(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Square End Mills (HSS)（Page2）
| Days to Ship |
|
|---|
-
High-Speed Steel Square End Mill, 4-Flute, Short/Non-Coated Model
MISUMI
40° helix that's stronger than the 2-blade type is ideal for side milling
- Volume Discount
- Non-Coated
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 4-Flute, Regular/Non-Coated Model
MISUMI
40° helix that's stronger than the 2-blade type is ideal for side milling
- Volume Discount
- Non-Coated
- 4 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
High-Speed Steel Corner C End Mill, 2-Flute/Short Model
MISUMI
End mill series with the C surface that can be selected in 0.1 mm increments
- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 10 Days or more -
High-Speed Steel Corner C End Mill, 2-Flute/Regular Model
MISUMI
End mill series with the C surface that can be selected in 0.1 mm increments
- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 10 Days or more -
High-Speed Steel Corner C End Mill, 4-Flute/Short Model
MISUMI
End mill series with the C surface that can be selected in 0.1 mm increments
- Non-Coated
- 4 Flutes
- S (Short)
Days to Ship: 10 Days or more -
High-Speed Steel Corner C End Mill, 4-Flute/Regular Model
MISUMI
End mill series with the C surface that can be selected in 0.1 mm increments
- Non-Coated
- 4 Flutes
- R (Regular)
Days to Ship: 10 Days or more -
High-Speed Steel Blade Relief End Mill, 2-Flute/Short Model
MISUMI
A blade relief type end mill that's not affected by the interference of tools
- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 10 Days or more -
High-Speed Steel Blade Relief End Mill, 2-Flute/Regular Model
MISUMI
A blade relief type end mill that's not affected by the interference of tools
- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 10 Days or more -
High-Speed Steel Blade Relief End Mill, 4-Flute/Short Model
MISUMI
A blade relief type end mill that's not affected by the interference of tools
- Non-Coated
- 4 Flutes
- S (Short)
Days to Ship: 10 Days or more -
High-Speed Steel Blade Relief End Mill, 4-Flute/Regular Model
MISUMI
A blade relief type end mill that's not affected by the interference of tools
- Non-Coated
- 4 Flutes
- R (Regular)
Days to Ship: 10 Days or more -
Nachi-Fujikoshi
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
G Standard End Mill, 4-Flute 4GE
Nachi-Fujikoshi
It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum. Suitable for side surface machining.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
G Long End Mill, 2-Flute SL2GE
Nachi-Fujikoshi
Capable of machining from steel and stainless steel to aluminum. Suitable for grooving deep grooves or in deep locations.
- Volume Discount
Days to Ship: 8 Days or more -
SG-FAX End Mill, Long, 2-Flute SL2SGE
Nachi-Fujikoshi
General purpose coated end mill.
[Features]
· Capable of machining from steel and stainless steel to aluminum.
· Suitable for grooving deep grooves or in deep locations.- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
A general-purpose end mill that can process anything from steel to stainless steel and aluminum.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Nachi-Fujikoshi
A general-purpose end mill that can process anything from steel to stainless steel and aluminum. Suitable for side surface machining.
- Volume Discount
Days to Ship: 8 Days or more -
Super Hard, Regular Shank, Long 4-Flute RSL4SE
Nachi-Fujikoshi
General purpose end mill. Suitable for side processing of wide side surfaces and deep positions.
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum. Suitable for side surface machining.
- Volume Discount
Days to Ship: 8 Days or more -
SG-FAX Medium End Mill, 2-Flute 2MSGE
Nachi-Fujikoshi
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.
- Volume Discount
Days to Ship: 8 Days or more -
Super Hard, Regular Shank, 4-Flute 4RSE
Nachi-Fujikoshi
General purpose end mill. Suitable for side surface machining.
- Volume Discount
Days to Ship: 8 Days or more -
Super Hard, Regular Shank, Long 2-Flute RSL2SE
Nachi-Fujikoshi
General purpose end mill. Suitable for grooving deep grooves or in deep locations.
- Volume Discount
Days to Ship: 8 Days or more -
Super Hard, Long 4-Flute SL4SE
Nachi-Fujikoshi
General purpose end mill. Suitable for side processing of wide side surfaces and deep positions.
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
A general-purpose end mill that can process anything from steel to stainless steel and aluminum.
- Volume Discount
Days to Ship: 8 Days or more -
AG Mill, 2-Flute Mill, Medium 2AGEM
Nachi-Fujikoshi
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
Suitable for side processing of wide side surfaces and deep positions.
- Volume Discount
Days to Ship: 8 Days or more -
G Standard End Mill, 2-Flute 2GE
Nachi-Fujikoshi
[Features]
· It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum.
· It is suitable for side processing- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Days to Ship: 8 Days or more -
G Long End Mill, 4-Flute SL4GE
Nachi-Fujikoshi
General purpose coated end mill. Suitable for side processing of wide side surfaces and deep positions.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Days to Ship: 8 Days or more -
OSG
For Key Groove (OH1)
For complete product overview and details on For 2-Flute Keyway EKD (OH1) see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
For 2-Flute Keyway EX-TIN-EKD (OH1)
OSG
For Key Groove (OH1)
For complete product overview and details on For 2-Flute Keyway EX-TIN-EKD (OH1) see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Days to Ship: 8 Days or more -
2-Flute, General-Purpose, Medium Type EDN
OSG
HSS square series.
For complete product overview and details on 2-Flute, General-Purpose, Medium Type EDN see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
2-Flute Medium Type EX-TIN-EDN
OSG
HSS square series.
For complete product overview and details on 2-Flute Medium Type EX-TIN-EDN see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Days to Ship: 8 Days or more -
OSG
TiN coating, 30° torsion.
For complete product overview and details on 2-Flute Long Type EX-TIN-EDL see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
End Mill (3-Flute General Purpose Short Type) ETS
OSG
HSS square series.
For complete product overview and details on End Mill (3-Flute General Purpose Short Type) ETS see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Days to Ship: 8 Days or more -
End Mill (Multi-Flute Long Shank Short Type) LS-EMS
OSG
HSS square series.
For complete product overview and details on End Mill (Multi-Flute Long Shank Short Type) LS-EMS see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
End Mill (Multi-Flute Long Shank Long Type) LS-EML
OSG
A cobalt high-speed steel 4-flute long type end mill.
- Volume Discount
Days to Ship: 8 Days or more -
OSG
30° threaded cobalt HSS square end mill with TiN coating.
- Volume Discount
Days to Ship: 8 Days or more -
V Coating XPM End Mill (for 2-Blade Key Groove) V-XPM-EKD(OH1)
OSG
Powder HSS XPM key grooving end mill with V-coating
- Volume Discount
Days to Ship: 8 Days or more -
V Coating XPM End Mill (2-Flute Short Type) V-XPM-EDS
OSG
Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.
- Volume Discount
Days to Ship: 8 Days or more -
XPM End Mill (2-Flute Short Type) XPM-EDS
OSG
2-flute short blade series in which powder HSS XPM is used as the base material
- Volume Discount
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Flute Diameter (D)(φ) |
| Flute Length (ℓ)(mm) |
| Work Material |
| Flute Shape Type |
| Number of Flutes(sheet) |
| Tool Material Type |
| Processing Applications |
| Link Diameter (d)(mm) |
| Coating |
| Overall Length (L)(mm) |
| Helix Angle (θ) |
| Base-Blade Availability |
| Length Under Neck (ℓ1)(mm) |
| Link |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | High-Speed Steel Square End Mill, 4-Flute, Short/Non-Coated Model | High-Speed Steel Square End Mill, 4-Flute, Regular/Non-Coated Model | High-Speed Steel Blade Relief End Mill, 2-Flute/Regular Model | High-Speed Steel Blade Relief End Mill, 4-Flute/Regular Model | V Coating XPM End Mill (for 2-Blade Key Groove) V-XPM-EKD(OH1) | ||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||
| Flute Diameter (D)(φ) | 3 ～ 40 | 3 ～ 30 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 8 ～ 25 | 8 ～ 25 | 8 ～ 25 | 8 ～ 25 | 1 ～ 50 | 2.5 ～ 50 | 3 ～ 40 | 3 ～ 30 | 1 ～ 50 | 1 ～ 50 | 2.5 ～ 50 | 4 ～ 18 | 2.5 ～ 50 | 2 ～ 30 | 4 ～ 18 | 4 ～ 18 | 3 ～ 40 | 3.3 ～ 11.3 | 1.5 ～ 20 | 3 ～ 40 | 1 ～ 50 | 3 ～ 40 | 3 ～ 40 | 3 ～ 40 | 3 ～ 25 | 3 ～ 25 | 0.8 ～ 50 | 1 ～ 20 | 1 ～ 20 | 10 ～ 40 | 1 ～ 40 | 1 ～ 30 | 2.5 ～ 40 | 10 ～ 50 | 10 ～ 40 | 3 ～ 40 | 3 ～ 12 | 1 ～ 40 | 0.8 ～ 40 |
| Flute Length (ℓ)(mm) | 8 ～ 65 | 12 ～ 68 | 8 ～ 50 | 10 ～ 60 | 8 ～ 45 | 12 ～ 68 | - | - | - | - | 2 ～ 70 | 7 ～ 70 | 15 ～ 125 | 15 ～ 90 | 2 ～ 70 | 2 ～ 70 | 7 ～ 70 | 20 ～ 65 | 7 ～ 70 | 7 ～ 60 | 12 ～ 40 | 20 ～ 65 | 15 ～ 125 | 7 ～ 22 | 3 ～ 45 | 15 ～ 125 | 2 ～ 70 | 6 ～ 65 | 15 ～ 125 | 30 ～ 150 | 5 ～ 25 | 5 ～ 25 | 1.6 ～ 75 | 3.5 ～ 45 | 3.5 ～ 45 | 25 ～ 65 | 6 ～ 110 | 2.5 ～ 55 | 10 ～ 65 | 25 ～ 75 | 45 ～ 110 | 15 ～ 110 | 5 ～ 15 | 2.5 ～ 65 | 2 ～ 65 |
| Work Material | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
| Flute Shape Type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
| Number of Flutes(sheet) | 4 | 4 | 2 | 2 | 4 | 4 | 2 | 2 | 4 | 4 | 2 | 4 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 4 | 2 | 4 | 2 | 2 | 4 | 2 | 3 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 4 | 4 | 4 | 4 | 2 | 2 | 2 |
| Tool Material Type | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Alloy High-Speed Steel | Alloy High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Alloy High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel |
| Processing Applications | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting |
| Link Diameter (d)(mm) | 6 ～ 32 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 10 ～ 25 | 10 ～ 25 | 10 ～ 25 | 10 ～ 25 | 6 ～ 42 | 6 ～ 42 | 6 ～ 32 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 16 | 6 ～ 42 | 6 ～ 25 | 6 ～ 16 | 6 ～ 16 | 6 ～ 32 | 6 ～ 12 | 6 ～ 20 | 6 ～ 32 | 6 ～ 42 | 6 ～ 32 | 6 ～ 32 | 6 ～ 32 | 6 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 20 | 6 ～ 20 | 10 ～ 32 | 6 ～ 32 | 6 ～ 25 | 6 ～ 32 | 10 ～ 42 | 10 ～ 32 | 6 ～ 32 | 6 ～ 12 | 6 ～ 32 | 6 ～ 32 |
| Coating | Non-Coated | Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | AG | TiN | TiN | TiCN | TiCN | Non-Coated | Non-Coated | Non-Coated | AG | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN | AG | TiN | TiN | TiN | Non-Coated | Non-Coated | TiN | TiN | Non-Coated | TiN | Non-Coated | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | - | - | Non-Coated |
| Overall Length (L)(mm) | 52 ～ 150 | 55 ～ 144 | 50 ～ 120 | 50 ～ 130 | 52 ～ 121 | 55 ～ 144 | 60 ～ 120 | 60 ～ 130 | 69 ～ 121 | 78 ～ 144 | 50 ～ 160 | 50 ～ 160 | 60 ～ 210 | 65 ～ 180 | 50 ～ 160 | 50 ～ 160 | 50 ～ 160 | 55 ～ 120 | 50 ～ 160 | 50 ～ 135 | 45 ～ 95 | 55 ～ 120 | 60 ～ 210 | 50 ～ 80 | 50 ～ 110 | 60 ～ 210 | 50 ～ 160 | 50 ～ 150 | 60 ～ 210 | 70 ～ 235 | 50 ～ 95 | 50 ～ 95 | 45 ～ 165 | 45 ～ 110 | 45 ～ 110 | 125 ～ 235 | 50 ～ 195 | 45 ～ 125 | 50 ～ 150 | 125 ～ 340 | 125 ～ 285 | 60 ～ 195 | 50 ～ 70 | 50 ～ 165 | 50 ～ 165 |
| Helix Angle (θ) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) |
| Base-Blade Availability | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Length Under Neck (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Link | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Metric / Inch
-
Flute Diameter (D)(φ)
-
0.45～0.9
- 0.45
- 0.8
- 0.9
-
1～1.9
- 1
- 1/2
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
[2.7-2.99/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-14.99/0.01φ Unit(s)][15.01-16/0.01φ Unit(s)][17-18.99/0.01φ Unit(s)][19.01-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]
-
-
Flute Length (ℓ)(mm)
-
Work Material
-
Flute Shape Type
-
Number of Flutes(sheet)
-
Tool Material Type
-
Processing Applications
-
Link Diameter (d)(mm)
-
Coating
-
Overall Length (L)(mm)
-
Helix Angle (θ)
-
Base-Blade Availability
-
Length Under Neck (ℓ1)(mm)
-
Link
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy