(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Miniature Linear Guides - Extra long block.

Miniature Linear Guides - Extra long block.

Miniature stainless steel linear guides with extra long block. Its length gives it a greater load and allowable moments. Selectable preload, precision and lubricant. Blocks and rails cannot be purchased separately.

  • inCAD Components

(i)Caution

  • The appearance of this product has changed as of September 2017.
    About Misumi Linear Guide Exterior Change
  • Delivery times for some of our products may be delayed as national government authorities have imposed limit of capacity at our production sites.

PDFP.2019-626

Unit examples related to this product
Miniature Linear Guides - Extra Long Block, Light Preload, Advanced Class, L Configurable Type:Related Image
[ ! ]For L Dimension Configurable Type, G dimensions differ from those shown in the table below. For details, see >> Click here.
・Materials
[ M ] Material
[ H ] Hardness
TypeMX
(Lubrication Unit)
L Dimension
Light PreloadSlight Clearance
High GradeStandard Grade
Standard MaterialsStainless Steel
56HRC~
SSECBSSECBZBlank: None
-MX: Provided
Selectable
SSECBLSSECBLZConfigurable
 Carbon Steel
58HRC~
SECBSECBZ-Selectable
SECBLSECBLZConfigurable
Heat Resistant Temperature: -20 ~ 80°C

Specifications


For L Dimension Configurable Type, G dimensions differ from those shown in the table below. For details, see >> Click here.
 
Part NumberLBlock DimensionDowel Hole DimensionsGuide Rail Dimension
TypeMXHWL1BCSxℓL2KCbNC2(ℓ1)W1W2H1CaCounterbored HoleFG
d1xd2xh
SSECB
SSECBL
SSECBZ
SSECBLZ
-840~1301737.51220M2x2.527.56.50.38.5202754.70.32.4x4.2x2.3155
Blank: None
-MX: Provided
1055~2752049.61526M3x338.67.80.310262.595.55.50.33.5x6x3.5207.5
1370~4702754.82030M3x3.540.8100.513.5303127.57.50.53.5x6x4.52510
16110~6703270.32540M3x455.3120.516404158.59.50.53.5x6x4.54015
 

Materials

Material
Hardness
TypeMX
(Lubrication Unit)
L Dimension
Light PreloadSlight Clearance
High GradeStandard Grade
Stainless Steel
56HRC~
SSECBSSECBZBlank: None
-MX: Provided
Selectable
SSECBLSSECBLZConfigurable
Heat Resistant Temperature: -20 ~ 80°C
 
Part Number-L 
SSECB10
Miniature Linear Guides - Extra Long Block, Light Preload, Advanced Class, L Configurable Type:Related ImageSSECB10L
Miniature Linear Guides - Extra Long Block, Light Preload, Advanced Class, L Configurable Type:Related ImageSSECB10G
-
-
-
275
75
75

(L Type Greased)
(G Type Greased)
Alternative grease types available.
For Days to Ship, Price and Performance >> Click here
Blocks and rails are not sold as separate items. This Type has guaranteed radial clearances and accuracies as sets of blocks and rails.
■Precautions for Use
Blocks are equipped with retainers (wire) to prevent balls from derailing. For blocks, refer to >> Click here.
Radial clearances and accuracies are not guaranteed if the blocks and rails are interchanged from the original set combinations.
Straight grooves are provided on datum planes. Be sure to match the datum lines when using.
Rails cannot be connected end to end.
Running parallelism is the value measured after the rail is mounted (it is not the value measured before the rails are fastened with screws.).
■Accessories
· H8 comes with cap screws (M2x6).

■Others
· Filled with Lithium soap based grease (Multemp Grease PS2 by Kyodo Yushi Co., Ltd. ).
· For Operating Life Calculation >> Click here
· The MX type is greased with a lithium complex grease (TOUGHLIX GREASE MP2, made by JXTG Nippon Oil & Energy Corporation).

Price list

Volume Discount Rate ([ ! ]Round down to nearest one cent.) P.89
Quantity1~45~1011~1516 or More
Discount RateUnit Price5%10%18%
Days to ShipStandard3 additional daysTo Be Quoted

HLUnit Price
Stainless SteelCarbon Steel
SSECBSSECBZSECBSECBZ
8403,5203,3103,2702,740
553,7603,5403,4902,930
704,0103,7603,7203,120
854,2704,0003,9603,320
1004,5104,2304,1903,510
1154,7504,4704,4203,710
1305,0004,7004,6403,900
10554,6804,3704,3403,630
754,9204,6104,5503,830
955,2204,8904,8304,060
1155,5805,2305,1604,330
1355,8905,5305,4604,590
1556,2505,8505,7904,860
1756,6406,2306,1705,170
1957,0606,6306,5605,500
2157,4907,0306,9605,830
2357,9607,4807,4006,210
2558,4507,9307,8406,580
2758,9408,4008,3106,970
13705,3205,2604,9104,370
955,6805,6305,2704,670
1206,0405,9805,6204,970
1456,4206,3505,9705,270
1706,7806,7206,3105,570
1957,1607,0906,6705,880
2207,5707,4807,0406,210
2457,9707,8907,4206,550
2708,4408,3507,8606,930
2958,9008,8108,3007,320
3209,4409,3508,8007,760
3459,9409,8509,2708,170
37010,68010,5709,9608,780
39511,25011,15010,4809,260
42011,94011,82011,1109,810
44512,59012,47011,72010,350
47013,16013,05012,31010,830
161106,8406,6906,3705,700
1507,3307,1906,8306,120
1907,8307,6707,2906,520
2308,4208,2307,8507,010
2709,1909,0008,5607,660
31010,1309,9209,4508,440
35010,87010,65010,1409,070
39011,49011,26010,7109,580
43012,26012,02011,42010,230
47013,19012,92012,30011,000
51014,06013,76013,08011,710
55014,97014,66013,94012,480
59016,19015,85015,10013,490
63017,33016,98016,16014,450
67018,51018,12017,29015,430
■L Dimension Configurable Type (1mm Increment)
HUnit Price
Stainless SteelCarbon Steel
SSECBLSSECBLZSECBLSECBLZ
8800800700700
10900900800800
131,1001,1001,0001,000
161,2001,2001,1001,100

Alterations

Miniature Linear Guides - Extra Long Block, Light Preload, Advanced Class, L Configurable Type:Related Image

More Information

Miniature Linear Guides - Extra Long Block, Light Preload, Advanced Class, L Configurable Type:Related Image
Miniature Linear Guides - Extra Long Block, Light Preload, Advanced Class, L Configurable Type:Related Image
see >> Click here
Miniature Linear Guides - Extra Long Block, Light Preload, Advanced Class, L Configurable Type:Related Image
Miniature Linear Guides - Extra Long Block, Light Preload, Advanced Class, L Configurable Type:Related Image
Linear Guide Clamps >> Click here
Rail Height Adjusting Blocks >> Click here
■Stopper Bolts >> Click here
■Rail Push Plates >> Click here
■Linear Locks >> Click here
■Linear Guide Lock Units >> Click here

Technical Information

Characteristics of Linear Guides

  • Linear guides utilize steel balls that roll on ground raceways, and the balls are recirculated using plastic return caps.
  • End seals prevent foreign materials from entering into the blocks.
  • Load ratings are the same for all four directions (radial, reverse-radial, and lateral directions). Can be used in any orientation.

Preload (Radial Clearance)

Type of guidePreloadHeight H
Dimension
Radial Clearance
(µm)
Miniature Linear GuideLight Preload6 ~ 20-3 ~ 0
Slight Clearance0 ~ 15
  • Clearance and preload of MISUMI Linear Guides are controlled with minute ball size adjustments.
  • Increased rigidity and reduced elastic deformation will result by preloading (negative clearance).
  • In general, selecting some preloads would have a positive effect on the accuracy and service life of the Linear Guides.
  • Blocks and rails manufactured by MIUSMI guarantee their own radial clearance (preload) and accuracy as sets of blocks and rails. Be sure to use the blocks and rails in sets.

Types of Greases

The following types of greases are used in MISUMI linear guides.

GreaseLinear GuideGrease ModelFeatures
StandardMiniatureMultemp Grease PS2 (Manufactured by Kyodo Yushi)Grease with excellent low temperature and low torque properties.
Miniature with MX lubrication unitTufflix MP2 (Manufactured by JX Nippon Oil & Energy)Reduces temperature rise in the bearing area; extends bearing life and reduces grease replenishment interval and maintenance work.
Medium Load
Heavy Load
Albania Grease S2 (Manufactured by Showa Shell Sekiyu)It has excellent lubrication and shows excellent performance under normal and heavy load conditions.
Type LMiniature/Medium/Heavy LoadET-100K (Manufactured by Kyodo Yushi)It has excellent heat resistance, oxidation stability, adhesion and tackiness.
It is also a low dispersion, low leakage grease.
Type GLG2 (Manufactured by NSK Ltd.)It produces little dust and has excellent wear resistance and rust resistance properties.

Maintenance

The grease forms an oil film on the steel balls and on the slideways of the linear guide, reducing friction.

Loss and deterioration of the grease will greatly affect the service life of the linear guide, so it must be lubricated on time depending on the conditions of use.

MISUMI linear guides are lubricated with standard grease at the time of shipment, so they can be used as is.

Recommended lubrication intervals

Lubricate every 6 months. If linear guide is used for long distances, it is recommended to lubricate every 3 months, or if it is used more than 1000 km in a period, we recommend every 1000 km.

*The above is the distance-based lubrication interval. If the grease deteriorates or is heavily contaminated due to the operating environment, it may be necessary to shorten the lubrication interval.

By using a lubrication unit, it is possible to extend the lubrication interval considerably.

MX Lubrication Units

Features

Long-term Maintenance-Free Condition

The special polyurethane in MX Lubrication Unit impregnates grease, and its micropore structure provides an optimal amount of grease on the raceway surface. A constant oil film is formed between steel balls and the raceway, enabling long-term maintenance-free operation.

Cost Benefit

Extended lubrication intervals result in reduce maintenance cost.

Short Lead Time

Ship time is the same as that of standard products.

Structure

Special polyurethane (yellow color) has interconnected micropores and has excellent water-holding capacity. This allows the unit to hold more grease.

Test Results

The linear guides with MX lubrication unit achieved 2,000 km of travel, more than the standard units without grease

Test conditions

SampleSXR24
Load2.87 kN
Travel speed750 mm/sec

- No grease: degreased linear guide

- No grease + MX: degreased linear guide equipped with MX only MX is filled with Alvania Grease S2 by Showa Shell Sekiyu K.K.

[!] Test results are for reference only and are not guaranteed

Permissible loads

HBasic Load RatingAllowable Static MomentMass
C (Dynamic)Co (Static)MAMBMCBlockGuide Rails
81.53.310.110.112.40.020.19
102.5518.818.823.70.040.31
133.67.6343447.30.070.61
166.913.580.780.7104.30.121.02

kgf = N ・ 0.101972

kgf = kilograms force, N = Newton

Support Information

Shelf Life Information

For more information about the calculation of useful life, click here.

Mounting Hole Information

For more information about mounting holes and G-value, click here.

Installation Information

For more information about the installation click here.

Cautions

If the linear guides are handled incorrectly, the quality may deteriorate. When using MISUMI linear guides, consider the following points:

Be careful when removing the blocks

MISUMI linear guidesare equipped with a retainer, so that the balls will not fall out even if the block is removed from the rail. However, if the block is removed from the rail at high speed or inserted at an angle, the balls may fall out. Be careful when removing and installing the blocks.

Blocks and rails not sold separately

Linear guides MISUMI are only sold as a block and rail assembly. For resin retainer type only, blocks and rails can be purchased separately.

Please do not replace with another product

The radial clearance and accuracy of MISUMI linear guides are guaranteed as a block and rail assembly, so the accuracy is not guaranteed when combined with another product.

Please check the reference surface before installation.

Linear guides have reference planes on both the rail and the block (the side with a straight groove is provided). When installing the linear guide, correctly align this reference surface with the mounting reference surface of the table and base and secure it. For more details, refer to"Installation" in "Support Information".

Please do not add rails

MISUMI linear guides are shipped with chamfered edges on the end of the rail. The use of additional rails is not covered under warranty.

Secure all rail mounting holes.

The rail curvature is corrected with all mounting holes clamped. Accuracy is guaranteed under these conditions.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
SSECB8-[40,​55,​70,​85,​100,​115,​130]
SSECB8G-[40,​55,​70,​85,​100,​115,​130]
SSECB8L-[40,​55,​70,​85,​100,​115,​130]
SSECB10-[55,​75,​95,​115,​135,​155,​175,​195,​215,​235,​255,​275]
SSECB10G-[55,​75,​95,​115,​135,​155,​175,​195,​215,​235,​255,​275]
SSECB10L-[55,​75,​95,​115,​135,​155,​175,​195,​215,​235,​255,​275]
SSECB13-[70,​95,​120,​145,​170,​195,​220,​245,​270,​295,​320,​345,​370,​395,​420,​445,​470]
SSECB13G-[70,​95,​120,​145,​170,​195,​220,​245,​270,​295,​320,​345,​370,​395,​420,​445,​470]
SSECB13L-[70,​95,​120,​145,​170,​195,​220,​245,​270,​295,​320,​345,​370,​395,​420,​445,​470]
SSECB16-[110,​150,​190,​230,​270,​310,​350,​390,​430,​470,​510,​550,​590,​630,​670]
SSECB16G-[110,​150,​190,​230,​270,​310,​350,​390,​430,​470,​510,​550,​590,​630,​670]
SSECB16L-[110,​150,​190,​230,​270,​310,​350,​390,​430,​470,​510,​550,​590,​630,​670]
SSECBL8-[41-129/1]
SSECBL8G-[41-129/1]
SSECBL8L-[41-129/1]
SSECBL10-[56-274/1]
SSECBL10G-[56-274/1]
SSECBL10L-[56-274/1]
SSECBL13-[71-469/1]
SSECBL13G-[71-469/1]
SSECBL13L-[71-469/1]
SSECBL16-[111-669/1]
SSECBL16G-[111-669/1]
SSECBL16L-[111-669/1]
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSRail Width W1
(mm)
Unit Height H
(mm)
Rail Length L
(mm)
Preload Accuracy Nominal Part Number Basic Load Rating: Dynamic Load
(N)
Basic Load Rating: Static Load
(N)
Allowable Static Moment MA
(N⋅m)
Allowable Static Moment MB
(N⋅m)
Allowable Static Moment MC
(N⋅m)
Lubrication Type L Dimension Type
1 Piece(s)

12 Days or more

107840 ~ 130[Light Preload] Light PreloadHigh Grade71500330010.110.112.4Lithium Base Grease (Standard)Standard Type
1 Piece(s)

12 Days or more

107840 ~ 130[Light Preload] Light PreloadHigh Grade71500330010.110.112.4Special Grease (Clean Room) - G TypeStandard Type
1 Piece(s)

12 Days or more

107840 ~ 130[Light Preload] Light PreloadHigh Grade71500330010.110.112.4Special Grease (Heat Resistant) - L TypeStandard Type
1 Piece(s)

12 Days or more

1091055 ~ 275[Light Preload] Light PreloadHigh Grade92500500018.818.823.7Lithium Base Grease (Standard)Standard Type
1 Piece(s)

12 Days or more

1091055 ~ 275[Light Preload] Light PreloadHigh Grade92500500018.818.823.7Special Grease (Clean Room) - G TypeStandard Type
1 Piece(s)

12 Days or more

1091055 ~ 275[Light Preload] Light PreloadHigh Grade92500500018.818.823.7Special Grease (Heat Resistant) - L TypeStandard Type
1 Piece(s)

12 Days or more

10121370 ~ 470[Light Preload] Light PreloadHigh Grade123600760034.03447.3Lithium Base Grease (Standard)Standard Type
1 Piece(s)

12 Days or more

10121370 ~ 470[Light Preload] Light PreloadHigh Grade123600760034.03447.3Special Grease (Clean Room) - G TypeStandard Type
1 Piece(s)

12 Days or more

10121370 ~ 470[Light Preload] Light PreloadHigh Grade123600760034.03447.3Special Grease (Heat Resistant) - L TypeStandard Type
1 Piece(s)

12 Days or more

101516110 ~ 670[Light Preload] Light PreloadHigh Grade1569001350080.780.7104.3Lithium Base Grease (Standard)Standard Type
1 Piece(s)

12 Days or more

101516110 ~ 670[Light Preload] Light PreloadHigh Grade1569001350080.780.7104.3Special Grease (Clean Room) - G TypeStandard Type
1 Piece(s)

12 Days or more

101516110 ~ 670[Light Preload] Light PreloadHigh Grade1569001350080.780.7104.3Special Grease (Heat Resistant) - L TypeStandard Type
1 Piece(s)

12 Days or more

107841 ~ 129[Light Preload] Light PreloadHigh Grade71500330010.110.112.4Lithium Base Grease (Standard)Configurable Type
1 Piece(s)

12 Days or more

107841 ~ 129[Light Preload] Light PreloadHigh Grade71500330010.110.112.4Special Grease (Clean Room) - G TypeConfigurable Type
1 Piece(s)

12 Days or more

107841 ~ 129[Light Preload] Light PreloadHigh Grade71500330010.110.112.4Special Grease (Heat Resistant) - L TypeConfigurable Type
1 Piece(s)

12 Days or more

1091056 ~ 274[Light Preload] Light PreloadHigh Grade92500500018.818.823.7Lithium Base Grease (Standard)Configurable Type
1 Piece(s)

12 Days or more

1091056 ~ 274[Light Preload] Light PreloadHigh Grade92500500018.818.823.7Special Grease (Clean Room) - G TypeConfigurable Type
1 Piece(s)

12 Days or more

1091056 ~ 274[Light Preload] Light PreloadHigh Grade92500500018.818.823.7Special Grease (Heat Resistant) - L TypeConfigurable Type
1 Piece(s)

12 Days or more

10121371 ~ 469[Light Preload] Light PreloadHigh Grade123600760034.03447.3Lithium Base Grease (Standard)Configurable Type
1 Piece(s)

12 Days or more

10121371 ~ 469[Light Preload] Light PreloadHigh Grade123600760034.03447.3Special Grease (Clean Room) - G TypeConfigurable Type
1 Piece(s)

12 Days or more

10121371 ~ 469[Light Preload] Light PreloadHigh Grade123600760034.03447.3Special Grease (Heat Resistant) - L TypeConfigurable Type
1 Piece(s)

12 Days or more

101516111 ~ 669[Light Preload] Light PreloadHigh Grade1569001350080.780.7104.3Lithium Base Grease (Standard)Configurable Type
1 Piece(s)

12 Days or more

101516111 ~ 669[Light Preload] Light PreloadHigh Grade1569001350080.780.7104.3Special Grease (Clean Room) - G TypeConfigurable Type
1 Piece(s)

12 Days or more

101516111 ~ 669[Light Preload] Light PreloadHigh Grade1569001350080.780.7104.3Special Grease (Heat Resistant) - L TypeConfigurable Type

Loading...

  1. 1
 

Basic Information

Set / Single Item Set Block Type Super Long Block-No Dowel Hole Rail Type Standard
No. of Blocks 1 Material Stainless Steel Ball Arrangement Miniature Type
Retainer N/A Rolling Element Ball

Frequently asked questions (FAQ)

質問: Are the block's ball bearings retained?
回答: Yes, all ball bearings are retained on Misumi linear guides.
質問: What is the seal material of you miniature linear guides?
回答: Nitrile Rubber (NBR).

Additional Products in this Category

Complementary Products

MISUMI Unit Example related to this product

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.