(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Part Number
Configured Part Number is shown.
Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type | |
Round | Diamond | ||||
① | O1 Tool Steel Equivalent | - | Treated Hardness: 60 ~ 63HRC | JPCTS | JPCTD |
② | O1 Tool Steel Equivalent | Hard Chrome Plating | Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPCTS | GJPCTD |
④ | 304 Stainless Steel | Hard Chrome Plating | Plating Hardness: 750HV ~ | HJPCTS | HJPCTD |
⑤ | 440C or 420 Stainless Steel | - | Treated Hardness: 50 ~ 55HRC | CJPCTS | CJPCTD |
Part Number | - | P | - | L | - | B | - | Flat Position |
JPCTD10 | - | P10.05 | - | L22 | - | B7.5 | - | X |
Part Number | D Dimension Tolerance g6 | P 0.01 mm Increment | L 1 mm Increment | B 0.1 mm Increment | Flat Position | ℓ3 | ℓ4 | h | C | m | Applicable Set Screws | (W) | |||
Type | Shape | D | When D<P | When D≥P | |||||||||||
Notched JPCT GJPCT HJPCT CJPCT | S Round D Diamond | 6 | -0.004 -0.012 | 5.00–10.00 | 12–20 | 5.0–20.0 | X Y [ ! ]Applicable to diamond shape only. | 5.5 | 2.5 | 1.0 | 1 | 3 | M4 | 3 | 1.5 |
8 | -0.005 -0.014 | 5.00–13.00 | 14–22 | 5.0–30.0 (15.0) | 7.5 | 3.5 | 1.2 | 1.5 | 4 | M5 | 3.5 | 1.8 | |||
10 | 5.00–15.00 | 15–25 | 5.0–30.0 (25.0) | 7.5 | 3.5 | 1.2 | 2 | 4 | M6 | 4 | 2.2 | ||||
12 | -0.006 -0.017 | 5.00–16.00 | 15–25 | 7.5 | 3.5 | 1.2 | 2 | 4 | M6 | 5 | 2.5 | ||||
16 | 10.00–25.00 | 15–35 | 5.0–30.0 | 10.5 | 5.5 | 2.0 | 3 | 5 | M8 | 7 | 4 | ||||
20 | -0.007 -0.020 | 13.00–30.00 | 27–40 | 13.5 | 8.5 | 2.0 | 3 | 5 | M8 | 9 | 5 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
CJPCTD6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1]-[X,Y] |
CJPCTD8-P[5-13/0.01]-L[14-22/1]-B[5-15/0.1]-[X,Y] |
CJPCTD10-P[5-15/0.01]-L[15-25/1]-B[5-25/0.1]-[X,Y] |
CJPCTD12-P[5-16/0.01]-L[15-25/1]-B[5-25/0.1]-[X,Y] |
CJPCTD16-P[10-25/0.01]-L[15-35/1]-B[5-30/0.1]-[X,Y] |
CJPCTD20-P[13-30/0.01]-L[27-40/1]-B[5-30/0.1]-[X,Y] |
CJPCTS6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1] |
CJPCTS8-P[5-13/0.01]-L[14-22/1]-B[5-30/0.1] |
CJPCTS10-P[5-15/0.01]-L[15-25/1]-B[5-30/0.1] |
CJPCTS12-P[5-16/0.01]-L[15-25/1]-B[5-30/0.1] |
CJPCTS16-P[10-25/0.01]-L[15-35/1]-B[5-30/0.1] |
CJPCTS20-P[13-30/0.01]-L[27-40/1]-B[5-30/0.1] |
GJPCTD6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1]-[X,Y] |
GJPCTD8-P[5-13/0.01]-L[14-22/1]-B[5-15/0.1]-[X,Y] |
GJPCTD10-P[5-15/0.01]-L[15-25/1]-B[5-25/0.1]-[X,Y] |
GJPCTD12-P[5-16/0.01]-L[15-25/1]-B[5-25/0.1]-[X,Y] |
GJPCTD16-P[10-25/0.01]-L[15-35/1]-B[5-30/0.1]-[X,Y] |
GJPCTD20-P[13-30/0.01]-L[27-40/1]-B[5-30/0.1]-[X,Y] |
GJPCTS6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1] |
GJPCTS8-P[5-13/0.01]-L[14-22/1]-B[5-30/0.1] |
GJPCTS10-P[5-15/0.01]-L[15-25/1]-B[5-30/0.1] |
GJPCTS12-P[5-16/0.01]-L[15-25/1]-B[5-30/0.1] |
GJPCTS16-P[10-25/0.01]-L[15-35/1]-B[5-30/0.1] |
GJPCTS20-P[13-30/0.01]-L[27-40/1]-B[5-30/0.1] |
HJPCTD6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1]-[X,Y] |
HJPCTD8-P[5-13/0.01]-L[14-22/1]-B[5-15/0.1]-[X,Y] |
HJPCTD10-P[5-15/0.01]-L[15-25/1]-B[5-25/0.1]-[X,Y] |
HJPCTD12-P[5-16/0.01]-L[15-25/1]-B[5-25/0.1]-[X,Y] |
HJPCTD16-P[10-25/0.01]-L[15-35/1]-B[5-30/0.1]-[X,Y] |
HJPCTD20-P[13-30/0.01]-L[27-40/1]-B[5-30/0.1]-[X,Y] |
HJPCTS6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1] |
HJPCTS8-P[5-13/0.01]-L[14-22/1]-B[5-30/0.1] |
HJPCTS10-P[5-15/0.01]-L[15-25/1]-B[5-30/0.1] |
HJPCTS12-P[5-16/0.01]-L[15-25/1]-B[5-30/0.1] |
HJPCTS16-P[10-25/0.01]-L[15-35/1]-B[5-30/0.1] |
HJPCTS20-P[13-30/0.01]-L[27-40/1]-B[5-30/0.1] |
JPCTD6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1]-[X,Y] |
JPCTD8-P[5-13/0.01]-L[14-22/1]-B[5-15/0.1]-[X,Y] |
JPCTD10-P[5-15/0.01]-L[15-25/1]-B[5-25/0.1]-[X,Y] |
JPCTD12-P[5-16/0.01]-L[15-25/1]-B[5-25/0.1]-[X,Y] |
JPCTD16-P[10-25/0.01]-L[15-35/1]-B[5-30/0.1]-[X,Y] |
JPCTD20-P[13-30/0.01]-L[27-40/1]-B[5-30/0.1]-[X,Y] |
JPCTS6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1] |
JPCTS8-P[5-13/0.01]-L[14-22/1]-B[5-30/0.1] |
JPCTS10-P[5-15/0.01]-L[15-25/1]-B[5-30/0.1] |
JPCTS12-P[5-16/0.01]-L[15-25/1]-B[5-30/0.1] |
JPCTS16-P[10-25/0.01]-L[15-35/1]-B[5-30/0.1] |
JPCTS20-P[13-30/0.01]-L[27-40/1]-B[5-30/0.1] |
Loading...
Basic Shape | Large Head / Small Head | Head Tip Shape | Tapered | Drive | No |
---|---|---|---|---|---|
Shank Style | Notch Shape | Tolerance of Positioning Side Outer Diameter | 0/-0.01 | Shank Dia. Tolerance | g6 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy