(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Selectable material locating pins: Polyacetal, MC nylon, CDR2 nylon and peek. Tapered, spherical or flat tip. Internally threaded shank with g6 tolerances, thread sizes from M3 to M6. P, L and B parameters configurable, D is selectable.
Part Number
Configured Part Number is shown.
Type | Fixed Part | Head Shape | [ M ]Material | Operating Ambient Temperature | |
P Configurable | P, L, B Configurable | ||||
JP | FJP | Y (Tapped) | A (Tapered) FA (Flat) Q (Sphere) | Polyacetal (Black) | -45~95°C |
MJP | MFP | MC Nylon (Blue) | -40~120°C | ||
DJP | DFP | Conductive MC Nylon CDR2 (Black) | -40~120°C | ||
JKP | FKP | PEEK (Natural Ivory) | -50~250°C |
Part Number | - | P | - | L | - | B | ||||||
Type | Fixed Part | Head Shape | D | |||||||||
FJP | Y | Q | 10 | - | P12.00 | - | L12 | - | B7.0 |
Part Number | P 0.01mm Increment | L | B | C | m | ℓ1 | M (Coarse) | ℓ2 | ||||
Type | Fixed Part | Head Shape | D | D Tolerance g6 | ||||||||
JP MJP DJP JKP | Y (Tapped) | A (Tapered) FA (Flat) Q (Sphere) | 6 | -0.004 -0.012 | 6.50~10.00 | 10 | 8 | 1 | 3 | 1 | M3 | 5 |
8 | -0.005 -0.014 | 9.00~13.00 | 15 | 8 | 1.5 | 4 | 1 | M5 | 8 | |||
10 | -0.005 -0.014 | 11.00~15.00 | 15 | 10 | 2 | 4 | 1 | M5 | 8 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | m | ℓ1 | M (Coarse) | ℓ2 | ||||
Type | Fixed Part | Head Shape | D | D Tolerance g6 | ||||||||
FJP MFP DFP FKP | Y (Tapped) | A (Tapered) FA (Flat) Q (Sphere) | 6 | -0.004 -0.012 | 6.50~10.00 | 6~12 | 2.0~12.0 | 1 | 3 | 1 | M3 | 5 |
8 | -0.005 -0.014 | 9.00~13.00 | 8~16 | 2.0 (3.0)~15.0 | 1.5 | 4 | 1 | M5 | 8 | |||
10 | -0.005 -0.014 | 11.00~15.00 | 10~20 | 3.0 (4.0)~20.0 | 2 | 4 | 1 | M5 | 8 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
DFPYFA6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
DFPYFA8-P[9-13/0.01]-L[8-16/1]-B[3-15/0.1] |
DFPYFA10-P[11-15/0.01]-L[10-20/1]-B[4-20/0.1] |
DJPYFA6-P[6.5-10/0.01] |
DJPYFA8-P[9-13/0.01] |
DJPYFA10-P[11-15/0.01] |
FJPYFA6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
FJPYFA8-P[9-13/0.01]-L[8-16/1]-B[3-15/0.1] |
FJPYFA10-P[11-15/0.01]-L[10-20/1]-B[4-20/0.1] |
MJPYFA6-[6.5-10/0.01] |
MJPYFA8-[9-13/0.01] |
MJPYFA10-[11-15/0.01] |
Loading...
Basic Shape | Large Head | Head Shape | Round | Drive | No |
---|---|---|---|---|---|
Shank Style | Female Thread | Heat Treatment | No | Surface Finish | No |
Tolerance of Positioning Side Outer Diameter | 0/-0.05 | Shank Dia. Tolerance | g6 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy