(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
General Piping Use Tube Fitting, Elbow
Nihon Pisco
[Features]
· One-touch fitting for general pneumatic pipes.
· Rich lineup.
· The take-off angle of the resin body can be changed after mounting.
· Centralized piping is supported.
· Light gray and clean room packaged types are available as options.
· Clean room packaging specification uses fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | Same day or more |
---|
Show Stock Products
Tube Fitting for General Piping - Straight
Nihon Pisco
An extensive lineup of one-touch fittings for general piping.
[Features]
· A one-touch fitting for general pneumatic pipes.
· The take out angle of the resin body can be changed after installing.
· Extensive lineup.
· Intensive plumbing is made possible.
· The triple type (PKD, PKG, and PKJ) and triple-double type (PKVD and PKVG) enable compact intensive plumbing.
· Light gray types, and cleanroom-packaged types available as options.
· The cleanroom packaging specification utilizes fluorinated grease.
· After cleaning with clean air, the fitting is packaged inside a cleanroom (ISO Class 6 EQUIV).
Days to Ship: | Same day or more |
---|
Show Stock Products
Tube Fitting Different Diameter Union Straight for Standard Pipe
Nihon Pisco
Many types of one-touch fittings for standard pipe.
[Features]
· One-touch fitting for general pneumatic pipes.
· Can change the take-off angle of the resin body after mounting.
· Various products available.
· Centralized piping is enabled.
Days to Ship: | Same day or more |
---|
Show Stock Products
Tube Fitting Union Straight for Standard Pipe
Nihon Pisco
Many types of one-touch fittings for standard piping.
[Features]
· One-touch fitting for general pneumatic pipes.
· Can change the take-off angle of the resin body after mounting.
· Diverse lineup.
· Centralized piping is supported
Days to Ship: | Same day or more |
---|
Show Stock Products
Junron One-Touch Fitting W Series (Spot Welding Equipment for Piping) Elbow
Junkosha
Nonflammable. Superior body strength and impact resistance. The tube grip is equipped with a rotating mechanism. All the sealing materials are water resistant NBR. No sealing tape is required. The R (PT) threads and resin connecting parts rotate.
[Features]
· All the resin sections conform to the UL94V-0 flame retardant rating.
· The pull-out strength of the R (PT) thread resin press-fit part has been improved in comparison to conventional parts.
· The shock resistance has been significantly improved by a new mechanism tube grip.
· The tube clip rotates smoothly inside the fitting and prevents tube from breaking due to rotation of the tube.
· NBR is used in the water-resistant O-ring and V-seal.
· The R (PD) threads are sealed. Therefore, wrapping the threads with sealing tape is not required.
· The combined part of the R (PT) thread of elbow tee and resin part can be rotated. After connecting, tube-piping direction can be freely implemented and the threads can be tightened even while the resin part is fixed.
Days to Ship: | 8 Days or more |
---|
Tube Fitting Union T for Standard Pipe
Nihon Pisco
Many types of one-touch fittings for standard piping.
[Features]
· One-touch fitting for general pneumatic pipes.
· Can change the take-off angle of the resin body after mounting.
· Diverse lineup.
· Centralized piping is supported
Days to Ship: | Same day or more |
---|
Show Stock Products
Chemifit C1 Series, 90° Elbow EL-C1
Nitta
90° Elbow EL-C1 is treated with a process that uses absolutely no oil. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.
Days to Ship: | 8 Days or more |
---|
SMC
Multi-connectors are used to attach panels to machine equipment. Multiple tubes (nylon, polyurethane) can be securely mounted and unmounted with a single action.
· Effective in reducing labor when separating panels from machinery for transport, and when replacing the units in case of malfunctioning, etc.
[Features]
· The unique positioning mechanism means that this product can be installed and removed with ease, even in places that are hidden from view, without any risk of misalignment caused in the course of detachment and reattachment.
· The simple mounting procedure helps reduce labor hours dramatically compared to using a number of bulkhead union fittings for panels.
· Allows for clamping and unclamping of all tubes with a single action
· Available in 6-tube or 12-tube models.
Days to Ship: | 3 Days |
---|
New Joint GWS□-□ Series [1 to 10 Pieces/Pack]
CKD
Push-in fitting for pneumatic piping. Compact size for space saving. Work environment and device-friendly flame-resistant white body.
Single straight fitting
Days to Ship: | Same day or more |
---|
Show Stock Products
Tube Fitting Branch Female Elbow for General Piping
Nihon Pisco
[Features]
· One-touch fitting for general pneumatic pipes.
· Various products available.
· Can change the take-off angle of the resin body after mounting.
· Centralized piping is enabled.
· Light gray types, and clean room packaged types optionally available.
· Clean room packaging specifications define the use of fluorinated grease.
· After purification with clean air, the item is package in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | 8 Days or more |
---|
for Corrosion Resistance Corrosion Resistant SUS303 Equivalent Fitting Bulkhead Union
Nihon Pisco
No copper-based metal used. Also optimal for low-concentration ozone measures.
[Features]
· Perfect when additional strength is required and when used in a corrosive atmosphere.
· Metal body uses special stainless steel whose corrosion resistance is SUS303 equivalent (Cr19 - 21%, Mo1.5 - 2.5% stainless).
· Copper based metal is not used.
· HNBR has been utilized in the sealing rubber material as part of efforts to reduce ozone concentrations.
Days to Ship: | 8 Days or more |
---|
Touch Connector Nipple Connector
Chiyoda
[Features]
· Selectable main body material of metal or resin types.
· Tubing is held by the spring force of "ACTIVE" edge. Most one touch fittings have a passive edge designed to achieve peak holding force only when tubing is pressurized, however the "ACTIVE" edge always holds the tube.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Threaded Connectors
MISUMI
•Application: Standard, Mini
•Type: One-Touch Couplings
•Thread Portion Material: C36000 Brass (Brass)
•Mounting Screw Direction: Threaded Connectors
Days to Ship: | Same day or more |
---|
Show Stock Products
Push to Connect Fittings - High Rotary Joints, Straight Connector
MISUMI
One-Touch Coupling for connecting tubes to swivel and rotary parts
Days to Ship: | 8 Days or more |
---|
for Clean Environment, Tube Fitting Polypropylene Type Elbow
Nihon Pisco
[Features]
· Polypropylene Material used for Clean Environment
· EPDM used for Rubber Seal.
· Oil-Free
· Visible Fluid by Transparent Body Color.
· Clean-Room packaging Option.
Days to Ship: | 8 Days or more |
---|
for Chemical Tube Fitting, Chemical Type, Union Y
Nihon Pisco
PPS is used for the main body material, delivering excellent heat resistance, flame retardancy, and chemical resistance.
[Features]
· The main body uses PPS resin for superior heat resistance, flame retardancy (UL94V-0), and chemical resistance properties.
· FKM is utilized in the seal.
· EPDM and NBR types available as optional extras.
· None of the used parts should be exposed to grease.
· Also compliant to Food Sanitation Laws of Japan (FKM type only).
· No need to worry about rust or metal ions.
· Available in two packaging specifications--normal packaging and clean room packaging--to fit specific applications.
Days to Ship: | Same day or more |
---|
Show Stock Products
Tube Fitting for Chemicals, Chemical Type, Straight
Nihon Pisco
PPS is used for the main body material for excellent heat resistance, flame retardancy, and chemical resistance.
[Features]
· The main body uses PPS resin having superior heat resistance, flame retardant (UL94V-0) and chemical resistance properties.
· Has option for using FKM in the seal area. Other options include NBR and EPDM.
· No need to worry about rust or metal ions.
· Selectable from two packaging specifications--normal packaging and clean room packaging--according to the specific application.
Days to Ship: | Same day or more |
---|
Show Stock Products
Tube Fitting for General Piping - Branch Tee
Nihon Pisco
[Features]
•One-touch fitting for general pneumatic pipe use
•Wide variety of options available
•In-situ adjustment of the resin body take-off angle
•Enables centralized piping
•Light gray and clean room packaged options available
•Fluorinated grease used to meet clean room packaging specifications
•Item is package in an ISO 6 clean room, following purification with clean air
Days to Ship: | 8 Days or more |
---|
General Piping, Tube Fitting, Plug
Nihon Pisco
[Features]
· One-touch fitting for general pneumatic pipes.
· Rich lineup.
· The take-off angle of the resin body can be changed after mounting.
· Centralized piping is supported.
· Light gray and clean room packaged types are available as options.
· Clean room packaging specification uses fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | Same day or more |
---|
Show Stock Products
Tube Fitting Union Y for Standard Pipe
Nihon Pisco
Many types of one-touch fittings for standard piping.
[Features]
· One-touch fitting for general pneumatic pipes.
· Can change the take-off angle of the resin body after mounting.
· Diverse lineup.
· Centralized piping is supported
Days to Ship: | Same day or more |
---|
Show Stock Products
Touch Connector Elbow Connector
Chiyoda
A vacuum-compatible one-touch fitting that boasts great drawing strength and durability. Elbow connector selectable from metal and resin.
Days to Ship: | Same day or more |
---|
Show Stock Products
Touch Connector H Type Nipple Connector
Chiyoda
One-touch fitting featuring high drawing strength and durability. Metal nipple connector.
[Features]
· By adopting the use of a special lock ring, the highest level of pull-out strength and durability is provided for one touch fittings.
· O-ring is switched to Viton packing, so that it can be used in high temperature applications (it is best suited for P flexible piping; make sure that you install an OF at the end, such as the CKN-6-01-H-OF).
· To insert a multi-layer tube, remove the outer layer and attach the one-touch coupling.
· The life of the tube is increased significantly if a standard metal cap is fitted to prevent exposure of the inner tube.
· All-metal types have excellent strength under tough conditions.
· Screw element sealing (R screw): Can be used for piping as-is due to screw element sealing.
· The body and screw elements of elbows and branch tees can rotate.
· *Not a rotary type.
Days to Ship: | 8 Days or more |
---|
Nitta
No jigs or tools are required for connecting tubes to this tee. The surface is resistant to degradation, preventing elution of copper ions.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Stainless Steel, 90° Elbow
MISUMI
All Stainless Steel One-Touch Couplings.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Heat Resistant, Hexagon Socket
MISUMI
One-Touch Coupling excellent in thermal resistance
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Heat Resistant, 90° Elbow
MISUMI
One-Touch Coupling excellent in thermal resistance
Days to Ship: | 8 Days or more |
---|
CKD
Push-in fitting for pneumatic piping. Compact size for space saving. Work environment and device-friendly flame-resistant white body.
Tee fitting
Days to Ship: | 8 Days or more |
---|
CKD
Push-in fitting for pneumatic piping. Compact size for space saving. Work environment and device-friendly flame-resistant white body.
Y tee fitting
Days to Ship: | 9 Days or more |
---|
Tube Fitting Polypropylene Type for Clean Environments - Union Elbow
Nihon Pisco
PP resin is used for the main body material, making it ideal for clean environments.
[Features]
· The main body uses Polypropylene resin suitable for clean environments.
· EPDM is utilized in the seal.
· FKM and NBR types available as optional extras.
· Polypropylene or SUS304 can be selected for the screw part.
· No oil permitted.
· Plastic body is clear colored to allow water flow to be observed.
· Selectable from two packaging specifications--normal packaging and clean room packaging--according to the specific application.
Days to Ship: | 8 Days or more |
---|
Tube Fitting Universal Elbow for Standard Pipe
Nihon Pisco
Many types of one-touch fittings for standard piping.
[Features]
· One-touch fitting for general pneumatic pipes.
· Can change the take-off angle of the resin body after mounting.
· Diverse lineup.
· Centralized piping is supported
Days to Ship: | 8 Days or more |
---|
Tube Fitting Universal Elbow with Hexagonal Hole for Standard Pipe
Nihon Pisco
Many types of one-touch fittings for standard piping.
[Features]
· One-touch fitting for general pneumatic pipes.
· Can change the take-off angle of the resin body after mounting.
· Diverse lineup.
· Centralized piping is supported
Days to Ship: | Same day or more |
---|
Show Stock Products
Tube Fitting Different Diameter Union T for Standard Pipe
Nihon Pisco
Many types of one-touch fittings for standard pipe.
[Features]
· One-touch fitting for general pneumatic pipes.
· Can change the take-off angle of the resin body after mounting.
· Various products available.
· Centralized piping is enabled.
Days to Ship: | 6 Days or more |
---|
for General Piping, Tube Fitting Bulkhead Union P
Nihon Pisco
[Features]
· One-touch fitting for general pneumatic pipes.
· Various products available.
· Can change the take-off angle of the resin body after mounting.
· Centralized piping is enabled.
· Light gray types, and clean room packaged types optionally available.
· Clean room packaging specifications define the use of fluorinated grease.
· After purification with clean air, the item is package in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | 8 Days or more |
---|
for General Piping, Tube Fitting Mini-Type Union Tee
Nihon Pisco
[Features]
· Ultra-small one-touch fitting for general pneumatic pipes.
· Reduced size with a volume ratio of 40% over the standard type.
· Elliptical release ring allows easy tube release.
· The φ1.8 mm type is an industry-first minimum one-touch type.
· Optimum for piping of small actuators and the like.
· Light gray types, and clean room packaged types are available as options.
· Clean room packaging specifications define the use of fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | Same day or more |
---|
Show Stock Products
for Corrosion Resistance, Corrosion Resistant SU303 Equivalent Fitting, Elbow
Nihon Pisco
No copper-based metal used. Optimal for handling low concentrations of ozone.
Days to Ship: | Same day or more |
---|
Show Stock Products
for Corrosion Resistance Corrosion Resistant SUS303 Equivalent Fitting Union Tee
Nihon Pisco
No copper-based metal used. Also optimal for low-concentration ozone measures.
[Features]
· Perfect when additional strength is required and when used in a corrosive atmosphere.
· Metal body uses special stainless steel whose corrosion resistance is SUS303 equivalent (Cr19 - 21%, Mo1.5 - 2.5% stainless).
· Copper based metal is not used.
· HNBR has been utilized in the sealing rubber material as part of efforts to reduce ozone concentrations.
Days to Ship: | 8 Days or more |
---|
Junron One-Touch Fitting M Series (for General Piping) Union
Junkosha
[Features]
· Electroless nickel plating is applied to metal parts as standard.
· The nickel plating in all brass parts of M series nipples and plastic bodies are standardized.
· Color seal for seal identification.
· Each of the different types of R (PT) screws are coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
· You can position the body in accordance with the removal direction of the tube.
・R (PT) screw parts of elbow/Tee and the resin joint part rotate allowing for free positioning according to the retrieval direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is fixed.
▪ The tube grip comes with a rotating mechanism.
▪ The tube grip rotates smoothly in the fitting thus preventing the turning of the tube.
Days to Ship: | 8 Days or more |
---|
Nitta
No jigs or tools are required for connecting tubes to this union tee. The surface is resistant to degradation, preventing elution of copper ions.
Days to Ship: | 8 Days or more |
---|
Push One E Series Brass Body Type Service Tee
Nitta
[Features]
· The tube is connected by Push One®.
· No need for jigs nor tools to connect the tube.
· Conductivity can be ensured by combining it with a UE tube.
· Flame retardant resin (equivalent of UL94 V-0 standard) adopted.
· Equivalent to UL94 V-0 standard, has superior self-extinguishing properties.
· Can be used in environments that sputtering occurs.
· The R threads are sealed, so there is no need to wrap them with sealing tape.
•Elbow and tee enable direction adjustment of the tube after tightening the screw.
Days to Ship: | 8 Days or more |
---|
One-Touch Fitting KQ2 Series Male Elbow KQ2L (Gasket Seal)【5-10 Pieces Per Package】
SMC
A one-touch fitting by SMC.
[Features]
· Improved tube insertion/removal.
· Compact and lightweight.
· Can be used with a vacuum pressure of -100 kPa or more.
· Body shape: Total of 51 models.
· Thread part material / surface treatment (with/without): 2 types.
· Available surface treatment: brass (no plating), brass + electroless nickel plating.
[Applications]
· Use for piping from female threads at right angles.
[See here for catalog]
· Applicable tube outer diameter (metric), Connection thread [M], Release button: oval (pp. 11) / circle (pp. 108)
· Applicable tube outer diameter (inches), Connection thread [UNF], Release button: oval (pp. 35) circle (pp. 140)
· Applicable tube outer diameter (inches), Connection thread [M], Release button: oval (pp. 52) / circle (pp. 160)
· Applicable tube outer diameter (metric), Connection thread [Uni], Release button: oval (pp. 90) / circle (pp.204)
· Applicable tube outer diameter (inches), Connection thread [Uni], Release button: oval (pp. 98) / circle (pp. 212)
Days to Ship: | Same day or more |
---|
Show Stock Products
Plug KQ2P One-Touch Fitting【5-10 Pieces Per Package】
SMC
Compact and lightweight one-touch fitting.
[Features]
· Improved tube insertion/removal.
· Compact and light weight.
[Applications]
· Use to plug unused one-touch fittings.
Days to Ship: | Same day or more |
---|
Show Stock Products
Union Y KQ2U: One-Touch Fitting【5-10 Pieces Per Package】
SMC
One-touch fitting by SMC.
[Features]
· Improved tube insertion and removal.
· Compact, lightweight.
· Can be used in vacuum to -100 kPa.
[Applications]
· Use to branch tubing in the same direction.
Days to Ship: | Same day or more |
---|
Show Stock Products
Push to Connect Fittings - Bulkhead Unions
MISUMI
•Application: Standard, Mini
•Type: One-Touch Couplings
•Thread Portion Material: C36000 Brass (Brass)
•Fitting Type: Union, Equal Dia.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Male 90° Elbows
MISUMI
•Application: Standard, Mini
•Type: One-Touch Couplings
•Thread Portion Material: C36000 Brass (Brass) or 304 Stainless Steel
Days to Ship: | Same day or more |
---|
Show Stock Products
Push to Connect Fittings - Manifold, Triple Single
MISUMI
One-Touch Coupling enabling to connect several fittings
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Type |
Body Material |
Seal Material |
Thread Portion Material |
Application |
Applicable Fluid |
Fitting Type |
Screw Mounting, Direction |
Elbows |
Screw Mounting, Branch |
Union, Equal Dia. |
Union, Unequal Dia. |
Sockets, Reducers |
For Swivel Part, Rotation Part |
Other Shapes |
Branch A |
Tube Size 1(φ) |
Tube Size 2(φ) |
|
| ||||||||||||||||||||||||||||||||||||||||||||
Brand | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Junkosha | Nihon Pisco | Nitta | SMC | CKD | Nihon Pisco | Nihon Pisco | Chiyoda | MISUMI | MISUMI | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Chiyoda | Chiyoda | Nitta | MISUMI | MISUMI | MISUMI | CKD | CKD | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Junkosha | Nitta | Nitta | SMC | SMC | SMC | MISUMI | MISUMI | MISUMI |
Product Series | Tube Fitting Different Diameter Union Straight for Standard Pipe | Junron One-Touch Fitting W Series (Spot Welding Equipment for Piping) Elbow | for Corrosion Resistance Corrosion Resistant SUS303 Equivalent Fitting Bulkhead Union | Push to Connect Fittings - High Rotary Joints, Straight Connector | for Clean Environment, Tube Fitting Polypropylene Type Elbow | Tube Fitting Polypropylene Type for Clean Environments - Union Elbow | Tube Fitting Universal Elbow with Hexagonal Hole for Standard Pipe | for Corrosion Resistance, Corrosion Resistant SU303 Equivalent Fitting, Elbow | for Corrosion Resistance Corrosion Resistant SUS303 Equivalent Fitting Union Tee | Junron One-Touch Fitting M Series (for General Piping) Union | One-Touch Fitting KQ2 Series Male Elbow KQ2L (Gasket Seal)【5-10 Pieces Per Package】 | ||||||||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Days to Ship |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 3 Days |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 6 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Specifications |
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||
Type | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings |
Body Material | Standard (PBT Polybutylene Terephthalate) | Brass | - | - | Flame Resistant Resin (UL94 V-0 equivalent) | - | PP Resin | - | Brass | - | - | Brass / Others | Stainless Steel303, Stainless Steel304 / Brass | - | PP Resin | PPS Resin | PPS Resin | - | - | - | Brass / Others | Brass | Flame Resistant Resin (UL94 V-0 equivalent) | 316 Stainless Steel | - | - | Flame Resistant Resin (UL94 V-0 equivalent) | Flame Resistant Resin (UL94 V-0 equivalent) | PP Resin | - | - | - | - | - | - | - | Standard (PBT Polybutylene Terephthalate) | Flame Resistant Resin (UL94 V-0 equivalent) | Brass | Standard (PBT Polybutylene Terephthalate) / Stainless Steel303, Stainless Steel304 / Flame Resistant Resin (UL94 V-0 equivalent) | - | Standard (PBT Polybutylene Terephthalate) | - | Brass | - |
Seal Material | - | - | - | - | Standard (NBR Nitrile Rubber ) | - | EPDM Synthetic Rubber | - | Standard (NBR Nitrile Rubber ) | - | - | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) / Fluororubber | Standard (NBR Nitrile Rubber ) | Fluororubber / EPDM Synthetic Rubber | EPDM Synthetic Rubber | Standard (NBR Nitrile Rubber ) / Fluororubber / EPDM Synthetic Rubber | - | - | - | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | H-NBR | Fluororubber | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | EPDM Synthetic Rubber | - | - | - | - | - | - | - | Standard (NBR Nitrile Rubber ) | H-NBR | H-NBR | Standard (NBR Nitrile Rubber ) | - | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) / Fluororubber | Standard (NBR Nitrile Rubber ) / Fluororubber | Standard (NBR Nitrile Rubber ) |
Thread Portion Material | Standard (Brass) | - | - | - | Standard (Brass) | - | PP Resin | - | Standard (Brass) | - | - | Standard (Brass) | Standard (Brass) / Stainless Steel303, Stainless Steel304 | Standard (Brass) | PP Resin | - | PPS Resin | - | - | - | Standard (Brass) | Standard (Brass) | Standard (Brass) | 316 Stainless Steel | Standard (Brass) | Standard (Brass) | - | - | - | - | - | - | - | - | - | - | No Thread | Standard (Brass) | Standard (Brass) | Standard (Brass) | - | - | Standard (Brass) | Standard (Brass) / Stainless Steel303, Stainless Steel304 | No Thread |
Application | Standard, Mini / Clean Environment | Standard, Mini / Clean Environment | Standard, Mini / Clean Environment | Standard, Mini / Clean Environment | Standard, Mini | Standard, Mini / Clean Environment | Standard, Mini / Clean Environment | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Clean Environment / Food, Pharmaceutical Related | Clean Environment / Food, Pharmaceutical Related / Heat Resistant | Clean Environment / Food, Pharmaceutical Related / Heat Resistant | Standard, Mini | Standard, Mini | Standard, Mini / Clean Environment | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Heat Resistant | Heat Resistant | - | Standard, Mini | Clean Environment / Food, Pharmaceutical Related | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini |
Applicable Fluid | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air / Chemical, Solvent | Air | Air | Water / Air | Water / Air | Water / Air | Water / Air | Air | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Air | Air | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air | Water / Air | Water / Air | Water / Air | Air | Water / Air | Water / Air | Water / Air | Water / Air | Air | Water / Air | - | Water / Air | Water / Air | Water / Air | Air |
Fitting Type | Screw Mounting, Direction | Screw Mounting, Direction | Union, Unequal Dia. | Union, Equal Dia. | Screw Mounting, Direction | Union, Equal Dia. | Screw Mounting, Direction | Other Shapes | Screw Mounting, Direction | Screw Mounting, Direction | Union, Equal Dia. | Screw Mounting, Direction | - | For Swivel Part, Rotation Part | Screw Mounting, Direction | Union, Equal Dia. | Screw Mounting, Direction | Screw Mounting, Branch | Other Shapes | Union, Equal Dia. | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Branch | - | - | - | Union, Equal Dia. | Union, Equal Dia. / Union, Unequal Dia. | Union, Equal Dia. | Screw Mounting, Direction | Screw Mounting, Direction | Union, Unequal Dia. | Union, Equal Dia. | Union, Equal Dia. | Screw Mounting, Direction | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. / Union, Unequal Dia. | Screw Mounting, Branch | Screw Mounting, Direction | Other Shapes | Union, Equal Dia. | Union, Equal Dia. | - | - |
Screw Mounting, Direction | Elbows | Straight | - | - | Elbows | - | Elbows | - | Straight | Elbows | - | Straight | Straight | - | Elbows | - | Straight | - | - | - | Elbows | Straight | - | - | With Hex SocketStraight | - | - | - | - | Elbows | Elbows | - | - | - | Elbows | - | - | - | - | Elbows | - | - | - | - | - |
Elbows | Male Elbows | - | - | - | Male Elbows | - | Male Elbows | - | - | Female Elbows | - | - | - | - | Male Elbows | - | - | - | - | - | Male Elbows | - | - | - | - | - | - | - | - | Universal Elbows | Universal Elbows with Hex Socket | - | - | - | Male Elbows | - | - | - | - | Universal Elbows | - | - | - | - | - |
Screw Mounting, Branch | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Branch Tees | - | - | - | - | Tee | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Branch Tees | - | - | - | - | - | - |
Union, Equal Dia. | - | - | - | Union Straight | - | Union Tees | - | - | - | - | Partition Unions | - | - | - | - | Union Y | - | - | - | Union Y | - | - | - | - | - | - | Union Tees | Union Y | Union Elbows | - | - | - | Partition Unions P | Union Tees | - | Union Tees | Union Straight | Union Tees | - | - | - | Union Y | - | - | - |
Union, Unequal Dia. | - | - | Unequal Dia. Union Straight | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Unequal Dia. Union Y | - | - | - | Unequal Dia. Union Tee | - | - | - | - | - | Unequal Dia. Union Tee | - | - | - | - | - | - | - |
Sockets, Reducers | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
For Swivel Part, Rotation Part | - | - | - | - | - | - | - | - | - | - | - | - | - | High Rotary Joints Straight | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Other Shapes | - | - | - | - | - | - | - | Unequal Dia. Sockets / Plugs / Others | - | - | - | - | - | - | - | - | - | - | Plugs | - | - | Nipples | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Others | - | - | - | - |
Branch A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tube Size 1(φ) | 3.97 ~ 16 | 3.97 ~ 16 | 6 ~ 16 | 4 ~ 16 | 6 ~ 12 | 4 ~ 16 | 4 ~ 12.7 | 4 ~ 6 | 4 ~ 12 | 3.97 ~ 12.7 | 4 ~ 12 | 4 ~ 12 | - | - | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 3.97 ~ 16 | 4 ~ 16 | 4 ~ 16 | 4 ~ 12 | 6 ~ 12 | 4 ~ 16 | - | - | - | 6 ~ 10 | 6 ~ 12 | 4 ~ 12 | 3.97 ~ 16 | 4 ~ 12 | 3.97 ~ 16 | 4 ~ 12 | 1.8 ~ 6.35 | 4 ~ 16 | 4 ~ 16 | 4 ~ 12 | - | 8 ~ 12 | 4 ~ 10 | - | 4 ~ 10 | - | - | - |
Tube Size 2(φ) | - | - | 4 ~ 12.7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 4 ~ 8 | - | - | - | 3.97 ~ 16 | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Applicable Tube O.D.1>2>3
Applicable Tube O.D.1>2>3
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy