(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Locating pins with �4 or less pin diameter. Selectable from 4 different tip shapes.
Part Number
Configured Part Number is shown.
Part Number | [ M ]Material | [ H ]Hardness | ||
Insertion Guide Shape | Type | Material Code | ||
SF (Flat) SP (Sphere) ST (Taper R) SX (Tapered) | KH (L Selectable) SH (L Configurable) PH (L Configurable and Tolerance Selectable) | T | W1-9 Tool Steel | Treated Hardness: 50~58HRC |
S | 304 Stainless Steel | - | ||
SG | 304 Stainless Steel (SR Parts Polished) | - | ||
DG | H13 Tool Steel (SR Parts Polished) | Treated Hardness: 40~52HRC | ||
C | 440C or 420 Stainless Steel | Treated Hardness: 50~55HRC |
Part Number | - | D | - | L |
SPKHT | - | D2 | - | L5 |
Part Number | - | D | - | L | - | P | - | B | - | E | |
SPSHS SXSHT | - - | D1.5 D1.5 | - - | L10.0 L10.0 | - - | P0.9 P1.2 | - - | B1.5 B2.0 | - | E1.0 | (Sphere) (Tapered) |
Part Number | - | D | - | L | - | P | - | B | - | E | |||||
Type | D Tol. | P Tol. | |||||||||||||
SPPHT SXPHS | Q P | R P | - - | D1.50 D1.50 | - - | L10.1 L10.0 | - - | P0.95 P1.20 | - - | B5.3 B3.0 | - | E1.0 | (Sphere) (Tapered) |
Part Number | D | D Tolerance | L | P | P Tolerance | B | |||||
Insertion Guide Shape | Type | Material Code | |||||||||
SP (Sphere) | KH | T S | 2 | 0 -0.005 | 3 | 5 | 10 | 0.95 | 0 -0.01 | 2 | |
3 | 3 | 8 | 10 | 1.95 | 4 |
Part Number | D 0.1mm Increment | D Tolerance | L 0.5mm Increment | P 0.1mm Increment | P Dimension Tolerance | B 0.5mm Increment | E 0.5mm Increment | R | |||
Insertion Guide Shape | Type | Material Code | |||||||||
SF (Flat) SP (Sphere) | ST (Taper R) SX (Tapered) | SH | T S SG DG C | 1.0~2.0 | 0 -0.005 | 3.0~20.0 | 0.9~1.9 (D>P) | 0 - 0.01 | 1.5~10.0 (B-P/2≥1.0) | 0.5~2.5 | 0.2 |
2.1~3.0 | 1.9~2.9 (D>P) | 0.4 |
Part Number | D 0.01mm Increment | L 0.1mm Increment | P 0.01mm Increment | B 0.1mm Increment | E 0.5mm Increment | R | |||||
Insertion Guide Shape | Type | Material Code | D Tolerance | P Tolerance | |||||||
SF (Flat) SP (Sphere) | ST (Taper R) SX (Tapered) | PH | T S C | P +0.005 0 Q ±0.002 R 0 -0.005 H 0 -0.01 | P +0.005 0 Q ±0.002 R 0 -0.005 H 0 -0.01 | 0.51~1.00 | 3.0~20.0 | 0.50~0.99 (D>P) | 1.5~5.0 (B-P/2≥1.0) | 0.5~2.5 | - |
1.01~2.00 | 0.50~1.99 (D>P) | 1.5~10.0 (B-P/2≥1.0) | 0.2 | ||||||||
2.01~3.00 | 1.00~2.99 (D>P) | 0.4 |
D | Unit Price | |
Sphere | ||
SPKHT | SPKHS | |
2 | 540 | 660 |
3 | 540 | 660 |
D | Unit Price | |||||||||||||
Flat | Sphere | Taper R Type | Tapered | |||||||||||
SFSHT | SFSHS | SFSHC | SPSHT | SPSHS | SPSHSG | SPSHDG | SPSHC | STSHT | STSHS | STSHC | SXSHT | SXSHS | SXSHC | |
1.0~2.0 | 1,150 | 1,490 | 1,800 | 1,200 | 1,560 | 2,480 | 1,930 | 1,880 | 1,310 | 1,700 | 2,050 | 1,180 | 1,560 | 1,880 |
2.1~3.0 | 760 | 990 | 1,200 | 800 | 1,040 | 1,920 | 1,540 | 1,250 | 870 | 1,130 | 1,360 | 760 | 1,000 | 1,210 |
D | Unit Price | |||||||||||
Flat | Sphere | Taper R Type | Tapered | |||||||||
SFPHT | SFPHS | SFPHC | SPPHT | SPPHS | SPPHC | STPHT | STPHS | STPHC | SXPHT | SXPHS | SXPHC | |
0.51~1.00 | 1,790 | 2,340 | - | 1,830 | 2,390 | - | - | - | - | - | - | - |
1.01~2.00 | 1,530 | 1,990 | 2,400 | 1,560 | 2,040 | 2,450 | 1,560 | 2,040 | 2,450 | 1,340 | 1,710 | 2,050 |
2.01~3.00 | 1,020 | 1,320 | 1,600 | 1,040 | 1,360 | 1,640 | 1,040 | 1,360 | 1,640 | 900 | 1,240 | 1,500 |
Quantity | 1~19 | 20~34 | 35~49 | 50~99 |
Discount Rate | Unit Price | 5% | 10% | 18% |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
SFPHCRH-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SFPHCRP-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SFPHCRQ-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SFPHCRR-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SFPHSRH-D[0.51-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SFPHSRP-D[0.51-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SFPHSRQ-D[0.51-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SFPHSRR-D[0.51-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SFPHTRH-D[0.51-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SFPHTRP-D[0.51-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SFPHTRQ-D[0.51-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SFPHTRR-D[0.51-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SFSHC-D[1-3/0.1]-L[3-20/0.5]-P[0.9-2.9/0.1]-B[1.5-10/0.5] |
SFSHS-D[1-3/0.1]-L[3-20/0.5]-P[0.9-2.9/0.1]-B[1-10/0.5] |
SFSHT-D[1-3/0.1]-L[3-20/0.5]-P[0.9-2.9/0.1]-B[1-10/0.5] |
SPKHS-D[2,3]-L[3,5,8,10] |
SPKHT-D[2,3]-L[3,5,8,10] |
SPPHCRH-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SPPHCRP-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SPPHCRQ-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SPPHCRR-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SPPHSRH-D[0.51-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SPPHSRP-D[0.51-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SPPHSRQ-D[0.51-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SPPHSRR-D[0.51-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SPPHTRH-D[0.51-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SPPHTRP-D[0.51-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SPPHTRQ-D[0.51-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SPPHTRR-D[0.51-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
SPSHC-D[1-3/0.1]-L[3-20/0.5]-P[0.9-2.9/0.1]-B[1.5-10/0.5] |
SPSHDG-D[1-3/0.1]-L[3-20/0.5]-P[0.9-2.9/0.1]-B[1-10/0.5] |
SPSHS-D[1-3/0.1]-L[3-20/0.5]-P[0.9-2.9/0.1]-B[1-10/0.5] |
SPSHSG-D[1-3/0.1]-L[3-20/0.5]-P[0.9-2.9/0.1]-B[1-10/0.5] |
SPSHT-D[1-3/0.1]-L[3-20/0.5]-P[0.9-2.9/0.1]-B[1-10/0.5] |
STPHCRH-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
STPHCRP-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
STPHCRQ-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
STPHCRR-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
STPHSRH-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
STPHSRP-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
STPHSRQ-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
STPHSRR-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
STPHTRH-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
STPHTRP-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
STPHTRQ-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
STPHTRR-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1] |
STSHC-D[1-3/0.1]-L[3-20/0.5]-P[0.9-2.9/0.1]-B[1.5-10/0.5] |
STSHS-D[1-3/0.1]-L[3-20/0.5]-P[0.9-2.9/0.1]-B[1.5-10/0.5] |
STSHT-D[1-3/0.1]-L[3-20/0.5]-P[0.9-2.9/0.1]-B[1.5-10/0.5] |
SXPHCRH-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1]-E[0.5-2.5/0.5] |
SXPHCRP-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1]-E[0.5-2.5/0.5] |
SXPHCRQ-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1]-E[0.5-2.5/0.5] |
SXPHCRR-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1]-E[0.5-2.5/0.5] |
SXPHSRH-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1]-E[0.5-2.5/0.5] |
SXPHSRP-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1]-E[0.5-2.5/0.5] |
SXPHSRQ-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1]-E[0.5-2.5/0.5] |
SXPHSRR-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1]-E[0.5-2.5/0.5] |
SXPHTRH-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1]-E[0.5-2.5/0.5] |
SXPHTRP-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1]-E[0.5-2.5/0.5] |
SXPHTRQ-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1]-E[0.5-2.5/0.5] |
Loading...
Product Name | Feature | Catalog |
---|---|---|
Small Diameter Locating Pins | Locating Pins with Ø4 or less diameter suitable for small works. | Click here |
Locating Pins for Height Adjusting | Locating Pins with short head for thin PC boards. | Click here |
Nonmagnetic Locating Pins | Nonmagnetic Aluminum locating pins suitable for environments where magnetism must be avoided. | Click here |
Plastic Locating Pins | Plastic Locating Pins prevent work damages. | Click here |
Height Adjusting Pins | Locating Pins suitable for locating in vertical direction. | Click here |
Support Pins | Pins for use in higher position to avoid interferences. | Click here |
Basic Shape | Small Head | Head Shape | Round | Drive | No |
---|---|---|---|---|---|
Shank Style | Straight(Press Fit) | Surface Finish | No |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy