(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 p.m. 11/23/2024 to 5:00 p.m. (CST) 11/24/2024. We apologize for the inconvenience.
Collars - Straight, configurable dimensions and tolerances.
- Lead Time Reduction
•Shape: Straight
•Bore Style: Straight
•Quantity: Single Piece
•Thickness/Length Tolerance: 0～-0.1
•Dimension Configurable Method: Dimension Configurable
- METRIC
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
| Part Number | [ M ] Material | [ S ]Surface Treatment | |
| Standard Grade | Precision Grade | ||
| SNCC | SNMC | 1045 Carbon Steel | - |
| SNCB | SNMB | Black Oxide | |
| SNCM | SNMM | Electroless Nickel Plating | |
| SNCS | SNMS | 304 Stainless Steel | - |
Specifications
| Part Number | - | Tolerance Selection | - | V | - | D | - | L | ||
| D | V | |||||||||
| SNCS | - | G | H | - | V10.0 | - | D25 | - | L50.5 | |
| Part Number | - | Tolerance Selection | - | V | - | D | - | L | ||
| D | V | |||||||||
| SNMS | - | G | H | - | V10.0 | - | D25 | - | L50.5 | |
| D | [ T ] D Tolerance | |||
| G | H | N | X | |
| g6 | h7 | - | - | |
| 5.0~8.5 | - | - | -0.1 -0.3 | 0 -0.2 |
| 9.0~10.0 | -0.005 | 0 | ||
| -0.014 | -0.015 | |||
| 10.5~18.0 | -0.006 | 0 | ||
| -0.017 | -0.018 | |||
| 18.5~30 | -0.007 | 0 | ||
| -0.020 | -0.021 | |||
| 31~50 | -0.009 | 0 | ||
| -0.025 | -0.025 | |||
| 51~60 | -0.010 | 0 | ||
| -0.029 | -0.030 | |||
| D (O.D.) | V (I.D.) | Price No. |
| G | H | ② |
| N | ① | |
| X | ① | |
| H | H | ② |
| N | ① | |
| X | ① | |
| N | H | ① |
| N | ③ | |
| X | ③ | |
| X | H | ① |
| N | ③ | |
| X | ③ |
Ex.> When ordering Material 1045 Carbon Steel, O.D. g6, I.D. H7 and L Tolerance ±0.01
Part Number: SNMC−GH−V4.0−D10.0−L10.0
1. Check the I.D./O.D. Tolerance Price Number List. (GH is Price No.②)
2. In the price list of precision grade
Find the column of I.D./O.D. tolerance price No.② shown in the price list of precision grade.
| V | [ T ] V Tolerance | ||
| H | N | X | |
| H7 | - | - | |
| 3.0 | +0.010 | +0.3 +0.1 | +0.2 0 |
| 0 | |||
| 3.5~6.0 | +0.012 | ||
| 0 | |||
| 6.5~10.0 | +0.015 | ||
| 0 | |||
| 10.5~18.0 | +0.018 | ||
| 0 | |||
| 18.5~30.0 | +0.021 | ||
| 0 | |||
| 30.5~50.0 | +0.025 | ||
| 0 | |||
| 50.5~58.0 | +0.030 | ||
| 0 | |||
| Part Number | D Tolerance | V Tolerance | V 0.5mm Increment | D | L 0.1mm Increment | |||||||
| SNCC SNCB SNCM SNCS | G H N X | H N X | 3.0~58.0 (V≤D-2) [ ! ]Refer to the following. | 5.0~10.0 0.5mm Increment | 10.0~25.0 | |||||||
| 25.1~50.0 | ||||||||||||
| 50.1~64.0 | ||||||||||||
| 10.5~20.0 0.5mm Increment | 10.0~25.0 | |||||||||||
| 25.1~50.0 | ||||||||||||
| 50.1~75.0 | ||||||||||||
| 75.1~100.0 | ||||||||||||
| 21~30 1mm Increment | 10.0~25.0 | |||||||||||
| 25.1~50.0 | ||||||||||||
| 50.1~75.0 | ||||||||||||
| 75.1~100.0 | ||||||||||||
| 31~40 1mm Increment | 10.0~25.0 | |||||||||||
| 25.1~50.0 | ||||||||||||
| 50.1~75.0 | ||||||||||||
| 75.1~100.0 | ||||||||||||
| 41~50 1mm Increment | 10.0~25.0 | |||||||||||
| 25.1~50.0 | ||||||||||||
| 50.1~75.0 | ||||||||||||
| 75.1~100.0 | ||||||||||||
| 51~60 1mm Increment | 10.0~25.0 | |||||||||||
| 25.1~50.0 | ||||||||||||
| 50.1~75.0 | ||||||||||||
| 75.1~100.0 | ||||||||||||
| [ ! ]D≥9 is applicable when G or H is selected as the tolerance values of D and V. The dimension range of V is shown in the table below.
| [ ! ]Machining Limits of V and Overall Length L≤Vx8 | [ ! ]When H is selected as the tolerance values of D and V, and L≥Vx4 when V≥8, a middle relief is added.  | ||||||||||
| Part Number | D Tolerance | V Tolerance | V 0.5mm Increment | D | L 0.1mm Increment | |||||||
| SNMC SNMB SNMM SNMS | G H N X | H N X | 3.0~58.0 (V≤D-2) [ ! ]Refer to the following. | 5.0~10.0 0.5mm Increment | 10.0~25.0 | |||||||
| 25.1~50.0 | ||||||||||||
| 50.1~64.0 | ||||||||||||
| 10.5~20.0 0.5mm Increment | 10.0~25.0 | |||||||||||
| 25.1~50.0 | ||||||||||||
| 50.1~75.0 | ||||||||||||
| 75.1~100.0 | ||||||||||||
| 21~30 1mm Increment | 10.0~25.0 | |||||||||||
| 25.1~50.0 | ||||||||||||
| 50.1~75.0 | ||||||||||||
| 75.1~100.0 | ||||||||||||
| 31~40 1mm Increment | 10.0~25.0 | |||||||||||
| 25.1~50.0 | ||||||||||||
| 50.1~75.0 | ||||||||||||
| 75.1~100.0 | ||||||||||||
| 41~50 1mm Increment | 10.0~25.0 | |||||||||||
| 25.1~50.0 | ||||||||||||
| 50.1~75.0 | ||||||||||||
| 75.1~100.0 | ||||||||||||
| 51~60 1mm Increment | 10.0~25.0 | |||||||||||
| 25.1~50.0 | ||||||||||||
| 50.1~75.0 | ||||||||||||
| 75.1~100.0 | ||||||||||||
| [ ! ]D≥9 is applicable when G or H is selected as the tolerance values of D and V. The dimension range of V is shown in the table below.
| [ ! ]Machining Limits of V and Overall Length L≤Vx8 | [ ! ]When H is selected as the tolerance values of D and V, and L≥Vx4 when V≥8, a middle relief is added. | ||||||||||
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| SNCB-GH-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNCB-GH-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNCB-GN-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNCB-GN-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNCB-GX-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNCB-GX-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNCC-GH-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNCC-GH-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNCC-GN-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNCC-GN-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNCC-GX-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNCC-GX-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNCM-GH-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNCM-GH-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNCM-GN-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNCM-GN-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNCM-GX-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNCM-GX-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNCS-GH-V[3-58/0.5]-D[5-20/0.5]-L[10-100/0.1] |
| SNCS-GH-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNCS-GN-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNCS-GN-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNCS-GX-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNCS-GX-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNMB-GH-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNMB-GH-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNMB-GN-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNMB-GN-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNMB-GX-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNMB-GX-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNMC-GH-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNMC-GH-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNMC-GN-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNMC-GN-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNMC-GX-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNMC-GX-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNMM-GH-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNMM-GH-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNMM-GN-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNMM-GN-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNMM-GX-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNMM-GX-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNMS-GH-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNMS-GH-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNMS-GN-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNMS-GN-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
| SNMS-GX-V[3-58/0.5]-D[9-20/0.5]-L[10-100/0.1] |
| SNMS-GX-V[3-58/0.5]-D[21-60/1]-L[10-100/0.1] |
Loading...
Basic Information
| Shape | Straight | Bore Style | Straight | Quantity | Sold by Single Unit |
|---|---|---|---|---|---|
| Dimensions Configurable Method | Dimension Configurable | Hardness(HRC) | No Hardened |
Specification/Dimensions
-
Outer Diameter D(mm)
-
Inner Dia.(mm)
-
Thickness / Length(mm)
-
Material
- Steel
- Stainless Steel
- Steel
-
Surface Finish
- No
- Black Oxide
- Electroless Nickel Plating
-
Inner Dia. Tolerance
- H7
- +0.2~0
- +0.3~+0.1
-
Thickness / Length Tolerance
- 0~-0.1
-
Accuracy
- Precision Grade
- Standard Grade
-
type
- SNCB-GH
- SNCB-GN
- SNCB-GX
- SNCB-HH
- SNCB-HN
- SNCB-HX
- SNCB-NH
- SNCB-NN
- SNCB-NX
- SNCB-XH
- SNCB-XN
- SNCB-XX
- SNCC-GH
- SNCC-GN
- SNCC-GX
- SNCC-HH
- SNCC-HN
- SNCC-HX
- SNCC-NH
- SNCC-NN
- SNCC-NX
- SNCC-XH
- SNCC-XN
- SNCC-XX
- SNCM-GH
- SNCM-GN
- SNCM-GX
- SNCM-HH
- SNCM-HN
- SNCM-HX
- SNCM-NH
- SNCM-NN
- SNCM-NX
- SNCM-XH
- SNCM-XN
- SNCM-XX
- SNCS-GH
- SNCS-GN
- SNCS-GX
- SNCS-HH
- SNCS-HN
- SNCS-HX
- SNCS-NH
- SNCS-NN
- SNCS-NX
- SNCS-XH
- SNCS-XN
- SNCS-XX
- SNMB-GH
- SNMB-GN
- SNMB-GX
- SNMB-HH
- SNMB-HN
- SNMB-HX
- SNMB-NH
- SNMB-NN
- SNMB-NX
- SNMB-XH
- SNMB-XN
- SNMB-XX
- SNMC-GH
- SNMC-GN
- SNMC-GX
- SNMC-HH
- SNMC-HN
- SNMC-HX
- SNMC-NH
- SNMC-NN
- SNMC-NX
- SNMC-XH
- SNMC-XN
- SNMC-XX
- SNMM-GH
- SNMM-GN
- SNMM-GX
- SNMM-HH
- SNMM-HN
- SNMM-HX
- SNMM-NH
- SNMM-NN
- SNMM-NX
- SNMM-XH
- SNMM-XN
- SNMM-XX
- SNMS-GH
- SNMS-GN
- SNMS-GX
- SNMS-HH
- SNMS-HN
- SNMS-HX
- SNMS-NH
- SNMS-NN
- SNMS-NX
- SNMS-XH
- SNMS-XN
- SNMS-XX
-
Outer Dia. Tolerance
- g6
- h7
- -0.1~-0.3
- 0~-0.2
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 9 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Washers - Metal, precision, configurable.
- Washers - Metal, threaded.
- Metal Washers - Slit hole, straight or with shoulder.
- Metal Washers - Precision standard dimensions (inches).
- Spacers - Straight, configurable, (inches).
- Metal Washers - Hardened, configurable.
- Metal Washers - Bulk packs.
- Flat Washers - Case.
Complementary Products
-
Hex Socket Cap Screw - M4 - M10, Coarse, Configurable Length, Partially Threaded
MISUMI Days to Ship : 9 Days or more
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy