(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Square End Mills (HSS)
| Days to Ship |
|
|---|
-
Special Long Shank End Mill, 4-Flute
FUKUDA
The shank has been made especially long for deep engraving. Designed with a thin shank.
- Volume Discount
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 4-Flute, Regular/Non-Coated Model
MISUMI
40° helix that's stronger than the 2-blade type is ideal for side milling
- Volume Discount
- Non-Coated
- 4 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
Days to Ship: 8 Days or more -
FUKUDA
Long Shank for Deep Engraving
For complete product overview and details on Long Shank End Mill 2 Blades see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
V Coating XPM End Mill (4-Flute Short Type) V-XPM-EMS
OSG
Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
A general-purpose end mill that can process anything from steel to stainless steel and aluminum.
- Volume Discount
Days to Ship: 8 Days or more -
2-Flute, General-Purpose, Short Type EDS
OSG
HSS square series.
For complete product overview and details on 2-Flute, General-Purpose, Short Type EDS see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
CPM End Mill (2-Flute Straight Blade for Forming Work, Medium Type) CPM-STDN
OSG
Straight blade end mill for forming.
- Volume Discount
Days to Ship: 8 Days or more -
V Coating XPM End Mill (2-Flute Medium Type) V-XPM-EDN
OSG
Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.
- Volume Discount
Days to Ship: 8 Days or more -
XPM End Mill (2-Flute Long Type) XPM-EDL
OSG
2-flute long blade series in which powder HSS XPM is used as the base material
- Volume Discount
Days to Ship: 8 Days or more -
TiN Coating, End Mill (Multi-Flute Short Type) EX-TIN-EMS
OSG
[Features]
· Adopts TiN coating with excellent weld resistance and abrasion resistance.
· Those with outer diameter of 41 mm or more have center holes.- Volume Discount
Days to Ship: 8 Days or more -
3S End Mill, 2-Flute (Standard Blade)
FUKUDA
Wide range of blade lengths and an abundance of sizes
- Volume Discount
Days to Ship: 8 Days or more -
3S End Mill, 4-Flute Long Blade
FUKUDA
Long blade for cutting such as deep grooving and wide widths Repolishing is easy
- Volume Discount
Days to Ship: 8 Days or more -
3S End Mill, 4-Flute Extra Long Blade
FUKUDA
Long blade for cutting such as deep grooving and wide widths Repolishing is easy
- Volume Discount
Days to Ship: 8 Days or more -
S&K
A 4-flute end mill for finish machining. The outer diameter tolerance is positive.
- Volume Discount
Days to Ship: 6 Days or more -
EIKOSHA
Square end mill (HSS) with C-surfaces on the blade corners.
[Features]
· An end mill with 45° C-face on the corners.
· Machinability is also improved thanks to adoption of twisted blade.
[Applications]
· End mill for processing chamfered surfaces, etc. to reinforce corners of the processed workpiece.- Volume Discount
Days to Ship: 8 Days or more -
AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short
MISUMI
AS coating with the film hardness and heat resistance that withstand a various applications
- Volume Discount
- AS
- 2 Flutes
- S (Short)
Days to Ship: 8 Days or more -
AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular
MISUMI
AS coating with the film hardness and heat resistance that withstand a various applications
- Volume Discount
- AS
- 2 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long
MISUMI
AS coating with the film hardness and heat resistance that withstand a various applications
- Volume Discount
- AS
- 2 Flutes
- L (Long)
Days to Ship: 8 Days or more -
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short
MISUMI
AS coating with excellent wear resistance achieves the high-precision finish even in prolonged processing
- Volume Discount
- AS
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more -
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular
MISUMI
The strong helix of positive blade is ideal in the standing-wall finishing of raw materials
- Volume Discount
- AS
- 4 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long
MISUMI
High durability is achieved for a wide range of materials from raw materials to heat-treated steel
- Volume Discount
- AS
- 4 Flutes
- L (Long)
Days to Ship: 8 Days or more -
TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short
MISUMI
Powdered HSS with high durability is available more cheaply than the cobalt HSS market price
- Volume Discount
- TiCN
- 2 Flutes
- S (Short)
Days to Ship: 8 Days or more -
TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular
MISUMI
Amazing unbeatable prices
For complete product overview and details on TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular see the sections below:- Volume Discount
- TiCN
- 2 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long
MISUMI
Amazing unbeatable prices [C-Value]
- Volume Discount
- TiCN
- 2 Flutes
- L (Long)
Days to Ship: 8 Days or more -
TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short
MISUMI
Powdered HSS with high durability is available more cheaply than the cobalt HSS market price [C-Value]
- Volume Discount
- TiCN
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more -
TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular
MISUMI
Amazing unbeatable prices [C-Value]
- Volume Discount
- TiCN
- 4 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute/Regular
MISUMI
Amazing unbeatable prices [C-Value]
- Volume Discount
- TiCN
- 4 Flutes
- L (Long)
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Square End Mill, 2-Flute, Short
MISUMI
AS coating that provides improved processing efficiency in high-speed steel end mill
- Volume Discount
- AS
- 2 Flutes
- S (Short)
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Square End Mill, 2-Flute/Regular
MISUMI
AS coating that provides improved processing efficiency in high-speed steel end mill
- Volume Discount
- AS
- 2 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Square End Mill, 2-Flute/Long
MISUMI
AS coating that provides improved processing efficiency in high-speed steel end mill
- Volume Discount
- AS
- 2 Flutes
- L (Long)
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Square End Mill, 4-Flute/Short
MISUMI
The durability has been remarkably improved with the superior heat resistance and film hardness of the AS coating over conventional products
- Volume Discount
- AS
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Square End Mill, 4-Flute/Regular
MISUMI
The durability has been remarkably improved with the superior heat resistance and film hardness of the AS coating over conventional products
- Volume Discount
- AS
- 4 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Square End Mill, 4-Flute/Long
MISUMI
The durability has been remarkably improved with the superior heat resistance and film hardness of the AS coating over conventional products
- Volume Discount
- AS
- 4 Flutes
- L (Long)
Days to Ship: 8 Days or more -
Powdered High-Speed Steel Square End Mill, 2-Flute, Short/Non-Coated Model
MISUMI
A lineup of powdered high speed steel non-coated type from short to long
- Volume Discount
- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 8 Days or more -
Powdered High-Speed Steel Square End Mill, 2-Flute/Regular/Non-Coated Model
MISUMI
A lineup of powdered high speed steel non-coated type from short to long
- Volume Discount
- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
Powdered High-Speed Steel Square End Mill, 2-Flute, Long/Non-Coated Model
MISUMI
A lineup of powdered high speed steel non-coated type from short to long
- Volume Discount
- Non-Coated
- 2 Flutes
- L (Long)
Days to Ship: 8 Days or more -
Powdered High-Speed Steel Square End Mill, 4-Flute/Short/Non-Coated Model
MISUMI
Powdered high-speed steel and non-coated 4-blade series
- Volume Discount
- Non-Coated
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more -
Powdered High-Speed Steel Square End Mill, 4-Flute/Regular/Non-Coated Model
MISUMI
Powdered high-speed steel and non-coated 4-blade series
- Volume Discount
- Non-Coated
- 4 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
Powdered High-Speed Steel Square End Mill, 4-Flute/Regular/Non-Coated Model, Long
MISUMI
Powdered high-speed steel and non-coated 4-blade series
- Volume Discount
- Non-Coated
- 4 Flutes
- L (Long)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 2-Flute/Short/Non-Coated Model
MISUMI
The non-coated 2-blade type is available from φ1 up to φ50
- Volume Discount
- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 2-Flute/Regular/Non-Coated Model
MISUMI
The non-coated 2-blade type is available from φ1 up to φ50
- Volume Discount
- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 2-Flute/Long/Non-Coated Model
MISUMI
The non-coated 2-blade type is available from φ1 up to φ50
- Volume Discount
- Non-Coated
- 2 Flutes
- L (Long)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 4-Flute, Short/Non-Coated Model
MISUMI
40° helix that's stronger than the 2-blade type is ideal for side milling
- Volume Discount
- Non-Coated
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Flute Diameter (D)(φ) |
| Flute Length (ℓ)(mm) |
| Work Material |
| Flute Shape Type |
| Number of Flutes(sheet) |
| Tool Material Type |
| Processing Applications |
| Link Diameter (d)(mm) |
| Coating |
| Overall Length (L)(mm) |
| Helix Angle (θ) |
| Base-Blade Availability |
| Length Under Neck (ℓ1)(mm) |
| Link |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | FUKUDA | MISUMI | OSG | FUKUDA | OSG | Nachi-Fujikoshi | Nachi-Fujikoshi | OSG | OSG | OSG | OSG | OSG | FUKUDA | FUKUDA | FUKUDA | S&K | EIKOSHA | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | High-Speed Steel Square End Mill, 4-Flute, Regular/Non-Coated Model | CPM End Mill (2-Flute Straight Blade for Forming Work, Medium Type) CPM-STDN | AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short | AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular | AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long | AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short | AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular | AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long | TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short | TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular | TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long | TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short | TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular | TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute/Regular | Powdered High-Speed Steel Square End Mill, 2-Flute, Short/Non-Coated Model | Powdered High-Speed Steel Square End Mill, 2-Flute/Regular/Non-Coated Model | Powdered High-Speed Steel Square End Mill, 2-Flute, Long/Non-Coated Model | Powdered High-Speed Steel Square End Mill, 4-Flute/Short/Non-Coated Model | Powdered High-Speed Steel Square End Mill, 4-Flute/Regular/Non-Coated Model | Powdered High-Speed Steel Square End Mill, 4-Flute/Regular/Non-Coated Model, Long | High-Speed Steel Square End Mill, 2-Flute/Short/Non-Coated Model | High-Speed Steel Square End Mill, 2-Flute/Regular/Non-Coated Model | High-Speed Steel Square End Mill, 2-Flute/Long/Non-Coated Model | High-Speed Steel Square End Mill, 4-Flute, Short/Non-Coated Model | |||||||||||||||||||||
| Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 6 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||
| Flute Diameter (D)(φ) | 8 ～ 50 | 3 ～ 30 | 0.8 ～ 50 | 3 ～ 50 | 2.5 ～ 40 | 2 ～ 30 | 3.3 ～ 11.3 | 0.45 ～ 60 | 1.5 ～ 20 | 1 ～ 20 | 3 ～ 40 | 2.5 ～ 50 | 0.8 ～ 100 | 3 ～ 50 | 3 ～ 60 | 3 ～ 40 | 3 ～ 16 | 1 ～ 40 | 1 ～ 25 | 3 ～ 20 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 1 ～ 40 | 1 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 1 ～ 50 | 1 ～ 25 | 3 ～ 40 | 3 ～ 40 | 3 ～ 30 | 3 ～ 40 | 1 ～ 40 | 1 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 1 ～ 50 | 1 ～ 25 | 3 ～ 40 | 3 ～ 40 |
| Flute Length (ℓ)(mm) | 20 ～ 75 | 12 ～ 68 | 1.6 ～ 75 | 30 ～ 120 | 10 ～ 65 | 4 ～ 55 | 7 ～ 22 | 1.1 ～ 80 | 5 ～ 45 | 3.5 ～ 45 | 15 ～ 110 | 7 ～ 75 | 2 ～ 80 | 20 ～ 125 | 30 ～ 300 | 10 ～ 65 | 8 ～ 32 | 2.5 ～ 65 | 3.5 ～ 60 | 15 ～ 75 | 8 ～ 45 | 12 ～ 68 | 15 ～ 90 | 2.5 ～ 65 | 3.5 ～ 60 | 15 ～ 90 | 8 ～ 45 | 12 ～ 68 | 15 ～ 90 | 2.5 ～ 75 | 3.5 ～ 60 | 15 ～ 110 | 8 ～ 65 | 12 ～ 68 | 15 ～ 110 | 2.5 ～ 65 | 3.5 ～ 60 | 15 ～ 90 | 8 ～ 45 | 12 ～ 68 | 15 ～ 90 | 2.5 ～ 75 | 3.5 ～ 60 | 15 ～ 110 | 8 ～ 65 |
| Work Material | Cast Iron[○] / Aluminum[○] / Resin[○] / Others[○] / Others 2[○] / Others 3[○] / Others 4[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Others[○] / Others 2[○] / Others 3[○] / Others 4[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Others[○] / Others 2[○] / Others 3[○] / Others 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Others[○] / Others 2[○] / Others 3[○] / Others 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Others[○] / Others 2[○] / Others 3[○] / Others 4[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
| Flute Shape Type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | For Key Grooves | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
| Number of Flutes(sheet) | 4 | 4 | 2 | 2 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 4 ～ 6 | 2 | 4 | 4 | 4 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 2 | 2 | 4 |
| Tool Material Type | Alloy High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Alloy High-Speed Steel | Powdered High-Speed Steel | Alloy High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Cobalt High-Speed Steel | Alloy High-Speed Steel | Alloy High-Speed Steel | Alloy High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel |
| Processing Applications | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk |
| Link Diameter (d)(mm) | 6 ～ 42 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 6 ～ 32 | 6 ～ 25 | 6 ～ 12 | 6 ～ 42 | 6 ～ 20 | 6 ～ 20 | 6 ～ 32 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 32 | 6 ～ 16 | 6 ～ 32 | 6 ～ 25 | 6 ～ 20 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 32 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 25 | 6 ～ 32 | 6 ～ 32 | 6 ～ 25 | 6 ～ 32 | 6 ～ 32 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 25 | 6 ～ 32 | 6 ～ 32 |
| Coating | Non-Coated | Non-Coated | TiN | Non-Coated | - | TiCN | Non-Coated | Non-Coated | Non-Coated | - | Non-Coated | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
| Overall Length (L)(mm) | 100 ～ 350 | 55 ～ 144 | 45 ～ 165 | 100 ～ 300 | 55 ～ 165 | 50 ～ 135 | 50 ～ 80 | 45 ～ 170 | 45 ～ 110 | 55 ～ 125 | 65 ～ 210 | 50 ～ 165 | 42 ～ 180 | 58 ～ 220 | 70 ～ 400 | 50 ～ 150 | 45 ～ 100 | 45 ～ 150 | 45 ～ 130 | 60 ～ 140 | 52 ～ 121 | 55 ～ 144 | 60 ～ 160 | 45 ～ 150 | 45 ～ 130 | 60 ～ 160 | 52 ～ 121 | 55 ～ 144 | 60 ～ 160 | 45 ～ 165 | 45 ～ 130 | 60 ～ 195 | 52 ～ 150 | 55 ～ 144 | 60 ～ 195 | 45 ～ 150 | 45 ～ 130 | 60 ～ 160 | 52 ～ 121 | 55 ～ 144 | 60 ～ 160 | 45 ～ 165 | 45 ～ 130 | 60 ～ 195 | 52 ～ 150 |
| Helix Angle (θ) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Without Torsion | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) |
| Base-Blade Availability | Included | Included | - | Included | - | - | - | - | - | - | - | - | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included |
| Length Under Neck (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Link | - | - | Straight | - | Straight | - | - | Straight | Straight | Straight | Straight | Straight | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Metric / Inch
-
Flute Diameter (D)(φ)
-
0.45～0.9
- 0.45
- 0.8
- 0.9
-
1～1.9
- 1
- 1/2
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
[2.7-2.99/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-14.99/0.01φ Unit(s)][15.01-16/0.01φ Unit(s)][17-18.99/0.01φ Unit(s)][19.01-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]
-
-
Flute Length (ℓ)(mm)
-
Work Material
-
Flute Shape Type
-
Number of Flutes(sheet)
-
Tool Material Type
-
Processing Applications
-
Link Diameter (d)(mm)
-
Coating
-
Overall Length (L)(mm)
-
Helix Angle (θ)
-
Base-Blade Availability
-
Length Under Neck (ℓ1)(mm)
-
Link
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy