(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Large Head Locating Pins - Round or diamond shaped head, tapered tip, straight shank.
- Spec Change
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
| Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type | |
| Round | Diamond | ||||
| ① | O1 Tool Steel Equivalent | - | Treated Hardness: 60 ~ 63HRC | KFA | KFD |
| ② | O1 Tool Steel Equivalent | Hard Chrome Plating | Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GKFA | GKFD |
| ③ | O1 Tool Steel Equivalent | - | - | BKFA | BKFD |
| ④ | 304 Stainless Steel | - | - | SKFA | SKFD |
| ⑤ | 304 Stainless Steel | Hard Chrome Plating | Plating Hardness: 750HV ~ | HKFA | HKFD |
| ⑥ | 440C or 420 Stainless Steel | - | Treated Hardness: 50 ~ 55HRC | CKFA | CKFD |
Specifications
| Part Number | - | P | - | L | - | B | - | E | - | A | ||||||||
| Type | Shape | D Tol. | P Tolerance | D | ||||||||||||||
| KF | A | M | S | 6 | - | P10.00 | - | L6 | - | B3.0 | - | E5.0 | - | A30 | ||||
■Tolerance Selection
[ NG ]Hard chrome plated products are not available for Precision Grade Tolerance.
| D or P | Standard Grade | Precision Grade | |||||
| M | P | G | H | S | A | B | |
| m6 | p6 | g6 | h7 | - | - | - | |
| 1.00 ~ 3.00 | +0.008 +0.002 | +0.012 +0.006 | -0.002 -0.008 | 0 -0.010 | 0 -0.01 | +0.005 0 | 0 -0.005 |
| 3.01 ~ 6.00 | +0.012 +0.004 | +0.020 +0.012 | -0.004 -0.012 | 0 -0.012 | |||
| 6.01 ~ 10.00 | +0.015 +0.006 | +0.024 +0.015 | -0.005 -0.014 | 0 -0.015 | |||
| 10.01 ~ 18.00 | +0.018 +0.007 | +0.029 +0.018 | -0.006 -0.017 | 0 -0.018 | |||
| 18.01 ~ 30.00 | +0.021 +0.008 | +0.035 +0.022 | -0.007 -0.020 | 0 -0.021 | |||
■Standard
[ ! ]P dimension in ( ) is applicable to Diamond Shape. [ NG ]Hard chrome plated products are not available for * marked Precision Grade (Precision Grade A and B).
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | E 0.1mm Increment | A | C | (W) | ||||
| Type | Shape | D Tolerance | P Tolerance | D | |||||||
| KF GKF * BKF SKF HKF * CKF | A (Round) D (Diamond) | M P G H *A *B | S M P G H *A *B | 1 | 1.00~3.00 (1.50~2.50) | 2, 3 | 1.5~5.0 | 0.5~10.0 | 15 30 45 60 | 0.1 | 0.6 |
| 2 | 2.00~6.00 | 2~6 | 1.5~.15.0(10.0) | 0.5 | 1.2 | ||||||
| 3 | 3.00~8.00 | 3~10 | 1.5~15.0(10.0) | 0.5 | 1.5 | ||||||
| 4 | 4.00~8.00 | 3(4)~14 | 1.5~15.0(10.0) | 1 | 1.8 | ||||||
| 5 | 5.00~10.00 | 5~15 | 1.5~15.0(10.0) | 1 | 2.2 | ||||||
| 6 | 6.00~10.00 | 5~15 | 1.5~30.0(15.0) | 1 | 3 | ||||||
| 8 | 8.00~15.00 | 5(6)~16 | 1.5~30.0(15.0) | 1.5 | 3.5 | ||||||
| 10 | 10.00~17.00 | 5(10)~20 | 3.0~30.0(25.0) | 2 | 4 | ||||||
| 12 | 12.00~18.00 | 6(10)~24 | 3.0~30.0(25.0) | 2 | 5 | ||||||
| 13 | 13.00~20.00 | 7(12)~26 | 5.0~30.0(25.0) | 2 | 5.5 | ||||||
| 16 | 16.00~27.00 | 8(15)~32 | 5.0~30.0 | 3 | 7 | ||||||
| 20 | 20.00~30.00 | 10(15)~40 | 5.0~30.0 | 3 | 9 | ||||||
Price list
■Press Fit
| D | Available Sizes Round Shape | Available Sizes Diamond Shape | ||||||||||
| ①O1 Tool Steel Hardened KFA | ②Hard O1 Tool Steel GKFA | ③O1 Tool Steel BKFA | ④304 Stainless Steel SKFA | ⑤Hard 304 Stainless Steel HKFA | ⑥440C or 420 Stainless Steel CKFA | ①O1 Tool Steel Hardened KFD | ②Hard O1 Tool Steel GKFD | ③O1 Tool Steel BKFD | ④304 Stainless Steel SKFD | ⑤Hard 304 Stainless Steel HKFD | ⑥440C or 420 Stainless Steel CKFD | |
| 1 | ||||||||||||
| 2 | ||||||||||||
| 3 | ||||||||||||
| 4 | ||||||||||||
| 5 | ||||||||||||
| 6 | ||||||||||||
| 8 | ||||||||||||
| 10 | ||||||||||||
| 12 | ||||||||||||
| 13 | ||||||||||||
| 16 | ||||||||||||
| 20 | ||||||||||||
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| BKFAAA1-P[1-3/0.01]-L[2-3/1]-B[1.5-5/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAA2-P[2-6/0.01]-L[2-6/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAA3-P[3-8/0.01]-L[3-10/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAA4-P[4-8/0.01]-L[3-14/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAA5-P[5-10/0.01]-L[5-15/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAA6-P[6-10/0.01]-L[5-15/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAA8-P[8-15/0.01]-L[5-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAA10-P[10-17/0.01]-L[5-20/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAA12-P[12-18/0.01]-L[6-24/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAA13-P[13-20/0.01]-L[7-26/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAA16-P[16-27/0.01]-L[8-32/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAA20-P[20-30/0.01]-L[10-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAB1-P[1-3/0.01]-L[2-3/1]-B[1.5-5/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAB2-P[2-6/0.01]-L[2-6/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAB3-P[3-8/0.01]-L[3-10/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAB4-P[4-8/0.01]-L[3-14/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAB5-P[5-10/0.01]-L[5-15/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAB6-P[6-10/0.01]-L[5-15/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAB8-P[8-15/0.01]-L[5-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAB10-P[10-17/0.01]-L[5-20/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAB12-P[12-18/0.01]-L[6-24/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAB13-P[13-20/0.01]-L[7-26/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAB16-P[16-27/0.01]-L[8-32/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAB20-P[20-30/0.01]-L[10-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAG1-P[1-3/0.01]-L[2-3/1]-B[1.5-5/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAG2-P[2-6/0.01]-L[2-6/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAG3-P[3-8/0.01]-L[3-10/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAG4-P[4-8/0.01]-L[3-14/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAG5-P[5-10/0.01]-L[5-15/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAG6-P[6-10/0.01]-L[5-15/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAG8-P[8-15/0.01]-L[5-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAG10-P[10-17/0.01]-L[5-20/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAG12-P[12-18/0.01]-L[6-24/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAG13-P[13-20/0.01]-L[7-26/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAG16-P[16-27/0.01]-L[8-32/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAG20-P[20-30/0.01]-L[10-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAH1-P[1-3/0.01]-L[2-3/1]-B[1.5-5/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAH2-P[2-6/0.01]-L[2-6/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAH3-P[3-8/0.01]-L[3-10/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAH4-P[4-8/0.01]-L[3-14/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAH5-P[5-10/0.01]-L[5-15/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAH6-P[6-10/0.01]-L[5-15/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAH8-P[8-15/0.01]-L[5-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAH10-P[10-17/0.01]-L[5-20/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAH12-P[12-18/0.01]-L[6-24/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAH13-P[13-20/0.01]-L[7-26/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAH16-P[16-27/0.01]-L[8-32/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAH20-P[20-30/0.01]-L[10-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAM1-P[1-3/0.01]-L[2-3/1]-B[1.5-5/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAM2-P[2-6/0.01]-L[2-6/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAM3-P[3-8/0.01]-L[3-10/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAM4-P[4-8/0.01]-L[3-14/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAM5-P[5-10/0.01]-L[5-15/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAM6-P[6-10/0.01]-L[5-15/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAM8-P[8-15/0.01]-L[5-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAM10-P[10-17/0.01]-L[5-20/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAM12-P[12-18/0.01]-L[6-24/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAM13-P[13-20/0.01]-L[7-26/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAM16-P[16-27/0.01]-L[8-32/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
| BKFAAM20-P[20-30/0.01]-L[10-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
Loading...
Support Information
Characteristics of locating pins in other forms
| Product Name | Feature | Catalog |
|---|---|---|
| Small Diameter Locating Pins | Locating Pins with Ø4 or less diameter suitable for small works. | Click here |
| Locating Pins for Height Adjusting | Locating Pins with short head for thin PC boards. | Click here |
| Nonmagnetic Locating Pins | Nonmagnetic Aluminum locating pins suitable for environments where magnetism must be avoided. | Click here |
| Plastic Locating Pins | Plastic Locating Pins prevent work damages. | Click here |
| Height Adjusting Pins | Locating Pins suitable for locating in vertical direction. | Click here |
| Support Pins | Pins for use in higher position to avoid interferences. | Click here |
Compatible Models
Basic Information
| Basic Shape | Large Head | Head Tip Shape | Tapered | Drive | No |
|---|---|---|---|---|---|
| Shank Style | Straight(Press Fit) |
Specification/Dimensions
-
Head Shape
-
Round -
Diamond
-
-
Material
- Steel
- Stainless Steel
- Steel
-
Heat Treatment
- No
- Hardened
-
Surface Finish
- None
- Hard Chrome Plating
- None
-
Positioning Side Outer Diameter P(mm)
-
Tolerance of Positioning Side Outer Diameter
-
Mounted Side Outer Diameter D(mm)
-
Shank Dia. Tolerance
-
Mounting Section Length L(mm)
-
A(°)
-
Positioning Part Length B(mm)
-
Taper Length E(mm)
-
type
- BKFAAA
- BKFAAB
- BKFAAG
- BKFAAH
- BKFAAM
- BKFAAP
- BKFAAS
- BKFABA
- BKFABB
- BKFABG
- BKFABH
- BKFABM
- BKFABP
- BKFABS
- BKFAGA
- BKFAGB
- BKFAGG
- BKFAGH
- BKFAGM
- BKFAGP
- BKFAGS
- BKFAHA
- BKFAHB
- BKFAHG
- BKFAHH
- BKFAHM
- BKFAHP
- BKFAHS
- BKFAMA
- BKFAMB
- BKFAMG
- BKFAMH
- BKFAMM
- BKFAMP
- BKFAMS
- BKFAPA
- BKFAPB
- BKFAPG
- BKFAPH
- BKFAPM
- BKFAPP
- BKFAPS
- BKFDAA
- BKFDAB
- BKFDAG
- BKFDAH
- BKFDAM
- BKFDAP
- BKFDAS
- BKFDBA
- BKFDBB
- BKFDBG
- BKFDBH
- BKFDBM
- BKFDBP
- BKFDBS
- BKFDGA
- BKFDGB
- BKFDGG
- BKFDGH
- BKFDGM
- BKFDGP
- BKFDGS
- BKFDHA
- BKFDHB
- BKFDHG
- BKFDHH
- BKFDHM
- BKFDHP
- BKFDHS
- BKFDMA
- BKFDMB
- BKFDMG
- BKFDMH
- BKFDMM
- BKFDMP
- BKFDMS
- BKFDPA
- BKFDPB
- BKFDPG
- BKFDPH
- BKFDPM
- BKFDPP
- BKFDPS
- CKFAAA
- CKFAAB
- CKFAAG
- CKFAAH
- CKFAAM
- CKFAAP
- CKFAAS
- CKFABA
- CKFABB
- CKFABG
- CKFABH
- CKFABM
- CKFABP
- CKFABS
- CKFAGA
- CKFAGB
- CKFAGG
- CKFAGH
- CKFAGM
- CKFAGP
- CKFAGS
- CKFAHA
- CKFAHB
- CKFAHG
- CKFAHH
- CKFAHM
- CKFAHP
- CKFAHS
- CKFAMA
- CKFAMB
- CKFAMG
- CKFAMH
- CKFAMM
- CKFAMP
- CKFAMS
- CKFAPA
- CKFAPB
- CKFAPG
- CKFAPH
- CKFAPM
- CKFAPP
- CKFAPS
- CKFDAA
- CKFDAB
- CKFDAG
- CKFDAH
- CKFDAM
- CKFDAP
- CKFDAS
- CKFDBA
- CKFDBB
- CKFDBG
- CKFDBH
- CKFDBM
- CKFDBP
- CKFDBS
- CKFDGA
- CKFDGB
- CKFDGG
- CKFDGH
- CKFDGM
- CKFDGP
- CKFDGS
- CKFDHA
- CKFDHB
- CKFDHG
- CKFDHH
- CKFDHM
- CKFDHP
- CKFDHS
- CKFDMA
- CKFDMB
- CKFDMG
- CKFDMH
- CKFDMM
- CKFDMP
- CKFDMS
- CKFDPA
- CKFDPB
- CKFDPG
- CKFDPH
- CKFDPM
- CKFDPP
- CKFDPS
- GKFAGG
- GKFAGH
- GKFAGM
- GKFAGP
- GKFAGS
- GKFAHG
- GKFAHH
- GKFAHM
- GKFAHP
- GKFAHS
- GKFAMG
- GKFAMH
- GKFAMM
- GKFAMP
- GKFAMS
- GKFAPG
- GKFAPH
- GKFAPM
- GKFAPP
- GKFAPS
- GKFDGG
- GKFDGH
- GKFDGM
- GKFDGP
- GKFDGS
- GKFDHG
- GKFDHH
- GKFDHM
- GKFDHP
- GKFDHS
- GKFDMG
- GKFDMH
- GKFDMM
- GKFDMP
- GKFDMS
- GKFDPG
- GKFDPH
- GKFDPM
- GKFDPP
- GKFDPS
- HKFA□□
- HKFD□□
- KFAAA
- KFAAB
- KFAAG
- KFAAH
- KFAAM
- KFAAP
- KFAAS
- KFABA
- KFABB
- KFABG
- KFABH
- KFABM
- KFABP
- KFABS
- KFAGA
- KFAGB
- KFAGG
- KFAGH
- KFAGM
- KFAGP
- KFAGS
- KFAHA
- KFAHB
- KFAHG
- KFAHH
- KFAHM
- KFAHP
- KFAHS
- KFAMA
- KFAMB
- KFAMG
- KFAMH
- KFAMM
- KFAMP
- KFAMS
- KFAPA
- KFAPB
- KFAPG
- KFAPH
- KFAPM
- KFAPP
- KFAPS
- KFDAA
- KFDAB
- KFDAG
- KFDAH
- KFDAM
- KFDAP
- KFDAS
- KFDBA
- KFDBB
- KFDBG
- KFDBH
- KFDBM
- KFDBP
- KFDBS
- KFDGA
- KFDGB
- KFDGG
- KFDGH
- KFDGM
- KFDGP
- KFDGS
- KFDHA
- KFDHB
- KFDHG
- KFDHH
- KFDHM
- KFDHP
- KFDHS
- KFDMA
- KFDMB
- KFDMG
- KFDMH
- KFDMM
- KFDMP
- KFDMS
- KFDPA
- KFDPB
- KFDPG
- KFDPH
- KFDPM
- KFDPP
- KFDPS
- SKFAAA
- SKFAAB
- SKFAAG
- SKFAAH
- SKFAAM
- SKFAAP
- SKFAAS
- SKFABA
- SKFABB
- SKFABG
- SKFABH
- SKFABM
- SKFABP
- SKFABS
- SKFAGA
- SKFAGB
- SKFAGG
- SKFAGH
- SKFAGM
- SKFAGP
- SKFAGS
- SKFAHA
- SKFAHB
- SKFAHG
- SKFAHH
- SKFAHM
- SKFAHP
- SKFAHS
- SKFAMA
- SKFAMB
- SKFAMG
- SKFAMH
- SKFAMM
- SKFAMP
- SKFAMS
- SKFAPA
- SKFAPB
- SKFAPG
- SKFAPH
- SKFAPM
- SKFAPP
- SKFAPS
- SKFDAA
- SKFDAB
- SKFDAG
- SKFDAH
- SKFDAM
- SKFDAP
- SKFDAS
- SKFDBA
- SKFDBB
- SKFDBG
- SKFDBH
- SKFDBM
- SKFDBP
- SKFDBS
- SKFDGA
- SKFDGB
- SKFDGG
- SKFDGH
- SKFDGM
- SKFDGP
- SKFDGS
- SKFDHA
- SKFDHB
- SKFDHG
- SKFDHH
- SKFDHM
- SKFDHP
- SKFDHS
- SKFDMA
- SKFDMB
- SKFDMG
- SKFDMH
- SKFDMM
- SKFDMP
- SKFDMS
- SKFDPA
- SKFDPB
- SKFDPG
- SKFDPH
- SKFDPM
- SKFDPP
- SKFDPS
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 7 Days or Less
- 9 Days or Less
- 10 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Large Head Locating Pins - Round shaped head, flat tip with groove, externally threaded shank.
- Locating Pin Holders - Round flange, flat tip for screw mounting, straight shank.
- Small Head Locating Pins - Plastic, round head and selectable tip, straight shank with metal center.
- Shoulder Locating Pins - Round head, tapered tip, internally threaded shank.
- Straight Push Pins in Inches - Ball tip, internally threaded shank.
- Retention Block Long Head Locating Pins - Bullet tip and internally threaded shank.
- Large Head Locating Pins - Round head, flat tip, straight shank (Hardened Stainless Steel).
- Small Head Locating Pins - Round or diamond shaped head, tapered tip, straight shank (hardened stainless steel).
Complementary Products
-
Locating Pins for Fixtures - Standard Grade, Shouldered, Threaded
MISUMI Days to Ship : 8 Days or more
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy