(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
High-speed steel roughing end mill that achieves both the machining performance and low price
Part Number
Configured Part Number is shown.
AS-RFEMS28
Part Number |
---|
AS-RFEMS28 |
Loading...
Model Number
AS-RFEMS
Outer Diameter D |
Shank Diameter d |
Shank Diameter d |
Flute Length ℓ |
Overall Length L |
Under Neck Angle θ |
Corner Chamfering C |
Number of Flutes Z |
5 | — | 6 | 13 | 57 | 15° | — | 3 |
6 | — | 6 | 13 | 57 | — | — | 3 |
7 | — | 10 | 16 | 66 | 15° | — | 3 |
8 | — | 10 | 19 | 69 | 15° | — | 4 |
9 | — | 10 | 19 | 69 | 15° | — | 4 |
10 |
8 |
8 | 22 | 72 | — | — | 4 |
10 | — | 10 | 22 | 72 | — | — | 4 |
11 | — | 12 | 22 | 79 | 15° | — | 4 |
12 |
10 |
10 | 26 | 83 | — | 0.2 ~ 0.7 | 4 |
12 | — | 12 | 26 | 83 | — | 0.2 ~ 0.7 | 4 |
13 | — | 12 | 26 | 83 | — | 0.2 ~ 0.7 | 4 |
14 | — | 12 | 26 | 83 | — | 0.2 ~ 0.7 | 4 |
15 | — | 12 | 26 | 83 | — | 0.2 ~ 0.7 | 4 |
16 |
12 |
12 | 32 | 92 | — | 0.3 ~ 0.9 | 4 |
16 | — | 16 | 32 | 92 | — | 0.3 ~ 0.9 | 4 |
17 | — | 16 | 32 | 92 | — | 0.3 ~ 0.9 | 4 |
18 | — | 16 | 32 | 92 | — | 0.3 ~ 0.9 | 4 |
19 | — | 16 | 32 | 92 | — | 0.3 ~ 0.9 | 4 |
20 | 16 | 16 | 38 | 104 | — | 0.3 ~ 0.9 | 4 |
20 | — | 20 | 38 | 104 | — | 0.3 ~ 0.9 | 4 |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a blade diameter (D) and shank diameter (d).
Flute Diameter D |
Shank Diameter d |
Shank Diameter d |
Blade Length ℓ |
Overall Length L |
Under Neck Angle θ |
Corner Chamfering C |
Number of Flutes Z |
22 | — | 20 | 38 | 104 | — | 0.3 ~ 0.9 | 4 |
25 |
20 |
20 | 45 | 121 | — | 0.3 ~ 0.9 | 4 |
25 | — | 25 | 45 | 121 | — | 0.3 ~ 0.9 | 4 |
28 | — | 25 | 45 | 121 | — | 0.3 ~ 0.9 | 5 |
30 | — | 25 | 45 | 121 | — | 0.3 ~ 0.9 | 5 |
32 | — | 32 | 53 | 133 | — | 0.3 ~ 0.9 | 6 |
35 | — | 32 | 53 | 133 | — | 0.3 ~ 0.9 | 6 |
40 | — | 32 | 63 | 143 | — | 0.3 ~ 0.9 | 6 |
45 | — | 42 | 63 | 143 | — | 0.3 ~ 0.9 | 6 |
50 | — | 42 | 75 | 177 | — | 0.3 ~ 0.9 | 6 |
For Cutting Conditions, Refer to >>Click here.
Work Material | General Steel / Heat-Treated Steel / Cast Iron / Aluminum / Copper | Type of Flute | Roughing | Tool Material Type | Cobalt High-Speed Steel |
---|---|---|---|---|---|
Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Helix Angle (θ) | Standard Helix (30 to 40°) |
Base-Blade Availability | Included |
Please check the type/dimensions/specifications of the part AS-RFEMS28 in the AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut series.
Part Number |
---|
AS-RFEMS12 |
AS-RFEMS12-10 |
AS-RFEMS13 |
AS-RFEMS30 |
AS-RFEMS32 |
AS-RFEMS35 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy