(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Locating Pins with 3 types of tip shape selectable.
Part Number
Configured Part Number is shown.
Type | Mounting Shape | Material Code | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness |
LP (Round) LPD (Diamond) | M (Standard) U (Tapped) X (Threaded) | J | ①O1 Tool Steel | - | Treated Hardness: 55~60HRC |
G | ②O1 Tool Steel | Hard Chrome Plating | Hardness: 50~55HRC Plating Hardness: 750HV~ | ||
Y | ③1045 Carbon Steel | - | Treated Hardness: 45~50HRC or more | ||
B | ④1045 Carbon Steel | Black Oxide | Treated Hardness: 45~50HRC or more | ||
R | ⑤1045 Carbon Steel | Hard Chrome Plating | Hardness: 45~50HRC Plating Hardness: 750HV~ | ||
S | ⑥304 Stainless Steel | - | - | ||
D | ⑦304 Stainless Steel | Hard Chrome Plating | Plating Hardness: 750HV~ | ||
C | ⑧440C or 420 Stainless Steel | - | Treated Hardness: 50~55HRC |
Part Number | - | P | - | B | - | R | - | G | - | L | - | T | ||||||||
Type | Fixed Part | Material | Tip | D | ||||||||||||||||
LP LPD | U X | J J | B A | 8 10 | - - | P10.00 P11.98 | - - | B10.0 B5.0 | - | R10 | - | G8 | - - | L14 L10 | - - | T2.0 T5.0 |
Part Number | P 0.01mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | L 1mm Increment | T 0.5mm Increment | |||||
Type | Mounting Shape | Material Code | Tip Shape | D | |||||||
A Shape, C Shape only | B Shape only | M Shape, U Shape only | X Shape only | ||||||||
LP (Round) LPD (Diamond) [ ! ]Applicable when D≥3. | M (Standard) U (Tapped) (D≥6) X (Threaded) (D≥3) | J G Y B R S D C | A B C | 2 | 2.50~4.00 | 1.5~25.0 | A Shape R≥P/2 C Shape R≤P/2 | B Shape G≤P | 2~6 | - | 1.0~10.0 |
3 | 3.50~6.00 | 2.0~25.0(10.0) | 3~8(6) | 0~8(6) | |||||||
4 | 3.50~7.00 | 2.0~25.0(10.0) | 3(4)~10(8) | 0~10(8) | |||||||
5 | 4.00~8.00 | 2.0~30.0(10.0) | 5~15(10) | 0~15(10) | |||||||
6 | 5.00~10.00 | 2.0~40.0(12.0) | 6(10)~15(12) | 0~15(12) | |||||||
8 | 6.00~11.00 | 2.0~40.0(15.0) | 8(14)~16 | 0~16 | |||||||
10 | 8.00~13.00 | 3.0~50.0(20.0) | 10(14)~20 | 0~20 | |||||||
12 | 10.00~15.00 | 3.0~50.0(20.0) | 12(14)~24 | 0~24 | |||||||
16 | 13.00~18.00 | 5.0~50.0(20.0) | 16~32 | 0~32 | |||||||
20 | 16.00~22.00 | 5.0~50.0(20.0) | 20~40 | 0~40 |
D | Round Shape Unit Price | Diamond Shape Unit Price | ||||||||||||||
①O1 Tool Steel Hardened LPMJ | ②O1 Tool Steel (Hardened) LPMG | ③1045 Carbon Steel LPMY | ④1045 Carbon Steel Black Oxide LPMB | ⑤Hard 1045 Carbon Steel LPMR | ⑥304 Stainless Steel LPMS | ⑦Hard 304 Stainless Steel LPMD | ⑧440C Stainless Steel LPMC | ①O1 Tool Steel Hardened LPDMJ | ②O1 Tool Steel (Hardened) LPDMG | ③1045 Carbon Steel LPDMY | ④1045 Carbon Steel Black Oxide LPDMB | ⑤Hard 1045 Carbon Steel LPDMR | ⑥304 Stainless Steel LPDMS | ⑦Hard 304 Stainless Steel LPDMD | ⑧440C Stainless Steel LPDMC | |
2 | 1,060 | 1,430 | 1,000 | 1,160 | 1,270 | 1,370 | 1,640 | 1,690 | - | - | - | - | - | - | - | - |
3 | 1,140 | 1,530 | 1,080 | 1,250 | 1,360 | 1,480 | 1,760 | 1,820 | 1,520 | 2,050 | 1,440 | 1,670 | 1,820 | 1,970 | 2,350 | 2,430 |
4 | 1,290 | 1,740 | 1,220 | 1,410 | 1,540 | 1,670 | 1,990 | 2,060 | 1,670 | 2,250 | 1,580 | 1,830 | 2,000 | 2,170 | 2,580 | 2,670 |
5 | 1,370 | 1,840 | 1,300 | 1,500 | 1,640 | 1,780 | 2,120 | 2,190 | 1,820 | 2,450 | 1,720 | 2,000 | 2,180 | 2,360 | 2,820 | 2,910 |
6 | 1,600 | 2,160 | 1,520 | 1,760 | 1,920 | 2,080 | 2,480 | 2,560 | 1,980 | 2,670 | 1,880 | 2,170 | 2,370 | 2,570 | 3,060 | 3,160 |
8 | 1,600 | 2,160 | 1,520 | 1,760 | 1,920 | 2,080 | 2,480 | 2,560 | 1,980 | 2,670 | 1,880 | 2,170 | 2,370 | 2,570 | 3,060 | 3,160 |
10 | 1,670 | 2,250 | 1,580 | 1,830 | 2,000 | 2,170 | 2,580 | 2,670 | 2,050 | 2,760 | 1,940 | 2,250 | 2,460 | 2,660 | 3,170 | 3,280 |
12 | 1,820 | 2,450 | 1,720 | 2,000 | 2,180 | 2,360 | 2,820 | 2,910 | 2,200 | 2,970 | 2,090 | 2,420 | 2,640 | 2,860 | 3,410 | 3,520 |
16 | 2,280 | 3,070 | 2,160 | 2,500 | 2,730 | 2,960 | 3,530 | 3,640 | 2,660 | 3,590 | 2,520 | 2,920 | 3,190 | 3,450 | 4,120 | 4,250 |
20 | 3,040 | 4,100 | 2,880 | 3,340 | 3,640 | 3,950 | 4,710 | 4,860 | 3,500 | 4,720 | 3,320 | 3,850 | 4,200 | 4,550 | 5,420 | 5,600 |
Quantity | 1~19 | 20~34 | 35~49 | 50~99 |
Discount Rate | Unit Price | 5% | 10% | 18% |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
LPDMBA3-P[3.5-6/0.01]-B[2-10/0.1]-R[2-500/1]-L[3-6/1]-T[1-10/0.5] |
LPDMBA4-P[3.5-7/0.01]-B[2-10/0.1]-R[2-500/1]-L[4-8/1]-T[1-10/0.5] |
LPDMBA5-P[4-8/0.01]-B[2-10/0.1]-R[2-500/1]-L[5-10/1]-T[1-10/0.5] |
LPDMBA6-P[5-10/0.01]-B[2-12/0.1]-R[3-500/1]-L[10-12/1]-T[1-10/0.5] |
LPDMBA8-P[6-11/0.01]-B[2-15/0.1]-R[3-500/1]-L[14-16/1]-T[1-10/0.5] |
LPDMBA10-P[8-13/0.01]-B[3-20/0.1]-R[4-500/1]-L[14-20/1]-T[1-10/0.5] |
LPDMBA12-P[10-15/0.01]-B[3-20/0.1]-R[5-500/1]-L[14-24/1]-T[1-10/0.5] |
LPDMBA16-P[13-18/0.01]-B[5-20/0.1]-R[7-500/1]-L[16-32/1]-T[1-10/0.5] |
LPDMBA20-P[16-22/0.01]-B[5-20/0.1]-R[8-500/1]-L[20-40/1]-T[1-10/0.5] |
LPDMCA3-P[3.5-6/0.01]-B[2-10/0.1]-R[2-500/1]-L[3-6/1]-T[1-10/0.5] |
LPDMCA4-P[3.5-7/0.01]-B[2-10/0.1]-R[2-500/1]-L[4-8/1]-T[1-10/0.5] |
LPDMCA5-P[4-8/0.01]-B[2-10/0.1]-R[2-500/1]-L[5-10/1]-T[1-10/0.5] |
LPDMCA6-P[5-10/0.01]-B[2-12/0.1]-R[3-500/1]-L[10-12/1]-T[1-10/0.5] |
LPDMCA8-P[6-11/0.01]-B[2-15/0.1]-R[3-500/1]-L[14-16/1]-T[1-10/0.5] |
LPDMCA10-P[8-13/0.01]-B[3-20/0.1]-R[4-500/1]-L[14-20/1]-T[1-10/0.5] |
LPDMCA12-P[10-15/0.01]-B[3-20/0.1]-R[5-500/1]-L[14-24/1]-T[1-10/0.5] |
LPDMCA16-P[13-18/0.01]-B[5-20/0.1]-R[7-500/1]-L[16-32/1]-T[1-10/0.5] |
LPDMCA20-P[16-22/0.01]-B[5-20/0.1]-R[8-500/1]-L[20-40/1]-T[1-10/0.5] |
LPDMDA3-P[3.5-6/0.01]-B[2-10/0.1]-R[2-500/1]-L[3-6/1]-T[1-10/0.5] |
LPDMDA4-P[3.5-7/0.01]-B[2-10/0.1]-R[2-500/1]-L[4-8/1]-T[1-10/0.5] |
LPDMDA5-P[4-8/0.01]-B[2-10/0.1]-R[2-500/1]-L[5-10/1]-T[1-10/0.5] |
LPDMDA6-P[5-10/0.01]-B[2-12/0.1]-R[3-500/1]-L[10-12/1]-T[1-10/0.5] |
LPDMDA8-P[6-11/0.01]-B[2-15/0.1]-R[3-500/1]-L[14-16/1]-T[1-10/0.5] |
LPDMDA10-P[8-13/0.01]-B[3-20/0.1]-R[4-500/1]-L[14-20/1]-T[1-10/0.5] |
LPDMDA12-P[10-15/0.01]-B[3-20/0.1]-R[5-500/1]-L[14-24/1]-T[1-10/0.5] |
LPDMDA16-P[13-18/0.01]-B[5-20/0.1]-R[7-500/1]-L[16-32/1]-T[1-10/0.5] |
LPDMDA20-P[16-22/0.01]-B[5-20/0.1]-R[8-500/1]-L[20-40/1]-T[1-10/0.5] |
LPDMGA3-P[3.5-6/0.01]-B[2-10/0.1]-R[2-500/1]-L[3-6/1]-T[1-10/0.5] |
LPDMGA4-P[3.5-7/0.01]-B[2-10/0.1]-R[2-500/1]-L[4-8/1]-T[1-10/0.5] |
LPDMGA5-P[4-8/0.01]-B[2-10/0.1]-R[2-500/1]-L[5-10/1]-T[1-10/0.5] |
LPDMGA6-P[5-10/0.01]-B[2-12/0.1]-R[3-500/1]-L[10-12/1]-T[1-10/0.5] |
LPDMGA8-P[6-11/0.01]-B[2-15/0.1]-R[3-500/1]-L[14-16/1]-T[1-10/0.5] |
LPDMGA10-P[8-13/0.01]-B[3-20/0.1]-R[4-500/1]-L[14-20/1]-T[1-10/0.5] |
LPDMGA12-P[10-15/0.01]-B[3-20/0.1]-R[5-500/1]-L[14-24/1]-T[1-10/0.5] |
LPDMGA16-P[13-18/0.01]-B[5-20/0.1]-R[7-500/1]-L[16-32/1]-T[1-10/0.5] |
LPDMGA20-P[16-22/0.01]-B[5-20/0.1]-R[8-500/1]-L[20-40/1]-T[1-10/0.5] |
LPDMJA3-P[3.5-6/0.01]-B[2-10/0.1]-R[2-500/1]-L[3-6/1]-T[1-10/0.5] |
LPDMJA4-P[3.5-7/0.01]-B[2-10/0.1]-R[2-500/1]-L[4-8/1]-T[1-10/0.5] |
LPDMJA5-P[4-8/0.01]-B[2-10/0.1]-R[2-500/1]-L[5-10/1]-T[1-10/0.5] |
LPDMJA6-P[5-10/0.01]-B[2-12/0.1]-R[3-500/1]-L[10-12/1]-T[1-10/0.5] |
LPDMJA8-P[6-11/0.01]-B[2-15/0.1]-R[3-500/1]-L[14-16/1]-T[1-10/0.5] |
LPDMJA10-P[8-13/0.01]-B[3-20/0.1]-R[4-500/1]-L[14-20/1]-T[1-10/0.5] |
LPDMJA12-P[10-15/0.01]-B[3-20/0.1]-R[5-500/1]-L[14-24/1]-T[1-10/0.5] |
LPDMJA16-P[13-18/0.01]-B[5-20/0.1]-R[7-500/1]-L[16-32/1]-T[1-10/0.5] |
LPDMJA20-P[16-22/0.01]-B[5-20/0.1]-R[8-500/1]-L[20-40/1]-T[1-10/0.5] |
LPDMRA3-P[3.5-6/0.01]-B[2-10/0.1]-R[2-500/1]-L[3-6/1]-T[1-10/0.5] |
LPDMRA4-P[3.5-7/0.01]-B[2-10/0.1]-R[2-500/1]-L[4-8/1]-T[1-10/0.5] |
LPDMRA5-P[4-8/0.01]-B[2-10/0.1]-R[2-500/1]-L[5-10/1]-T[1-10/0.5] |
LPDMRA6-P[5-10/0.01]-B[2-12/0.1]-R[3-500/1]-L[10-12/1]-T[1-10/0.5] |
LPDMRA8-P[6-11/0.01]-B[2-15/0.1]-R[3-500/1]-L[14-16/1]-T[1-10/0.5] |
LPDMRA10-P[8-13/0.01]-B[3-20/0.1]-R[4-500/1]-L[14-20/1]-T[1-10/0.5] |
LPDMRA12-P[10-15/0.01]-B[3-20/0.1]-R[5-500/1]-L[14-24/1]-T[1-10/0.5] |
LPDMRA16-P[13-18/0.01]-B[5-20/0.1]-R[7-500/1]-L[16-32/1]-T[1-10/0.5] |
LPDMRA20-P[16-22/0.01]-B[5-20/0.1]-R[8-500/1]-L[20-40/1]-T[1-10/0.5] |
LPDMSA3-P[3.5-6/0.01]-B[2-10/0.1]-R[2-500/1]-L[3-6/1]-T[1-10/0.5] |
LPDMSA4-P[3.5-7/0.01]-B[2-10/0.1]-R[2-500/1]-L[4-8/1]-T[1-10/0.5] |
LPDMSA5-P[4-8/0.01]-B[2-10/0.1]-R[2-500/1]-L[5-10/1]-T[1-10/0.5] |
LPDMSA6-P[5-10/0.01]-B[2-12/0.1]-R[3-500/1]-L[10-12/1]-T[1-10/0.5] |
LPDMSA8-P[6-11/0.01]-B[2-15/0.1]-R[3-500/1]-L[14-16/1]-T[1-10/0.5] |
LPDMSA10-P[8-13/0.01]-B[3-20/0.1]-R[4-500/1]-L[14-20/1]-T[1-10/0.5] |
Loading...
Product Name | Feature | Catalog |
---|---|---|
Small Diameter Locating Pins | Locating Pins with Ø4 or less diameter suitable for small works. | Click here |
Locating Pins for Height Adjusting | Locating Pins with short head for thin PC boards. | Click here |
Nonmagnetic Locating Pins | Nonmagnetic Aluminum locating pins suitable for environments where magnetism must be avoided. | Click here |
Plastic Locating Pins | Plastic Locating Pins prevent work damages. | Click here |
Height Adjusting Pins | Locating Pins suitable for locating in vertical direction. | Click here |
Support Pins | Pins for use in higher position to avoid interferences. | Click here |
Basic Shape | With Shoulder | Drive | No | Tolerance of Positioning Side Outer Diameter | 0/-0.01 |
---|
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy