Push to Connect Fittings（Elbows：Male Elbows）

• 

  General Piping Use Tube Fitting, Elbow

  Nihon Pisco

  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Rich lineup.
  · The take-off angle of the resin body can be changed after mounting.
  · Centralized piping is supported.
  · Light gray and clean room packaged types are available as options.
  · Clean room packaging specification uses fluorinated grease.
  · After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Chemifit C1 Series, 90° Elbow EL-C1

  Nitta

  90° Elbow EL-C1 is treated with a process that uses absolutely no oil. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  for Corrosion Resistance, Corrosion Resistant SU303 Equivalent Fitting, Elbow

  Nihon Pisco

  No copper-based metal used. Optimal for handling low concentrations of ozone.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Touch Connector Five Male Elbow

  Chiyoda

  Lightweight, one-touch fitting with a flame-retardant resin. Male elbows.
  
  [Features]
  · Unnecessary parts have been eliminated and the sizes of remaining parts have been minimized to achieve the ultimate cost performance.
  · Further weight reduction achieved by making body parts all resin.
  · Utilized a new lock ring to achieve a joint function to perform piping work more smoothly and securely.
  · Used new packing to reduce the connecting operation force while maintaining high airtightness.
  · The model identifiers have been inscribed on products using an all-item laser marking process.
  · A standard, flame-retardant resin has been adopted.
  · Screw part sealing (R screw): Can be used for piping as-is because the threaded part has been sealed.
  · The body and screw parts of elbows can rotate.
  　*This is not a rotary type. Note that all-resin types do not rotate.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Touch Connector FUJI Male Elbow

  Chiyoda

  A one-touch fitting with a rotation locking ring to prevent from turning and breaking. A male elbow with a body manufactured from metal or resin.
  
  [Features]
  · All-metal type fittings demonstrate excellent strength under tough conditions. The resin body type fittings are lightweight.
  · Pipes connected to different machines can be easily identified by attaching display rings (sold separately).
  · A rotating locking ring type for preventing full rotation of the tubes.
  · The threaded section has been seal processed—enabling pipes to be used directly.
  · The body and thread section of the elbows and branch tee are rotatable.
  · *This is not a rotary type fitting.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Touch Connector H Type Elbow Connector

  Chiyoda

  A one-touch fitting with high pull-out strength and durability. Metal elbow connector.
  
  [Features]
  · Utilizes a special locking ring to provide maximum pull-out force and durability for this one-touch fitting.
  · The O-ring has been replaced with a Viton® packing seal to support high temperatures. Optimally suited to P flexible piping (please install an OF, such as CKN-6-01-H-OF, at the end).
  · To insert multilayered tubing, peel off the outer section and install the one-touch coupling.
  · The life of the tube can be increased significantly by fitting a standard metal cap to prevent exposure of the inner tube.
  · All-metal types have exceptional strength under tough conditions.
  · Thread section sealing (R thread): The thread section is sealed. Therefore, the fitting can be used directly for piping.
  · The body and thread section of the elbows and branch tee are rotatable.
  · *This is not a rotary type fitting.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  New Joint GWL □-□- Series

  CKD

  Push-in fitting for pneumatic piping. Compact size for space saving. Work environment and device-friendly flame-resistant white body.
  Single elbow fitting

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Chemifit C1S Series, 90° Elbow EL-C1S

  Nitta

  [Features]
  · A completely oil-free processed product — parts are washed and assembled in a cleanroom. No oil or grease is used even for the sealing material.
  · The tube is connected by a PushOne® fitting: No jigs nor tools are required for connecting the tube.
  · The thread section is made of SUS304 for superior strength.
  · Double clean packaging: Each item is packed individually in a cleanroom and then packaged inside a zip-seal bag.
  · The main body and thread section rotate. The orientation of the elbow, tee, etc., can be decided when connecting the tubes.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  PushOne E Series 90 Degree Elbow

  Nitta

  A 90-degree elbow that does not require jigs or tools for connecting to tubes. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  
  [Features]
  · The tubes are PushOne® type fittings.
  · Requires no jigs or tools for connect to the tubes.
  · An electrogalvanized product.
  · Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  · A flame retardant resin (UL94 V-0 standard EQUIV) is utilized.
  · A flame-retardant PBT resin is utilized in the material.
  · A UL94 V-0 standard fitting with superior self-extinguishing properties.
  · This fitting is usable in spatter dispersion environments.
  · The R threads are sealed. Therefore, wrapping the threads with sealing tape is not required.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	7 Days or more

• 

  New Joint Mini Type GWJL □-□ Series

  CKD

  [Features]
  · Space saving type with more compact body size.
  · Piping dead space can be markedly reduced
  · Single elbow type

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  for Clean Environment, Tube Fitting Polypropylene Type Elbow

  Nihon Pisco

  [Features]
  · Polypropylene Material used for Clean Environment
  · EPDM used for Rubber Seal.
  · Oil-Free
  · Visible Fluid by Transparent Body Color.
  · Clean-Room packaging Option.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  for Clean Environment, Tube Fitting Polypropylene Type Elbow, Screw Element SUS304

  Nihon Pisco

  [Features]
  · This tube fitting serves best where strength is required or the atmosphere contains chemicals.
  · Seal material is made of FKM.
  · Metal unit is made of SUS304.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  for Chemicals, Tube Fitting Chemical Type Elbow

  Nihon Pisco

  PPS is used for the main body material for excellent heat resistance, flame retardancy, and chemical resistance.
  
  [Features]
  · PPS is used for the main body material for excellent heat resistance, flame retardancy (UL94V-0), and chemical resistance.
  · FKM is a use option for the seal. Other options include NBR and EPDM.
  · None of the parts used must be exposed to grease.
  · Also compliant with the Food Sanitation Law of Japan (FKM type only).
  · No need to worry about rust or metal ions.
  · Two packaging specifications are available to suit the application, normal packaging and clean room packaging.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  for Anti Static, Tube Fitting EG, Elbow

  Nihon Pisco

  Optimal for lines requiring static electricity dissipation and anti-static properties.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Tube Fitting Sputter Elbow for Sputtering Resistance

  Nihon Pisco

  [Features]
  · Flame-retardant resin is used.
  · Sputter resistance property (spark) is superior (V-0 equivalent*).
  · *UL94 V-0: Standard enacted by an American private test institution (established by an American fire underwriter) which ranks self-extinguishing materials based on four levels: V-0, V-1, V-2, and HB, where V-0 is the most difficult rank to achieve.
  · Equipped with release ring cover.
  · Prevents operation failure of release ring caused by sputtering.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Days or more

• 

  Tube Fitting Brass Elbow for Sputter Resistance

  Nihon Pisco

  The main body and release ring are made of brass for superior flame retardancy and sputtering resistance.
  
  [Features]
  · Available sealing rubber materials include HNBR, FKM, and NBR.
  · Ideal for environments exposed to sparks.
  · Release ring made of brass offers excellent flame retardancy and sputter resistance.
  · The type with a cover prevents dust and sputter from getting through to the internal fittings.
  · An optional sputter cover prevents fine sparks from entering.
  · By using a release ring cover (CS – sold separately), sparks that penetrate through the gap between the release ring and the tube cannot get close.

  • Volume Discount

  Days to Ship:	Same day or more

  Show Stock Products

• 

  for Sputtering Resistance, Tube Fitting Brass Elbow, Coverless

  Nihon Pisco

  [Features]
  · Superior in Flame-Retardant and Spatter-Proof by its Brass Made Release-Ring.
  · Avoids Spatter and Dusts by Optional Protective Cover.
  · HNBR or FKM for Seal Rubber Selection

  • Volume Discount

  Days to Ship:	Same day or more

  Show Stock Products

• 

  for Corrosion Resistance, SUS304 Fitting, Elbow

  Nihon Pisco

  [Features]
  · This tube fitting serves best where strength is required or the atmosphere contains chemicals.
  · Seal material is made of FKM.
  · Metal unit is made of SUS304,

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  for Mold Cooling, Mold Temperature Control Fitting, Stop Valve Built-in, Elbow with One-Touch Fitting, Plug

  Nihon Pisco

  [Features]
  · Push-In Fitting Type for Die Temperature Control.
  · Thermal Oil, Clean Water and Air for Fluid Medium.
  · No Projection left on the die, after uncoupling Plug.
  · Stop Valve Built-In Type prevents Hot Water Ejection when uncoupling Plug.

  • Volume Discount

  Days to Ship:	15 Days or more

• 

  Mold Cooling Mold Temperature Control Joints Stop Valve Built-in Type One-Touch Fitting Elbow

  Nihon Pisco

  One-touch fittings for mold cooling. No protrusions remain on the die after the plug is removed.
  
  [Features]
  •One-touch fittings for mold cooling.
  •The usable fluid includes 3 types: heating medium oil, (fresh) water and air.
  · No protrusions remain on the die after the plug is removed.
  · Built-in type stop valve prevents warm water outflow when the plug is attached or removed.

  • Volume Discount

  Days to Ship:	15 Days or more

• 

  Mold Cooling, Mold Temperature Control Joints, One-Touch Fitting Elbow

  Nihon Pisco

  One-touch fittings for mold cooling. No protrusions remain on the die after the plug is removed.
  
  [Features]
  •One-touch fittings for mold cooling.
  •The usable fluid includes 3 types: heating medium oil, (fresh) water and air.
  · No protrusions remain on the die after the plug is removed.
  · Built-in type stop valve prevents warm water outflow when the plug is attached or removed.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  for Fixture Cooling Fixture Temperature Adjustment Fitting Elbow with One Touch Fitting Plug

  Nihon Pisco

  One-touch fitting for mold cooling. No projections remain on the die after the plug is removed.
  
  [Features]
  · One-touch fitting for mold cooling.
  · Working fluids include 3 types: thermal oil, (fresh) water and air.
  · No protrusion on the mold remains after the plug is removed.
  · Stop valve built-in type prevents warm water outflow when the plug is attached or removed.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Touch Connector Five SUS Male Elbow

  Chiyoda

  Stainless steel one-touch fitting with improved strength and corrosion resistance. Male Elbows.
  
  [Features]
  · Improved strength and corrosion resistance.
  · Prevents elution of metal ions such as copper and zinc.
  · Component corrosion prevention for industrial piping (de-zincification corrosion): improved performance via use of SUS303 for the metal portion of the main body.
  · Inherits the high performance of the touch connector five: inherits the performance of touch connector five as-is.
  · Upper threading flexibility: the elbow and branch tee part body and thread elements can be rotated.
  · Not a rotary type.
  · No attempt was made to seal the threaded part given concerns regarding clean piping.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Touch Connector Mini Male Elbow

  Chiyoda

  Ultra-compact one-touch fitting useful for reducing space occupied by piping. Male elbow.
  
  [Features]
  · Ultra-small, reducing piping space.
  · Electro-less nickel plating, which provides superior corrosion resistance properties, is used.
  · A hex recess type male connector (straight) is used to save space.
  · Rotation lock ring prevents full rotation of the tube.
  · The body and screw elements of the elbows and branch tees can rotate.
  · *Not a rotary type.
  · Screw element sealing (R screw): Can be used for piping as-is due to screw element sealing

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Touch Connector Elbow Connector

  Chiyoda

  A vacuum-compatible one-touch fitting that boasts great drawing strength and durability. Elbow connector selectable from metal and resin.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Touch Connector Fuji, H Type, Cast Male Elbow

  Chiyoda

  [Features]
  · This new fitting has a protection sleeve which prevents weld spatter from adhering around the release level.
  · Most one touch connectors have a plastic release ring only and they are often damaged by weld spatter

  • Volume Discount

  Days to Ship:	13 Days or more

• 

  Touch Connector Five, H Type, Cast Male Elbow

  Chiyoda

  [Features]
  · Touch Connect FIVE H type utilizes an all-metal main body that is resistant to weld spatter.
  · Metallic spatter cap protects the release ring and guide from weld spatter and also acts as the release ring.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Touch Connector FUJI H Type Male Elbow

  Chiyoda

  A male elbow with a sturdy metal exterior ideal for environments where sparks are generated.
  
  [Features]
  · All-metal types and resin body types available.
  · All-metal types have excellent strength under tough conditions, while the resin body types are lightweight.
  · Pipes connected to different machines can be identified easily when display rings (sold separately) are attached.
  · Rotation lock ring type, preventing full rotation of tube.
  · Screw part sealing (R screw): Can be used for piping as-is because the threaded part has been sealed.
  · The body and screw parts of elbows and branch tees can rotate.
  · *This is not a rotary type.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Junron One-Touch Fitting M Series (for General Piping) Elbow

  Junkosha

  [Features]
  · Electroless nickel plating is as standard applied to metal parts.
  · The nickel plating in all brass parts of M series nipples and plastic bodies is standardized.
  · Color seal for seal identification.
  · Each of the different types of R (PT) screws is coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
  · You can position the body in accordance with the removing direction of the tube.
  ・R (PT) screw parts of elbow/Tee and the resin joint part rotate allowing for free positioning according to the retrieval direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is fixed.
  ▪ The tube grip comes with a rotating mechanism.
  ▪ The tube grip rotates smoothly in the fitting thus preventing the turning of the tube.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Junron One-Touch Fitting W Series (Spot Welding Equipment for Piping) Elbow

  Junkosha

  Nonflammable. Superior body strength and impact resistance. The tube grip is equipped with a rotating mechanism. All the sealing materials are water resistant NBR. No sealing tape is required. The R (PT) threads and resin connecting parts rotate.
  
  [Features]
  · All the resin sections conform to the UL94V-0 flame retardant rating.
  · The pull-out strength of the R (PT) thread resin press-fit part has been improved in comparison to conventional parts.
  · The shock resistance has been significantly improved by a new mechanism tube grip.
  · The tube clip rotates smoothly inside the fitting and prevents tube from breaking due to rotation of the tube.
  · NBR is used in the water-resistant O-ring and V-seal.
  · The R (PD) threads are sealed. Therefore, wrapping the threads with sealing tape is not required.
  · The combined part of the R (PT) thread of elbow tee and resin part can be rotated. After connecting, tube-piping direction can be freely implemented and the threads can be tightened even while the resin part is fixed.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Push One A Series 90° Elbow

  Nitta

  No jigs or tools are required for connecting tubes to this 90° elbow unit. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	11 Days or more

• 

  PushOne E Series Brass Body Type - 90 Degree Elbow

  Nitta

  No jigs or tools are required. Combine with a UE tube for conductivity. Supports UL94 standard V-0 equivalent for self-extinguishing. For use in environments with spatters.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	7 Days or more

• 

  Push-in Fittings - WP Series - Mail Elbow

  Myotoku

  [Features]
  · Fitting consists of a minimal 6 parts.
  · New lock ring to tightly connect and softly separate the tube.
  · Implements a joint function that carries out work more smoothly and reliably.
  · The secret to excellent reliability is the ring packing which reduces the connection operation power of the tube and maintains air-tightness.
  · PA+F/G resin (polyamide) is used as standard.

  • Volume Discount

  Days to Ship:	8 Days or more

Loading...