(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Retaining Block Housing Pins - Flat tip, internally threaded shank. (Part Numbers)

Retaining Block Housing Pins - Flat tip, internally threaded shank.

Available with flat head, internal threading, h7 tolerances and configurable length. The head shape is long. Black oxide surface treatment. It also has hardened heat treatment.

  • METRIC

Retaining Block Pin Holder:Related Image

Specifications

Retaining Block Pin Holder:Related Image
TypeP (H7)L
1mm increments
FL1 minL1 maxGCompatible
Flanged Pin
Compatible
Large Head Pin
IS-MB10T42~1709252723THATAT10T-PXX.X-BXXTHNTAT10T-PXX.X-BXX
1014323430THATAT10-PXX.X-BXXTHNTAT10-PXX.X-BXX
1217363834THATAT12-PXX.X-BXXTHNTAT12-PXX.X-BXX
1617363834THATAT16-PXX.X-BXXTHNTAT16-PXX.X-BXX

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
IS-MB10-L[42-170/1]
IS-MB10T-L[42-170/1]
IS-MB12-L[42-170/1]
IS-MB16-L[42-170/1]
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSMounted Side Outer Diameter D
(mm)
L
(mm)
1 Piece(s)

15 Days or more

101042 ~ 170
1 Piece(s)

15 Days or more

1010T42 ~ 170
1 Piece(s)

15 Days or more

101242 ~ 170
1 Piece(s)

15 Days or more

101642 ~ 170

Loading...

  1. 1

Example

Retaining Block Pin Holder:Related Image

Support Information

Characteristics of locating pins in other forms

Product NameFeatureCatalog
Small Diameter Locating PinsLocating Pins with Ø4 or less diameter suitable for small works.Click here
Locating Pins for Height AdjustingLocating Pins with short head for thin PC boards.Click here
Nonmagnetic Locating PinsNonmagnetic Aluminum locating pins suitable for environments where magnetism must be avoided. Click here
Plastic Locating PinsPlastic Locating Pins prevent work damages.Click here
Height Adjusting PinsLocating Pins suitable for locating in vertical direction.Click here
Support PinsPins for use in higher position to avoid interferences.Click here

Way to Use

MISUMI Automotive style Configurable pins (IS-NMF and IS-NML) are available with maximum head working length of 30 mm.

In some situations, the location of the actual locating area requires a longer pin. The Pin Holder is designed to be used with THNTAT or THATAT type pins with set screw mount style configured as shown above.

Specification table above shows the compatible pin types. Please, note that the Shank female thread size is M8, where Standard NAAMS size is M10

 

Basic Information

Basic Shape Large Head Head Shape Round Head Tip Shape Flat
Drive No Shank Style Female Thread Material SCM415 Alloy Steel (JIS)
Heat Treatment Hardened Surface Finish Black Oxide Tolerance of Positioning Side Outer Diameter h7
Shank Dia. Tolerance h7 Thread Diameter M(mm) 8 Dimension Configurable Type L Dimension Configurable

Additional Products in this Category

Complementary Products

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.