15/0.1]-B[1-30/0.1]-G[1-15/1] |
GJPNGB10-P[11-17/0.1]-B[3-30/0.1]-G[1-17/1] |
GJPNGB12-P[13-20/0.1]-B[3-30/0.1]-G[1-18/1] |
GJPNGB16-P[17-27/0.1]-B[5-30/0.1]-G[1-25/1] |
GJPNGB20-P[21-30/0.1]-B[5-30/0.1]-G[1-30/1] |
JPNGB3-P[3.5-8/0.1]-B[1-10/0.1]-G[1-8/1] |
JPNGB4-P[4.5-8/0.1]-B[1-10/0.1]-G[1-8/1] |
JPNGB5-P[5.5-8/0.1]-B[1-10/0.1]-G[1-8/1] |
JPNGB6-P[6.5-10/0.1]-B[1-15/0.1]-G[1-10/1] |
JPNGB8-P[9-15/0.1]-B[1-30/0.1]-G[1-15/1] |
JPNGB10-P[11-17/0.1]-B[3-30/0.1]-G[1-17/1] |
JPNGB12-P[13-20/0.1]-B[3-30/0.1]-G[1-20/1] |
JPNGB16-P[17-27/0.1]-B[5-30/0.1]-G[1-27/1] |
JPNGB20-P[21-30/0.1]-B[5-30/0.1]-G[1-30/1] |
SJPNGB3-P[3.5-8/0.1]-B[1-10/0.1]-G[1-6/1] |
SJPNGB4-P[4.5-8/0.1]-B[1-10/0.1]-G[1-7/1] |
SJPNGB5-P[5.5-8/0.1]-B[1-10/0.1]-G[1-8/1] |
SJPNGB6-P[6.5-10/0.1]-B[1-15/0.1]-G[1-10/1] |
SJPNGB8-P[9-15/0.1]-B[1-30/0.1]-G[1-15/1] |
SJPNGB10-P[11-17/0.1]-B[3-30/0.1]-G[1-15/1] |
SJPNGB12-P[13-20/0.1]-B[3-30/0.1]-G[1-18/1] |
SJPNGB16-P[17-27/0.1]-B[5-30/0.1]-G[1-25/1] |
SJPNGB20-P[21-30/0.1]-B[5-30/0.1]-G[1-30/1] |
Loading...
Basic Shape | Large Head | Head Shape | Round | Drive | No |
---|---|---|---|---|---|
Shank Style | Male thread | Tolerance of Positioning Side Outer Diameter | 0/-0.1 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy