(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Small Diameter Straight Locating Pins - Tip type selectable. (SXKT-D2-L10)
- Volume Discount
- Lead Time Reduction
Locating pins with �4 or less pin diameter. Selectable from 4 different tip shapes.
- METRIC
- inCAD Components
Part Number
Configured Part Number is shown.
SXKT-D2-L10
・Materials
[ ! ]Features of W1-9 Tool Steel >>P.1310
| L Selectable | L Configurable | L Configurable and Tolerance Selectable Type | [ M ]Material | [ H ]Hardness | ||||||||
| Flat | Spherical | Tapered | Flat | Spherical | Taper R | Tapered | Flat | Spherical | Taper R | Tapered | ||
| SFKT | SPKT | SXKT | SFST | SPST | STST | SXST | SFFPT | SPPT | STPT | SXFPT | W1-9 Tool Steel | Treated Hardness: 50~58HRC |
| SFKS | SPKS | SXKS | SFSS | SPSS | STSS | SXSS | SFPS | SPPS | STPS | SXFPS | 304 Stainless Steel | - |
| - | - | - | SFSXC | SPSXC | STSXC | SXSXC | SFPXC | SPPXC | STPXC | SXFPXC | 440C or 420 Stainless Steel | Treated Hardness: 50~55HRC |
| - | - | - | - | SPSSG | - | - | - | - | - | - | 304 Stainless Steel (SR Parts Polished) | - |
| - | - | - | - | SPSDG | - | - | - | - | - | - | H13 Tool Steel (SR Parts Polished) | Treated Hardness: 40~52HRC |
Specifications
■L Selectable
■L Configurable
■L Configurable and Tolerance Selectable Type
| Part Number | - | D | - | L |
| SPKS | - | D1 | - | L5 |
| Part Number | - | D | - | L | - | E | |
| SPST SXST | - - | D1.5 D1.5 | - - | L8.5 L5.0 | - | E1.0 | (Sphere) (Tapered) |
| Part Number | - | D | - | L | - | E | |||
| Type | D Tol. | ||||||||
| SPPT SXFPT | P P | - - | D0.55 D2.82 | - - | L5.0 L5.0 | - | E2.5 | (Sphere) (Tapered) | |
■L Selectable
| Part Number | D | D Tolerance | L | E | |||||||||
| Flat SFKT SFKS | Spherical SPKT SPKS | Tapered SXKT SXKS | 1 | 0 -0.005 | 3 | 4 | 5 | 6 | 10 | 0.5 | |||
| 1.5 | 5 | 6 | 8 | ||||||||||
| 2 | 5 | 6 | 8 | 10 | 12 | 15 | |||||||
| 3 | 5 | 6 | 8 | 10 | 12 | 15 | 1 | ||||||
■L Configurable
[ ! ]For Taper R, L-1≥(Dx1.85)-(Rx2.75) [ ! ]For Tapered Type, L≥E+1D≥E
| Part Number | D 0.1mm Increment | Tolerance | L 0.5mm Increment | E 0.5mm Increment | R | |||
| Flat SFST SFSS SFSXC | Spherical SPST SPSS SPSXC SPSSG SPSDG | Taper R STST STSS STSXC | Tapered SXST SXSS SXSXC | 1.0~2.0 | 0 -0.005 | 3.0~30.0 | 0.5~2.5 | 0.2 |
| 2.1~3.0 | 0.4 | |||||||
■L Configurable and Tolerance Selectable Type
[ ! ]For Taper R, L-1≥(Dx1.85)-(Rx2.75) [ ! ]For Tapered Type, L≥E+1D≥E
| Part Number | D 0.01mm Increment | L 0.1mm Increment | E 0.5mm Increment | R | ||||
| Type | D Tolerance | |||||||
| Flat SFFPT SFPS SFPXC | Spherical SPPT SPPS SPPXC | Taper R STPT STPS STPXC | Tapered SXFPT SXFPS SXFPXC | P +0.005 0 Q±0.002 R 0 -0.005 H 0 -0.01 | 0.50~1.00 | 3.0~30.0 | 0.5~2.5 | - |
| 1.01~2.00 | 3.0~30.0 | 0.2 | ||||||
| 2.01~3.00 | 0.4 | |||||||
Price list
■L Selectable
| D | Unit Price | |||||
| Flat | Sphere | Tapered | ||||
| SFKT | SFKS | SPKT | SPKS | SXKT | SXKS | |
| 1 | 390 | 520 | 420 | 540 | 440 | 560 |
| 1.5 | 390 | 520 | 420 | 540 | 440 | 560 |
| 2 | 290 | 340 | 300 | 360 | 320 | 360 |
| 3 | 290 | 340 | 300 | 360 | 320 | 360 |
■L Configurable
| D | Unit Price | |||||||||||||
| Flat | Sphere | Taper R Type | Tapered | |||||||||||
| SFST | SFSS | SFSXC | SPST | SPSS | SPSXC | SPSSG | SPSDG | STST | STSS | STSXC | SXST | SXSS | SXSXC | |
| 1.0~2.0 | 720 | 900 | 1,200 | 750 | 940 | 1,270 | 1,670 | 1,210 | 820 | 1,030 | 1,390 | 800 | 980 | 1,310 |
| 2.1~3.0 | 480 | 600 | 810 | 500 | 630 | 850 | 1,490 | 1,180 | 550 | 680 | 930 | 530 | 620 | 840 |
■L Configurable and Tolerance Selectable Type
| D | Unit Price | |||||||||||
| Flat | Sphere | Taper R Type | Tapered | |||||||||
| SFFPT | SFPS | SFPXC | SPPT | SPPS | SPPXC | STPT | STPS | STPXC | SXFPT | SXFPS | SXFPXC | |
| 0.50~1.00 | 1,120 | 1,400 | - | 1,150 | 1,440 | - | - | - | - | - | - | - |
| 1.01~2.00 | 960 | 1,200 | 1,610 | 980 | 1,230 | 1,650 | 980 | 1,230 | 1,650 | 960 | 1,100 | 1,480 |
| 2.01~3.00 | 630 | 810 | 1,090 | 650 | 820 | 1,110 | 650 | 820 | 1,110 | 630 | 730 | 990 |
■Volume Discount Rate ([ ! ]Round down to nearest one yen) P.89
[ ! ]For orders larger than indicated quantity, please request a quotation.
[ ! ]For 70 or more identical pieces of in-stock items, please request a quotation.
| Quantity | 1~9 | 10~29 | 30~49 | 50~69 | 70~99 |
| Discount Rate | Unit Price | 5% | 20% | 30% | 40% |
[ ! ]For 70 or more identical pieces of in-stock items, please request a quotation.
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| SXKT-D2-L10 |
Loading...
Support Information
Characteristics of locating pins in other forms
| Product Name | Feature | Catalog |
|---|---|---|
| Small Diameter Locating Pins | Locating Pins with Ø4 or less diameter suitable for small works. | Click here |
| Locating Pins for Height Adjusting | Locating Pins with short head for thin PC boards. | Click here |
| Nonmagnetic Locating Pins | Nonmagnetic Aluminum locating pins suitable for environments where magnetism must be avoided. | Click here |
| Plastic Locating Pins | Plastic Locating Pins prevent work damages. | Click here |
| Height Adjusting Pins | Locating Pins suitable for locating in vertical direction. | Click here |
| Support Pins | Pins for use in higher position to avoid interferences. | Click here |
Compatible Models
Basic Information
| Basic Shape | Straight/With Air Vent | Head Shape | Round | Drive | No |
|---|---|---|---|---|---|
| Shank Style | Straight(Press Fit) | Surface Finish | No |
Please check the type/dimensions/specifications of the part SXKT-D2-L10 in the Small Diameter Straight Locating Pins - Tip type selectable. series.
Specification/Dimensions
-
Applicable Bolt M(mm)
- Provided
-
D(mm)
-
Overall Length L(mm)
-
Taper Length E(mm)
-
type
- SFFPT
- SFKS
- SFKT
- SFPS
- SFPXC
- SFSS
- SFST
- SFSXC
- SPKS
- SPKT
- SPPS
- SPPT
- SPPXC
- SPSDG
- SPSS
- SPSSG
- SPST
- SPSXC
- STPS
- STPT
- STPXC
- STSS
- STST
- STSXC
- SXFPS
- SXFPT
- SXFPXC
- SXKS
- SXKT
- SXSS
- SXST
- SXSXC
-
Head Tip Shape
-
Tapered -
Taper R -
Spherical Surface -
Flat
-
-
Material
- Steel
- Stainless Steel
- Steel
-
Heat Treatment
- No
- Hardened
-
Positioning Side Outer Diameter P(mm)
-
Tolerance of Positioning Side Outer Diameter
-
Positioning Portion Length L(mm)
-
ℓ1(mm)
- 0.5
- 1
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 6 Days or Less
- 8 Days or Less
- 9 Days or Less
- 12 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| SFKS-D1-L5 |
| SFKS-D1-L6 |
| SFKS-D1.5-L5 |
| SXKT-D2-L12 |
| SXKT-D2-L15 |
| SXKT-D2-L5 |
Additional Products in this Category
- Large Head Locating Pins - Round head, flat tip and externally threaded shank.
- Small Head Locating Pins - Round head, flat tip and internally threaded shank.
- Shoulder Locating Pins - Round or diamond shaped head, shank type and tip selectable.
- Small Head Locating Pins - Plastic, selectable head and tip, straight shank.
- Inch Small Head Locating Pins - Round or diamond head, ball point, straight shank, configurable P/L/B dimensions.
- Straight Locating Pins - Tapered or spherical head, hardened, internally threaded.
- Large Head Locating Pins - Round or diamond shaped head with tapered tip and stepped shank.
- Small Head Locating Pins - Round head with tapered tip and straight shank, configurable P/L/B/E dimensions.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy