(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Small Head Locating Pins - Round head with tapered tip and straight shank, configurable P/L/B/E dimensions.
- Spec Change
Has the head newly shaped (No Edge). Such reshaping prevents the located object from being damaged. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
- inCAD Components
Part Number
Configured Part Number is shown.
Specifications
| Part Number | - | P | - | L | - | B | - | E | - | R | ||||||
| Type | D Tol. | P Tolerance | D | |||||||||||||
| MKFPSA | M | S | 16 | - | P12.00 | - | L14 | - | B4.0 | - | E5.0 | - | R15 | |||
■Tolerance Selection
[ NG ]Hard chrome plated and buffed products are not available for Precision Grade Tolerance.
| D or P | Standard Grade | Precision Grade | |||||
| M | P | G | H | S | A | B | |
| m6 | p6 | g6 | h7 | - | - | - | |
| 2.00 ~ 3.00 | +0.008 +0.002 | +0.012 +0.006 | -0.002 -0.008 | 0 -0.010 | 0 -0.01 | +0.005 0 | 0 -0.005 |
| 3.01 ~ 6.00 | +0.012 +0.004 | +0.020 +0.012 | -0.004 -0.012 | 0 -0.012 | |||
| 6.01 ~ 10.00 | +0.015 +0.006 | +0.024 +0.015 | -0.005 -0.014 | 0 -0.015 | |||
| 10.01 ~ 18.00 | +0.018 +0.007 | +0.029 +0.018 | -0.006 -0.017 | 0 -0.018 | |||
| 18.01 ~ 20.00 | +0.021 +0.008 | +0.035 +0.022 | -0.007 -0.020 | 0 -0.021 | |||
■Standard
[ NG ]Hard chrome plated and buffed products are not available for * marked Precision Grade Tolerance.
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.5mm Increment | E 0.5mm Increment | R | C | Compliance with Standard | |||||||||
| Type | D Tolerance | P Tolerance | D | ① KFPSA | ② GKFPSA | ③ SKFPSA | ④ CKFPSA | ⑤ MKFPSA | ⑥ MGKFPSA | ⑦ MCKFPSA | ||||||
| KFPSA GKFPSA * SKFPSA CKFPSA (Buff Finished) MKFPSA * MGKFPSA * MCKFPSA * [ ! ]Applicable when D≥5 and P≥5. | M P G H *A *B | S M P G H *A *B | 3 | 2.00~3.00 | 3~8 | 2.0~10.0 | 1.0~15.0 | 5 10 15 20 25 30 | 0.5 | ● | ● | ● | ● | - | - | - |
| 4 | 2.00~4.00 | 4~12 | 2.0~10.0 | 1 | ● | ● | ● | ● | - | - | - | |||||
| 5 | 2.00~5.00 | 5~12 | 2.0~10.0 | 1 | ● | ● | ● | ● | ● | ● | ● | |||||
| 6 | 2.00~6.00 | 5~12 | 3.0~12.0 | 1 | ● | ● | ● | ● | ● | ● | ● | |||||
| 8 | 3.00~8.00 | 8~15 | 3.0~14.0 | 1.5 | ● | ● | ● | ● | ● | ● | ● | |||||
| 10 | 3.00~10.00 | 8~15 | 3.0~16.0 | 2 | ● | ● | ● | ● | ● | ● | ● | |||||
| 12 | 5.00~12.00 | 10~18 | 3.0~18.0 | 2 | ● | ● | ● | ● | ● | ● | ● | |||||
| 13 | 6.00~13.00 | 12~20 | 3.0~20.0 | [ ! ]Configurable range depends on P dimension. Confirm "Details of E Dimension and R Dimension Range" in the table. | 2 | ● | ● | ● | ● | ● | ● | ● | ||||
| 16 | 10.00~16.00 | 14~25 | 3.0~20.0 | 3 | ● | ● | ● | ● | ● | ● | ● | |||||
| 20 | 13.00~20.00 | 18~32 | 3.0~20.0 | 3 | ● | ● | ● | ● | ● | ● | ● | |||||
■Details of E and R Dimension Range
| P 0.01mm Increment | E 0.5mm Increment | R | |||||
| 2.00~4.00 | 1.0~2.0 | 5 | 10 | ||||
| 4.01~8.00 | 2.5~4.0 | 10 | 15 | ||||
| 8.01~12.00 | 4.5~7.0 | 10 | 15 | 20 | |||
| 12.01~16.00 | 5.0~10.0 | 15 | 20 | 25 | |||
| 16.01~20.00 | 5.0~15.0 | 20 | 25 | 30 | |||
Price list
| Part Number | Available Sizes | |||||||||
| Type | D Tolerance | P Tolerance | D | ① KFPSA | ② GKFPSA | ③ SKFPSA | ④ CKFPSA | ⑤ MKFPSA | ⑥ MGKFPSA | ⑦ MCKFPSA |
| KFPSA GKFPSA * SKFPSA CKFPSA (Buff Finished) MKFPSA * MGKFPSA * MCKFPSA * [ ! ]Applicable when D≥5 and P≥5. | M P G H *A *B | S M P G H *A *B | 3 | - | - | - | ||||
| 4 | - | - | - | |||||||
| 5 | ||||||||||
| 6 | ||||||||||
| 8 | ||||||||||
| 10 | ||||||||||
| 12 | ||||||||||
| 13 | ||||||||||
| 16 | ||||||||||
| 20 | ||||||||||
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| CKFPSAAM3-P[2-3/0.01]-L[3-8/1]-B[2-10/0.5]-E[1-2/0.5]-R[5,10] |
| CKFPSAAM4-P[2-4/0.01]-L[4-12/1]-B[2-10/0.5]-E[1-2/0.5]-R[5,10] |
| CKFPSAAM5-P[2-5/0.01]-L[5-12/1]-B[2-10/0.5]-E[1-4/0.5]-R[5,10,15] |
| CKFPSAAM6-P[2-6/0.01]-L[5-12/1]-B[3-12/0.5]-E[1-4/0.5]-R[5,10,15] |
| CKFPSAAM8-P[3-8/0.01]-L[8-15/1]-B[3-14/0.5]-E[1-4/0.5]-R[5,10,15] |
| CKFPSAAM10-P[3-10/0.01]-L[8-15/1]-B[3-16/0.5]-E[1-7/0.5]-R[5,10,15,20] |
| CKFPSAAM12-P[5-12/0.01]-L[10-18/1]-B[3-18/0.5]-E[2.5-7/0.5]-R[10,15,20] |
| CKFPSAAM13-P[6-13/0.01]-L[12-20/1]-B[3-20/0.5]-E[2.5-10/0.5]-R[10,15,20] |
| CKFPSAAM16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[4.5-10/0.5]-R[10,15,20,25] |
| CKFPSAAM20-P[13-20/0.01]-L[18-32/1]-B[3-20/0.5]-E[5-15/0.5]-R[15,20,25,30] |
| CKFPSABM3-P[2-3/0.01]-L[3-8/1]-B[2-10/0.5]-E[1-2/0.5]-R[5,10] |
| CKFPSABM4-P[2-4/0.01]-L[4-12/1]-B[2-10/0.5]-E[1-2/0.5]-R[5,10] |
| CKFPSABM5-P[2-5/0.01]-L[5-12/1]-B[2-10/0.5]-E[1-4/0.5]-R[5,10,15] |
| CKFPSABM6-P[2-6/0.01]-L[5-12/1]-B[3-12/0.5]-E[1-4/0.5]-R[5,10,15] |
| CKFPSABM8-P[3-8/0.01]-L[8-15/1]-B[3-14/0.5]-E[1-4/0.5]-R[5,10,15] |
| CKFPSABM10-P[3-10/0.01]-L[8-15/1]-B[3-16/0.5]-E[1-7/0.5]-R[5,10,15,20] |
| CKFPSABM12-P[5-12/0.01]-L[10-18/1]-B[3-18/0.5]-E[2.5-7/0.5]-R[10,15,20] |
| CKFPSABM13-P[6-13/0.01]-L[12-20/1]-B[3-20/0.5]-E[2.5-10/0.5]-R[10,15,20] |
| CKFPSABM16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[4.5-7/0.5]-R[10,15,20,25] |
| CKFPSABM16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[5-10/0.5]-R[10,15,20,25] |
| CKFPSABM20-P[13-20/0.01]-L[18-32/1]-B[3-20/0.5]-E[5-15/0.5]-R[15,20,25,30] |
| CKFPSAGM3-P[2-3/0.01]-L[3-8/1]-B[2-10/0.5]-E[1-2/0.5]-R[5,10] |
| CKFPSAGM4-P[2-4/0.01]-L[4-12/1]-B[2-10/0.5]-E[1-2/0.5]-R[5,10] |
| CKFPSAGM5-P[2-5/0.01]-L[5-12/1]-B[2-10/0.5]-E[1-4/0.5]-R[5,10,15] |
| CKFPSAGM6-P[2-6/0.01]-L[5-12/1]-B[3-12/0.5]-E[1-4/0.5]-R[5,10,15] |
| CKFPSAGM8-P[3-8/0.01]-L[8-15/1]-B[3-14/0.5]-E[1-4/0.5]-R[5,10,15] |
| CKFPSAGM10-P[3-10/0.01]-L[8-15/1]-B[3-16/0.5]-E[1-7/0.5]-R[5,10,15,20] |
| CKFPSAGM12-P[5-12/0.01]-L[10-18/1]-B[3-18/0.5]-E[2.5-7/0.5]-R[10,15,20] |
| CKFPSAGM13-P[6-13/0.01]-L[12-20/1]-B[3-20/0.5]-E[2.5-10/0.5]-R[10,15,20] |
| CKFPSAGM16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[4.5-7/0.5]-R[10,15,20,25] |
| CKFPSAGM16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[5-10/0.5]-R[10,15,20,25] |
| CKFPSAGM20-P[13-20/0.01]-L[18-32/1]-B[3-20/0.5]-E[5-15/0.5]-R[15,20,25,30] |
| CKFPSAHM3-P[2-3/0.01]-L[3-8/1]-B[2-10/0.5]-E[1-2/0.5]-R[5,10] |
| CKFPSAHM4-P[2-4/0.01]-L[4-12/1]-B[2-10/0.5]-E[1-2/0.5]-R[5,10] |
| CKFPSAHM5-P[2-5/0.01]-L[5-12/1]-B[2-10/0.5]-E[1-4/0.5]-R[5,10,15] |
| CKFPSAHM6-P[2-6/0.01]-L[5-12/1]-B[3-12/0.5]-E[1-4/0.5]-R[5,10,15] |
| CKFPSAHM8-P[3-8/0.01]-L[8-15/1]-B[3-14/0.5]-E[1-4/0.5]-R[5,10,15] |
| CKFPSAHM10-P[3-10/0.01]-L[8-15/1]-B[3-16/0.5]-E[1-7/0.5]-R[5,10,15,20] |
| CKFPSAHM12-P[5-12/0.01]-L[10-18/1]-B[3-18/0.5]-E[2.5-7/0.5]-R[10,15,20] |
| CKFPSAHM13-P[6-13/0.01]-L[12-20/1]-B[3-20/0.5]-E[2.5-10/0.5]-R[10,15,20] |
| CKFPSAHM16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[4.5-7/0.5]-R[10,15,20,25] |
| CKFPSAHM16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[5-10/0.5]-R[10,15,20,25] |
| CKFPSAHM20-P[13-20/0.01]-L[18-32/1]-B[3-20/0.5]-E[5-15/0.5]-R[15,20,25,30] |
| CKFPSAMM3-P[2-3/0.01]-L[3-8/1]-B[2-10/0.5]-E[1-2/0.5]-R[5,10] |
| CKFPSAMM4-P[2-4/0.01]-L[4-12/1]-B[2-10/0.5]-E[1-2/0.5]-R[5,10] |
| CKFPSAMM5-P[2-5/0.01]-L[5-12/1]-B[2-10/0.5]-E[1-4/0.5]-R[5,10,15] |
| CKFPSAMM6-P[2-6/0.01]-L[5-12/1]-B[3-12/0.5]-E[1-4/0.5]-R[5,10,15] |
| CKFPSAMM8-P[3-8/0.01]-L[8-15/1]-B[3-14/0.5]-E[1-4/0.5]-R[5,10,15] |
| CKFPSAMM10-P[3-10/0.01]-L[8-15/1]-B[3-16/0.5]-E[1-7/0.5]-R[5,10,15,20] |
| CKFPSAMM12-P[5-12/0.01]-L[10-18/1]-B[3-18/0.5]-E[2.5-7/0.5]-R[10,15,20] |
| CKFPSAMM13-P[6-13/0.01]-L[12-20/1]-B[3-20/0.5]-E[2.5-10/0.5]-R[10,15,20] |
| CKFPSAMM16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[4.5-10/0.5]-R[10,15,20,25] |
| CKFPSAMM20-P[13-20/0.01]-L[18-32/1]-B[3-20/0.5]-E[5-15/0.5]-R[15,20,25,30] |
| CKFPSAPM3-P[2-3/0.01]-L[3-8/1]-B[2-10/0.5]-E[1-2/0.5]-R[5,10] |
| CKFPSAPM4-P[2-4/0.01]-L[4-12/1]-B[2-10/0.5]-E[1-2/0.5]-R[5,10] |
| CKFPSAPM5-P[2-5/0.01]-L[5-12/1]-B[2-10/0.5]-E[1-4/0.5]-R[5,10,15] |
| CKFPSAPM6-P[2-6/0.01]-L[5-12/1]-B[3-12/0.5]-E[1-4/0.5]-R[5,10,15] |
| CKFPSAPM8-P[3-8/0.01]-L[8-15/1]-B[3-14/0.5]-E[1-4/0.5]-R[5,10,15] |
| CKFPSAPM10-P[3-10/0.01]-L[8-15/1]-B[3-16/0.5]-E[1-7/0.5]-R[5,10,15,20] |
| CKFPSAPM12-P[5-12/0.01]-L[10-18/1]-B[3-18/0.5]-E[2.5-7/0.5]-R[10,15,20] |
Loading...
Support Information
Characteristics of locating pins in other forms
| Product Name | Feature | Catalog |
|---|---|---|
| Small Diameter Locating Pins | Locating Pins with Ø4 or less diameter suitable for small works. | Click here |
| Locating Pins for Height Adjusting | Locating Pins with short head for thin PC boards. | Click here |
| Nonmagnetic Locating Pins | Nonmagnetic Aluminum locating pins suitable for environments where magnetism must be avoided. | Click here |
| Plastic Locating Pins | Plastic Locating Pins prevent work damages. | Click here |
| Height Adjusting Pins | Locating Pins suitable for locating in vertical direction. | Click here |
| Support Pins | Pins for use in higher position to avoid interferences. | Click here |
Compatible Models
Basic Information
| Basic Shape | Small Head | Head Shape | Round | Head Tip Shape | Round Tapered |
|---|---|---|---|---|---|
| Drive | No | Shank Style | Straight(Press Fit) |
Specification/Dimensions
-
Material
- Steel
- Stainless Steel
- Steel
-
Heat Treatment
- No
- Immersion Quenching
-
Surface Finish
- None
- Hard Chrome Plating
- Buffing
- Hard Chrome Plating + Buff finished
- None
-
Positioning Side Outer Diameter P(mm)
-
Mounted Side Outer Diameter D(mm)
-
Shank Dia. Tolerance
-
Mounting Section Length L(mm)
-
Positioning Part Length B(mm)
-
R(mm)
-
Taper Length E(mm)
-
type
- CKFPSAAA
- CKFPSAAB
- CKFPSAAG
- CKFPSAAH
- CKFPSAAM
- CKFPSAAP
- CKFPSAAS
- CKFPSABA
- CKFPSABB
- CKFPSABG
- CKFPSABH
- CKFPSABM
- CKFPSABP
- CKFPSABS
- CKFPSAGA
- CKFPSAGB
- CKFPSAGG
- CKFPSAGH
- CKFPSAGM
- CKFPSAGP
- CKFPSAGS
- CKFPSAHA
- CKFPSAHB
- CKFPSAHG
- CKFPSAHH
- CKFPSAHM
- CKFPSAHP
- CKFPSAHS
- CKFPSAMA
- CKFPSAMB
- CKFPSAMG
- CKFPSAMH
- CKFPSAMM
- CKFPSAMP
- CKFPSAMS
- CKFPSAPA
- CKFPSAPB
- CKFPSAPG
- CKFPSAPH
- CKFPSAPM
- CKFPSAPP
- CKFPSAPS
- GKFPSA□□
- KFPSAAA
- KFPSAAB
- KFPSAAG
- KFPSAAH
- KFPSAAM
- KFPSAAP
- KFPSAAS
- KFPSABA
- KFPSABB
- KFPSABG
- KFPSABH
- KFPSABM
- KFPSABP
- KFPSABS
- KFPSAGA
- KFPSAGB
- KFPSAGG
- KFPSAGH
- KFPSAGM
- KFPSAGP
- KFPSAGS
- KFPSAHA
- KFPSAHB
- KFPSAHG
- KFPSAHH
- KFPSAHM
- KFPSAHP
- KFPSAHS
- KFPSAMA
- KFPSAMB
- KFPSAMG
- KFPSAMH
- KFPSAMM
- KFPSAMP
- KFPSAMS
- KFPSAPA
- KFPSAPB
- KFPSAPG
- KFPSAPH
- KFPSAPM
- KFPSAPP
- KFPSAPS
- MCKFPSAGG
- MCKFPSAGH
- MCKFPSAGM
- MCKFPSAGP
- MCKFPSAGS
- MCKFPSAHG
- MCKFPSAHH
- MCKFPSAHM
- MCKFPSAHP
- MCKFPSAHS
- MCKFPSAMG
- MCKFPSAMH
- MCKFPSAMM
- MCKFPSAMP
- MCKFPSAMS
- MCKFPSAPG
- MCKFPSAPH
- MCKFPSAPM
- MCKFPSAPP
- MCKFPSAPS
- MGKFPSAGG
- MGKFPSAGH
- MGKFPSAGM
- MGKFPSAGP
- MGKFPSAGS
- MGKFPSAHG
- MGKFPSAHH
- MGKFPSAHM
- MGKFPSAHP
- MGKFPSAHS
- MGKFPSAMG
- MGKFPSAMH
- MGKFPSAMM
- MGKFPSAMP
- MGKFPSAMS
- MGKFPSAPG
- MGKFPSAPH
- MGKFPSAPM
- MGKFPSAPP
- MGKFPSAPS
- MKFPSAGG
- MKFPSAGH
- MKFPSAGM
- MKFPSAGP
- MKFPSAGS
- MKFPSAHG
- MKFPSAHH
- MKFPSAHM
- MKFPSAHP
- MKFPSAHS
- MKFPSAMG
- MKFPSAMH
- MKFPSAMM
- MKFPSAMP
- MKFPSAMS
- MKFPSAPG
- MKFPSAPH
- MKFPSAPM
- MKFPSAPP
- MKFPSAPS
- SKFPSAAA
- SKFPSAAB
- SKFPSAAG
- SKFPSAAH
- SKFPSAAM
- SKFPSAAP
- SKFPSAAS
- SKFPSABA
- SKFPSABB
- SKFPSABG
- SKFPSABH
- SKFPSABM
- SKFPSABP
- SKFPSABS
- SKFPSAGA
- SKFPSAGB
- SKFPSAGG
- SKFPSAGH
- SKFPSAGM
- SKFPSAGP
- SKFPSAGS
- SKFPSAHA
- SKFPSAHB
- SKFPSAHG
- SKFPSAHH
- SKFPSAHM
- SKFPSAHP
- SKFPSAHS
- SKFPSAMA
- SKFPSAMB
- SKFPSAMG
- SKFPSAMH
- SKFPSAMM
- SKFPSAMP
- SKFPSAMS
- SKFPSAPA
- SKFPSAPB
- SKFPSAPG
- SKFPSAPH
- SKFPSAPM
- SKFPSAPP
- SKFPSAPS
-
Tolerance of Positioning Side Outer Diameter
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 10 Days or Less
- 12 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Large Head Locating Pins - Round head, flat tip and internally threaded shank.
- Large Head Locating Pins - Round or diamond shaped head, selectable tip type and straight shank.
- Large Head Locating Pins - Round head, selectable tip angle and type, externally threaded shank.
- Straight or Large Head Locating Pins - Round or diamond shaped head, selectable tip type and internally threaded shank.
- Large Head Locating Pins - Round or diamond head, tapered tip, externally threaded shank (Hardened Stainless Steel).
- Small Head Locating Pins - Round head with tapered tip and straight shank.
- Straight Locating Pins - Round head with spherical tip and straight shank.
- Straight Locating Pins - For collet chucks, countersunk type.
Complementary Products
-
Locating Pins for Fixtures - Standard Grade, Shouldered, Threaded
MISUMI Days to Ship : 8 Days or more
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy