(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
•Shape: Large Head
•Head Dia. Tolerance: 0/-0.01
•Head Shape: Round
•Head Tip Shape: Round Tapered
•Shank Style: Tapped
Part Number
Configured Part Number is shown.
[ M ]Material | [ H ]Hardness | B Fixed | B Configurable | |
Flathead Slot | Without Flathead Slot | Flathead Slot | ||
O1 Tool Steel Equivalent | Treated Hardness: 60 ~ 63HRC | HPSTM | HPSFS | HPSFM |
304 Stainless Steel | - | SHPSTM | - | SHPSFM |
440C or 420 Stainless Steel | Treated Hardness: 50 ~ 55HRC | CHPSTM | CHPSFS | CHPSFM |
Part Number | - | L | - | P | - | B |
HPSTM5 HPSFS6 | - - | 15 10 | - - | P7.20 P8.05 | - | B1.20 |
Part Number | L | P 0.01mm Increment | B | E | ℓ | M (Coarse) | * Tightening Torque N • cm | ||||
Type | D | D Tolerance | |||||||||
Tapped Flathead Slot HPSTM SHPSTM CHPSTM | 5 | +0.012 +0.007 | 12 | 15 | 6.00~8.00 | 2 | 5 | 3 | M3 | 98 | |
6 | +0.012 +0.007 | 12 | 15 | 7.00~9.00 | 2 | 6 | 3 | M3 | 98 | ||
8 | +0.012 +0.007 | 15 | 18 | 9.00~13.00 | 3 | 6 | 3 | M4 | 225 | ||
10 | +0.012 +0.007 | 15 | 18 | 11.00~15.00 | 3 | 6 | 3 | M5 | 461 |
Part Number | L | P 0.01mm Increment | B 0.01mm Increment | E | M (Coarse) | ||||||||
Type | D | D Tolerance g6 | |||||||||||
Without Flathead Slot HPSFS CHPSFS | Flathead Slot HPSFM SHPSFM CHPSFM | 5 | -0.004 -0.012 | 6 | 8 | 10 | 12 | 15 | 6.00~8.00 | 1.00~10.00 | 5 | M3 | |
6 | -0.004 -0.012 | 6 | 8 | 10 | 12 | 15 | 7.00~10.00 | 1.00~12.00 | 6 | M3 | |||
8 | -0.005 -0.014 | 8 | 10 | 12 | 15 | 18 | 9.00~13.00 | 1.00~15.00 | 6 | M4 | |||
10 | -0.005 -0.014 | 10 | 12 | 15 | 18 | 11.00~15.00 | 1.00~20.00 | 6 | M5 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
CHPSFM5-[6,8,10,12,15]-P[6-8/0.01]-B[1-10/0.01] |
CHPSFM6-[6,8,10,12,15]-P[7-10/0.01]-B[1-12/0.01] |
CHPSFM8-[8,10,12,15,18]-P[9-13/0.01]-B[1-15/0.01] |
CHPSFM10-[10,12,15,18]-P[11-15/0.01]-B[1-20/0.01] |
CHPSFS5-[6,8,10,12,15]-P[6-8/0.01]-B[1-10/0.01] |
CHPSFS6-[6,8,10,12,15]-P[7-10/0.01]-B[1-12/0.01] |
CHPSFS8-[8,10,12,15,18]-P[9-13/0.01]-B[1-15/0.01] |
CHPSFS10-[10,12,15,18]-P[11-15/0.01]-B[1-20/0.01] |
CHPSTM5-[12,15]-P[6-8/0.01] |
CHPSTM6-[12,15]-P[7-9/0.01] |
CHPSTM8-[15,18]-P[9-13/0.01] |
CHPSTM10-[15,18]-P[11-15/0.01] |
HPSFM5-[6,8,10,12,15]-P[6-8/0.01]-B[1-10/0.01] |
HPSFM6-[6,8,10,12,15]-P[7-10/0.01]-B[1-12/0.01] |
HPSFM8-[8,10,12,15,18]-P[9-13/0.01]-B[1-15/0.01] |
HPSFM10-[10,12,15,18]-P[11-15/0.01]-B[1-20/0.01] |
HPSFS5-[6,8,10,12,15]-P[6-8/0.01]-B[1-10/0.01] |
HPSFS6-[6,8,10,12,15]-P[7-10/0.01]-B[1-12/0.01] |
HPSFS8-[8,10,12,15,18]-P[9-13/0.01]-B[1-15/0.01] |
HPSFS10-[10,12,15,18]-P[11-15/0.01]-B[1-20/0.01] |
HPSTM5-[12,15]-P[6-8/0.01] |
HPSTM6-[12,15]-P[7-9/0.01] |
HPSTM8-[15,18]-P[9-13/0.01] |
HPSTM10-[15,18]-P[11-15/0.01] |
SHPSFM5-[6,8,10,12,15]-P[6-8/0.01]-B[1-10/0.01] |
SHPSFM6-[6,8,10,12,15]-P[7-10/0.01]-B[1-12/0.01] |
SHPSFM8-[8,10,12,15,18]-P[9-13/0.01]-B[1-15/0.01] |
SHPSFM10-[10,12,15,18]-P[11-15/0.01]-B[1-20/0.01] |
SHPSTM5-[12,15]-P[6-8/0.01] |
SHPSTM6-[12,15]-P[7-9/0.01] |
SHPSTM8-[15,18]-P[9-13/0.01] |
SHPSTM10-[15,18]-P[11-15/0.01] |
Loading...
Basic Shape | Large Head | Head Shape | Round | Head Tip Shape | Round Tapered |
---|---|---|---|---|---|
Shank Style | Female Thread | Surface Finish | No | Tolerance of Positioning Side Outer Diameter | 0/-0.01 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy